Thanks to Ian from Gravenhurst Home Hardware I was able to borrow this new Stihl MS 241C Chainsaw for a video review. You can thank him here; / 179787715389501 See full specs here; en.stihl.ca/STIHL-Products/Cha...
Пікірлер: 250
@PhatFarmer Жыл бұрын
I have had a ms241c now for about 4 years, it's a work horse. Just changed over from an 18" bar to a 14" one, It rips through everything. Super happy with it. Nice Review and break down
@rudolfyakich66536 жыл бұрын
I just bought a MS 461 R and will try it soon. I think I will be glad I didn't get the 661 to replace the 064 that was stolen from me. It has been a long time since I was a tree faller. I am now a senior citizen firewood cutter. Thanks for your videos. I was unable to make my friend's Poulan 4016 run properly by making carb adjustment.
@jeremyhewitt26378 жыл бұрын
One of the best chainsaw reviewers I have seen
@deftrude11 ай бұрын
❤
@mbrusso015 жыл бұрын
That's a great review with all the main points covered in an interesting way.
@hanameizan4 жыл бұрын
Very useful review, thanks. Here in Japan the ms241c sells for the equivalent of C$ 1400. At that price I might fly to Canada, have a holiday, and come back with one!
@h9rae9 жыл бұрын
Just bought one of these chainsaws This brilliant review is just what i wanted thank you
@johnclarke66476 жыл бұрын
Don, I got a ms241cm last year and it has been a pleasure until Sunday. I had cut off a bunch of stumps off a ground level, which meant I had to clean it, fully, after use. After cleaning and resharpening, I gave it my customary crank. It would not start, period. The first thing I checked was "for spark" and it had what appeared to be spark it not the normal "rat, a tap, tap" sound we normally hear. Regardless, I accepted it as spark. Then I started looking at any fuel related problems and found none. So, I put it in the shop on the shelf and deferred the resolution until the next day. I worked on it for several days but it still would not start. I was about to take it in to a Stihl dealer, since it was still under warranty when I decided to take a look at spark one more time. I pulled the boot off the plug and the coil wire an connector came right out of the boot. Then I knew why the spark looked more like St. EMMA'S fire than a clean blue spark.. I squeezed the barb connector back into the coil wire, put a plastic tie around it and connected it to the plug. Bingo, it cranked with one pull. I have since got it back into the boot and reconnected, correctly, but I put another plastic tie in the grove at the end of the boot, so it cannot, easily get out of the boot, again. I will now start with one pull, every time. John
@farmer72293 жыл бұрын
just bought one of these very happy with it your review really helped with my purchase decision thanks
@80sDweeb10 жыл бұрын
Always love your videos, Don, thanks. Because of you I'm going to be buying a lawn tractor that doesn't run right, fix it, and save a bundle!
@donyboy7310 жыл бұрын
thanks, happy fixing!
@kopfmann455 жыл бұрын
Man, this is a great review! Thanks
@ed5090754 жыл бұрын
Nice review. Bought the 241 about a year ago as I was finding my ms362 a bit heavy for working for prolonged periods. Getting old lol . Love the 241. Plenty of power and light. No issues with it yet
@ghostmartin93016 жыл бұрын
Thank you for the advice and review,man !
@2cyclemix9 жыл бұрын
Love those new screws on the cover. And the nut on the clutch cover is a good idea, too.
@timjanssen16718 жыл бұрын
Great review, tired of my old Poulan's, and always giving me trouble, I'm looking at the 250, or 251. Thanks for the great video !
@tonym692010 жыл бұрын
Great video Dony. That is one nice piece of equipment. Looks like it would be easy to maintain, Stihl though of just about everything. Great weekend Dony!
@johnclarke66476 жыл бұрын
Took delivery of my ms 241 cm, today. It is everything you said of it and more. The only thing I did not like was that 3/8P chain it came with. At least, it not come with that .043 chain they put on the smaller saws. Mine did come with a canvas tool pouch and a T27 wrench. I did not find any loose screws after two tanks but I will check them again in my normal PM checks. I was also surprised that it was not really filthy after I got through using it, today. Mine, started with one pull when I started it on the second tank. It is now on its 3rd tank.
