Alden shoes are phenomenal. I spent thousands of dollars on high quality shoes working in car sales until I found Alden shoes. I bought two pairs, one black and one brown. I got them in the nick of time because my feet were in bad shape. I'm a polio survivor and one foot was a few sizes smaller than the other. Alden accommodated me by selling me mismatched shoes for a little more than the normal cost. We took careful measurements of both feet and sent them to Alden. When they arrived they were a perfect fit, something I had never experienced in my life. They wore like iron and looked and felt perfect.
@Stridewise2 жыл бұрын
I LOVE this story for so many reasons. That white glove support that higher end companies offer make it all worth it. Well, to a lot of guys anyway. Glad they're still lasting you and glad we put them at the top of the list!
@DavidP793 Жыл бұрын
Allen Edmonds far better shoe.
@fossil-bit8439 Жыл бұрын
@@DavidP793 than Alden??! No sir. I do love Allen Edmonds and own a few pairs. I have one pair of Alden’s that I got at a thrift store used and the quality of materials, attention to detail, and craftsmanship is better. Allen Edmonds has slipped in quality over the years and their products aren’t fully made in the US anymore but with “globally sourced” supplies…
@DavidP793 Жыл бұрын
@@fossil-bit8439 I didn't know that. I have 4 or 5 pairs from AE but they were all purchased at least 10 yrs ago. I send them in every 2-3 years to be restored and they come back in great shape. Too bad the quality has slipped.
@zackz12604 ай бұрын
they’re litteraly made out of dog shit materials 😂
@edge12892 жыл бұрын
As a power lineman for over 4 decades, I’ve climbed in Knapps, Lehighs, Chipewas, Red Wings, White’s and IMHO the best climbing boots are Wesco Highliner. Wesco will send a ruler and instructions to measure and trace your feet to build a custom shoe and if they wear out, they’ll rebuild them for you. Best boot I ever climbed in.
@Rlinn782 жыл бұрын
Wow I haven’t heard Knapp boots in a while.
@carlcarlamos90552 жыл бұрын
I have a pair of those I’ve worn less than 15 minutes in the house. They fit well, but because of the way they are constructed, they are painful to wear. I have a pair each of White’s and Nick’s that feel fine because they are constructed differently. Sometime I’ll take them to Trenton & Heath and see if they can straighten them out.
@Stridewise2 жыл бұрын
Yes, Wesco are hard to get but I've only heard good things. I added them to the written article, thanks for the push Edge!
@johnfairchild3421 Жыл бұрын
You are right my cousins are lineman and that’s what they wesr
@eva2k02 жыл бұрын
Can attest to Thorogood boots, particularly the Moc Toe Wedge being great. Worn it for 3 years, day in and day out in wet, rough conditions and they've held up well. My tan Thorogoods formed a dark patina and are now a fairly dark brown color. They still clean up okay, but I recently bought a second pair to have the originals sent out to be redyed and resoled. For comparison, a pair of Red Wing blacksmith boots worn for a year in roughly the same conditions were letting water in through the stitching and eventually wore a hole in the leather where my pinky toe was. The Thorogoods are also way more comfortable. I don't think I'd work in a heeled boot ever again unless I was up on a latter all day.
@ericochoa4271 Жыл бұрын
All I ever wear are heeled boots you just gotta find comfortable ones. I need the heel because I do line work so the heel makes me feel safer when I climb. I have waterproof red wings with the supersole 2.0 and comfortable are as hell. I'm on my feet all day and I'll wear them over my sneakers on weekends since they feel more comfortable.
@ronherman60333 жыл бұрын
Hope you guys can do a review on Origin boots...
@Stridewise2 жыл бұрын
Little update: Chippewa's Heritage boots have been discontinued and Parkhurst moved production to Spain and increased in price! Also White's is technically Japanese owned, but American made. Also, check out THE TOP 10 BOOTS you can buy (in under 10 minutes!)! kzfaq.info/get/bejne/b9Gle9yqysyyd3k.html
@andrewlast15353 жыл бұрын
Love the Wisconsin connection in many of these brands. I bought a pair of the Thorogood’s with steel toes and didn’t even know they were a Wisconsin brand. Grew up 40 minutes from the factory.
@tonyaparker85632 жыл бұрын
i was wearing timberland but they were severly hurting my feet ,,,, i got a pair of red wing boots with a nonmetallic safety toe and metatarsal protection on the box they are marked 4456 and they instantly stopped my feet hurting they are very comfortable i work in a foundry and they are holding up very well ,,,,, the best work boot ive ever worn
@shaynelaw96293 жыл бұрын
Love this video and Love seeing you guys together! Over the past couple of years I have developed a passion for boots and Stridewise and Trenton and Heath have had a lot to do with this new interest. Thank you for the education and inspiration!
