Step by step how to fix the problem mercedes electronic steering lock with esl emulator , full video

Рет қаралды 159,647

2 жыл бұрын

2011 mercedes c300 with a message “remove the key from ignition”
It has bad esl electronic steering lock on lock position .
Complete step by step from start to finish
Removal and installation
Replacing it with esl emulator
Please support me by donating so i can keep making great content.
Paypal: autopurlieu@gmail.com
Cashapp: $AutoPurlieu
Venmo: @Legend_gary
Thank you
Join this channel to get access to perks:
/ @autopurlieu

Пікірлер: 434

@csixtythree 10 ай бұрын

this is literally the best video for this problem. ive dealt with this on a few cars and when i need to double check on a step i come back to this video

@autopurlieu 10 ай бұрын

Thank you, I appreciate that 🙏

@robertroldan4736 Жыл бұрын

such a good mechanic and has a good memory to put back everything....excellent job.

@autopurlieu Жыл бұрын

Thank you sir. I try my best to organized in my own memory lol

@jamespipkin373 Жыл бұрын

That hood will go straight up 90° got to love German ingenuity

@godswillbinitie5150 7 ай бұрын

Reasons why i love watching your videos is your well detailed explanation Keep it up Boss

@autopurlieu 7 ай бұрын

Thank you for your support 🙏

@bruno_mcd Жыл бұрын

You're a legend. Just had this exact same problem, and I don't want to spend close to 2000€. Will take care of it ASAP! 😊

@autopurlieu Жыл бұрын

Great. Let me know if you need assistance 👍🏽

@eziakahtarango1066 4 ай бұрын

@@autopurlieuhey would u b able to do a emulator programed with a key already ?

@autopurlieu 4 ай бұрын

@@eziakahtarango1066 hi, I need more info . Like what car year and model . Message me on FB “Auto Purlieu” so I can further assist you

@boogiemanshow8400 Жыл бұрын

Thanks. Man. That was real cool of you. Step=by=Step too, with good, clear footage.

@autopurlieu Жыл бұрын

Thankx for your support brother 🙏

@josephprosper853 Жыл бұрын

Oh my just what I needed..I will plan to come over for training at your place in the future. Great job.

@autopurlieu Жыл бұрын

Thank you for your support

@daveycrockett9447 6 ай бұрын

The worm gear motor is what goes bad. You can buy one for as cheap as $10. Replace the motor in the ESL module, you just removed and dont need to reprogram anything. Much easier.

@autopurlieu 6 ай бұрын

But with all the work you have done then the motor goes bad again. In some people , they pay labor rate for that. I program esl emulator , I have plenty of customers that went to replacing just the motor and keep going bad in less than 3-6 months . The emulator has very low chance to go bad

@JoseLuna-xt1rz 9 ай бұрын

Genius my friend. I admire you taking on this job and identifying the initial issue. How much would you think a job like this is reasonable?

@autopurlieu 9 ай бұрын

Dealer charge from $1600-$2000 depends on location

@farhadghanbari1845 7 ай бұрын

I have a 2008 Mercedes Benz C300, I tried to start the car and it said “take your key from ignition “ I went to a Mercedes dealership and they said they are going to charge me $800 to fix it. It is too much for me. I want to know is it okay if I only change the ignition switch? Will my car work perfectly then or I have to change steering wheel luck as well? I actually don’t need to luck the steering wheel, if I don’t change it will it be a problem? Thank you for your time and guidance!

@farhadghanbari1845 7 ай бұрын

I messaged you on Facebook messenger as well, will appreciate your help!

@stretch5832 4 ай бұрын

I watched these videos and shake my head. Most of them on here do it this way. But there is one I found and I did it his way so I know it works. The guy show you how to do this and he only removed the bottom bolts and loosen the top two bolts to allow the steering wheel to be lowerred just enough to work with your hands. Took me literally 15 minutes to remove everything and about the same time to install it back to original form. THE KEY IS YOUR Steering wheel HAS TO BE UNLOCKED

@autopurlieu 4 ай бұрын

You are right. However , there are lot of them (just like this video) that the steering lock is in locked position . So it’s easier to drop the whole steering column and do all the work 👍🏽

