Somethings wrong here. That 562xp should go right through that wood just as quick or quicker than the stihl.

I have a walkerized 362c that’s probably 6 years old and my dad just bought the 2024 husky 562xp my 362c came with a 24 inch bar but I changed it to a 20 inch bar with what I was told a full throttle tooth chain instead of a skip tooth and it eats wood like nothing! Can’t wait to do the comparison!

Both saws are awesome. But chain speed and the grind of the chain is important.

Το husgvarna έχει δουλέψει πολύ ενώ το Stihl φαίνεται πιο καινούριο

Oregon chains are good chains to use but it matters what type of chain being used a full chisel would be best or semi chisel would be OK too but I do prefer Husqvarna full chisel chains in thicker wood

My personal opinion is that you listen to the saw even in doing comparison the saw tells you what it likes and how it gives you its best performance, the second guy is a lot better with a saw than the first. Both guys are pretty good with saws, but a brand new oregon chain it should have been husky hands down, but overall good job fellas I appreciate your videos keep up the good work, this is my favorite new channel

Guess now we know to tune the chain before cutting with one right out of the box. Nice way to handicap something.

The all new 562xp Mark II goes on sale in the US in a few months. Lighter with tons of upgrades and more low end torque- plus a lower price. The Stihl MS362 won’t have a chance.

Pitoyable, les deux machines ne sont pas à égalité? La Stihl à une chaine qui coupe contrairement à la Husqvarna Quelle besoin de dénigrer un produit aux profit d'un autre !!! peut-être la rémunération ou simplement la bêtise

I’m looking to buy a chainsaw this week. I’m comparing both brands. It seems that the Stihls turn a touch more RPMs and they eat through wood because of it. The Husky balance better, are often times referred to as more comfortable to run and many claim they are longer lasting because they don’t rev quite as hard. I’m wanting something around the 55cc range. We have both Stihl and Husky chainsaws on the farm. They are older and smaller saws. Neither are pro saws. We make them work. I’m kinda wanting a do it all saw. We had a massive straight line wind event and about every chain saw around the area was sold except the huge ones that are $1000 and more. They did have a Stihl 291 and 362 I looked at. I’m wanting to go check out the Husky offerings this week as well. Is there any other brands I should compare? I am not going to be running this saw really hard. It will be used mainly for storm clean up. I am wanting the ability to cut whatever I encounter though. I wonder if a 271 wouldn’t be enough for me though.

The stihl was also looked to be put through the cleaner part of the log. Where as the husky look like she was chewing on knots most of the time

No way husky lost by that much they should of be neck to neck u can tell the sthil had a sharper chain

Should have swapped out chais and tested that way

Same guy should have sharpened both chainsaw chains for this test and use the same chains as far as skip tooth or full comp

Salutare .treabă bună.cu comparații uimitoare .

Яку олію даєте до бензину

I can see the chain on husq was not as sharp as the still not a go compersent at all

Ce înseamnă asta ! Acest video este făcut pentru a avantaja Stihl-ul se vede cu ochiul liber! 😡 Husqvarna poate mai mult de atât ! Bătaie de joc, rușine pentru toți cei care faceți asta... Eu dețin acest motofierastrau Husqvarna 562 xp și am făcut comparație cu stihl-ul 362 și din păcate prietenul meu a pierdut cu Stihl 362! Din păcate mult prea urat a pierdut... Ce faceți voi in acest video este rușine! rușine să vă fie!😡😤 Husqvarna va rămâne mereu pe locul 1! Și mereu va fi regina pădurilor!👍 Felicitări Husqvarna, felicitări Suedia pentru istoria frumoasă a acestei mărci de renume mondial!👏

A good sharp chain will pull its self thu the whole cut. Matter of fact you only need one hand on saw until cut is almost finished. If u get it good , if u dont well....

It's all about sharpening

This is a false test, I have a Husqvarna 562 xpG with 18inch xcut chain and it blazes through. I just cut a yellow birch 17.5 inch round green wood and it took 20 seconds or less and it was half dull. I will grab my brand new chain backup and try again fully sharp. So change that Oregon chain for a real Xcut chain that is recommended for the saw. You are comparing apples to oranges. Misleading people by not doing fair test. It is a 3/8 pitch and throws chips. I seen in this video the Husqvarna chain is throwing dust not chips. Try again boys.

N importe quoi la husqvarna et bien plus rapide en réalité

birde oleo mac gs 650 ile husqvarna ve stilh deneseniz

new subscriber👍👍

Ot least first round was too far apart then sec round husky looked like it was cutting much better

562 xp is dull. When we compare both chains must be brand new

The hell

Seriously Oregon chain...amateur hour comparison

I got a 445 x torq will out cutt both saws Husqvarna

What’s wrong with you lil boys

Something s wrong with that husky They use to cut much faster than that I seen it many times In most of the videos husky 562 beats 362

Non tagliano una sega...i test si fanno con le catene affilate e si prende i secondi ad ogni taglio.

What more could I possibly say, STIHL RUNS THE YARD. 😊👍🏿👑👑👑👑👑 #stihlpower #stihlisyourdaddy #stihlrunstheyard

Of course the Oregon chain held you back. The Husky is better hands down!

I own both saws the 562xp is a junk saw from the factory who cares how fast it can cut if it won't start

What is this. Should have done a better job comparing saws vs saws

My 441c will smoke them both no contest

wtf is a steal ffs

The 562 saw has been the worst chainsaw ever made its had many different variations like 5 or 6 and its still has problems bearings go out needs to be reprogrammed and now they came out with a mark 2 562 new improved pile of junk. Husqvarna as a company is going downhill fast from building junk saws