Step by Step beginner guide to beadrolling: How to beadroll artwork

Рет қаралды 34,374

2 жыл бұрын

In this video I cover simple bead roller artwork using a Mittler brothers 36" bead roller and stencil bead roller dies.
-Mitter Brothers Stencil dies (part number 202-089)
-Artwork layout onto an aluminum panel
-Basic linework and how to make perfect corners
Follow me on Facebook and Instagram: @FHPdesign

Пікірлер: 42

@brianmichaud3668 6 ай бұрын

Super video, I learned a lot from it

@lauriekehn6587 2 жыл бұрын

v Very good video ! Thanks for explaining all the little details.

@davidcooper708 Жыл бұрын

Great demonstration and share of knowledge, you won’t upset me if you post more content like this 👌

@troyfabrication 2 жыл бұрын

Great video! Thanks for sharing!

@roxybo1 2 жыл бұрын

great video! easy to follow and very instructional

@csdrag 2 жыл бұрын

Great job on explanations. Look forward to seeing video and explanations on more detailed rolling.

@fhpdesign87 2 жыл бұрын

Thanks for the feedback! I definitely would like to find a good way to do more in depth artwork. I want to get some of the basics in to start, or im afraid it may be alot for beginners to swallow.

@79366813arizona 2 жыл бұрын

Best demonstration ever

@MatthewScott 2 жыл бұрын

Awesome man. Thank you.

@crlowther 2 жыл бұрын

Awesome video, thank you!

@joell439 2 жыл бұрын

Thank you for all the tips 👍👍😎👍👍

@benniecantrell6901 2 жыл бұрын

great video steve

@IngeBall 2 жыл бұрын

Very nice!

@doublediamondgarage3031 2 жыл бұрын

Excellent work!

@fhpdesign87 2 жыл бұрын

Thank you!

@4legdfishman Жыл бұрын

Nice work! Great explanation. New subscriber! I don't own a bead roller... YET.

@tonyc7352 6 ай бұрын

Great camera setup

@latenitefab 2 жыл бұрын

Really informal video. I'd watch more. I just picked up a Power Bead roller. I'm just jumping in and looking for as much info for a bigger to soak up the machine. I'm a welder and fabricator I'd just really like to do more of the body panel and sheet metal work for engine bays along with some decorative art stuff to learn.

@fhpdesign87 2 жыл бұрын

We will definitely be doing more! Thanks!

@kravazuta5594 3 ай бұрын

❤Cool.

@itsalldoable Жыл бұрын

Hi Steve, Great video, thank you for making it and sharing. 👍 I've just bought a manual bead roller for some panels I have to make for the classic car build. I am a total novice as far as this skill is concerned. I do not have a table with my roller and I will be rolling steel. Do you think the same principle will work for me as regards producing a distortion free panel. I also plan to service my "new to me" roller as it feels a very slightly notchy. Kind regards Paul from 48 Spokes 🇬🇧

@user-ji2ft7ds9d 2 ай бұрын

رائع جداً ❤

@michabasek1563 Жыл бұрын

I just starting my adventure with beadrolling. This demonstration was very helpful :) Idea with projector and drawing it is a answer of my question how to do it to transfer draw on the metal. Like and sub for you :)

@glenncattanach3073 2 жыл бұрын

Great video. Any future videos you might consider using video fast forward more to tighten up the video length. The background audio was good but could be a little lower gain.

@fhpdesign87 2 жыл бұрын

Thanks Glenn. We let this one get a little longer since there was a good deal of information, but I agree. I am trying to find a happy medium between timeliness and plenty of information.

@brady1929 2 жыл бұрын

Love your videos and the work you do on the Facebook, "I love Bead Rolling" thread. Did you space out the upper and lower dies? Thanks.

@fhpdesign87 2 жыл бұрын

Yes I did on the later passes. That will give you that nice "rolled" edge as opposed to more of a hard cornered "step"

@randywilliams2505 2 жыл бұрын

@FHPDESIGN does the cork lined straight edge cut down on scratching? Thanks for sharing.

@fhpdesign87 2 жыл бұрын

I believe so. I have a Couple scales with tape on one side, and still prefer that one.

@domkelly1972 2 жыл бұрын

haha hilrious . you pretty much did our logo at MB custon designs

@MatthewScott 2 жыл бұрын

He did the mittler brothers logo. So how do you figure?

@Chad_N_Stacey_Hopson Жыл бұрын

I found a 24" billet Jamey Jordan w/ adj. upper, table, & the industrial VS motor for $1600 that had only been used twice..... Now I'm trying to find out which dies I need to get..... If I go with the Eastwood motorized set they are around $400 for 10 of the more Popular dies.... Or would you recommend I get the Art Roll Kit from MB?? Thanks for the Info and teaching us Newbie's how to do this....

@fhpdesign87 11 ай бұрын

The mittler brothers stencil die kit is all I use 99% of the time

@MakerMatt0512 7 ай бұрын

What program are you using on your computer?

@nalynferrer1096 11 ай бұрын

Hm this machine ty

@fransvanderkraan76 2 жыл бұрын

Hallo,what is the thickness of the aluminum?

@fhpdesign87 2 жыл бұрын

.063" or 1.6mm

@fransvanderkraan76 2 жыл бұрын

Thanks and Merry Christmas.

@BadPennyDogBoy Жыл бұрын

Great video, but spoiled by the unnecessary background noise.

@ksgjlg 2 жыл бұрын

I could do without the music but great video. Woukd like a little more info on dies and spacing

@fhpdesign87 2 жыл бұрын

The dies are mittler brothers item number 202-089. Die spacing, I do alot of it by feel, but I usually start just a little wider than the material thickness (.063" here), then move wider one adjuster turn at a time typically. Hope this helps!