Thanks a lot for watching, I hope you liked the video! Don’t forget to SUBSCRIBE! Folow me on INSTAGRAM! / avknives_
Пікірлер: 112
@stillshot26 ай бұрын
"But officer, this is just the stock exhaust!"
@Farlig692 жыл бұрын
Cool job - a wee comment, the first layer or two of fabric around the hot pipe should be stainless steel wool to better tolerate the heat. Glass wool tends to burn out quite quickly so you will notice the sound getting louder fairly soon. It's okay for riveted mufflers where you can change the wadding very quickly but for a welded affair it's gonna be a pain in the arse to replace...
@alexrice14512 жыл бұрын
Much cheaper than a new system. Good job
@haydendavid32482 жыл бұрын
@Empty-07 I mean yes and no, expensive af gear but it looked like he just had that gear, now for the average joe, you can usually find someone with a welder or any of the grinder material stuff. (As for why he used a stick weld, I couldn’t tell ya)
@sam_music5554 ай бұрын
@@haydendavid3248 welder and grinder are probably the least problem, you buy once and forget. I wonder about vertical drill, and the ability to weld properly...
@corjohn4 Жыл бұрын
This sounds awesome!!! Better than actual exhausts too! Wish you could do this for mine lol
@RAYQUAZA_X2 ай бұрын
You inspired me. I will not by akra axhaust right now. First ill try to do the same but with a smaller diameter tube and try to make a S shape with holes, not a straight large pipe like u did.
@nodwaa9227 Жыл бұрын
sneaky straight pipe :D
@NickParkerPhoto2 жыл бұрын
Can I mail you my stock exhaust to have this done?
@Sinister_fartbox2 жыл бұрын
Yes go ahead.
@CLS55-Fonz Жыл бұрын
You'd be paying more than buying an aftermarket slip on
@Robocoppat2 жыл бұрын
I'm not easily impressed but this is the most impressive thing I've seen on KZfaq regarding a MT-07. It sounds Awesome 👍😎. Consider me a subscriber.
@AlekR14 ай бұрын
I did the same thing on my exhaust, and got a great sound. But the engine lost a little power, is it necessary to remap after the exhaust modification?
@demon8172 жыл бұрын
This is a great idea, BUT for $130 or less you could have got a China exhaust, with all the labor does not make sense and you still have a ton of weight. A+ for effort.
@bacano44002 жыл бұрын
It makes sense for plAces where copa fine u for have customizations
@MT-THNDR2072 жыл бұрын
It probably costs more to do this whole operation than it does to get an aftermarket exhaust system.
@Bon-mz5kb Жыл бұрын
I dont think so. If u include cost for the machine and tools to do this, then maybe. But just the steel pipe, then it would cost very little. A full system cost over $1000 where I am from
@vennemans9113 Жыл бұрын
Even if it does cost more which i doubt , having his own made exhaust is a lot more fun 👍
@MT-THNDR207 Жыл бұрын
@@vennemans9113 That is true. An engaging project
@lonescoota9542 Жыл бұрын
If you have got the tools I don’t think its expensive
@MT-THNDR207 Жыл бұрын
@lonescoota9542 He literally had to buy all the packing, though.
@livingon2wheels2 жыл бұрын
I am shocked and amazed!
@ramonesteban54732 жыл бұрын
Increíble trabajo , espectacular... Muchas gracias por el vídeo.
@moonchild53645 ай бұрын
Questions! @2:55 is this stainless? @3:05 what is the material name he is holding? the curved short pipe.
@Cesar-jg8hm Жыл бұрын
Mucho trabajo, para el sonido final,a seguir probando, yo ya he hecho varios,y mi consejo es que solo modifiques el tubo final de salida,es sonido será mucho más bonito
@traskabraska2 жыл бұрын
top notch job. you're a legend
@cobe_nisam.radio.trrraku4 ай бұрын
Hi mate! 🙋🏻♂️ Do you think this modification is possible also with the new generation od MT07 (2021+) where CAT is located in the pipes (and not in the exhaust chamber)? Thanks in advance! 🤙🏼
@ojonfpv25 күн бұрын
You're a genius
@BBFazer5 ай бұрын
Whoaw this impresses me. I'm going to buy a second hand exhaust for my tracer 7 to experiment in the same way you did. Thanks for the inspiration.
@stardust63852 жыл бұрын
Nice job, it looks stock but it's not. Please remove the db killer when you use the bike :)
@AVmake2 жыл бұрын
Way to laud without it, I like it but others dont 🤣
@lukatopic91372 жыл бұрын
Great video!
@AVmake2 жыл бұрын
Thank you Luka 🙏
@alesandrocircu89197 ай бұрын
Hello what wadding do you use for it?
@jasonlawrence8302 Жыл бұрын
you can basicly get the same sound by just drilling some holes around the front outlet under the cover and it takes about 5-10 minutes LMAO!
