Stop the Smoke, Do THIS to Your Fire Pit

Рет қаралды 7,716,845

Жыл бұрын

How to build a DIY smokeless fire pit just like a solo stove. Stop the smoke in your backyard fire pit with these tips.
Sponsored by WD40 Brand - Get Trigger Spray and more at bit.ly/3pUPHzu
🎥 What to Watch Next:
Easy DIY Fire Pit - • Building Your Perfect ...
Easy DIY Retaining Wall - • Level Up Your Garden B...
DIY Raised Garden Bed with Paver Edging - • How to Make a Raised G...
How to Restain a Deck - • How to Stain a Deck th...
➤Tools/Supplies Used (affiliate):
🟡 WD40 Trigger Pro - bit.ly/3pUPHzu
30” Segmented Fire Ring (one I used in end) - geni.us/wk61xu
28.5” Segmented Fire Ring - geni.us/dKgOfLM
1-½” Metal Hole Saw - geni.us/b0i0pdU
1” Metal Hole Saw - geni.us/FSSAj1
Metal Bit Set - geni.us/A9xql
Tumbled Wall Block - bit.ly/3vNtYNQ
7 cu/ft Gorilla Cart - bit.ly/2RzBMBp
4’ Level - bit.ly/2RC13Lj
ISOtunes Bluetooth Hearing Protection - bit.ly/2Ru4Es8 (10% off code: FTBT)
➤Plans from this build:
Modular Garage Cabinets bundle (Save 30%) - fixthisbuildthat.com/garageca...
➤Join the Builders Club!!! bit.ly/2abkaSV
More content, early access, FREE plans, video credits
➤Support the FTBT Channel:
Buy FTBT Woodworking Plans: fixthisbuildthat.com/plans
Buy FTBT Merch: fixthisbuildthat.com/merch
Links to My Tools & Gear: bit.ly/FTBT-tools
Subscribe: bit.ly/FTBT-youtube
➤Thank you to these partners for supporting my channel. Go check them out!
Kreg Tool: amzn.to/2FXZIGp
ISOtunes: bit.ly/2Ru4Es8 (10% off code: FTBT)
TimberlandPRO: bit.ly/2Zm1r1n
➤FOLLOW ME on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. ibuildthat
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht
➤Referenced people/videos:
Haxman Smokeless Fire Pit - • The DIY Smokeless Fire...
Break It Yourself Solo Stove Review - • UPDATED Design | Solo ...
Solo Stove on KZfaq - / solostove
Build a DIY smokeless fire pit in your backyard to get a massive smoke reduction in your fire pit. This is a great upgrade for any diy fire pit!
Music Licensed through Epidemic Sound - Get a FREE month: bit.ly/3qCwWiW

Пікірлер: 2 700

@JCWren Жыл бұрын

“Build a man a fire, and he'll be warm for a day. Set a man on fire, and he'll be warm for the rest of his life.” -- Terry Pratchett, from Jingo.

@marvingeorge8856 Жыл бұрын

This is so deep. I'm in tears of virtue

@hillernius666 Жыл бұрын

I loved to read terry pratchetts books for years. May he rest in peace

@BadWeatherfreak Жыл бұрын

Lol

@fannarkaribergvinsson2917 Жыл бұрын

I actually loled 😂

@elenasunshine Жыл бұрын

I thought if you set a man on fire, for sure he would die. 😆

@SmokinOak Жыл бұрын

I like the fact that he didn't edit out the mistakes he made and what didn't work in order to demonstrate how the various changes effect the outcomes. Great video!

@pearlberry---PearlyGates Жыл бұрын

Absolutely that way if the next person thinks that what he did is the best way they can see that it's not and it'll save them time and headaches. They say that failures are steps toward success.

@t.c.2776 Жыл бұрын

Why wouldn't he... you people were paying him to experiment... it cost him nothing and he probably made thousands above what it cost him... not to mention he had a sponsor paying him...

@SmokinOak Жыл бұрын

@@t.c.2776 I suppose for the same reason 9/10 youtubers edit out any flubs, mistakes, bloopers, mishaps, and anything else that may not project a polished and professional appearance to their audience.

@meyogy2414 Ай бұрын

He did build a bigger fire at the end to get more heat into the system. Did it have less smoke when it was a smaller fire with the dry wood?

@grimsnig 7 ай бұрын

I love how you don't interrupt your video with commercials ...awesome info too

@Icedel777 2 ай бұрын

I appreciate you doing all of the homework and expenses. Saving me time and money. I'm a single dad, and I enjoy doing little things like this with my daughter to show her love. Burning firewood and hugging my little one is so great. Every dollar counts, so thanks again.

@JDubyafoto Жыл бұрын

I'm thinking the only thing you could have done that would improve the performance of your fire pit is more depth. The Solo stoves are much smaller in diameter than your fire pit and they are taller in height. That gives much more space for the air to really heat up as it rises from the bottom to the top of the air channel. Great video! I know I learned a lot by watching it.

@Fixthisbuildthat Жыл бұрын

thanks! definitely would be better taller

@dwaneanderson8039 Жыл бұрын

A taller, narrower pit also concentrates the heat more. You want maximum heat and oxygen to maximize combustion.

@coollninja Жыл бұрын

@@Fixthisbuildthat As a mason if you didnt get the fire clay or at least fire mortar that quick set is going to crack with higher heats

@grotevin Жыл бұрын

Yes, and the fire needs to be big enough to really heat the wall of the fire pit. This makes it so the air gets proper flow and is superheated so it really combusts the smoke. I own a solo stove and it works really great, as long as you keep it properly fed. When it's really hot it burns green wood mixed in without any smoke.

