Awesome! That's MUCH easier, with the same results than any method I've seen. Thanks man!

Thanks mate. I liked the simplicity of the way you showed the process.

I’m doing my first parking lot this Sunday! Thanks for the help!!

Nice job... For width consistency you can actually drive some long screws from one board to the next (near both ends) and if done right, it might give you the ability to change width by adjusting the screws.

Brilliant! Thank you for teaching us and posting this video

We just asphalted a small area that we wanted to fit two cars in. They fit, but barely, so I wanted to add lines to make it easier to consistently park correctly. I just used duct tape and the results were just as good. However, it took longer lining up the duct tape and it was a pain, because some parts didn't stick well and I had to be careful to not get the paint under the tape. I like this method better. Much quicker and eaiser. One thing you might want to do it when you're spraying, use a box. I noticed when I did it, even though I never went over the tape, there was the tiniest bit of overspray here and there, almost giving the lines a "halo effect" in spots. Again, it looks great, but using a box, there would be 0 overspray. I'll have to redo the lines every year (since I have to seal the driveway) and I'll use your method with a box, which should be super quick.

Great video, I have to paint a new Handicap van parking space at our HOA. This really helped me out, I have a sprayer but I think I will use a roller using your method with the 2x4s Thanks for the video!!

Very nice job and great advice! Thanks

Looks awesome. Great tip. Thanks!

Thanks David! I’m doing my first parking lot stripes today and I needed the tutorial. I was planning on using a 211 but I had no idea how I was gonna do the lines! Haha. Thx Carnal!!! 👍🏽👍🏽👍🏽 -Sam.

Great job. Nice and easy, congratulations guys!

Bro! This was amazing! Thank you for the straightforward video!

I would just screw a 4 inch spacers to keep the 2 x4 on the right width! Great video thanks 😊

Great Video! I wondered why contractors did not use a simple paint spraying machine that's not a line sprayer. I have a Graco x7 that I wanted to keep in the trailer/truck hooked up to a quiet generator for my lines. Your video shows it's doable. No big money equipment but still great results!

That was fancy! I'm thinking of starting this business.

That turned out really nice looking!

My Latino brotha, Much love. I'm stressing trying to start out and thought I needed that big as a machine for these Thank you

Looks good to me. Very resourceful 👌🏼 Appreciate it brotha

Nice video mate. I think a way to speed things up might be to cut Timbers to the length of the lines needed so you don’t have pick up and move them to finish. One long piece for each line. Great video bro

Great video guys, thank you

You're the man! Thanks brother 👍

I have done several parking lots but I have always just free-handed it. I've never used line snaps,tape measures or anything like that. I usaully use a paint roller on a stick and drag around a paint tray I can do 500 space parking lots by myself in one day.

Very useful information. Thank you will try next week ..

Awesome been looking into doing this great tip

Love the video

Do you recommend a specific type of paint for this and paint gun setup? Liked the content

Easy, simple thanks

My dude!!!! Great video!!! Bro, how do you paint around the curbs and fire lanes?

Great video bro!

What type of paint and what size nozzle, good job on the video, thank you ✔️

Thanks..GREAT JOB!The 2x4 planks a great idea!qQWHICH PAINT QWHICH ,ACHINE? CHEERS DIY!

built my own using a generator an airless spray unit a trolley and made all stencils arrows lines etc built for less than a grand and paid for itself 20 times over

Great video David, How are you doing curved lines?

what machine are you using to spray the paint. How much do you charge per line?

Longer 2x4 duh, and connect the 2 damn boards exactly 4 inches apart so it's a stable jig. Then just go from spot to spot...

Can I ask around how much you made for that job ? Looking to do this out here in Cali

Thanks about to apply this technique

What kind of paint would I need for asphalt?

Very neat

What kind of paint sprayer are you using?

What brand of paint are you using

What if the ground the ground is uneven?

Hey I see you’re spraying with a long hose what set up are you using please

Nice man

Bad ass brother. Smart work not hard 👍👏👏👏

Wish I watched this video sooner 😅😅 used rust oleum machine but have to go twice on it

Does this work?

Without?

what do you charge

How much do you charge per line? Or per parking lot ?if so how much did you charge for it

Will a Wagner be alright? And what paint did yall use?

i saw a video where they used tape and a roller... but this way is way more efficient!

can someone explain to me what he used?

What type of gun is that called so i can look it up please? I want to invest

Maybe bolt the 2x4 together so you have a solid piece template?

What type of air sprayer did you use, I’m starting my parking lot business and need your help!! Thanks

Yall just saved me some money from buying a machines since I have smaller jobs

The paint used for striping is slod by Sherwin willams its called traffic striping paint it comes in 5 gallon pails and usually its wise to thin it down slightly and no a wagner paint sprayer wont work it needs to be a proper airless paint sprayer with the correct painting tip . a roller does a very sloppy job . if you know how to setup your paint sprayer you have 0 needs for 2x4 boards unless your doing crosswalks or stop lines or arrows .

How much did you charge for a job

What can I charge per linear feet? What's fair?

Hello friend, I like your work, it is very good. He wanted to know what machine he used to paint. Thank you.

Nice

How much charge per line

Cómo le haces para en contrar tus clientes

Very dope

That probably takes so long to complete. Worth it tho when ur just starting

2x10 for efficiency maybe?

What you make on that deal

Smart 😊

are you using a "basic" airless paint sprayer?

What about the handy cap😊

Ok anyone can do this i want to know how to do handical loading zones lol. But really, i appreciate the video.

What kind of paint are you using?

I do the same job in Kuwait 🇰🇼

La Raza !👍🏻

👍

what's ur equipment to do this?

What type of sprayer are you using?

Where do you get the paint from?

Sending to property management for a request to paint two or three parking lines, so I can see to park at night or in winter and make the line far enough from my car on each side, for the next car not to park too close. I need space to open my doors all the way in order to get my rolling cart close enough to put bags into the rolling cart to roll in. Love your simple and inexpensive technique, I think might get this done at very little cost to the owner.

The scotch is best for this!?

That’s cool… if you wanna spend all day doing a small parking lot and make no money😮

Work smarter not harder

Use 12 ft 2x4s 🤷‍♂️

Boards are great but 1x4 are much lighter and just as effective. And get a good used machine. I can stripe that pushing my machine in the time it takes you to do 8 lines. I’m not hating but I think when you get one you’ll love it

Looks terrible. Chalk that and tell me it’s level all the way up

2 hour job just to paint 5 lines rookie shit