Can't wait for the review. Looks like a nice saw . Love the outtakes. Take care and have a blessed week.

My 20” Stihl 391 melts through logs kzfaq.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 but I find myself grabbing this Oregon more because it’s quit and theirs no engine maintenance. You still need to maintain the chain and bar though. It cuts great even though it doesn’t have the power or weight of a gas saw, and the bucking spikes work really well, almost too well actually. I actually burnt up the motor on my first one using the bucking spikes. I pushed it too much through cottonwood, but I liked it enough to buy a second one. I make sure not to get the motor too hot now and it’s been running great. It’s still heavy enough with enough power to melt through most cuts too. When it stops cutting so well make sure there aren’t wood chips stuck in the chain and don’t let the chips clog the saw. Remember when you see sawdust instead of chips it’s time to sharpen the chain. I tried the self sharpening, I didn’t think it worked that well. I like that when you let go of the trigger the chain stops almost immediately. It’s tool less adjustment and bar removal is a snap. Like all saws they leak bar oil, so don’t store it full, and open the cap just a little to prevent pressure from ambient temperature changes. I store it on a piece of cardboard on a tote lid to contain any mess. Make sure you get some bar oil with the saw, it comes with just enough for you to start cutting but run out before you’re finished with whatever you’re cutting.

I've been using the 400 for 3 months now on a 18 inch bar and Square tooth chain it's an amazing saw. I was using a ms 462 but just wanted something a bit lighter for limbing.For anyone who is thinking about getting this saw, you won't be disappointed

Enjoyed it. Look forward to the full review. Glad to see Stihl come out with another model in the 60cc class.

Excellent demonstration! Looking forward for the 400 to come to the USA. Keep up the great work! Be blessed my fellow Arborist.

Had a few days on a ms400 lately and i have slowly fallen in love with it, i find it well balanced , good throttle response, and a big step up from the 362 as it seems to have much more power, i am sure you will feel the same about it as i cant see anyone not liking that saw, i will wait for your verdict !!

Ich freue mich schon auf deine weiteren Erfahrungen mit dieser säge! Toll gemacht!

we can't all be cool like female lumberjack but you do a great show of how too be cool .. great review

I've been waiting for this!

Perfect set up

Love Timber! Nice saw! Pretty amazing yourself.

Great video - Look forward to the full review. Nice to see Timber in the video 🤣

I like the concept of a magnesium piston, but the longevity has to be considered I would imagine. Be interested to see the lifespan of that saw.

unfortunately I have not yet had the opportunity to try it! Good as always congratulations

Love my 261 but looking for something with a bit more power. Not extremely impressed with the 362 and most of the time I don't need a 461 or the 462. The 400 might fit my needs.

Felixia and Heidi... A Nice and Powerfull Team!

Sounds like the ultimate firewood saw. Should pull a 24 well but I'd run a 20 on it most of the time.

I think the 400 is a great saw to serve as between the 362 and the 462. I noticed it revs up faster than those 2 saws as well.

This could be the must have all around saw . Been in the market for a good higher power mid range . I better wait and see the test results 👍

Thanks for the review 💕💕

My wife will be so glad that you named your saw after her.

Looking forward to the review I need a new saw

Magnesium piston will accelerate quicker as it is much lighter than the standard piston 😀

I picked mine up today 12_30_21. I love it sofar.

Will be watching for your review don’t have that saw in our area yet

The 362. With the bark box exhaust is awesome.

Thank you for showing that! That is the first view I've had of it. I wonder if it will be as difficult to get in the US as the 500i was when it came out? Of course, this creates many problems. I tell myself I'm done purchasing chainsaws, and they come out with something that I think I would like to have, lol! 😱

Do you find the Husky design with the outboard clutch and the more centred bar location to be superior to the Stihl design? Husky claims better rotational handling. I am looking at the 550 xpII vs 261. Thanks

I have had a 400 since last may (in the UK). It’s good! Put a 24 inch Tsumara light weight bar on it and a West Coast Bark Box on it and it’s even better😁

I love my ms 360 which is about the same size. I have never seen a 400C at my local dealers. I do have a MS 241 CM but I am not a fan of the Memtronic system. I know how to tune my saws for various temperatures and I do not need a one size fits all system to tell me how to run my saws. I like the lesser weight because my ms 440, 460 and 660 are a tad heavy.

So it replaces MS380 or the old 038 magnum .correct.?

Great video Felixia! Have you used any of the after market bark boxes for the Stihls?

The best and nice lumberjack ever:)

Fantastic video female lumber jack! Love the way you say"delicious power" , can tell you can't wait to make Heidi into a dirty girl 😂! Can't wait to see your awesome review of the newest tool in your arsenal, put her through the paces! Keep up the great work 👍👍💪💪😎!

Hi, what are you thinking about fuel consumption like 362 or much more? Timba is the best!

Thanks for the first impressions. I wonder how long before we can get them in the USA 🇺🇸

Looks like this might make it to the USA in a year or two. By then my 60cc class 10yo saw should be about ready to be retired. Looking forward to your more in-depth review.

What the biggest bar and chain can you run on that saw? I think you said 24in bar?