@harveyscottz Жыл бұрын

@@Fixthisbuildthat or deeper. It doesn't have to be taller 💁‍♂️

@DhavalPateldp Жыл бұрын

Just had to say one of the best integration of a sponsor and not taking the whole frame of the video and giving us continued progress of the project at the same time! 👏👏👏

@scottvriethoff6633 Жыл бұрын

Wow! I have zero intentions of doing this to my fire pit. I don’t even know how this video found me. But, I certainly appreciate the amount of time, money, and work you put into this video. You’ve earned a like. Great job 👏

@edithbannerman4 4 ай бұрын

@Hello there, how are you doing this blessed day?

@hollowillow 9 ай бұрын

Came for the DIY ideas, stayed for the experimenting! It was so entertaining to watch all of the thought process going behind it

@KiltedSatyr Жыл бұрын

0:27 fun fact! (Assuming you don't say it later) the reason smoke seems to always be blowing into your face is because of convection. With nothing obstructing the air's movement toward the fire(and no wind) the smoke will rise straight up. BUT! since there is often a person or group of people somewhat clumped together around the fire, the air that would come from behind them is slowed meaning the air on the other side of the fire that isn't slowed will assert more force bending the convection current and thus the smoke towards the people blocking the air. Of course with the wind blowing the smoke will follow the wind but still be affect by the convection

@ConfusedRaccoon Жыл бұрын

Came here to say just this.

@medianoche3 Жыл бұрын

Comments like these are why I always peruse the comments section of videos. 10/10 solid fun fact.

@enigmatum100 Жыл бұрын

This is why I often add a large, flat vertical stone on the far side of a campfile fire. However it doesn't aways work, because smoke following people is based on the universal law of attraction... whatever you fear will come :)

@100pyatt Жыл бұрын

Physics 👍👍💯

@nohandsman8475 Жыл бұрын

Yes was going to say this. The reason it seems like the smoke follows you is because it does. For the reason you mentioned

@jpsmith2329 Жыл бұрын

I really appreciate the “I’m not going to give up no matter how long it takes” attitude in this video.😂

@robertmosier6028 Жыл бұрын

Tip for calculating the airflow: Measure your 4 gaps in the bricks. That's the surface area of the inflow. Ideally the outflow should be similar in size to the inflow, or slightly larger. Number of holes * pi * diameter is the surface area of the exhaust. Compare the two numbers and then adjust the hole size (or number of holes) until the inflow area matches the outflow.

@PBTophie Жыл бұрын

Would you want the airflow to be the same between the top and bottom? Would it not eventually choke the fire if the bottom weren't receiving more air to feed it? Or would the heat of the fire just naturally pull in more air from the bottom regardless; provided the holes weren't smaller and/or less numerous than the top holes.

@brucechristensen 10 ай бұрын

Surface area of the exhaust = (number of holes) ⋅ π (diameter / 2)² (Number of holes) ⋅ π ⋅ diameter would give you the total circumference of all of the holes, not the total area.

@Philitron128 10 ай бұрын

@@flennboyd6413Probably Automotive Engineering or Furnace tech/engineer. There's a big world out there man, lots of really cool things that people do.

@east5871 10 ай бұрын

@@flennboyd6413 pyromaniac! 😂

@kyoteecasey 9 ай бұрын

@@Philitron128 probs not as his math ain't right tho. There's also thermal expansion to consider if the air is heating up

@pinchebruha405 Жыл бұрын

I love when there are smart knowledgeable comments, thanks everyone I am getting my degree in life from y’all!

@annburge291 Жыл бұрын

Really liked your pit design. There is another way to have a less smokey fire. You don't construct a tipi. Instead you pack in tightly the logs at the bottom. You add smaller pieces and at the top you construct the twig, pinecone, dried orange peel pile. One lights the top, not the bottom. The fire burns gradually downwards but having the fire at the top means it burns the gases coming out of the gradually heated logs. Much less smoke and significantly more heat.

@Fixthisbuildthat Жыл бұрын

that sounds like a cool idea, definitely going to try that!

@kemuntojayne8656 Жыл бұрын

Crypto investing has brought me great success!!! Irrespective of the economic depression I can boast of over $12,000 dollars every week on my investment. All thanks to Mr Richard…Thank you for your focus on quality stocks.

@captainblue2344 Жыл бұрын

Known as the Council fire. Boy Scout style. Works great.

@wyominghome4857 3 ай бұрын

Interesting! Can you build your fire this same way in an indoor fireplace? Less smoke and more heat is good there too.

@barrywise7185 Жыл бұрын

Dang dude, you put so much work into this video. Thanks for satisfying everyone’s curiosity

@dalehood1846 Жыл бұрын

EXTREMELY THOROUGH!!!!!!!

@layadhaya 4 ай бұрын

This guy is brilliant! How beautifully he explained the various tests he conducted! He was so determined to achieve the objective of building a smokeless fire pit, and he finally met the objective!

@ChrisFuhrman-df6iz Жыл бұрын

Loved this, I have a Solo fire and it does smoke to begin with even with dry logs. You also get a better secondary burn with a full fire across the width (rather than a tall fire) as the air passing along the side to come up through the holes is heated more... Great job!

@AustinLWright Жыл бұрын

Great video. But having owned several Solo Stoves, the most important factor in the intensity of smoke is the dryness of the wood.

@brentfarvors192 Жыл бұрын

That, and the speed/direction of the WIND...This doesn't work...

@ryanesau8147 Жыл бұрын

Actually the solution is a three quarter size burn barrel, with a lid ( that opens) and a pipe that has a flue… perfectly distributed heat, no smoke whatsoever .much better heat source ..use it in backyard for gatherings and at hunt camps

@kylehill9653 Жыл бұрын

@@brentfarvors192 its too wide to properly work, the air needs to get hotter so it will rise above the smoke, taller narrower versions do actually work to some degree

@TimSailer Жыл бұрын

Meh... do a search for 'dakota fire hole' or 'dakota fire pit'. I've been building low-smoke fires most of my adult life without anything special. You just have to watch the wind direction. Air feed is the key along with a hot fire.

