Outstanding vid!!!

After having destroy several connectors, calming from several nervous breakdown, watching tons of dirty fingers videos of Guys trying to explain wath they dont really know, i finaly see inside this "bloody" plug AND undersdand how it works ! You have my respect for eternity and maybe more.........

Excellent video! This is, by far, one of the best videos explaining how these plugs work! Thank you!

About ten years ago I thought about doing this video, but I didn't have the close focus gear or motivation to do it. You've come along and raised the bar, with surprisingly good editing and technical skill. Worth the sub, for sure.

Absolutely the best pin connector video ever. Thank you for such a thorough explanation.

It has already been said but i agree that this is the best video i have ever seen showing how you remove the wires from electrical connectors, the cut away plugs and the clear focused camera was excellent. Thank you sir for making it because it has helped me greatly.

I watched so many videos trying to figure out how to do this for my exhaust valve wiring harness because I want to put heatproof wrap on it but didn't want to cut the harness. Thank you for making such a good video which explains it so well!

Thank you for taking the time showing the cutouts!!!! Amazing help. Best

Thanks for watching, Hopefully this makes repairing wiring a little bit easier for you😊 please subscribe to help grow the channel👍👍

ive been on youtube for hours. your video explained to me how pins are held in place and because of the connector cut in half, i was able to understand how to pull pins from a 16pin green andriod car head terminal and from the small canbus connector, just because you explained how the locking mechanism works. Thank you

Great Vid. The first person to really explain it with the dissections.

Wow absolutely awsome video sir.the reason i say this,is that by the very fact of you slicing open the respectice plug and socket,ive finally been able to see how these actually lock,thanku😊

Clear camera focus on the connectors and depinnining well demonstrated 👍

Very useful. I'm trying to diagnose a powerbank that won't charge from AC power and wanted to use the solar power cable to troubleshoot. This helped me disassemble the weatherproof plugs without mauling them too bad

Good video, i Like the cut down connectors for a detailed explanation 👍

So I spent about $70 for some connectors and tools, Took a deep breath and started working on depinning some wires before I attack the beast and ruin a wiring harness in my car. Thanks for the detailed description of the hammer and how to engage lifting up motion. It worked, removed three pins. It is going to take a bit to develop the right touch. Visualizing that hammer and you lifting up helped. Thanks.

Thanks dad! :) Great video

That was really useful, especially the cut away 👌🏻🔧

I have done this countless times in IT and RF Telcom and I have both bought and fabricated extraction tools

Excellent video, thanks for taking the time to share. Cheers

Great and detailing tip ! thanx

Great video and the music is the best!

Thank you! A really helpful lesson.

Great video. Really informative .

Very very good video, thanks a lot for explaining and showing everything in such detail! Will use some of these connectors on my bike soon :)

Great video

Magnificent video! Thank you very much for sharing. Cheers. Subscribed.

Thanks, it all helps when your in a bind with a corroded connector/ and no light/ in a tough spot.

This was pretty good. Speeding through things without the real closeups that you need doesn't help. At the beginning that can leave someone wanting as far as real detail. The last part where you took the Dremel and cut the connector for a lateral peak at the inside was great. Anybody that didn't understand what was going on from there was never gonna figure this out. I had the professional keys to get the connector out and it was still a bit of a challenge to get the wire out. I did get it and your video was the guidance I needed to get it out. 😊 This is a great video. Just a little more detail at the beginning for goober like me would pay off bigtime. Thanks again.

Thanks been hoping for this

Very good video brother.

Helped a lot ty

First class post!

Specialized tools are available for different types of these connectors,but I have fabricated several different ones from slivers of stainless sheet and old paint brush handles.Looks like you have a nice compact set for round pin Amphenol connectors.This is so much better than splicing a new pigtailed one onto the original wiring.

thank you

Thanks mate😊

depinning is the most frustrating task, nice cut away to show the different types of locks used

感恩了解，謝謝分享！

thank you.

EXCELLENT!

You can buy extractors and inserters for the connectors you work on most frequently. But, in a pinch your idea is good.😊

brilliant

Life saver

1:20 THANK YOU ....THANK YOU ....THANK YOU! 😁

nice 👍🏻

Have you considered adding the JAE connectors to this video

Excellent. About to replace an OBD port with a wrecked pin (and one loose one) After hours of trying, I could not remove the pins at all, and ended up drilling the worst one out! I thought I'd be into cutting all the wires and crimping on replacement pins for the new block. I might just get away with doing a single pin and releasing the rest - you may just have saved me from torching the vehicle 👍🍺 *I have to wonder though, what situation designers had in mind? Do people really remove harnesses and use them to swing from trees at the weekend, remove tree stumps, tow horse boxes? Couplings seem to be severely overengineered - I bet it was the Germans... "In zis scenario, der driver he is hanging die shoppink tasche of many dunkel biers from das wiring harness und driving up a shteep and rocky berg - den coupling is out coming - die automobile ist kranken, dem tasche is fallen, und alles bottles gebroken - ist catastrophe! Telefon Deutsches Institut für Normung- Schnell! Rasch!" 😉

I have bought the first one 2 pin waterproof… you did the demo on but mine just won’t release? Do the cheap ones come apart?

Question / Advice . So I accidentally damaged a connector for a car at the base ( where the wire goes into the plastic housing ) Would it be possible to pry open the little metal sleeve , remove the cut wire, and simply insert the remainder of the good wire back into the metal sleeve and squeeze it tight again then insert ???

👍

Where do you buy replacement pins?

I couldn't manage to remove the red securing clamp of the female part of the connector. Sadly you don't show this. Is it necessary to remove the clamp in order to insert the contacts?

Yes but before any of that, you absolutely must know what type of connector you're dealing with in order to determine what type of detent mechanism it uses. Otherwise you'll spend hours on end and usually destroy either the jacket or the pin. Ask me how I know.

I have been doing this wrong for many years.

Good job but music is annoying

noice

A++++++++++++

Thank You. I got mine out using a tine on my table fork.