@davidsaunders7118 3 ай бұрын

Where’s that video bro

@autopurlieu 3 ай бұрын

@@davidsaunders7118 what video are you looking for? If you’re looking for removing the esl without dropping the whole steering wheel and steering column. Right here But your esl or steering wheel must be in Unlocked position kzfaq.info/get/bejne/jKx1fpaWtrupj2Q.htmlsi=YG4vMOItnj0KWpea

@arlethsadian3030 2 жыл бұрын

Newbie lng po tnx po sa pgshare ganda ng car

@anthonybantula1161 2 жыл бұрын

Nice content boss napaka helpful para sa maraming. manonood Godbless done 🙌

@mikevlad13 2 жыл бұрын

Great job man! I got this problem right now.👋

@autopurlieu 2 жыл бұрын

Thank you , I know you can get it done as well

@aashzlifeadventures 2 жыл бұрын

Same here Just got it few days ago. Sydney, Australia.

@autopurlieu 2 жыл бұрын

@@aashzlifeadventures best of luck . Its doable

@raymondarias8459 Жыл бұрын

You are the man bro👍, great video, thanks

@autopurlieu Жыл бұрын

Thank you

@mhargiecasica7493 2 жыл бұрын

Keep safe and thank you for sharing your blessing to us

@robellynnonsol5935 2 жыл бұрын

Ganda namn po ng car mo. 😍😍 keepsafe po.

@princeszovelleagustin9997 2 жыл бұрын

nice car and thanks for sharing this very helpful video sir

@taz8436 Жыл бұрын

brilliant video with superb detail weldone

@autopurlieu Жыл бұрын

Thank you

@terrenceclyde 2 жыл бұрын

Nice Video sir. Nice car also Love it. DONE

@Dashikardashian 2 жыл бұрын

Omg I finally found a video of what I needed!!! I will not be doing this myself , due to the fact I have a warranty, but I’m just happy I came across this video. I must ask, how does this problem even occur??? Like what causes this ?

@autopurlieu 2 жыл бұрын

It’s a common problem on its parts. I’m surprised it wasn’t a recall

@mkd3351 Жыл бұрын

It's the motor that retracts the pin from steering lock fails

@Dashikardashian Жыл бұрын

@@mkd3351 so it’s just randomly? Or is it caused by something?

@gersonlopez2094 10 ай бұрын

Mr legend Where do we get that part? Plz

@JOSEF7011 4 ай бұрын

It is caused by turning the steering wheel after removing the key. For example, when getting out of the car, you hold onto the steering wheel, the latch locks the steering wheel, but the tensioned steering wheel does not allow the latch to be unlocked. There's even a counter that counts the wrong unlocks, and after a few failed unlocks the steering wheel lock locks up and has to be fitted and a new one programmed. It is possible that you have inadvertently caused the fault yourself :-)

@sanyakelvin2106 5 ай бұрын

Wonderful, you so talented thanks bro for ur simple nd good direction bless you

@waynesworld6989 Жыл бұрын

Great job recording... verry verry informative

@autopurlieu Жыл бұрын

Thank you brother, and for your support 🙏

@kristineacebes9113 2 жыл бұрын

Great job sir , napaka galing talaga' DONE

@josueisrraelgozgomez9624 2 жыл бұрын

Este sí es un buen video gracias máster

@autopurlieu 2 жыл бұрын

Muchas gracias

@antoineduplessy6009 2 жыл бұрын

Nice video,by the way you worked very hard for a so called lazy 😇😂😂🔥🔥🔥 thank you

@autopurlieu 2 жыл бұрын

Thank you. I always try my best

@aashzlifeadventures 2 жыл бұрын

Thank you so much sir.

@70looney 2 жыл бұрын

had this on e250 esl went luckey it was off so it was easy to replace saves time if goes when not locked new one from main dealers and the green key to go with will need id and docments

@user-vk9yt6hc9n 2 ай бұрын

When it is replaced are the keys replaced as well or do you keep the same keys

@jolinag.officialteamohio2778 2 жыл бұрын

Wow Nice Car ,keep safe always 🥰

@gemmaquilongquilong1945 2 жыл бұрын

Blessed Happy Sunday Po Sir gosto Kong sumali First time ko na kita and Chanel ninyo I watching from San Antonio Nueva Ejicia Very Nice ang programs ninyo wala akong alam sa sasakyan Dahil na kikisakay lang ako may Community may car before I stay and convent 20 yrs I am Sr Gemma may Baptism name , Paulina Peter is may Religious Name I Happy for watching your chanel Thank God Bless

@gretchendelacruz3462 2 жыл бұрын

Thank you for sharing your video

@smailidrissi1833 2 ай бұрын

Please i need a help i have a problem with my mercedes w204 model 2009 the dashboard shows these problems default assisted direction Ebv ESP ABS can u tell me how to solve this? Must I change the ESP system? Any idea thank very much

@autopurlieu 2 ай бұрын

Does your car starts ?

