Stronger and Faster: V8 Solenoid Engine

Рет қаралды 202,871

4 жыл бұрын

In the past I have made a 1 cilinder solenoid engine and a V4 solenoid engine. They turned out really cool, but today I’m going to improve on it by making a V8 solenoid engine.
To improve it I not only double the amount of solenoids I’m also going to make the crankshaft on my cnc mill and use infrared sensors for the switching of the solenoids.
Specs:
- Voltage: 12V
- Spool wire used: 0,4 mm diameter
- Estimated wire length per spool: 40 meter
- Spool resistance: 5 ohm
- Max rpm measured: 1000RPM
Want to support The Practical Engineer? Get exclusive BTS and extra content:
/ thepracticalengineer
For more projects, build plans and other stuff:
www.thepracticalengineer.com
Check out the gear I use and recommend here: kit.co/ThePracticalEngineer
Also check out my other social media:
Instagram: / thepracticalengineer
Facebook: / emielthepracticalengineer
Twitter: / prctclengineer
Pinterest: / practicalengineer

Пікірлер: 489

@don_pavlov 4 жыл бұрын

As long as the subtitles are great I am happy in any language.

@Thepracticalengineer 4 жыл бұрын

That's great to hear! thanks!

@brianljh8982 3 жыл бұрын

Yes, as long as there is captions, im ok with it.

@MarkR-wc2el 3 жыл бұрын

Subtitles also have fails

@balbonits 2 жыл бұрын

same. as long as the subtitles can accurately convey what you want to say, I'm good with it.

@Recked4Selfmarv 4 жыл бұрын

I'm from germany and I am always amazed how much I understand when someone speaks dutch.

@klein320 4 жыл бұрын

ReckedOne Wenn du aus der Schweiz kommst verstehst du noch mehr!

@Thepracticalengineer 4 жыл бұрын

Haha cool to hear! it is the same the other way around. I lived in germany for a bit some years ago and I learned to speak it by just listening and then starting to talk the words I knew and fill it with dutch words with a german accent. People usually understood me

@unknownknife4993 4 жыл бұрын

i take classes and realized that there is to much more to learn

@johannesn.4674 4 жыл бұрын

Plattdeutsch aus dem Münsterland + etwas Logik ~ Niederländisch

@mr.redrhino4929 4 жыл бұрын

Was ist "Dutch" auf Deutsch?

@WorksbySolo 4 жыл бұрын

Wonderful project! The Dutch works good. NEW T-SHIRT IDEA: “Don’t have a lathe?... Go buy one!” Love it!! :-)

@Thepracticalengineer 4 жыл бұрын

Thanks Bernie! Haha that'd be awesome on a shirt 😂

@JohnMadeit 4 жыл бұрын

That made me laugh 😆

@BearMaked 4 жыл бұрын

Haha, I was going to say something very similar, Bernie!

@Sychius 4 жыл бұрын

While I can't understand or speak a word of Dutch, seeing you enjoy this vid so much makes it totally worth it. I say stick with Dutch. While I'm not personally a fan of reading subtitles usually, I can make an exception for your vids :P

@Thepracticalengineer 4 жыл бұрын

Thanks Sychius! That is exactly the reason for switching for me. I think the extra joy translates into the video and makes it better overall.

@SonicBoone56 Жыл бұрын

This is the coolest thing ever. Imagine if electric cars used this as a novelty engine for enthusiasts or restomodded classic cars.

@SumbAsd Жыл бұрын

Hey, what if I said im trying to make that a thing? Well, atleast the electric cars using them.

@CardboardSliver 4 жыл бұрын

I was looking up old V8 engines when I stumbled across this. Nice work mate, that's some serious craftsmanship!

@calvinb2408 Жыл бұрын

I love when you have an idea, think it’s original, then find out it’s been done in this guys garage. Good to see it work as imagined.

@emi3966 4 жыл бұрын

Definitely keep spontaneity and subtitles, definitely works. Keep up the good work. Thank you.