@Stridewise3 жыл бұрын
Thanks for sharing Shayne!! Delighted this was useful for you and glad to meet another boot dude.
@RobertKirkpatrick843 жыл бұрын
Hey love the video, but I have to say the audio seems really weird with an odd split between l/r channels. It is a bit jarring.
@KeithWeast3 жыл бұрын
A problem that occurred during recording and overlooked in post
@garykordyzon50323 жыл бұрын
I certainly enjoy my pairs of 1000 Mile boots made in Rockford, MI.
@jbeutell3 жыл бұрын
I have a pair that I love. I was told Wolverine has them built by Allen Edmonds in Wisconsin, but I have never dug into it.
@robertdieder41783 жыл бұрын
im surprised Wolverine didnt make the list..ive heard great things about them
@paulklink53872 жыл бұрын
I bought 2 pair of Axel 1000 Mile boots. I returned 4 pairs, before I felt I received pairs that were acceptable for a $400 pair of boots (I wanted the Vibram lug soles on the Axels, wish I did more research or saw this video to open my eyes to some real boots) There were quality control issues with straight stitching, blemished leather and crookedness of the leather. I wouldn't buy Wolverines again, they are focused on the "hipster duchbags" as another person said on here.
@culldera12 жыл бұрын
Sucks about the pollution in Rockford bc of Wolverine though.
@CH-19842 жыл бұрын
Ever heard of Mason Shoes of Chippewa Falls, W I? We were given a pair of high ankle lace-up men's boots, over 1" heel but smooth (no tread) bottom. Are these for certain kinds of work floors?
@bufordteejustice1119 Жыл бұрын
I've been wearing my Redwing Irish Setters for years . I get them resoled as needed and they are great. Thanks for sharing.
@chriswilkins72443 жыл бұрын
You guys need to take a look at Origin boots. Made in Maine.
@tylerthompson30753 ай бұрын
Origin are trash. I'd rather have a pair of JK 300's
@martelhermann5202 Жыл бұрын
Being from the Pacific Northwest, I am always gratified to hear mention of WESCOS's, White's and Nick's boots. But I am always baffled that Danners get left off of that list as well! They build some high quality boots, but they have become a big company making shoes for Cabellas, Eddie Bauer, REI and other outdoor stores, at a price point where the retail shop can make a profit and still offer a decent boot. I used to be mostly interested in hiking boot brands growing up in the 60's and 70's, like Vasque, Asolo and Danners. Now, there are just so many good brands out there that to make up an exclusive list tends to leave off several brands of high quality, rebuildable, long lasting boots.
@jonathansmith2833 жыл бұрын
I wore danner when working ( L E ) , still wear them . ive had them re-soled at the factory 2 x. I believe they are all USA . ~ JDS/CT
@seanwhite3042 жыл бұрын
I've been wearing Danner GTX Footwear for 12 years . I'll honestly never change . I absolutely love Danner Boots
@chrisp55263 жыл бұрын
I really enjoy OakStreet Boot Company. A small company, that has multiple limited editions; so you can have a boot that you may never see someone else wear. Great quality, and looks. 100% made in USA.
@jr4chargers3 жыл бұрын
Love their boots! :)
@bfettrules12393 жыл бұрын
Yeah I have a 2 pair of trench oxfords, 2 pairs of derbies and a pair of storm boots. I plan on getting a pair of natty cxl trench with dainite soles for my next purchase with them. I also have 2 cxl belts from them.
@davidtornberg84133 жыл бұрын
Nice video. I really like my Chippewa boots. Made in the use and super durable and comfortable!
@The_Kavalier3 жыл бұрын
The crossover we all deserve
@elderhiker77873 жыл бұрын
I started wearing Danner's hiking boots in 1975 and I've never looked back. They are extremely well made with top quality leather and other materials. But, the most important attribute is they fit well. I have wide feet and high arches and Danner just seems to get it right. The reason I don't try other boot makers is fit and comfort. I've never been disappointed with Danner's and I don't want to spend $300+ dollars for a "fashion" boot. I want comfort, support, and durability in the terrain that I use them. I'm 77 and I just got a new pair of Danner 650's for my birthday and they are super.
@Kslater233 жыл бұрын
The triple threat of adding the Kavalier is needed!
@v10moped3 жыл бұрын
KZfaq dork.
@elderhiker77873 жыл бұрын
@@edmundooliver7584 you are so right.