@johnsmithfakename8422 Жыл бұрын

There is one detail about fire pits that people keep forgetting. If the fuel (firewood) is higher than the secondary holes, the secondary burn will become a primary burn for said wood and thus produce smoke. If you want to keep your current system then do not build the fire higher than the secondary holes (maybe an inch shorter). If you are going to mod the system, add a 4th layer of stones and keep the firewood below the holes.

@louish.9414 Жыл бұрын

So stack four high

@zitriphyer8429 Жыл бұрын

Yes, very true. Still worked very well despite, but yeah, that would improve it even more

@erikziak1249 Жыл бұрын

Also, he should put some pipes or whatever for the air to have access to the center of the flame, not just its outside.

@InYoPie Жыл бұрын

Pretty sure it would be exponentially better if you placed a another layer of stones on top of the steel liner to add as a "ledge" so that the top opening is a little tapered.

@danmoretti8898 Жыл бұрын

Hm probably true, just like the solo stove

@ReeferCheifer13 Жыл бұрын

He’s onto something here. By narrowing the top of the fire pit, you will achieve what is known as the Bernoulli effect. A greater force of air thrusting through the whole system, and theoretically more fweefwee

@CharlesThomas-xv2yn Жыл бұрын

Can you answer in more detail?

@AJ-jy6lb Жыл бұрын

@@CharlesThomas-xv2yn - Yes i can answer, but please, stop calling me "in more detail" :oP

@xSKOOBSx Жыл бұрын

I think the next step in efficiency would be to add spiraling channels around the outside so that the air in the walls of the fire pit can't just go straight up, but has to go at like a 45 degree angle around the outside, increasing the time it spends in the wall and therefore the time it spends heating up. This would likely result in a secondary burn happening sooner after starting the fire, and a more complete secondary burn due to potentially increased velocity.

@bawfuls 10 ай бұрын

Another feature to help secondary burn might be to add a lip above the top holes, as is seen on the retail fire pit design he's imitating. This would force the air exiting the top holes towards the fire a bit before it can rise above the firepit, along with adding some radiative insulation to that region to help keep temps up and maintain the secondary burn

@robertpenn2152 Жыл бұрын

Awesome video Brad! I always think of your videos from the perspective of your neighbors and it makes me laugh. “Honey, looks like Brad is lighting the 47th fire of the past 24 hours, let’s see what happens with this one!” 😂

@Fixthisbuildthat Жыл бұрын

😂 😂 OH yeah, they definitely get a show

@gooeytarballs Жыл бұрын

I think your Math's off a bit. In 24 hours we would not have but twelve or so of 'daylight' and fewer of the sort of light seen in the video clips. Lets say, ten hours or 600 minutes MAX. Allowing for time to load the pit, start each fire and get a respectable burn going would consume not less than ten minutes per instance (in a dream world perhaps), leaving but 130 minutes for the forty-seven video clips or 2.7 minutes per clip. The first fire and smoke (edited) clip ran a minute twenty plus with several obvious cuts/clips cobbled together along with some quite rapid talking. Let us assume it took significantly longer that 2.7 minutes to film that first clip. Now, between takes, we need to cool the pit down to remove the ash and such and reassemble things, add combustibles, ignite, etc. Then there is all the work to perforate the ring - not starting fires then, was he? Not sure where he lives in TN, but outside of town with a few acres, folks don't pay much attention to their neighbors - esp if they have Cable and Internet and a place to take care of or a job in town.

@ImYoutubing247 Жыл бұрын

@@gooeytarballs you must be fun at parties…

@Mr_Raruu1 Жыл бұрын

@@ImYoutubing247 😂👍

@djdrewthomas Жыл бұрын

@@ImYoutubing247 29.4% of party guests especially enjoy the first 13.7 minutes of the party. 😁 lol

@SirBenJamin_ Жыл бұрын

Great video. It would have been good to see the unmodified original version with the same dry wood you used at the end. As I feel like that's what actually made the difference

@nathandettweiler9560 Жыл бұрын

It was a good video and I learned some ideas, but iam also thinking the dry wood is what the key factor was !

@----ian Ай бұрын

Yes, correct me if I'm wrong, but nothing seemed to work until the fuel type and amount changed. So the conclusion should be: don't change the pit, just dry the wood and add more. I like the attempt to engineer the pit though, and I'll probably do something similar because it's cool :)

@missingaria2503 Жыл бұрын

I like that you did your troubleshooting on camera so we could see the how and why in a way that's actually helpful to folks who don't build often/have tons of money to try over and over again.

@SavageDraco Жыл бұрын

I'm usually not huge fan of these videos but you by far have a great presentation that would actually help people that have very little experience making things. If want I'd give few simple ideas to maybe make that an easier set up work better or you might take the things I do make them better. I just been working way to many hours and really just learning the video stuff

@bumboclat Жыл бұрын

What you tried to build is a gasifier stove. However, that design relies on two things: small enough diameter to heat up the walls, making the secondary air rise up by draft, and small enough diameter to deliver that air into the flames. It's not really well suited for a large but flat firepit, but kinda works if you make the fire crazy big, as seen.

@RaspK Жыл бұрын

I'd argue that one thing the pit would benefit from would be for the bottom airflow to come out from _under the logs._ In the current iteration, it just tries to get to the flames from the sides, which is better than trying to enter from the top, but you still get convection pushing most of it upwards, rather than allowing it to get near the actual fuel and thereby replenishing the oxygen levels more effectively.

@kathybramley5609 Жыл бұрын

Yeah, I was just writing about diameter/height ratio - and drainage: seems likely to collect water when it rains, and moss and a little ecosystem! The DIY double skin drum I saw on here before I saw the solo stove advertising everywhere - that had legs built from the base of the drum. Rocket stoves have built in thermal mass and, like, hardcore substance - as do pizza ovens. Which is kinda what you want in a garden feature. Even though the solo stove looks very futuristic, it's not everyone's vibe and it probably dents and tarnishes as much anything else. And a drum is already a relaxed & utilitarian DIY vibe. Not pretty.