@etiennedupreez8110 3 жыл бұрын

Hi, I love the videos! I am South African, and apparantly Afrkiaans and Dutch are similar, because i could understand most of the words you said!

@RegularOldDan 4 жыл бұрын

Very, very cool. Honestly, it was not only fun to see your work but also to listen and see how many words are similar to English. Keep it up!

@djjoris 4 жыл бұрын

Ben naar hier gestuurd door Henk Rijckaert "De Koterij" en natuurlijk heb je een sub bij.

@reinoutghijs6469 4 жыл бұрын

Ik ook!

@Thepracticalengineer 4 жыл бұрын

Bedankt! Er komen een hoop leuke projecten aan ;)

@idevant 4 жыл бұрын

En ik kom ook van bij Henk ... Toppie

@ti83magic 4 жыл бұрын

Idem :)

@soetens1986 4 жыл бұрын

Check, via Henk....

@UraFlight 3 жыл бұрын

Amazing staff ! I was very glad to find your channel

@theguyofthemonth 4 жыл бұрын

This is an amazing project, nice job! 👍

@s4nt497 4 жыл бұрын

That sounds so cool. Amazing work dude!

@Thepracticalengineer 4 жыл бұрын

Thanks! It does sound really cool!

@dutcheeseblend5458 4 жыл бұрын

Gaaf! Mooi project! Je bent goed bezig, ik geniet elke keer weer van je video's 👍

@Thepracticalengineer 4 жыл бұрын

Thanks Daan! Leuk om te horen :) Deze was ook wel erg leuk om te maken.

@Ariautoace 4 жыл бұрын

Dude. No amount of words can describe how amazing this is; in any language. Just wow.

@Thepracticalengineer 4 жыл бұрын

Thanks! That's awesome to hear!

@JohnMadeit 4 жыл бұрын

Nice work. This is absolutely amazing

@Thepracticalengineer 4 жыл бұрын

Thanks John! This is one of those projects that turned out so nice that I can just sit and watch it.

@bramkel 4 жыл бұрын

Ik ben hier beland door De Koterij van Henk Rijckaert. En ik moet zeggen: dit is geweldig! Heel fijn om naar te kijken en zeer leerrijk! Groetjes uit het koude België

@Thepracticalengineer 4 жыл бұрын

Hey, Welkom! Leuk om te horen dat je mijn content leuk vindt en dat je hier door Henk komt!

@RazzaDazza0 4 жыл бұрын

I like the idea of you switching to Dutch because it is easier for you but I would prefer if you instead spoke in Dutch and made a dutch version of your vid but in the same vid you did a voiceover in English and uploaded that instead so that way everything is still fast and you don’t have to think before you speak but English speaker fans can still understand you and listen without having to resort to subtitles, I understand that is more work for you though.

@Thepracticalengineer 4 жыл бұрын

Thanks for the suggestion. I see your point and I have been (and still am) thinking about ways to also incorporate the international public. I do indeed have limited time so right now I'm focussing on this change. When that is established I'm going to look for the other options

@FredMcIntyre 4 жыл бұрын

Really cool Emiel, awesome work! 😃👍🏻👊🏻

@Thepracticalengineer 4 жыл бұрын

Thanks Fred! Glad you like it!

@BleughBleugh 4 жыл бұрын

Do the videos in whatever language you like! I can read English and will watch regardless. Superb entertaining engineering, your enthusiasm rubs off onto others for sure!

@Thepracticalengineer 4 жыл бұрын

Thanks! that's cool to hear!

@starfunsfs7730 2 жыл бұрын

Wow beeindruckend Gut gemacht

@bastiaanwesterbeek1775 4 жыл бұрын

Super vet!!! Dit inspireerd mij heel erg om zelf ook dingen te maken!😍

@Thepracticalengineer 4 жыл бұрын

Leuk om te horen! zeker doen :)

@richardfox5364 3 жыл бұрын

I just found your video. IT IS AWESOME! Subscribed and liked.