@PlazDreamweaver2 жыл бұрын
You next.
@stevebarthelmes89792 жыл бұрын
OriginUSA is making 100% USA boots. Would love to hear your thoughts about them. They are doing a lot of good stuff up in Maine and now North Carolina.
@Cupofgo Жыл бұрын
Their midsoles are sourced from Brazil.
@harshtimes232 жыл бұрын
Due to recently going to business for myself I’ve been able to buy some premium American made boots. I appreciate the craftsmanship.
@Stridewise2 жыл бұрын
What boot did you go with?
@JonathanGrandt3 жыл бұрын
Well it’s a good thing you included Nicks and Whites. Personally I favor Nick’s overall Quality and attention to detail.
@USDAselect3 жыл бұрын
Awesome collab guys. Weirdly I watch T&H to relax. These guys are the best.
@The1860th3 жыл бұрын
Oh same. I loooove the ASMR boot repair.
@danshakuimo3 жыл бұрын
I was gonna say, one of the most ambitious crossovers
@Stridewise3 жыл бұрын
@@danshakuimo Excellent comment
@dylancrouch2733 жыл бұрын
It's not weird. Watching artisans artisan is a universal pleasure.
@furiusstiles32143 жыл бұрын
Very well done. Straight to the point. Time stamps. Good information. Thank you!
@Stridewise2 жыл бұрын
Glad someone appreciates the time stamps :D
@Frostflakes082 жыл бұрын
Not surprised to not see wolverine in the lineup. They were my first pair of nice boots I purchased. The 1000 mile boot looks nice and broke in pretty easily but I ended up getting a small rip in the leather on the side of the boot. I know I can repair it but I ended up buying a pair of Chippewa boots and they've been holding up better for a few years now. The leather is better than in the wolverine boots and with my work I don't have to worry about it falling apart.
@frankrizzo71853 жыл бұрын
Two entertaining experts! Btw I recently bought a pair of Allen Edmonds Rainier boots on sale for $199 (!) and they are flawless. No QC issues at all. And, I love my Higgins Mills, so I continue to enjoy Allen Edmonds and that they are American made is a plus.
@corensam3 жыл бұрын
Video hype! Been keeping an eye out for this since that Instagram post. Parkhurst so deserves the value kudos on there, amazing value and quality.
@lh83723 жыл бұрын
Wolverine 1000 Mile are super comfortable once you break in the leather footbed
@Sound_Spark3 жыл бұрын
Not to mention they're affordable and not overpriced like the boots in this list.
@EQ99623 жыл бұрын
Russell Boot company in Wisconsin. Handmade, custom boots with a moccasin build. Amazing boots. Have been wearing them daily for a decade
@c-dubya9882 жыл бұрын
I have the mock toe TG boots . Best pair I’ve ever had period.
@NOFBDYBS3 жыл бұрын
Can't go wrong with Wesco, Nick's or White's. Basically comes down to style, as quality and durability is a non issue.
@krustysurfer2 жыл бұрын
So which has a better footbed out of the three? I'm still undecided out of the three my Red Wing loggers are a little small for me now the steel toe caps do not stretch hahaha and they've taken forever to break in and are now just getting comfortable being in for 8 hours I think I'm going to have to go to Washington State and get a custom fitment but I'm undecided on which of the three I want to go with.
@jmoore201219923 жыл бұрын
Gokey boots are also incredible. Made in Missouri
@wizardofahhhs7593 жыл бұрын
Russell boots are very similar to Gokey but hand made.
@ryanfitzalan86343 жыл бұрын
Parkhurst !! oh yea, West New York Representing! just got my new pair of shoes there. met with one of the owners and tried on multiple pairs. found my size, talked all sorts of shoe and boot talk. Those people are giving it their all to be in the top tier, please consider them everybody. The shoes fit amazing and are absolutely beautiful.
@caseyshannon20542 жыл бұрын
i recently got a pair of Chippewa boots on sale for $80, and i am extremely impressed
@2manyhobbies763 жыл бұрын
Love my Wolverine 1,000 Mile Boots. Classic, handmade in the USA!
@ryanfitzsimons73882 жыл бұрын
Love mine also!
@Abruzzo3332 жыл бұрын
Same here. Have had mine for many years and they still look great. Not surprised they weren't included as Stridewise has negatively reviewed them in the past due to having purchased a pair that have ''loose grain" problems in which the leather develops weird unsightly wrinkles that happens sometimes with Chromexel leather. My pair have no such problems.
@steveeab23643 жыл бұрын
Very enjoyable video. I'm sure I'll end up watching it again before long. More journalists, former or otherwise, could stand spending some genuine time in heart of America workshops.
