Stock RB20DET | how to make more power | boost control and trigger disc discussion

Рет қаралды 2,348

4 ай бұрын

Informative Video Alert
Edgar goes over in detail how we make 350-400 whp on stock rb20det.
In this video we have our customers 4 door R32 and we discuss the following:
The importance of controlling the boost, why we use a trigger disc on all rb's, what you can expect with these modifications:
Turbo ATP Turbo (Garrett) GT2863R
ECU Link G4x
BTI 52mm Can gauge
3"exhaust
Blitz front mount intercooler kit
Custom Sleeper catchcan and turbo inlet
Injector dynamics ID1050's
Fuel pump aeromotive 340
aem trigger disc
Full dyno tune
About us:
We are a high performance shop located in Newark, DE. We specialize in Nissan RB, SR, KA, and VQ Toyota JZ platforms, and we offer support/maintenance for most Japanese makes.
We have both mainline Pro Hub 3000 and a Dyno Dynamics twin roller.
Pro Tuner/Dealer for : Link ECU, Haltech, Emtron, Uprev, Ecutek, ECUMaster, AEM Infiniti and AEM V2. We do in house engine builds, blueprinting, assembly and much more.
Our Channel:
Our KZfaq channel is dedicated to our customers. We make videos of the amazing cars that come into the Sleeper shop showcasing all the work and love that has been poured into these cars. This is our shared passion. Enjoy!
Check out our work:
www.sleepertuning.com/
or find us on social media
/ s13epertuning
/ sleeper.tuning
www.tiktok.com/@s13epertuning...
We're also on google
g.page/sleeper-tuning?gm

Пікірлер: 33

@mantistoboggan7347 2 ай бұрын

Super underrated channel on RB info. Pls don’t stop making videos.

@hellraizer06 4 ай бұрын

This guy is full of information like an encyclopedia

@Jigaboo1929 4 ай бұрын

He’s a 🐐

@em2attic 4 ай бұрын

Crazy part is sedans are usually the same weight and or lighter than the coupes, i know sounds weird lol

@Portorrro86 2 ай бұрын

The arashi turbo I purchased with an adjustable internal waste gate (via springs) for my RB25 works great and even better with the boost solenoid. 18 lbs. on a 25G turbo (factory style bolt onto stock manifold) making 467WHP with the same basic upgrades mentioned here in this video. There are also, adjustable mechanical waste gate for internally gated turbos from many reputable manufactures that simply bolt on to almost any turbo. Much cheaper solution. Far less headache as well. All you have to do is make sure you know the capacity of your turbo so that you don’t over run it. This would be the best option for lower HP applications on a decent budget. Hope this info helps anyone.

@ConvectionConnoisseur Ай бұрын

I love this channel! Such inspiration for my R32 gtst. Does that blitz intercooler also provide the "in engine bay" portions of piping from turbo outlet and cold side? Or just to the 2 holes from underneath?

@SleeperTuning Ай бұрын

Thanks so much. The Blitz intercooler kit doesn't supply all the piping you see in this video, but will fit with the factory setup. We had the turbo outlet pipe and the J pipe from the throttle body fabricated , the rest was included with the kit. Good luck with your R32!

@connornorlin9388 2 ай бұрын

Would your rec a 28 series or g25 550 turbo after around 300-350 hp and a quick spool

@EndZee Ай бұрын

How much hp can take rb20det(rp71c#2) transmission

@SleeperTuning Ай бұрын

Not sure, but we have a bunch running at 400 whp

@monsta6__ 4 ай бұрын

Safe to say I’m still ahead on the stock rb20 leader board 😅

@nissanloveR32 2 ай бұрын

What did you make ? I'm coming for ya lol

@monsta6__ 2 ай бұрын

450 whp

@nissanloveR32 2 ай бұрын

@@monsta6__ I'll try my best lol. Stock bottom end? How's she doing at those power levels

@monsta6__ 2 ай бұрын

Edgar got her riding like a champ! Plan is for me to go top mount by the end of the year and a bigger turbo to push for 500 whp. Sleeper Tuning has a build series on my car under there playlist RB20.

@nissanloveR32 2 ай бұрын

I think I seen it..with the white bumper? Does he think the pistons and rods can handle that kinda power on E85

@nissanloveR32 4 ай бұрын

What kind of ignition coils are those? Do you recommend upgrading them?

@SleeperTuning 4 ай бұрын

Those are r8 coils.(already installed) We recommend the R35 coils

@nissanloveR32 4 ай бұрын

@@SleeperTuning on it. Thank you very much

@asharamdeo4014 3 ай бұрын

Would the stock head gasket and studs last on 17-20 lbs of boost pressure.

@SleeperTuning 3 ай бұрын

its more so the power level and quality of the tune and setup of the car than the actual boost level. We run over 20 psi an excess of 400whp completely stock engine no problem.

@asharamdeo4014 3 ай бұрын

@@SleeperTuning thanks for sharing your wealth of knowledge.

@DriftNick 2 ай бұрын

Really just luck of the draw, maybe it holds 20 psi, maybe it doesn't, you won't know until you try it, do you want to risk it?

@CarMotiveYT 3 ай бұрын

How much would all this setup cost?

@SleeperTuning Ай бұрын

Every car is different depending on current status of the car, power goals, budget etc. If you'd like a personalized quote contact us through our website sleepertuning.com/contact-us and we'll be happy to get an estimate to ya!