@ChrisTheGregory 4 жыл бұрын

If speaking Dutch is more comfortable, I say go for it! I also like having subtitles instead of a voiceover or dubbing, because hearing the words while reading the translations is a great way to start learning to understand a language.

@Thepracticalengineer 4 жыл бұрын

That is very true! As a kid I was always watching english movies with subtitles to learn to speak the language :)

@timadamsart 4 жыл бұрын

Weer een pracht video afgeleverd Emiel! Leuk dat je ook bent overgestapt naar het Nederlands👍

@Thepracticalengineer 4 жыл бұрын

Dankje Tim! Ja, het was even wennen, maar ik ben er wel van overtuigd dat dit beter is. Het bevalt mij in elk geval erg goed!

@FrenkJanse 4 жыл бұрын

Superleuk Emiel. Hier ook een fan van Adam Savage. Erg fijn om te zien dat je ook je foutjes laat ziem. Subbed !

@Thepracticalengineer 4 жыл бұрын

Leuk om te horen Frenk! Ja foutjes maken hoort er bij :) Een goede maker is goed in problemen oplossen, niet in alles in een keer goed doen ;)

@ThaboW11 2 жыл бұрын

Great stuff.

@dilipsolanki786 4 жыл бұрын

You don't know , how much I love this engine

@firdauszainudin7118 2 жыл бұрын

JerryRigEverything Dutch style. Love your content, man.

@wachindeboca149 4 жыл бұрын

Hola! No se si lo recuerdas pero hace un tiempo tenias una gran comunidad que hablaba español, soy de los pocos que siguen aqui y queria decirte que me encanta tu trabajo

@thetinkerist 3 жыл бұрын

Emiel kerel, je bent een held, erg mooi werk

@Thepracticalengineer 3 жыл бұрын

Dankjewel! Leuk om te horen :)

@Tinkerz 4 жыл бұрын

Dutch works fine especially given your explanation of why it's being done in Dutch. Thank you for the video!

@Thepracticalengineer 4 жыл бұрын

Awesome! Glad you like it

@maxvanderhelm 2 жыл бұрын

wat een super vet project.

@ManCrafting 4 жыл бұрын

Very cool project Emiel! Enjoyed watching this in-spite of the fact I’ll likely never attempt this. Really enjoyed hanging out and chauffeuring you around in Atlanta. As for Dutch. I grew up watching Chinese martial arts films. All sub titles. I adjust relatively quickly. It might be fun to have a Brit to overdub one of the videos as a collab. 🤣

@Thepracticalengineer 4 жыл бұрын

Hey Chad! Glad you don't mind the videos being in Dutch. After being around the cool international community last week I had some doubts. But it seems to be all fine. It was nice meeting you and hanging out at WorkbenchCon!

@bestbuildpc 2 жыл бұрын

Amazinggggggggg! I love it!

@InfernosReaper Жыл бұрын

I had this idea myself, but lacked resources. It'd nice to see it working.

@DodgeVendetta Жыл бұрын

Tof project man, groetjes uit België. (perfect te verstaan) :b

@Thepracticalengineer Жыл бұрын

Haha, gelukkig maar!

@MrZeroinside 4 жыл бұрын

Nice work jerry

@PeterLunk 3 жыл бұрын

Ontdek net pas je kanaal... En was juist blij verrast iemand te zien die in het Nederlands zijn videos maakt. Ik spreek zelf prima Engels dus wat dat betreft maakt het mij persoonlijk niet uit. Maar ik vindt het wel veel educatieve waarde hebben juist voor Nederlandse jongeren die de engelse taal niet goed machtig zijn. PL.

@Thepracticalengineer 3 жыл бұрын

Hey Peter! Sorry voor de veel te late reactie! Leuk om te horen! Ik vond het zelf inderdaad jammer dat er maar zo weinig nederlandse makers zijn vandaar dat ik de switch gemaakt heb.

@favouremmanuel8876 3 жыл бұрын

I'm sad you said Electronics is boring.. it's very interesting for me and an awesome course... Though trouble shooting problems can be a hassle for some people, but it's also a nice time to learn alot..