@Stridewise2 жыл бұрын
Haha did you know I used to be a journalist? I still host/write from time to time, Stridewise keeps my camera skills sharp!
@steveeab2364 Жыл бұрын
@@Stridewise I believe I heard you mention it in a video somewhere along the line.
@chickdoc Жыл бұрын
I have found that Peter Limmer in New Hampshire makes a great hiking boot, The problem is the wait time for a custom boot (a couple of years), the cost (500-750 per pair) and the weight (4-5 lbs per pair)
@Heywoodthepeckerwood2 жыл бұрын
I’ve worn Whites work boots for work work, their packer boots for farm work. I’ve worn Red Wing iron rangers for daily wear and their super sole 606’s for work (still US made) these are the most comfortable work boot by far. Danner Quarry USA for work and their Bull Run for daily wear. Danner are great too but, I tend to lean toward the whites and Redwing because I don’t like lined boots and they have a larger selection of unlined actual work boots. They’re all great though. I also have a pair of Allen Edmonds shell cordovans that I love but their a bit dressy for me and a bit too casual for dress up if you know what I mean.
@cameroncato49103 жыл бұрын
Would love to see another video like this but with cowboy boot brands!
@Blingem142 жыл бұрын
Would love to see a breakdown of Origin boots. They are a fast growing company. I also love their jeans.
@whereRbearsTeeth2 жыл бұрын
🤣
@sisleymichael3 жыл бұрын
Very good video. Comprehensive. I liked how both of you pointed out the working man boots. Good job.
@VooDoodaddy753 жыл бұрын
Great collaboration guys....love & subscribe to both of your channels. I've learned so much over the last year about boot making, quality and value. Got burned a while back on a pair of Wolverine chukkas that I thought were stitched, until the faux welt started peeling off and found that they were cemented! Not again. You guys are boot rock stars, you know that, right? Right?? ;-)
@damian23813 жыл бұрын
Hi Stridewise! Could you make similar video for boots from Europe? Sometimes is quite tricky to buy boots from USA as the return's policy is not on our favour, additional taxes and shipping can add additional 100$ to boots and also there is no possibility of free return. It would help a lot of us to find really good bots made in Europe. Thank you, wish u a lovely day! :D
@chrisfournier61443 жыл бұрын
You started out with my personal fave - ALDEN! Admittedly they are more expensive than many of my other boots but I feel that they're worth it. Redwing are my daily go to boots but I have taken it personally that they've discontinued the Beckman model! As a Canadian I really like buying boots made by my neighbours to the south. I only regret that I can only wear one pair at a time...
@jeffreykatz13302 жыл бұрын
Spoke with Redwing most likely releasing Beckmans later this year on a different last!
@stewartwallace57418 ай бұрын
Love Alden’s cordovan boots.
@nathaneggen68153 жыл бұрын
So I’m wondering why you choose Chippewa over Wolverine? I would’ve thought the 1000 mile would’ve made the cut?
@TemptedL9Gaming-Subscribe3 жыл бұрын
I can send you a video of why if you want 😆 my wolverines have only half a sole left after about 5-6 months on a sawmill my chippewas have scratches in the leather and other than that look new after almost a year at the sawmill
@davenhla2 жыл бұрын
Last I checked, 99% of Wolverine boots are made in the far east. Didn't used to be, but that was then. Sort of like Carolina boots. People bring up Danners, but they are about the same anymore, like 1 or 2 models made here that cost $500 and have iffy quality because some parts were made elsewhere and the rest are chinesium to compete with wally world.
@naughtyskywalker92922 жыл бұрын
Fucking China.
@MMM88X3 жыл бұрын
Great video.. I wish you'd have included Rancourt from Maine. Though Rancourt is more casual than workwear, and are blake stitched, rather than Goodyear, they are still very underrated in my opinion. Cheers.
@iceman51172 жыл бұрын
There's nothing wrong with Blake stitching
@nofacedetected3 жыл бұрын
Man, I love my Danners, but I also really understand why they aren't anywhere on this list. Really wish they tried harder to compete with redwing and thorogood in general.
@Ego_Katana3 жыл бұрын
I agree but associate Danner with "hiking" boots vs work boots. I have a pair of Danner Mountain lights that are amazing after they have been broken in.
@EssenceofPureFlavor3 жыл бұрын
I think Danner makes great boots. They just serve a different market. I would never take Red Wings into the mountains.
@Kingfisher12153 жыл бұрын
Danners aren't worn by hipsters.