Great job. I cut timber every day. I occasionally use a 362 to limb in smaller softwood timber. This might be a better option. Nice review

I own a 362 c-m and I actually did my treecutting-license with my instructors 400c. I love my 362 but the pull and aggressiveness is remarkable on the 400c. I run a 20inch bar on my 362 as well but it runs way better on the 400c.

Super cool video. I have an MS361 that was ported by Scott Kunz. It probably has about the same power as the MS400.

not sure its worth money , but the airfilter does have a flock wrap prefilter available . will be watching for the finale :-)

Do you like the "light" bars by Stihl?? i want a 32" for my 462.

Is that a paper air-filter? I suspect those will have to be replaced frequently and that may be a significant cost over time. I much prefer the ever lasting old style air-filters that one would simply disassemble and clean from the inside out with compressed air.

Awesome First Impression Vlog there Beautiful and a Very Nice Saw. Stihl makes some Great Saws but Why Sooo many ⁉️They seems to be Quite close in their Power Ranges. Is this Saw Fuel Injected as the 500i⁉️ looking Forward for your Full Review in the Future. Hey to TIMBER 😁👍🏾👏🏾💯‼️‼️‼️

Definetely best chainsaw in its class 💪

Looks like a fantastic chainsaw.

hi from scotland it is very nice looking saw.a good video

video is packed full of info. nice beautiful pretty . maybe a pink wrap around???

Your next door neighbours must love you revving up Chainsaws all the time, there probably hoping you'll go all battery saw soon. 🤣😂🤣😂😅😁

187 comments in two days!! People are loving the reviews - good work

Hi how r u hope u had a nice weekend what a nice looking saw id love one love the video thanks for review

Hopefully these get to my area in the US.

As Thomas says Magnus piston will make a huge difference

more power than 362c is pertty good!! i repaired one and electronic carb it was a wild thing . 400 gotta be near freakish :)

Very nice video! Thank you

Looks like an upgrade of the MS 391.

Looks great 👍

hi Felixia: congratulations on the reviews: you are one of the few that provides data on the weight of the chainsaw (including bar / petrol / oil). From your reviews I was able to compare the real weight of the stihl with my chainsaw (Dolmar ps5105) and understand that between the Stihl 400 and the Dolmar there is a difference of about 700 grams Would it be possible to do a review with the stihl 462?)

That wood carving of a bird has a good view =)

That is a very nice saw

Have you ever climbed with the old school system?. Using a blake's hitch or a taunt line hitch?

Will you do a comparison of Sthil versus husqvarna

I was wondering. I want to start a little firewood business and am looking for a saw. I was thinking about the 261 but I think it would be too small to fell and cut up all of the trees. So I was thinking either the 362 or the 400. What would you recommend?

I love my 460 and Tulip Bacon.

Sweet a new saw 😁👍

Oh you were showing us a saw I was just looking at you

I’m looking forward to seeing you use that MS 400c and can you please give us a honest opinion about the way it runs and performance regards Andrew

661 and a 201 is the perfect combo.

A magnesium piston at 14,000 RPM, I sure hope Stihl did their research on this for wear, tear, and longevity. I really like the concept!

Nice saw

Essa maquina vai vim pro Brasil?

I’m wondering if you get new models were you are before me in the states.

Very nice, thank you.

Be nice to see what Randy from Mastermind Work Saws can do with that 400c. He’s in Tennessee, USA and a super guy. You’ll have to check out his channel as well. Enjoy the new saw.

Hello there, over here in Canada we are having trouble getting saws , my local dealer only has a few saws left to sell and doesn't know when they are getting any in. Just wondering if you name all your saws? LOL. That looks like a nice saw. Thanks for sharing and hope all is well

Funny you refer to this saw in the feminine gender. Love your channel. I have two MS 261's and your video on maintaining them is Awesome. Brycat Firewood!

Is there an ETA on US sales?

Could we have a review on your new harness maybe?

Would that 400 be of the same engineering as the 500 is?

Where can i buy the jacket and my favorite saw is the 500i because it works like schmidt's cat. xD

I assume that this saw is a non-M-Tronic since there is no M in the model number??? As in MS400 C, and not MS400 C-M?? Didn't get a look at the air filter cover on its left side in the video.

I wonder how this saw compares to the Husky 560?

Here in italy we haven't THIS,at yet... Last week I bought the MS391 😇

I want one!

nice video, very good saw, Simba is cool, you are nice and happy girl. Stay healthy and happy forever ;-) Hi from Czech rep.

I would have to put a Bark Box on it by westcoastsaw

Hey girl when will this be available in the USA?

Hello its à great saw good performanced

Hi there can you please do another KZfaq video clip on the MS 400 regards Andrew

Buenas noches !!!! Una gran maquina , 400 Sthil

I forgot to state I have one on order but it's taking a while to get it.

I’m thinking about getting a chainsaw soon and I’m looking at the STIHL MS 241 C-M chainsaw. It is a small professional saw so if you could get your hands on one and try it and see what you think then that would be a massive help! Thanks

Is it a pro saw also is it fuel injection

Wonder what the retail is on that one?

I just brought one today

Legal muito bom 👏👍

Could you do a review of the Nordforest Titan or the Forstreich TR24?

Lite synd att den inte kommer med handtags värme,kommer kanske senare?

Sweet chainsaw. Limb walking videos would be cool