@henkrijckaert 4 жыл бұрын

YES! Een ander maker-kanaal in het Nederlands! Cool project, Emiel!

@Thepracticalengineer 4 жыл бұрын

Hey Henk! Jaaa! ik ben heel blij met de switch! Dankjewel, het was een hoop priegelwerk, maar was het zeker waard!

@kemdust 4 жыл бұрын

Henk, je weet nu wat te doen, ondertittels in het engels.😁

@oenieke 4 жыл бұрын

Prachtig compacte werkplaats :) En boeiende content ... dubbel op ! :)

@Thepracticalengineer 4 жыл бұрын

Kijk dat is leuk om te horen! Ja de werkplaats is zeker compact. Dat is soms best een uitdaging met filmen

@oenieke 4 жыл бұрын

@@Thepracticalengineer meer doen met minder, knap

@mel_163 2 жыл бұрын

mate this is a wonderful project, i am so curious about these engines i want so much to build one of these and test it, maybe even trying it on a rc airplane

@eexmann 4 жыл бұрын

Heel fijn dat ik je gesproken woord helemaal kan volgen, sommige Engelse termen staan niet in mijn persoonlijke woordenboek, dus bedankt.

@Thepracticalengineer 4 жыл бұрын

Graag gedaan! Ja zeker de technische termen kunnen wat verwarrend zijn. Het bevalt mij prima in het Nederlands :)

@RickTizzy 4 жыл бұрын

your english vids are just as great! Die hebben ook mijn vookeur in alle eerlijkheid :D

@Thepracticalengineer 4 жыл бұрын

Dankje! wat maakt dat die de voorkeur hebben?

@RickTizzy 4 жыл бұрын

@@Thepracticalengineer Omdat je het vraagt dan... Nederlands is naar mijn idee over het algemeen een nuchtere en soberder taal. In het engels kom jij dan ook veel expressiever en levendiger (en daarmee toegankelijker) over is mijn mening. Als je dat zou proberen over te nemen in het nl dan zou het denk ik gemaakt over komen ipv de enthousiasme die je in het engels overbrengt. Hoe dan ook, je content is nog altijd erg vermakelijk ongeacht de taalvoering, dus doe gewoon lekker je ding en waar jij je comfortabel in voelt zeg ik. Dan hebben we er allemaal lol in :D

@Ernzt8 4 жыл бұрын

Ik vind het een prima keus om het in je moerstaal te doen, je geeft zelf de reden al aan waarom. Met goede ondertitels is het toegankelijk voor iedereen, een extra versie met Engelse voice over zou ook nog kunnen. En o ja, die nieuwe draaibank zet ik gewoon in de woonkamer ;)

@Thepracticalengineer 4 жыл бұрын

haha, ja de woonkamer lijkt mij een prima plek ;)

@BearMaked 4 жыл бұрын

I don't mind the subtitles. And I have no idea how any of this project works (no engineering experience at all for me), but it was fun to watch you build it!

@Thepracticalengineer 4 жыл бұрын

Hey, That's great to hear. i'm glad you enjoyed it

@xavimourelo 4 жыл бұрын

Don't worry about switching languages if you are more comfortable, I don't know dutch but I enjoyed the video, so if you did too while making it that's even better :)

@luchoportuano3272 4 жыл бұрын

Im from México and I like your videos, it does t matter the language

@Thepracticalengineer 4 жыл бұрын

Thanks thats great to hear!

@artuur1820 4 жыл бұрын

Nice man!! Groetjes een belgische kijker!!

@Thepracticalengineer 4 жыл бұрын

Hey Welkom!

@alexflipper9356 4 жыл бұрын

I dont understand but I like the video

@Ahmedqamislo 4 жыл бұрын

alexflipper 935 you can use subtitles

@Thepracticalengineer 4 жыл бұрын

Glad to hear that you like it. I have added english subtitles to the video to help with that.