@smailidrissi1833 2 ай бұрын

@@autopurlieu yes it starts normally when i accelerate more than 20km/h the signal of ebv esp abs indisponible then the steering wheel becomes rigid but the power of the vehicle remains normal

@autopurlieu 2 ай бұрын

@@smailidrissi1833 looks like you have a power steering or abs related problem. Find a good mechanic with a good scanner to diagnose your problem.

@smailidrissi1833 2 ай бұрын

@@autopurlieu thank you so much for uour reaction im really grateful

@rozelsanipa5535 2 жыл бұрын

Nice car! Wish to have one, wew! 🥰😍

@kennethtalbott2233 Жыл бұрын

now that's a fiddly job. well done.

@autopurlieu Жыл бұрын

Thank you sir 🙏

@evelynego-ugan3108 2 жыл бұрын

Watching, ADVANCE HAPPY NEW YEAR PO

@joceliaugbamin9526 2 жыл бұрын

Hello po sir good afternoon...wow nice car

@yedidiadahan8088 2 жыл бұрын

was the airbag light on before the repair? or did the module removal set the code?

@autopurlieu 2 жыл бұрын

It’s been on. The car has prior accident and whoever fixed the door panels , didn’t replaced the airbag door sensors.

@johnclinton9940 2 жыл бұрын

did the same exact repair yesterday on mine glk350. I noticed on your video and my car also, when taking corners, steering wheel won't center it self and I manually have to turn it back to center it. I noticed your car was doing the same thing. Any sugestions?

@autopurlieu 2 жыл бұрын

Did you mean with the power steering ? Power steering works. It was just the steering wheel was a bit off at first but I have to reinstall it and make it center

@eminecetinkaya2907 Жыл бұрын

Correct, power steering. I notice you had to turn the power steering manually or at least assist because it wasn’t returning back to center which supposed to. My car start having the very same issue after the repair.

@thejack9232 Жыл бұрын

Are you Great video, what type of camera set up? Do you have to get these great videos? When I’m working on my car, I like to make my own videos, but I have a hard time with the camera angle.

@autopurlieu Жыл бұрын

I just use iPhone

@keziamaesualog6915 2 жыл бұрын

Done Kezia sualog Very nice

@rafiekahmed8568 Жыл бұрын

Hi thanks for sharing really much appreciated I have a question is no there programming required for the emulator is it just plug and play

@autopurlieu Жыл бұрын

Hi, the emulator needs to be programmed to your car. I do that service if you need help. You can message me on Fb “Auto Purlieu” kzfaq.info/get/bejne/nK2FgbSorp3Tm5c.html

@sconey13 Жыл бұрын

Your Emulator Just Hangs It Doesnt Bolt Up To Where The Old ESL Was Placed? Also You Got The Air Bag Malfunction Light On Even With Removing The Ground From The Battery? Thanks

@autopurlieu Жыл бұрын

Yes, my small emulator just hang anywhere/ zip tie it or wherever you wanted to place it. For the reason , some esl doesn’t to come out if it’s in unlocked position . And it’s very concealable . With this particular car, srs light was on because it has a collision on right door. If the air bag malfunction light comes on after the installation, that can be cleared by a good scanner with ABS capability

@analizagalaurasvlog4261 2 жыл бұрын

Watcing po Enjoy vlogging po

@alanmos9224 Жыл бұрын

Thanks men,, you save me

@autopurlieu Жыл бұрын

I’m glad it helps

@rossyndosi8501 6 ай бұрын

Great Video i got the same problem with my GLK, can you tell me where do you ordered your ESL emulator with key already programmed ?

