STOP Making These 5 Epoxy Resin Mistakes Right Now

Рет қаралды 30,726

3 ай бұрын

Ever wondered why your epoxy projects aren't turning out as flawless as you envisioned? In this video, I spill the beans on the top 5 epoxy resin mistakes that could be sabotaging your creations. Whether you're a seasoned pro or just starting out, avoiding these blunders is crucial to achieving that picture-perfect finish. I've got your back with practical tips and tricks to steer clear of these pitfalls and ensure your resin art shines. Trust me, making these mistakes can seriously wreck your hard work
Please subscribe to my Instagram here: / stevemcdonaldarts
☕ TO BUY ME A COFFEE. Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com/paypalme/SMcDo...
📹 Check Steve McDonald Crafting KZfaq Channel: / @stevemcdonaldcrafting
📬 If you would like to post something to me, please use:
PO Box 277, Newmarket, CB8 1GY, United Kingdom
😍 CHANNEL MEMBERSHIP Check out the perks by clicking the JOIN button on the link below. / @stevemcdonaldartsandc...
✍ My WEBSITE, available here: stevemcdonaldcrafts.com/
💻 As an amazon associate, I earn from qualifying purchases:
(USA👍) Here is my amazon store for the USA: www.amazon.com/shop/stevemcdo...
(UK✊) Here is my Amazon Store for the UK: www.amazon.co.uk/shop/stevemc...
Or see the individual links below for the items used in this video:
LINKS FOR MATERIALS USED FOR THE (USA👍), (UK✊) ARE BELOW:
⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇⬇
LINKS FOR USA (USA👍Only)
(USA👍) Steve's Resin Tool Kit: amzn.to/3U4vJ62
(USA👍) Teexpert Resin: teexpert-resin.com/?ref=dzQvIE4y
Discount Code: SteveTeeFEB
(USA👍) JDiction Resin: jdictioncraft.com/?ref=w6l74m...
Discount Code: Steve24
(USA👍) Mica Powder: letsresin.com/?ref=1s6dmp1n&u...
(USA👍) Long Neck Lighter: amzn.to/3wczNat
(USA👍) Heat Gun: amzn.to/48fe5j4
(USA👍) Dehumidifier: amzn.to/3wcEkJM
(USA👍) Big Wipes: amzn.to/3SSKSpJ
LINKS FOR UK (UK✊ Only)
(UK✊) Steve's Resin Tool Kit: amzn.to/3U1pm3a
(UK✊) Teexpert Resin: teexpert-resin.com/?ref=dzQvIE4y
Discount Code: SteveTeeFEB
(UK✊) JDiction Resin: jdictioncraft.com/?ref=w6l74m...
Discount code: Steve24
(UK✊) Mica Powder: letsresin.com/?ref=1s6dmp1n&u...
(UK✊) Long Neck Lighter: amzn.to/49wDAxo
(UK✊) Heat Gun: amzn.to/3Swl3KZ
(UK✊) Dehumidifier: amzn.to/3SRnRni
(UK✊) Big Wipes: amzn.to/3P1FkqX
STOP Making These 5 Epoxy Resin Mistakes Right Now
Warning: Important Health and Safety Notice:
Resin is an industrial chemical and as such should always be treated with respect and the manufacturers safety advice taken. Here is a video I have made on how I keep myself safe: • Stop Making Yourself I...

Пікірлер: 113

@uniqueresinartbymarlies3292 3 ай бұрын

Hi Steve, could you recommend that Teexpert use black numbering instead of the clear. It would make life so much easier.

@ChelseaMWilliams 3 ай бұрын

From a partially sighted person, i concur 😂

@invisiblue3212 3 ай бұрын

As another visually impaired person, I also concur. I dont mind doing it myself, but as a near blind person, it would make a difference when choosing and purchasing my new set.

@joyann385 3 ай бұрын

Agreed 100% I can only use cups/jugs with blank markings

@marelmayfield4662 2 ай бұрын

@@joyann385 enjoyed watching you work and good tips.

@lenny108 Ай бұрын

What is strange is that big companies construct wind turbines and passenger airplanes one kg of epoxy resin only costs fifty cents. If a private home hobbyist buys epoxy resin, it suddenly costs sixty dollars per kg. What's going on there?