@daviecr8on110 жыл бұрын
I've been using the MS261 for just over two years now. Great saw, just a little bigger than the 241, it's 50cc. Other than that they're almost the exact same saw. I highly recommend them.
@em47033 жыл бұрын
Yea I recommend the 261 also, the extra torque is welcomed compared to this, and with about 1lb difference but 33% more power, it's an obvious choice for a do-it-all farm saw. Light and powerful. If you want lighter, a cordless electric combo with 261 is just perfect!
@MrGundogtrainer9 жыл бұрын
Thanks Donny I am trying to decide on a 241vs a261. Around the camp for fire wood but also on the quad for clearing trails
@jamesosekowsky83034 жыл бұрын
Got the 026, same as 261, for trail clearing I'd get the 241, unless.... a really big tree is laying across it.
@gasman101910 жыл бұрын
Just want to say your videos always informative
@donyboy7310 жыл бұрын
thank you Gas Man 101!
@ice2578110 жыл бұрын
I got the Stihl MS261C for 814.00 Euros in Greece while the MS241C s price was 695.00 Euros. Both with 40cm / 16" bar
@cubbeezx10 жыл бұрын
Nice saw and great review Donny!
@donyboy7310 жыл бұрын
thanks
@googleplusisdead10 жыл бұрын
Nice, low key review, thanks!
@jerrythecoo329510 жыл бұрын
Great Review Dony........ I've had good luck with Huscavarna, I bought a H-50 in 86. Been a great saw. :)
@donyboy7310 жыл бұрын
that model was very popular in Canada
@dschamber71902 жыл бұрын
I wish Stihl would bring these saws back to Canada.... I'd buy one in heartbeat....
@gnarlychainsawcompany38934 жыл бұрын
Nice saw! Great review
@DijonInjection9 жыл бұрын
Norwegian price for MS 241C-M is between 6075 -> 7190,- Nkr. As of 26 june 2015, that is equivalent to 775 -> 918,- US$ or 692 -> 819,- Euros. Not sure if there is a significant difference between the C and the C-M model though.
@wtbm12310 жыл бұрын
I like the cover bolts and air cleaner.
@lawnboyfreak10 жыл бұрын
Great review Dony! Very nice to have someone loan you a new saw to review. If it's ever possible to review any outdoor power equipment of any kind, I'll watch it. It's nice to know what new technology is out there in case something comes into your shop, that you might not be too familiar with.
@donyboy7310 жыл бұрын
more reviews to come!
@johnlawler34349 жыл бұрын
john. from Ireland. I have over one hundred saws. all stihl and a few husky. yes the 261 is a good saw.
@johnlawler34349 жыл бұрын
the price of a 261c. is about 750 eurs
@donyboy739 жыл бұрын
John Lawler wow you must have a nice collection
@Bugg20510 жыл бұрын
Donyboy have you seen a 3 sided float needle? Does it matter what side faces float? The flat part of needle or the triangle part. Thanks.
@dalzamora22210 жыл бұрын
What kind of maintenance and normal parts replacements can I expect from this saw?
@Max_Marz10 жыл бұрын
Looks like the perfect all around saw for someone with a bit of property that needs to round up some fallen trees. Would really like to own one.
@Beerpiglet10 жыл бұрын
Thanks for another great video, I think technology just got away on me with that M-Tronic system
@DerTechniker10 жыл бұрын
is it possible to adjust the idle speed on thoose m-tronic carbs ? maybe with a little screw on the carb ?
@my05redx10 жыл бұрын
RRP is $1169 in Australia that's a big difference!
@andrew07kelly10 жыл бұрын
What should the compression be on a honda gx110. When I tested it with three compression tools I got a little under 50
@dagwood6410 жыл бұрын
I have one Stihl MS241C Chainsaw left for $379.95 with 16" bar or 379.95 with 18" bar here in Maine. Comes with a nice durable case, file, wrench, sm can 2 cycle oil and a pair of work gloves. My business went on the market this past Monday, been doing it 32 years and I just had the last of my discs in my back removed and fused with bone from my hip and the standing is getting to me.