@autopurlieu 6 ай бұрын

Message me on FB “auto purlieu “ I program ESL Emulator specific to your car . kzfaq.info/get/bejne/pN-YZr2Wu86ZeJs.htmlsi=gGTSn4F6K0Vu50pW

@XxL3GITSWAqqxX 8 ай бұрын

I need help on a 2002 Mercedes’ Benz c32 amg had a guy that ordered a new ESL elv emulator and programmed it to the car. Steering wheel is not locked. Keys is new and is programmed with eis. Can you let me know what else will be wrong that won’t let my car turn on?

@autopurlieu 8 ай бұрын

Is it programmed properly? Did you ask the person who programmed your esl emulator and tell him what’s going on?

@JER1334 3 ай бұрын

I didn't see in the video where you removed the hood latch cable from the panel under the steering wheel and I'm having some trouble with that. Any idea if there is a video on that floating around?

@autopurlieu 3 ай бұрын

That has a screw

@autopurlieu 3 ай бұрын

@jer1334 22: 14 on this video kzfaq.info/get/bejne/jKx1fpaWtrupj2Q.htmlsi=t5TjlvMUxSASnqNA

@crypticpath 8 ай бұрын

The part is $400 for my GLK350. But the dealership would not sell me one with the programming key. It had to be tied to a service order, $2000 USD repair. But I am going to try another dealership, if they will not sell me one I will just go emulator route. My ESL is starting to lock up randomly. I can get it to unlock by banging on the steering wheel. If its unlocked I can remove it easy enough without taking the column out.

@autopurlieu 8 ай бұрын

Let me know if you want me to program you an ESL emulator. Yes, that’s the average price on that repair. Even they give you just the ESL part,,you will need to program it still. The esl must be same program and sync in with the Eis and the key fob . Downside of getting the OEM ESL, it will again . It’s about when it’s gonna happen again . Getting stranded sucks

@daveycrockett9447 6 ай бұрын

Not sure why you needed to mess with the ignition switch where you put your key in, could have left that intact.

@autopurlieu 6 ай бұрын

I just wanted to show how it done. So when it’s need to program the esl emulator on bench

@woodwheel750 2 жыл бұрын

i just paid 1650 to get this done on my 2014 cls550 smdh wish i would have found your channel first

@autopurlieu 2 жыл бұрын

Is that a dealer price ?

@woodwheel750 2 жыл бұрын

No sir dealer was higher

@autopurlieu 2 жыл бұрын

@@woodwheel750 that’s a great price compare to dealer.

@lgcarkeyNJ 2 ай бұрын

Excellent video, thank you for the very detailed explanation, my question is how much do you charge for all this work?

@autopurlieu 2 ай бұрын

Each car is different. Find and message me on FB “Auto Purlieu “

@cravingsunleashed4880 2 жыл бұрын

excellent video my friend, thank you for taking the time and showing the details. Now the question: where did you get the bypass esl i have a job to do on a 2008 C300 having the same issue, i can get the car to start after moving the steering wheel up and down making it knock on the column, and then it works..... i want to take the esl out and put a bypass plug and play just like yours, I've seen some emulators that need to be program, to do this you plugged in the bypass and a new key right, no need to program anything ?? I'm kind of lost , thank you for the response ahead of time

@autopurlieu 2 жыл бұрын

I just ordered it from a friend of a friend. I don’t have a programmer that capable of doing Benz cars I just installed this and did all the mechanical installation part. I believe you have the same problem. Just eliminate it and you won’t have that problem again

@cravingsunleashed4880 2 жыл бұрын

@@autopurlieu so just instal an emulator without programming it ? I thought they need to be programmed

@autopurlieu 2 жыл бұрын

@@cravingsunleashed4880 it needs to be programmed. I was just saying that someone else programmed it to me .

@intherealworld1188 2 жыл бұрын

The early chassis use the plug & play type emulators. The 204, 207 and the 212 chassis use this type and it has to be programmed. This can be done by a qualified person with the proper equipment on the car or the EIS (ignition swtich) and the key can be sent out to get the emulator programmed. The specific one he is installing can be purchased though the mail for around $120 incuding the emulator, shipping and programming.