@debbrantner6666 3 ай бұрын

I just wish the markings on the cups were dark so I could read them. I don't like marking them. But great idea!

@katrinthorsdottir7514 3 ай бұрын

Excellent advice Steve! I see so many crafters using the wrong tools for the job, and then complaining loudly about how bad this product or that product is; when it’s simply a matter of being too lazy or too frugal to get the correct tools. If you use the right tools, in the correct fashion, you’re far more likely to get good results.

@pattyharrison6386 3 ай бұрын

Yep, But dare I open my mouth & say uhmmm but you dun it wrong, lol

@callyross4821 3 ай бұрын

no matter how carefully I measure I always end up with more part B left than A. this kit looks great! those are my favorite stir wands.

@RhondaWyma 3 ай бұрын

Hey Steve hope your doing well and hope you get your new craft room done Thanks for everything you do especially Tips And Tricks much ❤❤❤❤🎉🎉❤

@jenniferkelley3777 3 ай бұрын

How ya been Steve? I feel like I'm seeing less of you. Could just be me. I hope you're doing well. You help keep me motivated to keep going ,which boy do I need some days. ❤❤❤

@OG_Beckie_Leigh 3 ай бұрын

Great information! I know from experience that I’m not to be trusted with using heat sources on my resin. I have only fused a mold once, but I have burned the resin so many times that it’s embarrassing since I KNOW BETTER. 😂😂😂 I super love using that large mixing pot too! I don’t even want to use my other ones after getting that one.

@amywike1196 3 ай бұрын

I use 1:1 and I always run out of both at the same time. It's supposed to be that way with 1:1. Took me a while to fully figure that out and I messed up a few pieces and have a couple bottles of part a still around.

@suerowe53 14 күн бұрын

Fantastic information and advice! Thanx xxx

@Made4YouResin 3 ай бұрын

Another great video Steve. Would be good if you could have the number in a darker colour so it can be seen better. So many people say resin not cured, it's bendy after a month etc I always say ratios or mixing were off but they argue it perfect not knowing cheaper cups have inaccurate measurements. Amines are another one the other day some women telling a newbie off saying it's the temperatures dropping causing the problem so buy a heat mat and it'll solve it 🤦

@vickicole2485 3 ай бұрын

Another great video Steve! My little boy (6) was very impressed with your mat! He was super excited when I showed him that I have it on my craft table!!!

@AuroraDragonDesigns 3 ай бұрын

I love the big wipes. Thank you for the tips. I laughed when you said 80 F was hot. Summer in Arizona averages 100 F or hotter. At least we don't have much humidity.

@brucehansen7949 13 күн бұрын

80 with high humidity is hotter than 100 with no humidity. Speaking from experience I went from Mississippi 90 degrees and 99% humidity I swear, to kuwait 140 degrees dry heat and it certainly only felt like a 10 degree increase not 50

@darylpepper2256 3 ай бұрын

Now I know what I was doing wrong with some of my crafting projects! Thank you so much for sharing. Always enjoy your videos and the time you take to share. Can’t wait to see your new crafting creative work space.

@ellenl5626 3 ай бұрын

I did my first resin project last night - but with the wrong product! I used Alumilite's Mold Maker instead of Casting Resin and now it's stuck in the mold. Is there a way to get it out like heat? I dug out the top layer and was wondering if a layer of Casting Resin over the residue would pull it out? Thanks in advance Steve 😍😍😍

@fairyspunfibers9098 3 ай бұрын

Oh, NOOOO! I'm afraid your mold is ruined, friend. Silicone bonds to silicone...beautifully. Oh, dear, I'm so sorry!

@ellenl5626 3 ай бұрын

Totally my fault and I learned my lesson the hard way!

@greenspiritarts Ай бұрын

Very helpful tips, thank you! I’ll use the torch only on the mold-less pours from now on! I am new to resin work and have found your channel to be the best for practical, efficiently explained information. I love all the experimentation too! Thank you! ❤

@user-re1xw7xj5u 3 ай бұрын

Hi Steve, watch all your videos, doing a great job. I'm just starting out and was wondering what your thoughts are about heat mats? Keep up the great work

@susanmitchell3516 3 ай бұрын

thanks that's helped me loads x

@dcruicks1 3 ай бұрын

Thanks Steve! Very helpful!