@dagwood6410 жыл бұрын
$399.95 for 18"bar
@donyboy7310 жыл бұрын
Tinker Jim that's a good price! sorry about your back problems
@HenryKrinkleAK10 жыл бұрын
You have 241's left?
@OnTarget1008 жыл бұрын
Hi all, as always Australia will pay a premium price for the same product AUD$1,359.00 as of Dec 2015. But when converted it should be with current exchange rates $763.17 so the additional $595.83 is for the love of it. End of vent.
@donyboy738 жыл бұрын
+OnTarget100 wow expensive, you could almost buy one from Canada and get it shipped
@Fly4aWhiteGuy8 жыл бұрын
+donyboy73 Round trip airfare US to AUS is about $600 right now.
@davemartin97743 жыл бұрын
Gotta love socialism huh!
@Patrick495910 жыл бұрын
the smart stihl chainsaw never seen anything like it Dony mate i don.t think we would have anything like that over here in Australia as far as i am aware and it looks great for its make and build too love it :)
@rickthibault77859 жыл бұрын
Also Donny do you find the topper chainsaws harder to use or more dangerous for less experienced people?
@PeterAgostiniJdcap2610 жыл бұрын
Good review TU.. Something new the decompression valve , have not seen them on .. but have not looked the newer line in awhile . cheers
@icandoit2010 жыл бұрын
looks like a great saw
@mrkozel6 жыл бұрын
Great review- the price for the USA= $529 (16 inch bar) in Nov 2017
@TheRCcarDUDE10 жыл бұрын
Should I run my fuel mix a little richer with brand new 2 cycle equipment?
@fixalot41328 жыл бұрын
had a few bad experiences with stihl chainsaws that were day old ran on premix from stihl and wouldn't fix them so I haven't bought another one I picked up a 576 autotune! been only 1 month by so far so good! but I have a old 017 stihl and it runs mint and I have poulans and macs and a David Bradley and homlite super 12! no brand snob here its all about quality!
@constructiontech197010 жыл бұрын
Sweet saw Donny!!
@donyboy7310 жыл бұрын
thanks, not mine though
@drafted7210 жыл бұрын
You didn't mention the fuel grade for this saw. I have seen many people use 87 octane instead of 89 in other Stihl saws, which affects the performance and may harm the saw. Additionally, when getting gas at a gas station you should insure that all of the grade 87, which most cars use, is out of the gas pump hose before placing grade 89 into your container. Nice video.
@kasche8310 жыл бұрын
Very nice saw. Great review. In Croatia the saw cost about 1150CAD. Much more expensive as you can see.
@donyboy7310 жыл бұрын
wow expensive, may have to start shipping saws to you
@kasche8310 жыл бұрын
donyboy73 Yes, definitely that would be a nice trade:D. The prices ar almost the same in whole Europe. Only, I think that 241s are made in Germany here. Entry level saws are made in US and China.
@Thedanishfarmernet10 жыл бұрын
I have bought a stihl 046 saw to supplement my stihl 251 The piston is like new, but do not know The background and all funtions so could be fun if you could find one and go through it. with best regards
@nigelmchugh554110 жыл бұрын
700 Euro here in Ireland. That works out at 1070 Canadian!
@stevok496 жыл бұрын
Nice saw bought one today in Dublin Ireland and the price was 659 euro.
@VstoOnion10 жыл бұрын
893 CAD in Finland on sale. List price is 1266 CAD
@redneckeliot0327 жыл бұрын
Nice chainsaw donyboy73 but the saw being at 43cc stihl didn't have to add the decompression valve.
@jamesosekowsky83034 жыл бұрын
Really like the idea of a lighter yet pro saw as I and my back get older.
@scottkelly11822 жыл бұрын
Excellent
@BenjaminGoose7 жыл бұрын
Looks like a great saw. Carries a €700 price tag here, so you'd expect it to be pretty good for that price.