@m4ravish 2 жыл бұрын

@@intherealworld1188 where ay excuse me??? I need one for my mercedez

@bobc7733 8 ай бұрын

Great video.I am having the exact same problem,I've got as far as removing the airbag but cannot loosen the steering wheel nut.Please can you say what sort of impact driver you used ? Make and model or at least it's power capabilities would be great , Thanks.

@autopurlieu 8 ай бұрын

Actually, a long breaker bar works. Steering wheel must not be moving when you do it. Even a good impact gun won’t budge if the steering wheel is not stationary

@erwincabrera1741 8 ай бұрын

Good job I have the same problem were can I get esl inmulador

@autopurlieu 8 ай бұрын

@@erwincabrera1741 check my other videos. I can provide esl emulator and program them to your car . You can message me at FB “auto purlieu”

@emanueldringa2337 6 ай бұрын

Great job, ❤I'm facing this problem today.😢.. is there any coding to be done with the computer after attaching the emulator?

@autopurlieu 6 ай бұрын

@@emanueldringa2337 Yes , the esl emulator must be programmed specifically to your car. I do offer that service , includes the emulator . The esl emulator must be programmed before installing to the car Message me on FB “auto purlieu” to further assist you ., with your car year and model

@stevomicic2093 2 жыл бұрын

Did you have to program a new key and right with that emulator and how did you do it? Does it cost a lot?

@stevomicic2093 2 жыл бұрын

And lock*

@autopurlieu 2 жыл бұрын

I just ordered it from a friend of a friend. I don’t have a programmer that capable of doing Benz cars (at that time) I just installed this and did all the mechanical installation part. Same old key and eis needed to program the emulator

@daltonspecial8336 Жыл бұрын

Awesome video !!!! Can you use the old key and ignition box after adding the emulator. Or do you need a new key and ignition along with the emulator to get programmed together. Can you tell me the cost of programming all or whatever is needed. And if I have to buy a new key and ignition box. Thank you so much.

@autopurlieu Жыл бұрын

Message me on Facebook at “auto Purlieu “

@thesssebastian9062 2 жыл бұрын

Done. Keep safe always..

@richardjt5780 5 ай бұрын

I have this exact problem, do you think its better to replace the broken esl with another esl motor or emulator? People said emulator is better since new esl may break again but what about security?

@autopurlieu 5 ай бұрын

I might be bias because I make and program an esl emulator to every customer I’ve had contacted me about this problem. For the past years none of them came back nor went bad. We already know that the OEM ESL goes bad, so putting the same OEM ESL will go bad and it’s the matter of “when” it will go bad again. And the price of OEM is close to $2k or more I’ve seen some emulators that fail but those are the older emulators , that has wires dangling. My ESL emulator is well proven and tested. Come message me , find me on FB “Auto Purlieu” . I can help you with your problem

@autopurlieu 5 ай бұрын

kzfaq.info510eteory5U?si=JQQSFHplTrhbcN9H

@autopurlieu 5 ай бұрын

kzfaq.infoac_dQvk3Cvc?si=AaUuoXi1Y8k5myMj

@richardjt5780 5 ай бұрын

@@autopurlieu I saw that if your battery went flat and have to replace it with new one, the key not working thing will happen again even with emulator? How true is that in your experience. Saw it on FB post at w204 forum.

@autopurlieu 5 ай бұрын

@@richardjt5780 that means you have other problem than the esl. Battery don’t go flat normally, either your alternator is bad or battery or combination of both. And that’s depends in what kind of emulator are you using. Some emulator has personalization feature and that will happen to it. And the one I used is more simpler kind . It’s all depends on how it’s programmed and what type of emulator is used .

@Dnasty1 2 жыл бұрын

Great video. I think the previous owner of my car has installed this emulator (because my steering wheel never locked) and it has just now gone out on me. Can I just purchase another emulator and swap it with the one under the dash? Or do I need to take everything apart like you did?

@autopurlieu 2 жыл бұрын

Thank you. If it’s just dangling underneath , you can just unplug and replace another one. But still, that emulator still need to be programmed to the car eis

@Dnasty1 2 жыл бұрын

@@autopurlieu how do they program it do they need access to my car?

@autopurlieu 2 жыл бұрын

@@Dnasty1 it needs a special programmer for that. Emulator + eis + key , needs to sync in together . Technically those 3 is all needed so the locksmith can program it. Each programmer is different, depends on a locksmith and their skill if they need the whole car or not.