@nofacedetected3 жыл бұрын
@@Kingfisher1215 I wear fort Lewis's so you're clearly wrong
@Kingfisher12153 жыл бұрын
krian13 so pavement pounders. They never see mud, sawdust, or grease and oil stained work floors.
@georgewashington9383 жыл бұрын
Frank's boots are also made in Spokane and to my eye look like they are constructed identically to Nick's (many of the employees have worked at both companies)
@rgrignon2 жыл бұрын
This is awesome, guys. The video I've been waiting for. Thanks for the depth, haven't heard of many of these!
@Stridewise2 жыл бұрын
Our pleasure! Glad you liked it Rex
@StylishGreaseMonkey3 жыл бұрын
Two on my favorite channels on KZfaq! Amazing work guys! Thanks!!!
@troyano65482 жыл бұрын
You guys didn't mention anything about Kreosote boots...🤔
@Kingfisher12153 жыл бұрын
A list of best American made boots and Justin's or Lucchese's aren't on the list? I just stopped by Baker shoes today driving through Eugene and I think their Drew boots measure up with Nicks and Whites. They are made in Spokane just like the other two. Is this a list of best boots worn on pavement to the local pubs?
@mimas1203 жыл бұрын
Maybe, Lucchese, but get out of dodge with Justin.
@Kingfisher12153 жыл бұрын
@@mimas120 clearly you didn’t grow up in cattle country.
@mimas1203 жыл бұрын
@@Kingfisher1215 bold assumption... I'm a son of a dairy farmer. Milked cows my whole childhood.
@Kingfisher12153 жыл бұрын
@@mimas120 the your comment is curious. I have some 45 year old Justin’s in my closet and when I was young the higher end western clothing stores around stocked Justin’s more than any other brand. They were a premium brand on par with Tony Llamas. Out sold TLs four or five to one. This list is for the little trendy boot wearers who need something to wear on pub crawls. Whites, Nicks, sure, but some of the other choices are questionable.
@mimas1203 жыл бұрын
@@Kingfisher1215 I just find the quality of Justin has gone down hill compared to a lot of other boot companies. Hell they look nice for sure and they last, but they wouldn't be my first pick against some other brands. No hate intended friend.
@LKS-19763 жыл бұрын
Just picked up Nicks/Rose Anvil boot. Look at origin boots. Made in Maine. Love my bison boots.
@mikesmusicden2 жыл бұрын
Great review - thank you for taking the time to make this!
@sed62 жыл бұрын
Wow, I thought just deciding USA made was going to be easy. Now I've got to consider what state I want mine made in. Very cool! 👍
@Stridewise2 жыл бұрын
Great problem to have!
@matttherrien9608 Жыл бұрын
1st world problems!😂
@zafotbeeb2 жыл бұрын
The guy in the leather coat is near totally in coherent or understandable.
@CrashCarson142 жыл бұрын
Love my Chippewas have had them for almost 6 years. Just replaced the heel rubber but that’s it
@Jebro4393 жыл бұрын
Great collabo. Love you guys do videos together. I think this is number two.
@TheRacerRich3 жыл бұрын
Manhattanite to Volunteer: What do you call a place where you repair things? Volunteer: A shop. alternate convo: Manhattanite 1 to Manhattanite 2 : What do you call a place where you repair things? Manhattanite 2: This is my Atelier.
@ScooterFXRS3 жыл бұрын
I've tried Red Wing. My feet where never so sore as being in those.
@patrickperry69453 жыл бұрын
Red Wing went to hell about 30 years ago.
@joshm34843 жыл бұрын
Give them a few months and keep conditioning them. They'll fit like slippers Edit: I'm only familiar with their heritage boots. I can't speak to the quality of their standard work boots.
@108mmd3 жыл бұрын
Have you ever though of trying Waldviertler Tramper Flex boots? They are hand-sewn in Austria and still very affordable. Soles can be changed of course. Really long living boots and not made in Asia, but by hand in Austria
@user-qo3kf1yz1u3 жыл бұрын
I wear Danner when I hike. I wear White’s boots when I do chore work. I wear Alden when I m in office. I wear Red Wing when I go shopping.
@kevinbarrett96153 жыл бұрын
Pretty thorough, although I would include Danner in this lineup, awesome boots.
@mikeogden52563 жыл бұрын
Absolutely 🇺🇸
@jerrybartlett74793 жыл бұрын
Filson make great boots also
@davenhla2 жыл бұрын
The majority of Danner's lineup is made in the far east now. They still make a few here though. But that might have been an influence in these rankings.