@lechatbotte. 3 ай бұрын

Excellent info Steve thank you

@suecampbell9821 3 ай бұрын

That's super helpful thank you 👌

@LisaVornhagen 3 ай бұрын

Thank you Steve!

@DianasCraftyCastle 3 ай бұрын

Thanks, Steve. Most helpful. 👍🏻

@Whispersintheshadows81 3 ай бұрын

This video helped me out a lot thank you

@trishlathanlathan-sy8in 3 ай бұрын

A little serendipity, I used mould material to make plugs to make holes in my projects. I used the silicone measuring cups to create them and they came out with the measurements on the sides. Now I know exactly how much resin I need to reduce to avoid overages.

@maryswartzel2773 3 ай бұрын

Thank you so much for all of the tips ! ♥️

@sirenofsound 2 ай бұрын

Thank you for another great video, Steve! You taught me everything I know about resin. It's always so good to have refreshers like this. 💚🧜‍♀️💜

@gerripeter484 3 ай бұрын

Good information thank you very much

@user-zz2wy3zo7q 3 ай бұрын

Great video thank you for the tips I leaned things I wasn’t aware of thank you for sharing ❤❤❤

@Jellybean_Craftz 3 ай бұрын

Brilliant advice… thank you 😊

@teresaburkart6978 3 ай бұрын

Thanks Steve. I do enjoy all the tips and tricks you so willingly share. Have a great week!

@reginashuback4552 3 ай бұрын

Great video, thank you for sharing!

@deborahcorreale352 3 ай бұрын

Love your tips and tricks

@BassResinator 3 ай бұрын

Great tips.

@Kreepykrafts 3 ай бұрын

Brilliant tips! Love the new Mat ❤

@resincreations 3 ай бұрын

Hi Steve, These are all great tips. Thank you for sharing ❤

@pattyharrison6386 3 ай бұрын

Steve, You can use those tattoos/ press on flowers. Stand the yellow one up portrait style & find a vase & flower arrangement that will go with it.

@WendyBurtenshaw-yl2hs 3 ай бұрын

Great tips Steve. Love your new kit

@leannemitchem8865 3 ай бұрын

Very informative video. I am learning so much. Thank you for sharing ❤

@bettinapauline 3 ай бұрын

I am so glad that you explained what things are. Sometimes people ise words ie fisheyes but I wasn’t sure what it was. Thank you

@maryrice8999 2 ай бұрын

Hi Steve! I recognize those ripples all too well... gel nail polish will do the same thing if it's too thick! Horrid mess to fix! I've done it once... ONCE with resin, backing a pendant... layered too thick, and BOOM... ripples all over it. Threw the piece out. Ripples and bubbles are evil...lol. I use my blow dryer on low heat and medium speed to help with bubbles. Thanks for all the info, and experiments! ❤

@patricialamson7944 3 ай бұрын

Great tips 💜

@carolynmozzone412 3 ай бұрын

Great advice 😀

@sallymonk4302 3 ай бұрын

By the way glad you are feeling better

@sallymccornack122 3 ай бұрын

Steve, great kit, but it’s always so disappointing when you go straight on and they haven’t got them with no indication of when they’ll be back in stock. Boo-hoo😢

@SILVERSTREAK925 3 ай бұрын

Thanks for the tips. I'm new at making resin crafts and I definitely have had issues with measuring equal parts even when I think the amounts are perfectly measured out. I was very disappointed in my outcomes so much I thought it was a waste of time to continue. Two years later, and after watching some of your videos, I've slowly been collecting more supplies to give it another go. Mainly need to get some pigments to mix color, additives and a heat mat but then I should be ready to give it another whirl. I'll have to check your link on the Teexpert set. Thanks for the great info.

@JoshuaCairns 3 ай бұрын

A spritz of Isopropyl alcohol (IPA), 91+%, can be used to decrease surface tension to pop bubbles. If the mold is spritzed with IPA before a pour, it can also prevent bubbles from forming along the face of the mold. It'll affect patterns differently than heat, so you might want to experiment with it. More tools for the resin toolbox.

@fairyspunfibers9098 3 ай бұрын

And NEVER use IPA if you're also working with alcohol inks to make blooms! Don't ask me how I know this...

@artistpw 2 ай бұрын

You can also get a scale that can change from ounces to gram measurements.