@johnsondml 2 жыл бұрын

I thought it's just plug and play

@autopurlieu 2 жыл бұрын

@@johnsondml for this specific car, it must be programmed. Some other models are plug and play. And in this situation, the steering lock is in lock position. So that must be removed first too

@guillermomadrigal4683 Жыл бұрын

What if the wheel is not locked how much of this do you have to do. On a 2012 gl450. Can you unplug it with out taking DAZN apart and steering wheel off.

@autopurlieu Жыл бұрын

If the electronic steering lock (esl) is in unlocked position . If you can reach it and unplug it then install the programmed esl emulator .

@guillermomadrigal4683 Жыл бұрын

@@autopurlieu so you have to program the Esl?

@guillermomadrigal4683 Жыл бұрын

@@autopurlieu do you know if I’m a 2012 gl450 you can reach it to unplug?

@autopurlieu Жыл бұрын

@@guillermomadrigal4683 yes, must be program to your car specifically.

@guillermomadrigal4683 Жыл бұрын

@@autopurlieu hmm the one I bought said no coding. Plug and play, but idk…. How do you program?

@tredeep333 Жыл бұрын

What are the tools you used for this vid

@jettakubra 2 жыл бұрын

Good morning sir! I came across this video as my car just did this yesterday. Where can I get the emulator? And if ever how do I get it programmed as Im up here in Toronto. Thanks!

@autopurlieu 2 жыл бұрын

What year and model of Benz are you working on ?

@jettakubra 2 жыл бұрын

@@autopurlieu Its a 2011 C300 4matic

@autopurlieu 2 жыл бұрын

@@jettakubra you have to find a good locksmith that can program that emulator to the IES. Pare, Find me on FB “Auto Purlieu” Tulungan kita

@user-qq7xj5nq3p 2 ай бұрын

Better best from you man

@maloubailloestrera1891 2 жыл бұрын

Wow nice.....

@ADDMEONPSN 3 ай бұрын

Question will a 06 Cls500 need key programmed with this?

@autopurlieu 3 ай бұрын

You mean esl emulator programming. Almost same situation just a bit different process .

@Blogs1. 2 жыл бұрын

i find it interesting because my EIS went out and its a 800 pallor part from benz for my 2009 c350 sport

@autopurlieu 2 жыл бұрын

And it could happen again . That’s why emulator is the way to do it 👍🏽

@alanmos9224 Жыл бұрын

Thanks!

@macqueschannel5616 2 жыл бұрын

My dream car!

@noodle9851 2 ай бұрын

What size are those 4 bolts for the steering column

@angeloalbidastiniovlog5833 2 жыл бұрын

Wow nice

@selenabest6399 Ай бұрын

I am having this issue but my key fob keeps getting stuck and hard as too come out but now that I finally got it out it won’t go back in and the brake abs esc inoperative comes on & then steering wheel lock malfunction inoperative comes on but I drove too the store turn car off too get out then the key got stuck and then the car turned off & then wouldn’t turn on at all I’m thinking the steering lock & ignition switch went bad how can I fix that

@davidsaunders7118 3 ай бұрын

I’m so confused. I swapped batteries and nothing. I have power to all the lights, power windows/chairs but I get that same message. My car was literally working fine, left the door open and I’m guessing I killed the battery. New battery hasn’t started it either, all the fuses and relays are good I checked the OBD scanner, I get p0607 control module performance. I’m confused because I didn’t have that code before

@autopurlieu 3 ай бұрын

That’s where all started . Out of random, this electronic steering lock goes bad out of nowhere.

@farhadghanbari1845 7 ай бұрын

Hi, I have 2008 mercedes benz c300 and i have this problem too,i want to know If I change just ignition switch my car starts up, because it costs me too much to replace both.thank you 🙏🏻

@autopurlieu 7 ай бұрын

If you think it’s your esl is defect, replacing the ignition switch will not fix it. You ah e to replace the ESL or bypass it with ESL emulator . It’s like having an alternator problem then replacing the battery will not fix it . Either way, replacing the ignition switch will need programming aswell. Are you in the US? I can make and program you an ESL emulator specific to your car. Message me on FB “Auto Purlieu” You have to do the work of removing the parts and installing it . Or find a mechanic to do the install and removal.