@CryptoBear Жыл бұрын

Nice! We can’t wait to see your video🎉

@amaruonyx390 Жыл бұрын

I came to the same conclusion with no knowledge about fire pits, and only the information he provided.

@satyris410 Жыл бұрын

This is what I came down here to say. In fact, everyone seems to be saying the same thing

@vmr6771 Жыл бұрын

I believe the main reason it took so long was due to the size of the pit. The ring needs to be hot enough and the flame needs to be near the gas plume to ignite.

@court2379 Жыл бұрын

The smoke (carbon) needs to burn and needs to be very hot to do so. He had to get a good bed of coals that covered the whole ring and keep a larger fire to get hot enough. If he put a ring on top that narrowed the opening like the commercial units it would be easier to get to temperature. It pushes the heated gases together to address potential cold spots in the flow and reflects much of the heat back inside. Also notice they used stainless steel. Those temperatures will corrode the ring and cover out relatively quickly with regular steel or cast iron.

@Alessandro1983 Жыл бұрын

Don't know where I'd be without KZfaq tutorials. I appreciate the time spent teaching us this

@adam_loooong1735 Жыл бұрын

Brad, your relentlessness toward seeing a job through to the and and your relentlessness in maintaining a great attitude is one of the most inspiring things about you and this channel. It is easy to see it is not a show for the video - it is authentically you. Thank you for all you do and the videos you make - this is truly one of my favorite channels in the maker space. Keep up the great work man!

@Fixthisbuildthat Жыл бұрын

thank you, Adam. Appreciate the support!

@BadCook77 Жыл бұрын

Took the words out of my mouth. The effort you put in to this is amazing. Great video!

@mattheworoark1459 Жыл бұрын

@@Fixthisbuildthat Hey Brad, I’m totally high jacking this comment just to ask you a question. In one of your videos I heard you live in the Nashville area. If this is correct, I was wondering if you could help me out. I’m wanting to build a “big girl bed” for my soon to be 3 year old daughter. I don’t have a workshop and am looking for an easy way to build this twin bed. Reply back and let me know if there’s a possibility you could help.

@checho575 Жыл бұрын

... you have a fire in front of you. Why use a lighter😂

@randygreen007 Ай бұрын

He probably read the instructions.

@GT1Vette 21 күн бұрын

LMAO

@KPVFarmer Ай бұрын

Fun video. I like how you showed the basics for the build but cut out the fluff yet still showing each of the different tests without just cutting to the finished result. Excellent!

@keeblin 7 ай бұрын

Thanks for making this. I used your first video to build my firepit recently and it's producing way too much smoke so will definitely be giving this a go!

@chrisdunfield513 Жыл бұрын

One suggestion I would make to reduce smoke, indoors or out, is to build an "upside down" fire. Put the biggest pieces on the grate, on the bottom, then the next smaller, at a right angle to the biggest ones. Keep alternating layers, leaving some space between the pieces for air, then put newspaper and small kindling on TOP, NOT on the bottom. You may have to feed a bit more small kindling at first, but not for long. You will be amazed at how much cleaner, quicker and hotter the "upside down" fire will burn. Each layer heats the layer below as the fire goes DOWN (trust me, it will, even though fire generally does go up), so each successive layer burns readily, and there is hardly any smoke. When you make a fire the usual way, the bigger wood on top isn't hot or dry enough, so there is quite a bit of smoke until the big pieces get going. Once the "upside down" fire gets down to the bottom layer, you just feed it more wood on top as usual. If you try this method once, you'll never go back.

@bumbygrl Жыл бұрын

I'm going to try this out. Burned my first fire of the season tonight.

@thack2502 Жыл бұрын

I agree, this man knows what he is talking about

@cjsutterer4804 Жыл бұрын

We always do the stacked cabin type fire with the newspaper or kindling underneath the “roof”. I’m going to try this way next. I’ve actually never heard of it before.

@blairzettl3933 Жыл бұрын

In most cases this will not work. Heat rises. Ashes smother flame. If you need to get a fire going use log cabin or teepee style. Some genius taught this method to our kids for 'winter survival'. Apparently cold branches won't burn this way. Everyone had to eat cold weinies.😥🍖🥶

@VitaKet Жыл бұрын

@@blairzettl3933 Upside down is THE way if you have a wood stove/fireplace, not so much an outdoor fire.

@scottchristie Жыл бұрын

Great video. However, the part that's missing is the ratio of stove height to diameter. There a powerful convective element with this process you just aren't going to get with such a wide and shallow fire-pit. The point is to increase the secondary burn which takes place at the top of the fire. In your stove the top of the fire (flames and smoke) is already outside of the fire-pit. It's just NEVER going to work like that. You pit needs to be 2 or 3 times higher for that diameter. Notice on the patent how the top is tigher than the rest of the pit and the ratio of heigh-to-width. The secondary combustion has to take place BELOW the top surface of the stove. Dry wood for the final tests but wet wood for the preliminary is also quite misleading. A lot of people will fail following this advice.

@thegolfnut812 Жыл бұрын

You brought up a point that I was thinking. The idea that he is copying does have a higher ratio, meaning the fire pit should be taller. Everything else about this is good and I think I'll build one of these.

@KevsGuide Жыл бұрын

correct to get the chimney effect

@JonSadler Жыл бұрын

Like you said. He used dry wood at the end vs wet at the start. Cheating somewhat

@TRKVSports 11 ай бұрын

At first I was ready to rip out my stainless steel insert on my garden BBQ (we don't call it a fire pit) and spend a Saturday in May drilling 2500 holes...thanks to this post I'll save the effort...title of the video should be wet wood is great for smoking

@lovethosebudgies66 7 күн бұрын

Loved this video, though it's way too complicated for me. It's very interesting to watch and I appreciate all the effort you put into this.

@teachoc9482 Ай бұрын

I really like how you incorporated the commercial part for WD40 with your "action montage".