@Woofy-tm8si2 жыл бұрын
I have a few pairs of Danners I wear weekly. My pair just of Recons celebrated their 20th birthday this year and they still look nearly new. Once broken in, they're so comfortable I could easily sleep in them. The hiking boots were built on the same last and look similar to my Recons but in DARK chocolate leather and are the best hiking boots I've owned, and I think I've owned every brand of hiking boots REI has to offer. I owned a pair of imported Danner boots and although decent, didn't measure up to Danner's boots that are handmade in Portland, Oregon.
@bflathead3 жыл бұрын
Excellent video. So glad to see Parkhurst getting well deserved props. The feature on the Parkhurst Boots that really stands out for me is the actual weight of the boot itself. Solid construction without the weight. Great styling as well.
@Maht252 жыл бұрын
love my Parkhurst. I know they're experiencing a backlog but I'm hoping it all works out for them and they get back to it. I'd love another pair and I love to represent Buffalo.
@FT4Freedom2 жыл бұрын
Got my sz12 Danner USMC stichdowns for $85 new. Waxed them up real good. They will last forever doing moderate forestry work.
@mcbridecreek3 жыл бұрын
I’ve owned White boots for years. I had a couple pairs rebuilt. Also I am a fan of Danner boots made in Portland.
@danherrick57853 жыл бұрын
FYI - Years ago I worked for Danner. In the Danner plant, we also made Whites Boots.
@fredseekingbibleturth3 жыл бұрын
As we are talking about American made boots. What are your thoughts on Role Club boots? They are Made in California. Find them on the you tube Channel called Brian the boot Maker.
@jeffreygoss81093 жыл бұрын
They are really bespoke or close. I have heard great things because they are custom but they take a while, I think there is a huge waiting list. I really love the lace to toe but went with Txture instead.
@Stridewise3 жыл бұрын
They're great! I actually included them on the full list: stridewise.com/best-american-made-boots/
@frankvillatoro23313 жыл бұрын
@@jeffreygoss8109 can confirm the lead times are in the 2 year plus right now. Their shop is near me and I can say Brian is very passionate about what he makes!
@jeffreygoss81093 жыл бұрын
@@frankvillatoro2331 plus he is working on his truck😂. I’m sure they are worth it.
@fredseekingbibleturth3 жыл бұрын
@@Stridewise cool and thank you. About a year or so ago I did try and order red wings after finding they were made in America but I didn't know what I was doing and the ones I got say they are made in Vietnam. They also say Irish setter red wings not just red wings. The first boot I bought that I know of that was over 100. Also first real leather boot I bought that I know of. They are very warm though even with no insolation. Great for winter it seems though. I recently bought a Carolina brand boot also made in Vietnam that almost looks the exact same as that red wing Irish setter boot from a Christian store that was selling them. Not sure what you think of Carolina boots. Maybe I will search your channel later and see if you have anything about them. :) Thanks again.
@dillonquick51343 жыл бұрын
You guys were the start of my boot obsession. I bought my first set of “nice” boots with the redwing iron ranger in copper rough and tough. I absolutely LOVE them. I’m looking at a pair of nicks as a step up!
@khancrow82123 жыл бұрын
how many weeks did it take for them to get more "comfortable"? Just ordered same redwings as you because I am tired of shit falling apart every 6 months.
@dillonquick51343 жыл бұрын
@@khancrow8212 For me not that long. After about 2 or three days, but I coulda got lucky. I got a redwing store 5 mins down the road so I got the perfect fit.
@khancrow82123 жыл бұрын
@@dillonquick5134 intelligent choice haha thanks for the info, i will soon find out
@dillonquick51343 жыл бұрын
@@khancrow8212 Congrats on the boots and good luck. Those boots have started a boot obsession for me
@dcarr5533 Жыл бұрын
Thanks for the reviews. !
@chinatownboy748211 ай бұрын
I'm the "ham and egger". The "brown bagger". I wash dishes at Panda Express. I make the prevailing wage. There is no way that I can afford to buy boots which cost more than a week's wages.
@hrdwrkman23 жыл бұрын
Your all forgot to mention Wolverine boots, some good ones still made in USA !
@zack99120003 жыл бұрын
what is sold at the local stores are made in China, have to order from their website for usa made
@Desert_Muley3 жыл бұрын
I would love to see a video of the most comfortable boots. I am on my feet all day but not in construction. I am always looking for American made have looked at some Redwings but the leather is as stiff as steel.
@jamesday73443 жыл бұрын
Takes a while but they break in
@johnnygorena53183 жыл бұрын
Oh boy and when they do nothing beats redwings
@DMorgan773 жыл бұрын
Great video Nick. T & H are awesome and I love their content.