@frankmensah53 6 ай бұрын

Good job

@xaviermedia8988 Жыл бұрын

Hi bro You are very very God, can you please tell me were and what's the cheapest simulator for my 1999 430 clk and how would I get everything programed vro I'm broke down in a small town and definitely need your help 😣

@user-qq7xj5nq3p 2 ай бұрын

Good job bro

@autopurlieu 2 ай бұрын

Thanks brother

@agoodneighborautorepair2176 Жыл бұрын

Very nice explanation and information, blessings, do you have the parts number or kit information, and the tool to remove the switch?.,thanks again

@autopurlieu Жыл бұрын

Hi, thank you. When you say “ to remove the switch” you mean the electronic ignition switch (eis)?

@autopurlieu Жыл бұрын

You can go to Amazon and type “eis Mercedes’ removal tool” They have plenty of them. 👍🏽

@agoodneighborautorepair2176 Жыл бұрын

@@autopurlieu yes,the blue tool to remove the big nut, and the parts or the link the you remplace to cancel the steering column lock model, please

@agoodneighborautorepair2176 Жыл бұрын

@@autopurlieu thanks

@autopurlieu Жыл бұрын

@@agoodneighborautorepair2176 the emulator was made and programmed and orders by a friend of a friend. That was when I was working on this car awhile back. Now I can make and program the emulator now. I will need the eis and the working key to get it done. Message me on FB if you like order 1

@adrianmendieta1110 Жыл бұрын

Si it possible yo change the esl and/ora evl with a RFID system?

@autopurlieu Жыл бұрын

Hi, sorry but I don’t understand when you said RFID system?

@abdelhalimbahi5541 Жыл бұрын

Merci mohandis

@OscarHernandez-rj1dl Жыл бұрын

So what did you do? Program it first and then put it in there?

@autopurlieu Жыл бұрын

Yes, just program it or else it will not start

@vanessajotojot2940 2 жыл бұрын

Done po👍

@ailenealcaraz6640 2 жыл бұрын

Nice car ❤️❤️❤️

@emanueldringa2337 6 ай бұрын

Great job, ❤I'm facing this problem today😢... is there any coding to be done with the computer after attaching the emulator?

@autopurlieu 6 ай бұрын

Yes , the esl emulator must be programmed specifically to your car. I do offer that service , includes the emulator . Message me on FB “auto purlieu” to further assist you ., with your car year and model

@rocfamilyvlogs8060 2 жыл бұрын

Sana all my magandang car

@simsauto 6 ай бұрын

Hy can you please tell me if the key fob is stuck in the ignition switch i need to change this parts like you or is just the ignition switch fault.thank you . Nice video😊

@autopurlieu 6 ай бұрын

If the key fob is stuck into the ignition switch. You might have a defective ignition switch too. It shouldn’t be stuck

@simsauto 6 ай бұрын

Oh nice and thank you for replay

@sendavid1981 10 ай бұрын

Hi buddy...i have a qestion...the emulator must be programmed? Is the key you used new or is it the same one you've had? greetings

@autopurlieu 10 ай бұрын

Yes. I can make the emulator and program it myself. I used the same original key. It only has 1 key fob

@sendavid1981 10 ай бұрын

@@autopurlieu Another question, here in Chile it is difficult to get car mechanics these days, I can install the emulator and ask another car mechanic to program it???? Or could I do it myself or do I have to have some special electronic machine to do it? I need your guidance, thank you very much, excellent youtube chanel

@autopurlieu 10 ай бұрын

@@sendavid1981 you need a programmer to program it. It’s better to find someone who’s capable of doing it

@angie27vlogteamohioadmin 2 жыл бұрын

Wow nice car 🚗

@emanuelearena4087 Жыл бұрын

very good

@carminadeguzman1877 2 жыл бұрын

nice

@richardnazar1214 2 жыл бұрын

DONE ❤️

@alkhashtee Жыл бұрын

It will be easier for you if you drop the whole steering column assy and let it sit on the seat/your lap

@autopurlieu Жыл бұрын

I had to dropped the whole thing for this kzfaq.info/get/bejne/lauRi8Wa0dSwqX0.html

@lewisdavis8640 Жыл бұрын

Hey when I buy a new esl emulator , can I use my old key from my car to program it ? (When I ask the mechanic to)

@autopurlieu Жыл бұрын

Whoever will do the programming to the emulator (most likely a locksmith) . Let them order the emulator , and they will do the rest . It’s more work if you get the wrong one then you will be back and forth with the locksmith . To program an emulator , it needs your current working key fob and the electronic ignition switch (eis) to get it done right . What year and model is your Benz?