@russwatson8713 Жыл бұрын

It would be interesting to have done a control burn using dry wood before drilling the fire ring holes. This would show how much of the improvement in smoke reduction was due to the modification of the fire ring and how much was due to the drier wood. Great video otherwise. Very easy to understand. Will use your tactics when I build my next fire pit.

@christopherpavlicas 11 ай бұрын

What is most important is to keep the wood consistent (the same wood) from burn to burn in order to make the best comparison.

@fenixphire84 7 ай бұрын

I agree cuz I was like so just use dry wood then?

@jennifertharp659 Жыл бұрын

This is a really fun experiment! I enjoyed your explanations for why you were doing each step and that tape trick for the drilling stage is a keeper!

@bug5654 Жыл бұрын

14:24 "Alright, yesterday's fire was pretty good, but I think we can do better." The true inspiration of the first sciences.

@bradwilliams4919 9 ай бұрын

A lot of time and effort to make this video! A BIG THANK YOU! Had a fire pit at our summer home and always wanted to figure this out. You did it. Great personality!

@edithbannerman4 4 ай бұрын

@Hello there, how are you doing this blessed day?

@trevorfields5216 Жыл бұрын

Great video! I liked it! Here's what you missed when you looked at the patent for the solo stove. The secret of why it generates almost no smoke isn't to do with the size or number of holes in the top/bottom. That is a factor though. The biggest factor is to look at the ratio of the height of the pit to the circumference. Basically, the solo stove is skinnier and taller. With a pit of this diameter, you'd have better performance by building the height of the pit upwards. This increases the effective space of that insulating layer, providing more area for smoke and gasses to slow, cool, get trapped.

@qw2ps4 Жыл бұрын

Or you can use an old washer tub....

@EGGINFOOLS Жыл бұрын

I agree. Also he should taper the top a bit too

@VideoconferencingUSA Жыл бұрын

Also, the solo stove has holes under the burn area too.

@semaj262 Жыл бұрын

When wood gets hot enough in a low oxygen environment, it produces wood gas, which is flammable. Combustion needs oxygen, so you see fire "shooting out" of the vents, which is actually the boundry of wood gas and oxygen mixing and burning. Gas burners have this same boundry flame, but inverted, with a stream of flammable gas into an area of oxygen. Fun fact, the fire we see is mostly comprised of incandescent soot, material that gets so hot it glows like a lightbulb or forge metal.

@Fixthisbuildthat Жыл бұрын

wood gas...I like that 👍

@JayDee-xj9lu Жыл бұрын

So it's true that wood doesn't burn. It gets hot and produces flammable gas. If you look very close to wood burning there is a slight gap between the wood and the flame.

@Derf1313 Жыл бұрын

Correct, if you're seeing flames out of the top holes, it has to be wood gas being drawn into the lower holes, & mixing with the air to then be ignited as it exits, looking like the burner you talked about. Just air coming out wouldn't really do anything... My woodstove has secondary burning, but the flue comes outta the middle of the firebox (damper can be slid open to load wood, so it exits the stove by flue not door, lol)

@iscrewedthatup Жыл бұрын

Oh my gosh! I just figured out my love language is smokeless fire! Thanks so much for your attention to detail and showing your process, can't wait to try this on my fire pit that came with my house!

@DharmeshPatel-rz3hd Жыл бұрын

Hats off to you. You did lots of effort to prove your point. 👌🏿

@fromika Жыл бұрын

and the point is that dry wood works much better :)

@TheEnergyball Жыл бұрын

I love the excitement and genuine pursuit in the experimentation! I learned something to improve my fire pit and enjoyed the presentation. Thank you!

@gpack28 Жыл бұрын

Seeing how the air travels by using the smoke pellets was cool to see and helpful to see what size hole works best. I’m making a smokeless pit right now and this was very helpful. Thanks!

@ryanranocchini 26 күн бұрын

I used a double walled stainless steel washing machine tub to make a fire pit in 2008 and it worked just like this. it was incredible. Wish I'd realized what I created and commercialized it....

@2nd-place Жыл бұрын

My smokeless fire pit (the cheaper Tiki brand) is one of my favorite things I’ve ever bought.

@pmdinaz Жыл бұрын

Brad, the best part was you used the lighter, when the fire was already going. I love it man. Seriously. it shows we're purpose driven humans...I have a need..I have a tool..I'll use the tool. Haha Nice video!

@cottagemail4066 Жыл бұрын

I've watched all of these hoping that someone will get to where they "somewhat" match the commercial available ones. This is getting it a step closer! I think, and I could be way off, that possibly these DIY self attempts are not matching the height/width ratio of the commercial ones. Being so much wider, I wonder if the air going up the sidewalls doesn't have enough time to heat up. You need a much "wider" fire to heat the sides, and the air traveling up the sides is so short. *** BIG CREDIT goes out to all those trying.

@Fixthisbuildthat Жыл бұрын

yes, 100%. I don't think I'll ever get the consistent secondary flames on this design because it's so short. The air doesn't have enough time to get superheated consistently. A taller smaller version would be much better to achieve that

@davids2530 Жыл бұрын

Next project - bury a smokeless barrel system!

@AttentionDivision Жыл бұрын

@@Fixthisbuildthat I don’t think your fire pit is too short. It’s too wide. Over the years my family has owned a solo stove and two breeo fire pits. We’ve learned that smaller diameter fire pits make it easier to produce a smokeless fire, and they consume way less wood. Consider fabricating a wider top ring that reduces the inside diameter of the opening and covers the upper vent holes, protecting them from wind Lastly, spreading coals closer to the walls and adding logs to the perimeter reduces excessive smoke much faster than keeping your fire centered Great work! This is one of the best DIY smokeless fire videos I’ve seen

@randombytes3998 Жыл бұрын

I think that having the same air source for the primary and the secondary burn is an additional 'mistake." You want the secondary burn air to heat up and exit the top holes with pressure. Having the primary air come from the same flow reduces that pressure. Notice how the patent separates the airflow much more distinctly.

