Steering Box restoration - 28 Land Rover Series 3 Project

No video

Steering Box restoration - 28 Land Rover Series 3 Project

Рет қаралды 3,630

Күн бұрын

In this video I show you how to strip, clean, paint and restore a steering box. I also go into the truth of trying to fit Britpart bearings and some of the realities of parts supply problems.

Пікірлер: 20

@kevlandy 2 ай бұрын

I find cleaning stuff up quite therapeutic.🇬🇧👌

@lozl 2 ай бұрын

I couldn't agree more. I love it

@porteog Жыл бұрын

I did mine recently and had the same problem, big old gap at the bottom end. Used loads of shims to sort it but it still leaks. Quite how Land Rover mass produced these steering boxes back in the day is anyone's guess - I'm glad it wasn't my job!

@lozl Жыл бұрын

Thanks for the comment, much appreciated. Yeah its not the greatest bit of mass produced engineering. If it were my land rover I'd be trying to graft something modern in there.

@JimJamJammer Жыл бұрын

I’d rather have a system that is repairable rather than not! With a Land Rover everything is accessible and repairable unlike modern vehicles. The other beauty is you can have parts made if needed. I use high grade lithium complex grease on bearing such bearing to aid the assembly process and also to prevent high friction issues which works well. I did drive my Series 3 daily and the steering box in particular gets used quite heavily as you can imagine! Britpart parts are rubbish and I avoid them totally where possible. It’s worth time and money looking else where. Good job done! Find a local mechanist who can make parts if needed.

@lozl Жыл бұрын

Thanks Jim, yeah this was a tricky one as the owner was getting a little "spend shy" at this point. I would have liked to put some more money into the steering box really.

@JimJamJammer Жыл бұрын

@@lozl Have a look at Church House Classics....Richard. He also had a FAFF but nailed it by thinking it over. That takes up a lot of my time. End result...smiles and happiness to accomplish such jobs.

@lozl Жыл бұрын

@@JimJamJammer Wow he has a lot of land rover videos. Good videos too. I hadn't heard of him before. I've often found there to he a lot of good help out there when it comes to this land rover project. Its refreshing having done projects where there is no help at all.

@elgrimio 7 ай бұрын

Hey Loz! Love your videos. What do you use to spray your components on this and the engine rebuild? Thanks!

@lozl 7 ай бұрын

Hi thanks for the kind comment. You're not gunna like it..... the black painted parts have had hammerite. I find hammerite to be an awful paint to brush paint... its useless. But when thinned and sprayed it works very well. My reliant scimitar chassis was sprayed with hammerite well over 10 years ago and is still looming very good. The engine was an engine enamel I bought from ebay to get the colour correct. That seems to have hardened up to a really nice toigh finish.

@dizzy_cap_car_show Жыл бұрын

Gota be mad max right? 🙏 not 100% tho! I’m loosing my touch man’ 😂 Good vid man! 😎👍

@lozl Жыл бұрын

You'reosing it man! Gran turino

@dizzy_cap_car_show Жыл бұрын

@@lozl AAAAARRRRRRR!!!! DAM IT!!! 😂

@lookcreations Жыл бұрын

I’ve stripped two of these series boxes, both had failed thrust races each end and both damaged the ball screw ….. which you can’t get hold of🤬

@lozl Жыл бұрын

I've found getting hold of parts to be an absolute nightmare, specifically parts of a known and good quality, I first discovered this problem with the V8 engine rebuild. It's a pain in the arse! Thabks for the comment. Much appreciated.

@lookcreations Жыл бұрын

@@lozl there’s a firm in Birmingham that can make the steering box worm n screw. But I understand the ‘engineer’ that does them has poor health and as such hasn’t been able to run the machines for a long time- I’ve been trying to get the parts for 9 months . A replacement column n box ex Britpart is £600 near as no matter vs £250 for the column screw. 🤬

@PaulMcGuinness Ай бұрын

Quel surprise... **itpart replacement is the wrong size. Who would have thunk it? 😂🤣

@lozl Ай бұрын

Honestly, of all the projects I have done over the last several years, finding good quality parts has always been the biggest challenge

@simonkorzec9315 29 күн бұрын

Thank you for sharing the issue you had with the replacement bearing races. I spent hours reassembling the box and each time had that 2-3mm gap. Followed your solution and reused the originals. I did use the new ball bearings. Worked great. Hopefully this saves someone else from wasting their Sunday.

@lozl 29 күн бұрын

@@simonkorzec9315 Cheers Simon, glad it was of help to you. I wish I could have got the proper kit in time. Ideally it wanted a whole new steering shaft but those are pretty tricky to find. Thanks again for taking the time to comment