Thank you for this. I didn't even think about going from two drains to one so you saved me a much worse headache.

pro tip: install the faucet into the sink before installing the sink. much easier.

Just finished installing mine. Same sink from Costco too. I got the same kit to do the install and it made my life so much easier. Only difference is my dishwasher is attached to the garbage disposal, 1 extra easy step. Also, I’ve never done any plumbing work before in my life so it was a good learning moment

Nice sink but glad I purchased one the the garbage disposal on the right back corner rather than the middle That location is better in the fact that putting pots in the sink won't back the garbage disposal opening.

Just a side comment but you can buy inexpensive peel and stick floor tile and place on the cabinet floor, seal it with silicon. This way if the sink plumbing ever leaks, it will not ruin the cabinet. Just an idea for anyone for underneath sink protection. Great video gents.

Super helpful tutorial. I put in the same sink the other day and this made the process easier on me. Pretty quick install.

Some feedback for anyone doing this themselves. I had an old tile countertop that presented a unique set of challenges. The original sink was an over mount but tile was installed over the top edges of the sink. Had to cut the tile from the top to access the sink and remove it. To do this i had to purchase an angle grinder and diamond blade. This will kick up tons of dust so prepare ahead of time. The sink clips the Kohler sink came with werent long enough...so i bought longer ones at home Depot. Those still weren't long enough. After some research you don't "need" them if your installing over the top. . This might be up for debate but with my setup it just wasn't happening. My sink didn't come with the garbage disposal drainage ...it came with a strainer. You can use your old one ...but who wants an old crusty one in their new shiny sink? So i bought one for twenty bucks. Put tape over the edges of the sink to prevent excess silicone from getting on there once you seal it. Also make sure all your pipes are in place and install as much as you can before sealing it. Last thing you want is to move the sink around after you secured it in place.

Thanks so much me and my dad put his in together and this made it so easy!

You currently have a "S trap". I would add an "AAV" on a "T" to make a "P trap" for proper ventilation and water flow. If you are in the untied states "S traps" are illegal and not to code. There are videos on KZfaq that shows you how to go from a "S trap" to a "P trap"

Thanks for the video! It was a big help.

Nice sink kit... (things I say that make me realize I'm officially an adult...) Also, it's nice to see the same OSHA-approved footwear that we use on our jobsites! 😆

This was super helpful!

Very helpful video!

Good job fellas!!

You can put the clamps in after you drop it.

I got the same sink, mine has two separate drains coming out of the wall? What do I do with the extra drain? Excellent video btw!! Very helpful

Super helpful. How did you deal with the air gap from the dishwasher?

Thank you bro super helpful tutorial. I learned a lot but why does the P-trap drain look weird and didn’t the sink come with a basket strainer what happened to that?

The box saids top mount/undermount sink. Can it be installed as an undermount sink or does it half to be undermount?

That nut bracket thing with the two screws on each side, what is that called, and did it come with the kit?

What did you put on that wood countertop to give it that bright?

Good job , however that P trap is no p trap its an S trap. An S trap can suck the water down out of the trap leaving you with sewer gas.

The one I'm install right now for my friends mom didn't even come with those clamps 🙃

Why did you decide to use silicone underneath the edge of the sink instead of plumbers putty ?

What about the other drain?

Where did you get those nuts/bracket to hold the faucet from under neath

What are the dimensions you need to cut to fit the sink? I’m trying to figure out if my counter will fit it

There no air gap illegal and has s trap illegal.

was the disposal hard to get mounted up?

Did the faucet have any flex once you installed it? I see someone reinforced it with a piece of plywood underneath since the metal is thin

No soap dispenser, oh no I just bought one, watching video to install

I don't think i have the room for the sink. I don't have 36" width.

no one talks about measuring to make sure you order the correct size sink- i have granite so i can change the opening

Hi Can this sink also be undermounted??

Hello everyone, I am a manufacturer of kitchen sinks. Our factory is in Guangdong, China. If you need a sink, please contact me.

You created an S trap using to P traps, not good!