@jims19423 жыл бұрын
I just bought a new pair of *Chippewa Ellison* 6" lace-up boots about 2 or 3 weeks ago. So far I love them, they're breaking in well. :)
@paulellsworth40073 жыл бұрын
I was turned on to Chippewas and now I don’t buy anything else
@nunkoboys28653 жыл бұрын
Caught this one brand new. Have you ever heard of Kreosote boots? I learned about them from Carl Murawski, and he just made this video about a fantastic interview with the owner of Kreosote, I think those boots are amazingly unique and impressive.
@Stridewise3 жыл бұрын
I put Kreosote in the article! stridewise.com/best-american-made-boots/
@nunkoboys28653 жыл бұрын
@@Stridewise Thank you, that’s a great article. I love that you included a category for “best chicago boot”, that’s pretty funny.
@petersilecchio44173 жыл бұрын
Hi. Great Video. Thanks for Making this Video. Sad a lot of USA Made Products are not made here anymore.
@Stridewise3 жыл бұрын
@@nunkoboys2865 I couldn’t think of something specific for oak street but I still wanted them in there lol, that’s internet marketing for you
@rheinhartsilvento25763 жыл бұрын
Were they introduced by Mr.Creosote?
@ttop643 жыл бұрын
Hey Nick. I love it when you do these videos with Trenton and Heath . It always looks like you have a lot of fun. If you ever get over to the UK you should do a video with Dan at Tring shoe repair and key shop. I'd get a front row seat for that one. : )
@kyleromero13793 жыл бұрын
Crazy how I been binging both of your guys channels really hard lately then boom 💥 a collab
@Stridewise3 жыл бұрын
We sensed your bingeing Kyle
@toddwoods11463 жыл бұрын
I use whites for construction in the pnw. I've had them rebuilt once and they hold up great highly recommend them
@mcbridecreek3 жыл бұрын
Ive bought 3 pairs of Whites starting in 1981. The second and third pair I still have. They are great boots if you need heavy boots. Btw my last name is King and I have a brother Todd King.
@wizaxed3 жыл бұрын
No mention of Wolverine boots? Are they not made in U.S.? That surprised me. I need some Red Wings though!!
@EDHBlvd3 жыл бұрын
Wolverine quality is poor. I own 3 pairs, and 3 of them have failed. One pair the rubber vibram delaminated from the leather sole. On my other pair, the heel literally detached from the sole. I sent photos to a couple cobblers and both pointed out that Wolverine should have used nails to attach the heel to the sole of shoe, but it seems they relied on cement, which failed. I will never buy another pair of Wolverine 1000 Mile boots. They are not worth the money. It’s a $200 boot being sold for almost $400.
@wizaxed3 жыл бұрын
@@EDHBlvd I lucked out and got mine for $189...cheaper than my Thursdsy Boots. I enjoy my 1000 miles so far, but they don't get a ton of wear or abuse. I will keep an eye on the heels. Thinking a 360 welt would be a nice upgrade. Maybe if I ever get them re-soled.
@Kingfisher12153 жыл бұрын
EDHblvd my Krause models are very well made. The heels are nailed to the soles. But the Krause might have been higher end.
@cormblue3 жыл бұрын
Surprised Danner didn't come up given their Military quality. Good video regardless
@user-qm9oo2fd2o2 жыл бұрын
Have you read the reviews on Danners own website? I was shocked as I’ve worn Danners for years. Their work and hunting boots are great!
@eloycavazos28163 жыл бұрын
Nice collab! Love Nick and Trenton and Heath!
@thomasbaker1961 Жыл бұрын
Two pair of the same model Carolinas’ five years apart. I don’t have to think about’em “They got me”.
@jay-rus44372 жыл бұрын
While I love my red wing weekender chelseas, I feel like they got away with selling us a $150 boot for $250 because it is in the heritage lineup. Again, love them, but do feel they are overpriced, especially when considering the type of stitch out construction
@edyue12 жыл бұрын
Yeah don’t forget the cardboard insole layer 🤦🏻♂️
@leeprice28492 жыл бұрын
Yup, my first quality boot. Red Wing Iron Ranger It's been great very durable and comfortable.
@matttherrien9608 Жыл бұрын
Iron Rangers are my first as well. What comes next? God knows! All I know is that there is no going back!
@JohnEZang3 жыл бұрын
Love Parkhurst. Can't find better value and service from an American boot brand. Don't regret any amount of money I give to that company. Andrew is great.
@fb1473 Жыл бұрын
Thanks for the very informative video
@genegibler80533 жыл бұрын
I spent 55 years in heavy work boots, not the heavy tennis shoes mostly featured in your video. I started with Red Wings that were readily available locally. They didn't last long. I found Nick's 14 inch loggers with Vibram sole, and never looked back.