@Reeds_World3 ай бұрын
Sharing my experience, just finished this for my 2018 XSR700 1) This takes a lot of time and is a pain in the ass. Easily 8 hours in disassembly, drilling & prep - At least 6 hours tig welding the thing back together 2) I used a cheap AutoZone 2"-2.5" exhaust reducer - Summit 1" - 1.5" vibrant fitting - 1" bent pipe that was inside the exhaust & packed with HLX-160-1112 from Summit too 3) The jump at 2:08 is very deceiving, cutting the can in half on the outside is not terrible, maybe an hour. Then you will spend forever cutting out all of the seam welds, and you have to cut them all out or else the thing wont come apart. When you go to weld it back together I cut scrap stainless pieces to fill all the massive seam weld holes, there was like 8-10 patches. 4) Drill as many holes in your pipe as possible, I didn't have enough the first go around, it was unbelievably loud and sounded like dog water. So I had to cut it back open and drill more holes. Fortunately, cutting it open 2nd go around is very fast to weld back together, took maybe 20 min. 5) I left the header attached the whole time. I ended up cutting the top half off, unlike the bottom half in this video. Id probably recommend cutting the bottom out, sucks either way and there wont be much difference. To get the cat out I cut the 3" pipe holding it in down the top, pried it open, cut the pieces i pried off, leaving you with half a pipe, then pried away till i got it out, then cut the rest of that 3" pipe. Reason I did this in the first place is I've cut several other exhausts open on bikes I've owned, all can style though, like on my duke 390, crf450x, crf250x, klr650 and removed baffles. All of them were very easy and quick. This was a different beast. If you can cut and weld, you can do this, and id still recommend it.
@sam_music5554 ай бұрын
And What about emission checks? Would it pass an inspection?
@mhamedlaidioui75822 жыл бұрын
Super 👍 merci beaucoup pour cette vidéo mon ami 👍🙏👍
@ivosilvestre9687 Жыл бұрын
Awesome! Thank you. can you please list the material that you used? like the diameter of the tube and angle tubes plz? Thx.
@jackmcminn252011 ай бұрын
Pretty nice and sounds as good as the expensive ones
@googlelimp9834 Жыл бұрын
fair play mate not bad at all
@user-re2dk5rc3q2 жыл бұрын
Nice Knife 😁
@erlcarmen3 ай бұрын
Nice good sound
@chrisfr34802 жыл бұрын
Super boulot mais félicitations 👍🇫🇷
@ar2043 Жыл бұрын
Genius!!! Thanks!!!
@Tortillo_Adventure Жыл бұрын
Hi, wich dimensión for DB killer?
@Sobrevivente7624 ай бұрын
Ficou excelente, porém, bastava colocar um difusor é muito mais fácil e tem a probabilidade de obter 13 tipos de sons no único escapando, com abertura total em apenas 3 segundos. Teria o som original e + 13 sons diferentes.
@Z900_Wizz2 жыл бұрын
I'm just going to buy an akrapovic system
@michaelmitchell5909 Жыл бұрын
Bad ass man. Great job, nice work
@XatRingtone2 жыл бұрын
very good. I also have Honda CBR600RR motorcycles the sound is very loud. the police make a remark😜
@beno66872 жыл бұрын
Can you do Yamaha R3/MT03 as well ? Ive been looking for R3/MT03 but I cant find one
@vinceianni40262 жыл бұрын
Hello AV good job well done
@AVmake2 жыл бұрын
Thank you!
@motoreli1032 жыл бұрын
Can you do this on Yamaha MT03?
@thextraordinaregine2 жыл бұрын
wish this comment will get notice, i have a questions. 1. does the holes on the perforation part give it less power? 2. does the size of the chamber choke performance? thank you
@traskabraska2 жыл бұрын
in general, to my knowledge, it might happen that if you "open" the exhaust you lose some power at low regime and gain some power at high regime. nothing a good map can't fix btw
@rexcarlyle59142 жыл бұрын
Where did you get the piece of stainless steel piping?
@cousinstu2 жыл бұрын
"Factory" 🤣
@Przygody.Z.Jednosladem2 жыл бұрын
Good job 👍
@eatingelizabethsfrizbee3 ай бұрын
Nice job.
@eumsm8185 Жыл бұрын
so pecou em não usar palha de aço n2 ao redor da flauta, antes da fibra de vidro, e depois da fibra de vidro podia encher mt mais com a lã de vidro, daria um som mais grave, menos estridente ....mas ficou um trampo legal, porem trabalhoso, e caso se arrependa, ou queira o som original, terá que arrumar um escape original, que é muito mais caro, do que se tivesse comprado logo um esportivo
@JAMM97132 жыл бұрын
Alguien sabría decir las medidas de los tubos?