@matthewlabadie9614 Жыл бұрын

Everyone saying it needs to be taller or skinnier is alluding to the fact that there is an optimal way to make this fire most efficient AKA not have any smoke. You are right, but the patent exists for a reason, there is much more thought/calculations and actual enhineering going on behind the scenes that would take more than just winging it with random materials. There is a lot of thermodynamics and heat transfer going on here that isnt as simple as “just make it tall and skinny” because there is obviously a sweet spot on both those constraints.

@danimalx23 Жыл бұрын

The information you share when you make mistakes along the way and work through them is 100% the most valuable part of this video :D

@LISASTAUBIN-bd1mg 22 күн бұрын

Wow! This video was TONS of work! Props!

@ZsOtherBrother Жыл бұрын

Aside from comparing wet wood "before" to dry wood "after", this is not a bad video. Keep building awesome stuff :)

@JohnMcNerney Жыл бұрын

Exactly.The real demonstration here was on the importance of burning properly dried wood.

@stipcrane Жыл бұрын

Probably could've saved 6 hours of work by switching to dry wood. I burned very old and dry oak flooring last night in an open pit and it was smokeless.

@mikeweckesser4450 Жыл бұрын

the smoke is always in your face because the smoke will travel towards the tallest things around the pit. Think of it as smoke traveling up a wall. At one end of my pit I have a tall rock (almost 4ft at the peak) I am not sure the science behind it but this makes the smoke always migrate towards it and then up the rock and up. Just something to think about. great build as usual.

@seanwaite7248 Жыл бұрын

Air rises over the fire, pulling outside air towards it. You block that inflow, so rather than it flowing in to the fire it can get pushed out towards you

@tslee8236 Жыл бұрын

Yeah, flue effect sucks the air through air speed differential.

@JJ-te6tx Жыл бұрын

No your body acts like an air dam. It blocks air from getting to the fire . What creates a vacuum and the fire smoke moves towards you. The more people that sit around you the bigger the vacuum. So sit alone and the smoke will not bother you.

@ZacLowing Жыл бұрын

I would hang a lantern there. lol

@hawjfamily321 21 күн бұрын

Your editing is awesome. Such detail.

@TinManOutdoors Жыл бұрын

Wow, this is EXACTLY what I was looking for!!! Great video, thanks a bunch!!! Oh, and also, keep the flame going at all times, it helps burn up the smoke!😊

@rexstuff4655 Жыл бұрын

Or, more likely, your original fire was simply too small for the size (and wetness) of the wood you were using. You'll note that in the 'after', the fire is substantially larger than the 'before'.

@BarriosGroupie Жыл бұрын

Yes, the stacking of the wood has more of an influence on the smoke compared to the fire pit's design. What works for me is stacking the wood to create a closed high temperature chamber, like a furnace, with smallish entrance holes for the air, and corresponding exit homes for the smoke.

@lori5946 2 ай бұрын

I agree

@livefreeordie7368 Жыл бұрын

I must say, I liked the way you did your advertisement in the top corner while the project continued to play. I was able to hear the sales pitch while staying engaged in the video. Well done

@chrisVNZ Жыл бұрын

Okay, was not expecting the portal gag. LoLs. This whole video is far more engaging than you'd expect from a video about a fireplace. Well done!

@zekeriyakazanci9509 Жыл бұрын

A great video. I do love your experimental approach and showing things step by step. Very instructive and yet enjoyable.

@Fixthisbuildthat Жыл бұрын

Glad you enjoyed it!

@meowwl Жыл бұрын

The fire shooting out of the holes is actually the wood gases burning. Honestly, fire ring is too large a diameter, and not tall enough to create those jets...It takes convection to create them, and the larger diameter keeps that from happening consistently around the ring.

@Fixthisbuildthat Жыл бұрын

Yep, exactly what I found. This is pretty much the best you can do with this style ring. But still way better than stock

@EdwardChen0 Жыл бұрын

I'm thinking the same thing, a taller and/or smaller diameter ring could work better. Either way, nice testing with the fire pit you already built!

@sjfsr 20 күн бұрын

I love the way you approach problem solving

@chuckloya5067 Жыл бұрын

I really liked your video, I've watched many and this video was the best. I loved how you actually tested the different size holes until you got what you were shooting for. I've got a similar situation and wondering what size the bottom holes are and how far down from the top are the 1/2" holes and how far up from the bottom are those holes? Thanks!

@owlcricker-k7ulm Жыл бұрын

If you notice on the Solostove the top opening is necked down smaller than the diameter of the main burn chamber. That increases the velocity of the air leaving the chamber and this increased velocity produces a slight vacuum in the chamber. The vacuum pulls more air through the secondary combustion holes making a more efficient second burn and less smoke.

@ImSuchAdorkHaHaHa Жыл бұрын

Go Vols? You got my vote brother!!!! GO VOLS!!!!!!!!

@probbyy5212 9 ай бұрын

I like the ad with the Mountain Dew. Short and sweat. The entrance was unexpected and the exit was smoothie. Had me dying 😂

@enpydenpy7771 Жыл бұрын

If you want a prtable pit you can use the drum of an old dryer It has all over the place holes and is really cheap

@tRRickedOut Жыл бұрын

This is what we use. Works great.

@jconnolly581 Жыл бұрын

If you ever decide to return to this project, you could place a small lip around the top of the internal circumference of the pit forcing the air for the secondary combustion in rather than straight up as it exits the holes while simultaneously trapping some smoke underneath the lip which may increase the combustion but also possibly reduce the airflow. I am curious to see the effect. It's a similar approach the reducing the diameter of the pit without making it look like a soda can.

@anomalous3039 Жыл бұрын

I appreciate seeing the principles as they are demonstrated in this video. I not only see that the design works, but I also see how and why it works. Now I understand better. Thanks.