@bondalero00742 жыл бұрын
Glad to hear; I started in shipbuilding industry in 92’ (30 yrs now) and “ONLY” Redwing for me. I’ve even had loggers on one end of my spectrum(work) and then there is my Redwing Engineer slip-ons; they are expensive but feel like slippers yr when I put on my feet. I went outside of Redwing this year since I moved in a classroom setting/environment teaching Sheet Metal ( still wearing the Redwing Engineer&Redwing NailSeat 1155) but had to try Wolverine 1000 Mile Oxblood loafers. I hate Wolverine work boots but let me tell you these are on another whole plane of comfort. Don’t know why, I just like the feel of leather soled shoes and till you have worn them; you will “Never” find comfort in your day to day activities!#Redwing#Engineers#NailSeat1155#Wolverine1000Mile
@youtubeed123453 жыл бұрын
I’ll take this anytime over sneakers
@wadejensen33013 жыл бұрын
Loving the collabs mate..keep going strong!
@Stridewise3 жыл бұрын
Appreciate it Wade!
@nilsjohansson97393 жыл бұрын
I was not aware of all the boot companies in my home state of Wisconsin!
@amskater1233 жыл бұрын
Digging the leather jacket!
@natesmith55753 жыл бұрын
Thanks for the video guys! But a point of clarification....The Red Wing "Iron Rangers" is a reference to the Iron Range in Northern MN where they mine iron ore, not coal.
@Stridewise3 жыл бұрын
(That's what was in the script, Trent misremembered it!!!!!)
@selfexplanatory64593 жыл бұрын
Awesome video as always
@rockon21ful3 жыл бұрын
Love it, Awesome video and you couldn't team up with better people than T&H!!
@davenhla2 жыл бұрын
Great video! Sometimes it can be hard to decipher who makes what and where these days. I have a question for the experts! I am looking to buy a good quality boot/work shoe. My days of needing safety toe is over, but I work in manufacturing and have to walk on concrete all day, and my shoes/boots can be exposed to very high temps on occasion(melted plastic, 400+ degrees) but only briefly. With that in mind, here's the kicker: I weigh 285 lbs. I am not fat(I used to pick my buddies Plymouth up by the back bumper) and it just strikes me that I am unable to find a pair of shoes, workboots, whatever that are designed to take the beating my weight puts on them. Almost every pair of sports shoes, hiking boots, whatever I have had has had the insole and whatever is under it crushed/squashed out before the rest of the shoe is worn out. Occasioanlly I will have one hold up but the sole gets thin and worn funny, which is bad on concrete. I haven't had an upper wear out on me in at least 30 years now on any footwear. Most workboots are the same, I destroy the insides of them before the outer parts go bad. Can you recommend a nice leather shoe-ish boot that will hold up to working on concrete under my weight?
@MrStreetninja0073 жыл бұрын
Odd not to see wolverine 1000 mile
@iankelley75743 жыл бұрын
There's another boot company in Spokane that makes an identical boot to Whites & Nicks. The company is called JK boots and is family-operated.
@HariOmRadhaKrishna3 жыл бұрын
We are fans of Danner (Portland, OR) & Red Wing (MN) boots
@LysanderLH3 жыл бұрын
Goes straight over to Rose Anvil to see what these look like when bandsawed in half.
@danielduba41012 жыл бұрын
The best work boots I have ever worn are danner power foreman's. They put throughgood wedge sole boots to shame. And they are union made in Portland Oregon. Most of these boots seen here look like hipster specials 😆
@blackbiker19612 жыл бұрын
To this day I still don't know what a hipster is.
@mikerossman98632 жыл бұрын
My thoughts exactly….never heard of any of these yuppie hipster boots. Tough to beat Thorogoods, might have to try a pair of Danners.
@danielduba41012 жыл бұрын
@@mikerossman9863 don't buy the quarry wedge, only the power Foreman. They are outstanding. If you need a field boot, look at the super rain forest line.
@edyue12 жыл бұрын
Uh, Nick’s and White’s can be worn by hipsters but they seem to be true work boots as seen on loggers and wild land firefighters 🤔
@8d4o0c42 жыл бұрын
I wore Danner boots with the Marines and have a ton of respect for them (still have a pair, in fact), but their build quality is simply not as good as Nick's or White's.
@markdearlove86343 жыл бұрын
Great collaboration and information
@chrispowell90143 жыл бұрын
The collab videos are awesome, really enjoyed the video👊