@HandicraftChannel-bj6nw2 жыл бұрын
hahaha amazing 👏
@MiguelCastillo-xm5iv Жыл бұрын
just what i need
@gamesettings101 Жыл бұрын
Here in the Philippines we call it "kalkal pipe"
@bunnyonabunwithagunnicepun56892 жыл бұрын
Funny, I was just thinking about making a homemade exhaust silencer and anonymously gifting it to my neighbor with a loud motorbike!
@Bon-mz5kb Жыл бұрын
Why do you need the cotton? And why make multiple holes in the inside pipe in the first place?
@thewiredfox269111 ай бұрын
Maybe a bit late to ask, but do you know the lengths of the tube sections? I have a different idea and that info would be very useful.
@copeland6912 жыл бұрын
what size piping did you use
@copeland6912 жыл бұрын
also what is the spacing and size of the holes you drilled
@kulungshow Жыл бұрын
AMAZING
@Allen-Doe2 жыл бұрын
amazing 😍.. Can I do this to my honda Cb500x .. Bike is too silent 😢
@secretagentrandybeans52982 жыл бұрын
Trust me if you just get an aftermarket muffler it will be plenty loud
@osmanakdin5 ай бұрын
does it gets you caught by police
@gamesettings101 Жыл бұрын
Is it possible to let the catalytic converter on with the same result?
@iamvenk02 жыл бұрын
I like the stock sound, very nice not worth in my opinion to buy akrapovic or something else.. 1. you going to have problems with police 2. you cant pass the motorcycle service if you dont have stock parts.
@Lukas-px1sx2 жыл бұрын
Lol if you buy a original Akrapovic full system you will never have any problem w police or service bcs you have a homologation cards
@iamvenk02 жыл бұрын
True, but can you give me 1700 euro for a full system :)
@Lukas-px1sx2 жыл бұрын
@@iamvenk0 In my county is about half of price :D
@iamvenk02 жыл бұрын
Good for you man. I like the stock sound, so for me there is no point paying 1700 euros for not almost but close sound. Because if i wanted the good sound i have to remove the db killer. Doing that i will have problems with police. This is what i sayd in the first comment. So yeah :)
@Lukas-px1sx2 жыл бұрын
@@iamvenk0Where are you from ? I remember getting pulled of on my yamaha YZF 125 with db out :D they were super mad about it, but they let me go without any penalty
@arcadeshop8636 Жыл бұрын
Muy buen trabajo, lamentablemente el sonido no es el mismo escuchado desde youtube, presencialmente es otra cosa. Saludos desde mi país CHILE 🇨🇱
@DeXx_The_Reaper10 ай бұрын
What is that white thing called? 4:10
@raff832 жыл бұрын
WYSZŁA TAKA PIERDZIAWKA :-)
@stekiboy2 жыл бұрын
Dobaaar!
@tylerrowling19262 жыл бұрын
If I send you mine can I pay you to do that?
@itachi_mj9924 Жыл бұрын
Well shit that sounds good 👍 🤔
@radder762 жыл бұрын
Исполнил, конечно классно, но такие "перделки" под окнами очень раздражают!!!
@user-mm4xn8hm2h2 жыл бұрын
225👍
@nobbystyles4807 Жыл бұрын
whaaaat?? why would you go through all that nonsense of cutting it up and then welding it back together instead either doing a full decat of just putting a slip on on it? what a load of bollocks.
@carstenbeton14372 ай бұрын
4:25 Glasfaserwolle ohne Handschuhe. 😂😂😒😒
@JacobTJ12 жыл бұрын
Might as well start a company
@mealex3032 жыл бұрын
Yeah but no catalytic converter
@p0pxcornx3002 жыл бұрын
Bro that thing is literally straight piped
@allatron54902 жыл бұрын
Elbu swissrace 2.0
@PaoXiong86 Жыл бұрын
it's cheaper to buy an ebay exhaust lolz
@contraanovaordemmundial6665 Жыл бұрын
Era melhor ter colocado um escapamento esportivo mesmo, acabou com o original assim.
@galaxy_x7773Ай бұрын
Bruh🤦🏻♂️😭
@mbee1337 Жыл бұрын
by far too loud, that's just stupid loud, but nice try though
@bibiranger2 жыл бұрын
sounds like shit lmao get an akrapovic
@jk69562 жыл бұрын
My gosh does anyone ever rev the engine more than half a second??? So annoying.
@danieljarmolik2 жыл бұрын
Sounds rubbish
@faultyclone0013 Жыл бұрын
Sounds like a tin can
@ivangiulianotti8945 Жыл бұрын
Usare gli attrezzi così è pericoloso ⚠️!se la circolare scappa ti tagli una mano! Queste cose non devono essere insegnare! Solo gli specialisti devono fare queste cose😡😡😡