@nicholas87541 3 ай бұрын

Awesome tips! Would something like "silpoxy" help on a mold that has been melted to a resin piece so you can re use the mold? I know I've seen it used somewhere as a means of doing a bit of repair on molds, but I'm not sure if it would work if the mold was heated too much.

@fairyspunfibers9098 3 ай бұрын

Never heard of silpoxy! Need to go look that up...

@glitterBombBaby 3 ай бұрын

I loooooove my teexpert kit that you collaborated on. The mat surprised me. It's such a good size!

@Ladysmith925 3 ай бұрын

Great tips Steve! I need a Steve mat!

@carlycharlesworth1497 3 ай бұрын

Thanks for the good advice Steve. Do you think you will be able to use that fish eyed canvas for anything else? It seems such a waste to throw it away.

@craftylittlerthings 3 ай бұрын

Oh no their is no kits left on Amazon, I really neeeeed one lol I hope you do more pleeeeeaaaassseee Hugs xxx Ann xxx

@lisagoff2628 3 ай бұрын

I would love your new measuring resin kit but can't see the link you mentioned. Is it a members only offed?

@tedilockmiller7 3 ай бұрын

Love your tips and tricks. Could you recommend a good resin set?

@heidih.2465 3 ай бұрын

Great video! How do you know which bottle is the hardener? I use J Diction and they’re just labeled A and B

@fairyspunfibers9098 3 ай бұрын

@heidih.2465 I ran to look at my JDiction epoxy, and at first I couldn't find it, either! But, it's there! Look across the very top of the label on each bottle. In very thin, white lettering, Part A has: R / E / S / I / N Part B has, in thin, white lettering: H A R D E N E R Jyst FYI: ALL brands use this Industry Standard: Part A for the Epoxy (resin), and Part B for the Hardener.

@sallymonk4302 3 ай бұрын

Hi Steve been watching your advice & skills & enjoy them & am learning so much.I started with Teexpert but found I couldn’t buy it again on Amazon.Any thoughts? Also I want to do a very subtle marble effect on a Deep Pour clock,using quite a lot of resin.could I use a 3 divided cup to do this?

@katrinablakesley2864 Ай бұрын

☕️ time Steve 😁 maybe a cappuccino Love your work love K4ttt 👍🏽

@pearljenner3914 3 ай бұрын

Hi Steve any idea when the resin kit will be back in stock, Amazon uk? Says it’s currently unavailable

@PopArow4702 3 ай бұрын

got the same set of measuring cups along with a set from jdiction and lets resin also have a thermometer and hydr indoor and outdoor so i can keep my work room around 70F is that a good room temp?

@fairyspunfibers9098 3 ай бұрын

I wouldn't go ANY cooler, nor any warmer than 74-75°F. I seem to have the best luck with that temp range.

@jamesbarlowjr.3762 3 ай бұрын

I have a digital scale that I measure with. Lol my eyes aren’t the best to go by the measuring cups.

@yanapritchard4797 3 ай бұрын

Used your link and Amazon says dont know when they will be available in the UK.

@susanbrocksmith4255 3 ай бұрын

What about a heat mat or one of those de bubbler chamber?

@invisiblue3212 3 ай бұрын

The vacuum chambers are great for pots of resin but lousy for poured molds. Its almost impossible to pick up a poured mold and move it successfully, not to mention the resin 'swells' while its degassing and would ruin your mold and chamber. Hence the lighter or heat gun. I hope that helps!🌞👍

@tamiecarlile 3 ай бұрын

Can your silicone mixture packs get to Australia 🇦🇺?

@stevesgirl17 25 күн бұрын

Hi Steve, when will your toolkits be available again? I really want one lol

@dawngreen5772 Ай бұрын

Hi Steve. Are you based in the UK? If you are, how did you get that measuring jug set with your name on it? I went onto their website and despite it saying that they ship worldwide, when I got to the checkout it said they didn't ship to the UK 😢😢😢😢

@thepenelopejones 3 ай бұрын

*Guilty* on several levels Steve 🤡🤣 Well it's always GOOD to be reminded to "smarten" up and look for the right burner rather than grabbing the nearest and handiest!! Super upload and details. Much appreciated

@hellobrklynheyLA 3 ай бұрын

I’ve been using the plastic cups to mix resin to make ring holders and find that the bottom of my ring holders always look cloudy (if I wipe it with alcohol its clear but goes back to cloudy so I know its the outside). Could this be because of improper measurements from the cups?? Or is there another reason? Im using T-Expert or Lets Resin brands so I know Im using quality resin.

