Stooge for Control Line flying

Рет қаралды 7,692

Күн бұрын

One idea on how to make and use a stooge for control line flying. this uses a 13 lb steel plate that does not need any nails to secure to the ground. This can be used on any surface, put it down and it's ready to be used. I also use this when running up the engines in the pit area before flying.

Пікірлер: 16

@garypugh1153 6 жыл бұрын

Good advice. I gotta make one. Im 66. Gonna get back in hobby since high school.

@clscale 6 жыл бұрын

I use mine about 1/2 the time I fly because there is nobody there to help me launch, I can also use it to run up the engine before flying.

@robertcornelius3514 2 жыл бұрын

I remember when a stooge was either Curly, Moe, or Larry.

@clscale 2 жыл бұрын

Yes but my stooge is much better looking than Curly, Moe or Larry

@mariodelgado9729 Жыл бұрын

Don't forget Shemp!!

@CL-flyer 9 ай бұрын

... or Trump

@Optimiser113 11 ай бұрын

So is that control line with RC throttle? Crazy/weird. Never heard or or seen anything like it.

@clscale 11 ай бұрын

Yes CL scale and carrier have been flying with 2.4 ghz rc controls for throttle and other features. Elevator is still with the handle.

@Toscanto 5 ай бұрын

Pourquoi le ralenti..... avec poste R.C......???

@FliteForward Ай бұрын

I’ve been trying to find plans for a Fox Stunt Speed plane. The plane you’re flying in this video looks very close. Do you know where I can find plans for a Fox speed plane?

@clscale Ай бұрын

you can fly any model as long as it has a Fox 35 stunt on the nose. Pick any speed model you like that will allow the fox 35 to be mounted, must have at least one wheel. I have a cosmic wind model I use to lower the average speed. The model flies on power, you can modify the venturi, needle valve, hemi-head, back plate just has to be a fox 35 crankcase.

@MrSuzuki1187 4 ай бұрын

Looks like he is using 70 foot long lines.

@clscale 4 ай бұрын

I was flying 60 foot lines but regardless of how long the flying lines are the stooge will work. Ii use a setofkite line with its handle to pull for release.

@robertcornelius3514 2 жыл бұрын

So is a rudder not needed on control line planes?

@clscale 2 жыл бұрын

No, the position of the line guide and the CG location controls how much line tension you have. I have several models without a rudder and they all fly quite well