Stock Ram 2500 on 37s Climbs The Wall At Poughkeepsie Gulch Colorado

Рет қаралды 9,597

2 жыл бұрын

I said “stock” but there is one suspension modification and that is a Thuren Fabrication’s front sway bar that keeps the tires from rubbing during tight turns and it does afford a bit more articulation of the front axle. The rear axle’s sway bar was disconnected by removing one end link from its frame attachment point. Even though my son was very concerned in the video, few jumps on the Go Rhino Steps had them straightened back out.

Пікірлер: 34

@tanktheram 2 ай бұрын

Nice! Love seeing these big trucks dance up rocks. My 19 Pwag is on 35's no lift, and I know 37's maybe 38's would also be no issue. Also just dropped a rear endlink on my truck, so much smoother and more articulation. Nice job

@comptonoverland7442 Жыл бұрын

My God I don't need 8 people spotting me !! My lord.

@matheiu556 Жыл бұрын

Yeah, it was a bit much! But they were trying to help…

@chad2886 Жыл бұрын

Nice driving. People overlook these trucks because they're huge and heavy but they can crawl and wheel. I wish I had lower gears in my 18 6.7 to run 37s but with 3.42s in the axles I'm gonna go with 35s. I run a tall contractor cap on mine and live and travel out of it for months at a time. Very capable trucks bone stock.

@InvolvedwithAI Жыл бұрын

17 MegaCab 6.7 3.42's with 38x13.50r18 stock wheels 3.5/2.5 lift here. 37's before. Just don't blast and jerk the truck around will be fine.

@highdesertexplorer123 11 ай бұрын

I think we have very similar rigs. Except I have the 6.4 hemi and 35’s. I think we even have the same running boards, go rhino rb20. I came across your video because I was looking for ram 2500 with 37’s on factory wheels. I want to go to 37’s on mine but my factory wheels are 8” wide and all the 37’s I have seen say a minimum of 8.5” wheel is the requirement. Have you had any issues running 37’s on the factory wheels?

@leaventhomas4617 Жыл бұрын

Great job! Don’t listen to the haters it’s your truck do what you want!

@bigmattb89 Жыл бұрын

37x12.50? Just curious wanted to do the same

@loveracing1988 5 ай бұрын

You need actual rock sliders and a cjc intercooler guard and you'll be golden.

@InvolvedwithAI Жыл бұрын

Yes the first line was bad guided, wouldn't have needed those 2 rocks to help over scraping the step.

@drewolm Жыл бұрын

Full size rugs just don’t get the love they should.

@1womanmanycars Ай бұрын

Need less spotters

@SS-iw1gf 2 жыл бұрын

Come on a new Cummins does not belong up there, good job on not hurting your beautiful truck.

@heartlandadventures901 2 жыл бұрын

I think that a Ram is just not what you expect to see, and that’s where the questions of “why” come from. If we saw a $50-$60k Rubicon, Bronco, or 4Runner up there, we wouldn’t bat an eye. These trucks are very capable and under estimated, it only takes a few mods to make them extremely competent off-road explores. This truck has carried the five of us, a camp trailer, all of the gear we need for two weeks in the mountains, and has done it all even in some very serious terrain. I’m extremely pleased with where it’s taken me and my family.

@sas5039 2 жыл бұрын

@@heartlandadventures901 Congratulations, great performance. I agree, the Ram (with a few conversions / 37 "etc) is a very good off-road vehicle. Here are a few videos of my experiences with the RAM 1500/2500 kzfaq.info/get/bejne/ldlkbJCox7mRXYk.html kzfaq.info/get/bejne/iLZyoNdqnLmyaI0.html kzfaq.info/get/bejne/bL-Yoppp2dfYdok.html kzfaq.info/get/bejne/osV6m5umuazenqM.html

@dlindf Жыл бұрын

@@heartlandadventures901 Just did it last week in my 19' ram 3500. love your video!

@stevenfoust3782 Жыл бұрын

Impressive and not at the same time. You know it’s not tall enough to avoid stuff and the spotters and rocks were bad, but it did make the crawl.

@Steadierpark Жыл бұрын

The people helping seem annoying. Just go.

@capomand45 2 жыл бұрын

Stupid is as stupid does.

@comptonoverland7442 Жыл бұрын

Get 25 spotters for that monstrosity.

@Patriot-pq1ku Жыл бұрын

Why!!!!

@phillipmcintosh5149 Жыл бұрын

There is no such thing as a stock 2500 on 37”s.

@supersami7748 Жыл бұрын

Thank you, I was amazed when that description was used.

@matheiu556 Жыл бұрын

I guess I could have been clearer and said “everything is stock except for 37s” but I assumed you were smart people and could grasp the nuance…. My bad! 😆

@muddyram Жыл бұрын

Also amazing how many people don’t realize you can fit 37s on these

@craighubert9840 Жыл бұрын

The stupidity of some people is astounding

@JTM31826 10 ай бұрын

That dude is so annoying in the blue shirt

@dc_advntr5525 Жыл бұрын

If it’s on 37s it’s NOT stock 😂😂😂

@muddyram Жыл бұрын

37s fit just fine on a stock 5th gen 2500. I’m currently running toyo MTs on my truck that are 37x12.50 and there’s zero rub at full lock or full articulation of the axle. Just have to change the offset of the rim slightly. Stock ones will rub the control arms slightly at full lock