@mikehelms53349 жыл бұрын
Dony, Great video !!! Do you have any trouble shooting hints for this electronic carb?
@davemartin97743 жыл бұрын
Yeah you need the mothership at the stihl dealer to do that...
@jessecantrell73177 жыл бұрын
can you do a review of the ms311 chainsaw? fs560c-m brush cutter?
@TimKollat9 жыл бұрын
So which one: This Stihl 241cm or the Dolmar 421?
@samuelwatkins51457 жыл бұрын
Nice saw. I must say I like everything about my Dolmar PS-421 better EXCEPT that damn air filter. Stihl really has their act together with regards to that. The M-tronic is amazing also, but I don't mind tuning my carbs the old fashion way. Dolmar was $330 shipped.
@jamespeterson22853 жыл бұрын
Can you do a review comparing the farm boss MS 271 to the MS 262c
@G19Jeeper8 жыл бұрын
Id like to see a review of a MS361 with a 24"/25" bar, if you haven't reviewed one already.
@Super71deuce8 жыл бұрын
Great review. Just curious, is that white pull cord mesh cover on the side plastic or aluminum? Thanks, Murray
@donyboy738 жыл бұрын
+WM Harris I believe it's plastic
@Super71deuce8 жыл бұрын
Sounds good. I was wondering if they had changed from aluminum to plastic in the two years since this model came out. You always have concise and practical reviews. A great trusted source. Thank You.
@jasonrudolph796810 жыл бұрын
I have a lawn mower issue. My mower starts good and runs good for a short time then the plug seams to foul. If I clean plug it runs good again. Oil level is good. It's a Briggs engine. Any tips?
@davemartin97743 жыл бұрын
Sounds like it may be burning oil or the main jet may be too fat. how many hours are on it? Does it smoke a lot when first started. If yes than id check the valve seals. If it smokes while running after its warmed up id look at the piston(s), rings, cylinder(s).
@MC-ft8zv9 жыл бұрын
Hi, these are $1295.00 here in New Zealand new, at today's rates that is $1124 Canadian.
@donyboy739 жыл бұрын
Mal C wow that's expensive
@aussief50168 жыл бұрын
+donyboy73 Theyre $1359 in Australia, which is $1289 CAD today. we get royally overcharged this side of the pond.a Stihl ms 251 is $1049AUD for comparison you can buy a Makita 7301(dolmar) for $1179AUD, Makita 6100 for $979 and I just bought a makita 500 (dolmar ps 510) for $639 AUD, which whilst not a full pro saw is still a better option than the 251 (we havent got the 5100 here)
@noonsenytvaankumma3 жыл бұрын
Have 241c-m, after 2 1/2 year after purchase (half year after warranty ended) it started stalling, upon inspecting found out that it had melted the piston. Managed to cut about 10-15 tanks in total. Cylinder&piston kit costs more than a new decent saw. Expensive pile of...
@jamespappas423610 жыл бұрын
Here in Australia the 241 cm is $1,169 with a 16" bar.
@Woodyjims-shack7 жыл бұрын
Price in Ireland is crazy €839. Bought one in the Uk €510 good little saw.
@danhargrave18119 жыл бұрын
Don, how about a review on either the Stihl MS 660 or 661? Thanks. Keep up the interesting videos.
@donyboy739 жыл бұрын
i'll see what I can do
@billklinger94259 жыл бұрын
Buy stihl or go home! Only pros roll with these bad boys. Love it, have for years!
@danhargrave18119 жыл бұрын
Yeah, Stihl is the only choice for me as an arborist.
@TimKollat9 жыл бұрын
William Klinger Jr Stihl isn't the ONLY great chainsaw maker, but sadly its just the same for chainsaws as it is for trucks with knuckleheads. Brand snobs. Husqvarna, Dolmar, Jonsered, Echo..etc all make saws just as good as a Stihl. Its all just personal preference
@davemartin97743 жыл бұрын
@@TimKollat Right on the money. Well said!
