Stripping the old wiring harness out of our DSM
Рет қаралды 1,429
2 жыл бұрынFinally got down in the shop and got the factory engine harness out of the car. This is all in preparation for our new Kinnettic Kreation plug and play harness for our srt4 platform and haltech standalone ECU.
@LNRRidez 2 жыл бұрын
Coming along nicely. Glad to hear your getting the cherry picker up and running!
@joelsanchez5491 2 жыл бұрын
Thats going to be a sick build man.. can't wait to see the finished of it.
@edenmuhass3417 2 жыл бұрын
Kinetic makes amazing plug and play harnesses. But since Neon owners as well as DSM owners are *always* broke due to repairing their cars, I was forced to make my own. I did use "Mil-spec" Tefzel wiring and DR-25 heatshrink. Sounds intimidating, but if you have a harness to start with, it's not difficult. The Tefzel also cuts the size of the harness down to ~.7 inches total and drops ~10lbs from the weight of just the harness. This option cost about the same as a Kinetic harness though. I have a 99 Spyder and a 98 Neon coupe so I'll definitely be following along.
@jarrettbeckwith6821 2 жыл бұрын
so it take it im not getting the transmission harness T.T
@NITROKID98 2 жыл бұрын
The connector was dry rotted, it couldn’t have been used.
@tigwelding123 2 жыл бұрын
💪👍💯
@ZKrow382 7 ай бұрын
Hey wanna know more about the wiring harness process, can I message you on instagram? Need some guidance.
SuperfastMatt
Рет қаралды 1,3 МЛН
LegitStreetCars
Рет қаралды 336 М.
Emperor Gsx
Рет қаралды 2 М.
Garage 54
Рет қаралды 4,2 МЛН
Technical Asif
Рет қаралды 2,1 МЛН
SENIOR WELDER
Рет қаралды 2,4 МЛН
Eidan Sanker / Don’t Touch My Car
Рет қаралды 18 МЛН
AutoRegionBA
Рет қаралды 2,8 МЛН