@fairyspunfibers9098 3 ай бұрын

Hmmm. Sometimes, a spritz of alcohol can mess up the surface of resin, but that doesn't sound like what you doing? Very possible that either your room is too cool, or far too humid.

@janetsinnott737 3 ай бұрын

Do you use a heat pad at all to cure your projects? I’m having a lot of trouble and a lot of ruined makes. I use the heat pad on medium, one project looked amazing, put it on heat mat, covered it with the hood and when I went to get what I thought would be a great cured piece, the resin had cured but it had all separated in the mould, other pieces have warped in the mould during curing process, so frustrating and expensive! I find low heat is too low and I don’t like using the high heat. Help Steve 🙏

@invisiblue3212 3 ай бұрын

Hi there👋 Im fairly new to resin, but is it possible that you're rushing the cure time with too much heat? If the outer resin cures too quickly it will warp once the inner resin cures. Have you tried leaving them to cure at room temp for 48 hours? On humid days it takes my projects a few hours longer to set, just wondering if maybe they just needed more time. It may also be as he stars in the video that if the amounts of a and b are even the slightest bit off it affects the final result and curability. I hope you find your answers!🌞👍

@janetsinnott737 3 ай бұрын

@@invisiblue3212 I did wonder, but see other KZfaqrs using the heat pads too….that’s why I bought one. On most things they cure brilliantly on the heat pad, but the past few items have failed mainly by warping. Thank you for your reply and help though.

@invisiblue3212 3 ай бұрын

@@janetsinnott737 sure thing👍🌞 Have a great day!

@janetsinnott737 3 ай бұрын

@@invisiblue3212 and you 👍

@cozker23 3 ай бұрын

When will the resin starter kit be back in stock please?

@cozker23 3 ай бұрын

U.K.

@SteveMcDonaldArtsandCrafts 3 ай бұрын

I will check it out next week

@suzannemallon946 2 ай бұрын

Not true my friend! If your mold is stuck, warm it slightly and slowly with a hairdryer or small heat gun, right at the point where it's stuck. Then slowly peel the mold away from the resin piece! Works every time! I've also heard you can use alcohol to make the mold release from the piece! Good luck and I enjoyed the video👍

@patricialamson7944 3 ай бұрын

Hi Steve💜. How is the move going??

@SteveMcDonaldArtsandCrafts 3 ай бұрын

Nearly sorted now thanks. 😀

@klairbaranek 3 ай бұрын

Can you use a resiner’s heat gun to make sure that there are no bubbles?

@fairyspunfibers9098 3 ай бұрын

You can if its used on the coolest setting, and NOT TOO LONG!

@klairbaranek 3 ай бұрын

@@fairyspunfibers9098 I will make sure that it is on the lowest setting

@Luvpig 3 ай бұрын

❤

@Grumpycat0405 3 ай бұрын

Its better to use a scale

@susanbrocksmith4255 3 ай бұрын

I’m scared to try resin even though I have all the ingredients. Concerned about fumes/irritation throughout my home

@invisiblue3212 3 ай бұрын

Only work in a well ventilated area! I have asthma and am easily triggered by fumes and smoke. I have a large box fan in my window set to exhaust outward and my resin table sits in front of it. I also have my ceiling fan set to push air down, on low setting, so the fumes dont rise up and float around. I also wearing an N95 regular mask and mix at arms length towards the fan. Haven't had any issues with fumes leaving the room or irritating my eyes, lungs, etc. I have an elderly relative with chronic breathing issues and they haven't been affected at all. I hope this helps you feel a bit braver!🌞👍

@susanbrocksmith4255 3 ай бұрын

@@invisiblue3212 thank you! That helps a lot because my 92 yr old mother lives with me

@invisiblue3212 3 ай бұрын

@@susanbrocksmith4255 You're welcome! Get crafting, babe! Its so much fun!! Even the mess ups!🤭😁

@fairyspunfibers9098 3 ай бұрын

@invisiblue3212 N95 does NOT filter fumes, only fine particles!

@invisiblue3212 3 ай бұрын

@@fairyspunfibers9098 I didn't say it filtered fumes😶 I said I wear one. I didn't specify why.