@laszlopap192 жыл бұрын
0:08 Perfect feeling 👌
@MrGundogtrainer9 жыл бұрын
2cyclemix we figured out it is the coil when it gets hot. I will have to source a coil out for it
@MrGundogtrainer9 жыл бұрын
Donny I have a 009l topper starts great runs good. But does not want to restart when its hot. Would this be a module issue? I have opened the gas etc does not seem to be a air lock. Any repopes that you would suggest to replace with?
@donyboy739 жыл бұрын
check for spark when it's warm
@2cyclemix9 жыл бұрын
I have one as well. The one I have is about 20 years old but it runs well for its age. How old is your's?. These saws are known for flooding easily. I don't use it that often but when it gives me trouble like you're experiencing, I remove the plug and wipe it off and it starts again without problems. What works best for me is not turning it off unless I really need to.
@robertwaid29658 жыл бұрын
nice saw don.when are you going to get one?? a nice review would on a ms660 or 661 if u can.
@altreemendousdaniels62455 жыл бұрын
Did your 241 switch jump back to run automatically after shutting down.
@1989cranston5 жыл бұрын
Yes, it's a feature
@Stevet1979110 жыл бұрын
Was that air filter the washable kind? That would be nice if so?!
@donyboy7310 жыл бұрын
not sure, I would have to doublecheck
@Lasselkv2810 жыл бұрын
Hi Dony, ever had the chance to test a Husqvarna 545 saw? it´s about same size and features as this Stihl.
@sucapizda10 жыл бұрын
Can you review some of the soccer moms that are in the Stihl catalog? Thanx.
@donyboy7310 жыл бұрын
lol
@davemartin97743 жыл бұрын
Like the ones running the hedge trimmers and weedeaters?
@jamespeterson22853 жыл бұрын
Can you do a review on the ms271
@andersenchrhome10 жыл бұрын
Denmark (Europe) 4000 Dkr, ~ 731 USD on sale. Normal price $859
@squidboy076910 жыл бұрын
Nifty they added some modern features found on cars. Still, a lot of waste in terms of heat. I wonder do they make 'green' small engines for chainsaws?
@simonroberts84527 жыл бұрын
HI, JUST BOUGHT ONE TODAY,, 05 01 17... COST £470.00 WITH A 14" B & CHAIN, BUT THE SAW IS DATED 2015,, BUT STILL C-M TRONIC,,,, GREAT SAW VERY RAPID,,, UK
@pwleppa10 жыл бұрын
Thanks for the video. Could you please make a review of Stihl MS362 C-M?
@donyboy7310 жыл бұрын
ok shouldn't be a problem
@Skinnymoose9 жыл бұрын
I think I`m going to get one of these.
@CraigDohner9 жыл бұрын
Skinny, I have had the 18 inch farm boss, once you go Stihl you'll never go back. They last forever, and if you live in an area where you need wood all the time, this is probably be the right one for you if you need that big of a bar
@Skinnymoose9 жыл бұрын
Yeah I picked one up yesterday...I`ve had Sthil and Huskys....cant go wrong with either IMO.
@metz12harofreak10 жыл бұрын
I have had a question for a while now. This saw being right around 43cc's is a bigger saw but it only has 1 bar nut. I have a small ms 170 and it has 2 bar nuts. Does that chain stay tighter with 2 bar nuts? And why would Stihl put 1 nut on a bigger saw and 2 on a smaller saw? Husqvarna does the same thing.
@donyboy7310 жыл бұрын
my 180 only has one nut
@metz12harofreak10 жыл бұрын
Hmm. Odd. Does the one vs. two bar nuts make a difference? Ive ran the little homelites with one bar nuts and it seemed like i was always re-tensioning the chain all the time where i dont do it so often with my ms 170 with 2 bar nuts.