@pikapao93 Жыл бұрын

Holly molly the commitment here!! I am amazed and impressed. If I ever get a fire place I now know how to build it for less smoke! Thanks so much for this video!

@ajaydesai6525 Жыл бұрын

I have made similar fire pit from the laundry inner tub, which has tons of holes. It works great with no smoke. It seems like in your experiment, the fire pit is too low so it doesn't allow much of the air flow. The upper holes should be at bit higher. Thank you for the experiment and share!

@diavalus Жыл бұрын

I have 3 of them, every one is surprised they do not smoke. I also use dry wood, which makes a big difference.

@bam5732 Жыл бұрын

I think the only factor here is using dry wood. 🤔

@Bike_Lion Жыл бұрын

@@bam5732 - They both play a role....Even with the driest wood, you'll still get lots of smoke if the fire doesn't have an ample oxygen supply. Likewise, even with the best possible air supply in the word, if the wood is wet it's gonna smoke. It would have been nice though if he'd actually shown the old pit with dry wood.

@scottcates Жыл бұрын

Laundry tubs are great. I believe they can also be stainless steel.

@diavalus Жыл бұрын

@@scottcates most of the time they are stainless steel, or at least the older ones are. Also, the older ones are driven by a big pulley, which can be left in place and serve as a stand. :)

@Tman317 Жыл бұрын

Great video and tests! Love the tape idea for drilling, I'll remember that. For my outdoor fireplace, I added a 12V 4" boat bilge blower underground, contained in drain pipe that draws air in from about 8 feet away and exits under the center of the pit. When I need to get the fire going quick, or reduce smoke, I turn that on (hooked up to a 120V to 12V adapter and a smartplug) with my phone app and boom...raging fire and no more smoke!

@mriguy3202 Жыл бұрын

I'd like to see a video on that! I've thought about doing something like it for my fire pit. How do you keep water out of the air duct? What did you use for the duct to keep it from decaying from the heat?

@scottsluggosrule4670 Жыл бұрын

You will eat a LOT of wood that way. Just make pit smaller so coals air mor in contact and heat that metal more. As I posted above 450F is minimum to get secondary burn.

@chelseaclerke3582 Жыл бұрын

That's awesome, I love that you really didn't give up until you got the best results possible!

@Reeltinyphish 7 ай бұрын

I watched your first fire pit video first, went to Home Depot and bought all the supplies and then the on Amazon. Now saw this video ha.

@TheFutureisTheFuture Жыл бұрын

I have a different brand than Solo and it is completely amazing. Really cool almost welding type flames coming out of the sides at the inner top and bottom. Some smoke but only on super wet stuff (I've burned mulch). I have 3 problems with the setup. 1) They are all very tall so its not really a firepit feel. 2) they are completely closed in except at the very top so heat is focused basically completely up. So they are not as warm either. 3) wood burns really well and super hot so it also burns fast. It's all very impressive physics and thermodynamics but it does not feel like a campfire pit type thing. Feels very "efficient factory produced fire that can melt metal." haha great video!

@Khaspre Жыл бұрын

Good observations. I wonder if it would help to suspend a flat plate above the fire? Theoretically that should redirect the hot air toward the outside of the firepit. I expect that the fire will eventually destroy the plate unless it’s made of ceramic or fire brick or something. And I wonder if a cone sticking out of the middle of the plate might encourage more even distribution of the hot air than only the flat plate. Seems like there should be a way to get the benefit of the efficient, smokeless fire without losing out on the warm, comfy firepit.

@Ti-mothy8248 Жыл бұрын

What brand?

@pearlberry---PearlyGates Жыл бұрын

So what brand do you have so I can check it out?

@TheFutureisTheFuture Жыл бұрын

Hi-Flame Bonfire Stove fire pit. 20.5 inches

@hybredmoon 6 ай бұрын

For that design, smaller fires will be more prone to smoke. That's why the large fire worked better. The fire has to be large / hot enough to heat the air in the gap so that it's primed for secondary combustion when it reaches the holes at the top. For that you either need a hot fire, or taller walls to allow my travel time which equals more heat.

@suckfuldodger 3 ай бұрын

yeah I'm looking at that manufactured one and I'm thinking, just taller walls

@RobertCornejo 3 ай бұрын

I rarely get heavy smoke with any pit, but it’s because of box fire in conjunction with tee pee style. It creates it own vacuum the hotter the fire the faster it’s heat is ejected along with its smoke. Needless to say, I like raging fires. Fill my truck bed once every two months with good dry wood.

@daumantsbrunins 7 күн бұрын

Such a great video. Thank you for your experimental project and a lot of advise along the way. ❤

@andersgrassman6583 Жыл бұрын

No time wasting bullsh-t, instead serious experimenting, at a nice flowing fast - just rigt - pace. I wasn't really looking for this, but I got curious, and stayed to the end. Your attitude and presentation really helps!

@grizzle273463 26 күн бұрын

Dude I've seen so many DIY videos and they're all good, but you had me so thoroughly engaged. I was locked in each step and was so eager to see the successful outcome. Great video.

@LRN2DIY Жыл бұрын

Super fun project, Brad - had me glued to the screen start to finish! I hadn’t really heard of smokeless fire pits unless they were propane or gas fed so that was pretty rad. Great video!

@Fixthisbuildthat Жыл бұрын

Thanks, Nils! It was a fun one to try

@brentfarvors192 Жыл бұрын

Wont even bother watching this BS; It doesn't work...

@Dgiztred Жыл бұрын

@@brentfarvors192 Did you try? What's your experience? I'd like to learn.

@brentfarvors192 Жыл бұрын

@@Dgiztred Yes. My "experience" is exactly as posted; The ONLY WAY to control the quantity of smoke, is to burn on a clear (high pressure), windless day, using the driest and most finely cut fuel available...Using the method posted here will make the fire burn HOTTER (More air flow= A hotter flame), but will do NOTHING for the smoke; Especially when starting the fire, and when it starts to burn out...I've tried with Pits/Barrels, and everything in between; You aren't going to beat physics...