@lewisdavis8640 Жыл бұрын

Update:eBay has one for the w204 I sent the guy my key and esl abd hes programming it from Texas and shipping it back that’s how I got my emulator guys !

@autopurlieu Жыл бұрын

@@lewisdavis8640 yes , I saw that one. That’s great . I have 1 subscriber here done that way. But didn’t get to programmed right and now they are back and forth sending and mailing the eis. Find a local locksmith, it should be that same process and not a a lot of price difference . And it’s local , easy access

@mexicancrew8611 2 жыл бұрын

Hello sir, I have a question Do we need to program the key even we put on the emulator?

@autopurlieu 2 жыл бұрын

Yes, emulator need to be program with the key and the EIS “ignition switch “

@mexicancrew8611 2 жыл бұрын

@@autopurlieu Thank you! All this is quite a bummer even more when I don’t understand it:/ So in case I want to replace everything it should be just the Esl, Elv and the key right?

@autopurlieu 2 жыл бұрын

@@mexicancrew8611 depends on what problem do you have . I did not replace my EIS and key. I kept them and get it programmed to the emulator

@intherealworld1188 2 жыл бұрын

@@mexicancrew8611 If you do this by a mail in service you can send the old lock, the EIS (ignition switch) and the key. They will be able to tell you what the problem is. These models are not common for EIS failures.

@mara9958 2 жыл бұрын

I have to check this out

@charlottebradecina9217 2 жыл бұрын

Done subscribe.

@milmayanquillano3446 2 жыл бұрын

Nice car

@HOTROD256969 Жыл бұрын

Hi how are you. I don’t know if I have the same issue but a few weeks ago I went to Walmart and when I came back out my steering wheel was stuck. I put my keys in the ignition and it says take eyes out. My lock and unlock button work on my key fab. I change the battery because I had Warranty but it was not the battery. I can not move the steering wheel. Before that happens I was getting a steering wheel malfunction message on the dah for about a few months. I have a 2010 c300

@autopurlieu Жыл бұрын

If you don’t hear your steering lock unlocking when you insert the key in the ignition switch. Yes, you have the same exact problem. I can program you an emulator if you send me the EIS “ignition switch “ and your working key fob

@HOTROD256969 Жыл бұрын

@@autopurlieu I hear a ticking sound when I put my key in a tick tick

@autopurlieu Жыл бұрын

@@HOTROD256969 you hear the ticking sound but the steering wheel is locked? Can you move the steering wheel freely once the key is inserted ( it will be hard turn but still freely)

@HOTROD256969 Жыл бұрын

@@autopurlieuno

@HOTROD256969 Жыл бұрын

@@autopurlieuwhere are you located

@jorgemartinez566 7 ай бұрын

I did the same to my car and also had the airbag alert , how did you get rid of of it?

@autopurlieu 7 ай бұрын

An obd scanner that has srs airbag reset

@JR-kb8ny Жыл бұрын

Do i have to reprogram the esl or is it plug n play?

@autopurlieu Жыл бұрын

You can order an emulator from me. I can program it specifically for you car . I will need your EIS (ignition switch) and working key fob shipped to me, so I can do the esl emulator programming . When you receive back your key fob/ EIS / and the programmed ESL emulator . They all will be plug and play. Find me on FB “Auto Purlieu” , message me and I’ll be grad to help

@pattypino446 2 жыл бұрын

Done Patty Loyola

@2MasterBuilder2 Жыл бұрын

Wassup brotha. Mine failed in the UN-locked position. Will I need to remove the entire steering column to remove the old unit? Thanks for the video my brotha

@autopurlieu Жыл бұрын

If it’s unlocked. You don’t have to. But go ahead disconnect the wire that goes to the ESL “steering lock” so there’s no chances it go back to lock position

@2MasterBuilder2 Жыл бұрын

Awesome. Thank you