@donyboy7310 жыл бұрын
I guess we'll have to see how it goes
@angelabezanson473210 жыл бұрын
Hey Donny, love the videos keep them comming. I would love to see a review on STIHL FS 56 RC-E Grass Trimmer if possible. Thanks :)
@ViDiaz9 жыл бұрын
2015 Stihl MS241C with 35cms bar in Spain costs 750€; which is more than there in US or Canada, I think...
@donyboy739 жыл бұрын
sure is more, I wonder why since it's made in Europe anyway
@user-jk5te7rv4e Жыл бұрын
Hello sir. Can i buy Cylinder block assy STIHL MS241C ? I Stay in cambodia
@jjonesi9 жыл бұрын
In Finland MS241C costs 739.00 € = $974,22, some website price.
@adambatchelder41212 жыл бұрын
Isnt that the same weight as a 50cc 260,261 ?
@leoramirez40245 жыл бұрын
Nice saw
@3cx7110 жыл бұрын
€854 here in Ireland $1300.nice saw im thinking of buying a ms 261cm how would you rate them, btw love your vids.
@jz35126 жыл бұрын
jcb 3cx 98 from Ireland myself, thanks for the price, I was expecting it to be cheaper around €580 or something like that, €854 is pricey
@ebevis19649 жыл бұрын
Just bought a MS271 18inch Jan 30th 2015 in Aurora Indiana at Zimmer Tractor for $409.00 plus tax .. Nice Saw To ...
@smallenginedude7110 жыл бұрын
probably double the price here in australia.
@AndrewBrowner6 жыл бұрын
is that "M-Tronic" ow whatever they call it electric ignition/fuel control a great innovation that wakes up the saw and works reliably or is it just a head ache with frequent failures and it makes trouble shooting alot more complicated then an all mechanical system
@cantevenseeyourightn6 жыл бұрын
Andrew Browner I’ve had good experiences with my 362cm , which also has the electric. I think they’re pretty reliable
@MrBriangardiner9 жыл бұрын
Hi dony im just looking at buying a new ground saw . but im afraid of buying problems I don't like the idea of these new electronic machines they say they can put them on a computer like your car and that's been expensive to me over the years with cars any thing you recommend good old faithful's and all THANKS
@donyboy739 жыл бұрын
IF YOU'RE WORRIED ABOUT THAT THEN JUST GET A SAW Without the m-tronic or auto-tune
@geojor10 жыл бұрын
dony, a foam air filter must impede the flow of air somewhat, do you agree?...
@donyboy7310 жыл бұрын
not usually if the proper filter is used, if too much oil gets into it then it will impede the flow
@MrGillespieable8 жыл бұрын
hey dony. hope all is well. would love to see a review on the stihl 261. and maybe the Husqvarna 550 xp. love the 50cc saws, seams their weight and power are almost perfect for most work . ..at least for most people. and have been wondering if you have had to work on any of the m-tronic / auto tune saws yet.
@donyboy738 жыл бұрын
+Steven Gillespie i'll see what I can do, I haven't worked on the M-TRONIC specifically
@MrGillespieable8 жыл бұрын
thanx dony for the reply. thank you for all the hard work you do filming and knowledge you share. your channel is my favorite. love soaken up all that knowledge you have.
@mikem195910 жыл бұрын
All the local Stihl dealers list it as DSRP $549.95 but none have it in stock or list an "out-the-door" price. I'm near Chicago.
@donyboy7310 жыл бұрын
here they have sold out already
@leetoner61589 жыл бұрын
My Nelson, BC Stihl dealer lists that 241 at $649.95! Where in Canada are you? I am shopping for possibly Stihl vs Husky. I need a reliable, easily repaired small saw for approximately 1-2 cords annually. Would something like the MS181C with Easy2Start homeowner grade be gimmicky breaking plastic garbage? Is it worth the extra $200 to go professional grade? I am tired of yearly fixing junk. Please reply. It is firewood season and I've been trying to fix my saw all day
@donyboy739 жыл бұрын
yes you are better to spend more and get professional grade. the 181 is just for small stuff occasionally
@kussifury6 жыл бұрын
woowww magnezium case, m-tronic... nice...
@gjamesb538 жыл бұрын
$549.95 Florida USA
@nickosborne198210 жыл бұрын
As alway great vid ! Can you do one on a ms261 as I just got one cost £690 don't no what that would be in $