@kirkmulhearn7931 Жыл бұрын

Yikes, there is a lot more science here than I had conceived, but the rewards are great…nothing worse than teary eyes around the camp fire, thank you for showing the way!

@The5hark 10 ай бұрын

Nothing worse than teary eyes around the camp fire? How about if someone fell in the fire?! That's third degree burns, KIRK! Sheesh, you and your first-world problems.

@wesleybushby4858 7 ай бұрын

Great presentation and great theory vs. practical application. One thing I have experimented with to "control" the direction of the smoke was to use a perforated steel panel and form it into a cone shape, to place over the pit. The conical and tall shape acts as an accelerator to draw more air is and to shoot the smoke up higher, out of your path. It would be cool to see you add that concept.

@NettiGaming 11 ай бұрын

I Love the work u did in this vid. I'm in Britain. We use old washing machine drum and fill holes halfway❤ Works a treat

@williamellis8993 Жыл бұрын

Interesting experiment, Brad. Keep in mind that equivalent area of holes doesn't equate to the same flow through them. For example it takes more than four 1/2" holes to equal the flow through a 1" hole. That's the engineer in me coming out now. Bill

@daveklein2826 Жыл бұрын

Wow we have a genius among us

@williamellis8993 Жыл бұрын

@@daveklein2826 No, just a retired engineer.

@happysniper21 Жыл бұрын

I appreciate the amount of effort you put into this. Makes me want to try this someday!

@Fixthisbuildthat Жыл бұрын

thanks!

@bon2198 16 күн бұрын

I make my own gasification stoves for camping with a quart can and a progreso soup can (they plug into each other). Get a much hotter fire and zero smoke as the smoke gets burned off. Going to do my fire pit the same way. Great video!

@donoimdono2702 Жыл бұрын

great instructional video! one key is keeping the fuel lower than the top holes

@Mithr4s 11 ай бұрын

I dont even have a fire pit but this video was suggested to me. I loved your energy and it was perfect editing, i love how you integrated the sponsor in the video while showing you drilling the holes and not making it just a seperate segment

@thehomefixer176 23 күн бұрын

There you go, DRY WOOD MAKES ALL THE DIFFERENCE! problem solved

@CandidlySubtle 10 ай бұрын

I love the experimentation/exploration behind this, and how he just didn't give up!

@Marozi1 Ай бұрын

Great video and I watched it as I get a lot of smoke from mine but my takeaway was mostly about making sure I use dry wood lol

@logannewman4532 10 ай бұрын

I think the geometry of the fire pit may have a lot to do with it. Smaller diameter and/or taller pit. You want the steel wall closer to the fire to transfer more heat into the incoming air. Taller wall gives the air longer to get hot on its way up and out.

@pseudocoder78 10 ай бұрын

This is what I was thinking the whole time. His fire pit is way too wide and shallow for this application, and using extra dry wood for the final test means his before/after doesn't mean much. If you build a super hot fire with super dry wood you're not going to have much smoke, it has nothing to do with the "smokeless" pit.

@aligatorsandwitch72 9 ай бұрын

Its definitely the geometry of the pit. The way the solo stove works is that the upper air vents provide fresh oxygen to hot, combustible fuel and burns off any solids. With the current diameter of his pit there is too much room for a heat gradient to form, this causes the upper air vents to pool cool air into a region of cool air and smoke.

@Pablo_nava 8 ай бұрын

I came here only to look for someone that has noticed the wide diameter of the fire pit. Definitely, an underrated perspective looking at the rest of the comments.

@craigsymington5401 7 ай бұрын

My thoughts exactly!

@anthonylaney1062 Жыл бұрын

Try arranging your logs into a lincoln log cabin style. lay 2 wood splits parallel to each other and then stack 2 more splits parallel but perpendicular to the bottom splits. like a tic tac toe cross. helps promote airflow! I use that technique when i smoke meat! Great vid Brad!

@Fixthisbuildthat Жыл бұрын

That's what I started with originally. The teepee definitely smoked less on start up though.

@anthonylaney1062 Жыл бұрын

@@Fixthisbuildthat really?? Dang. Ok ill shut up haha

@adityakulkarni1357 Жыл бұрын

Really appreciate the efforts you have put in ! It was lot of work and you did it with lot of patience and enthusiasm. Good presentation as well

@karieclingo8328 Ай бұрын

SUCCESS!! I'm impressed at his determination ;-) !!

@TheHobbyShop1 Жыл бұрын

The way you took a scientific approach was great and the colored smoke bombs were a brilliant. Nice work as always. This had to take about a week of experimenting to do all that and I appreciate that.

@WhiskeySavage0331 7 күн бұрын

Wanted a smokeless but I love a half in ground/half above ground pits... I basically dug a trench and used dryer vent and a metal grate. Several feet away is a Rubbermaid with a online bilge fan. Another few feet and a inflow pipe above ground. You can barely hear it when it's on. And the flame burns super hot. I keep it on low most the time. Only going on medium or high if still very green wood.

@marksmith9295 Жыл бұрын

Interesting demo. I once used an old washer agitator as a fire pit at a previous house in a rural area where fire pits were allowed and it worked fine. The fire smoked less when keeping the wood under the top lip and laying kindling and wood horizontally. This retains chimney effect in the fire albeit to a minor degree. I had to use mesh screen on top to prevent sparks floating away with the added benefit of being able to grill burgers etc. once there were some good coals. btw...will always get smoke trying to light a teepee fire with logs that large. That said, the WD40 would be good firestarter;)

@seapanther53 Жыл бұрын

After doing this project years ago, what I learned was it's easier to get the smokeless results with a smaller firepit ring. I think this is because in order to get smokeless results you need higher temperatures which is easier to get with smaller pits, unless you plan on burning A LOT of wood at one time. This is probably why the solos aren't that big.