@alexflipper9356 4 жыл бұрын

Thanks 😂

@Rouverius 4 жыл бұрын

Supergaaf! Great job!

@Thepracticalengineer 4 жыл бұрын

Dankjewel Rouverius!

@pieterbonten7301 4 жыл бұрын

Henk crew, ook echt een super nice video

@Thepracticalengineer 4 жыл бұрын

Hey! Wat gaaf dat je via Henk bij mij terecht gekomen bent!

@eatenkate 4 жыл бұрын

Conclusies: 1) Je bent nóg gezelliger in het nederlands 2) Zo leer ik eindelijk ook eens wat al die dingen in het nederlands heten, ik leer alles over hout/metaal/CAM van youtube, in het engels en woon al meer dan 10 jaar in het buitenland en dan pik je niet zo makkelijke nieuwe nederlandse woorden op, dus ben superblij dat je dit doet!

@Thepracticalengineer 4 жыл бұрын

Dat is goed om te horen! Ik ben er zelf ook erg tevreden over. Ik leer zelf ook het meeste online, dus ik zal ook af en toe wel wat specifieke woorden moeten opzoeken ;)

@nailsaggitarius4212 3 жыл бұрын

Very good! two questions: 1) How to make solenoid stronger 2) how make solenoid moving in steps

@Makebuildmodify 4 жыл бұрын

Heel fijn! Hou ervan!

@Thepracticalengineer 4 жыл бұрын

Goed om te horen!

@user-vr8xv5jz7r 4 жыл бұрын

Je Nederlands is helemaal top

@capitalz6566 3 жыл бұрын

Echt een dikke werktplaats man 👌👌👌

@Thepracticalengineer 3 жыл бұрын

Dankje! Ik ben er ook heel blij

@thewizard1196 3 жыл бұрын

This in my 1/14 scale rc semi 👌🏾

@owenroth5686 4 жыл бұрын

I speak English but subtitles won't stop me from enjoying these videos

@Thepracticalengineer 4 жыл бұрын

Thanks that's good to hear

@mandog2142 4 жыл бұрын

Zeer innovatief! En cool.

@Thepracticalengineer 4 жыл бұрын

Dankjewel! Ik ben er ook heel blij mee hoe hij is geworden. Het is een mooie eyecatcher

@akal1k0 3 жыл бұрын

Do you have a way of measuring how much torque its producing? If you added a drivetrain and wheels, could it move? Looks awesome btw!

@safetyinstructor 4 жыл бұрын

I don't mind you switching to Dutch since I as a German can still understand it. Keep up this great content! 👍

@Thepracticalengineer 4 жыл бұрын

Haha, It works the same the other way around! Being Dutch I can follow most German conversations

@louloutb56 4 жыл бұрын

Bravo superbe travail .

@Thepracticalengineer 4 жыл бұрын

Thanks Jean Louis!

@victormanuelhernandez457 4 жыл бұрын

12:01 Nice job. your face of satisfaction and happiness haha greetings

@WJCTechyman Жыл бұрын

I got the gist with just watching your video as I could figure it out. That said, I'm not experienced in Germanic languages besides English as most of my experience living in Ontario, Canada so we are more exposed to the Romance languages (particularly French and Spanish). Ironically, I'm 3/4 German heritage, since three of my grand parents were of German heritage by their family or maiden names. I digress, I felt a bit of pain watching your endmill bit snap and thinking of times where I've had that happen with drill bits boring into metal. I've always liked the sound of these engines as they kinda have that Diesel or fast rotating steam engine sound.

@kiraditt523 4 жыл бұрын

I love that your doing videos in Dutch since I'm trying to learn it slowly and I can somewhat understand it cause German. And subtitles are fine for the rest. However maybe put the subtitles In the video directly since how KZfaq does It, it Sometimes covers important parts. And it would be really great if the timing and splitting were a bit better since it's really hard to follow like this at the moment. I don't know how your currently making the subtitles but if you're in need of a good program Aegisub is really good. I can't see if you have it enabled or not but I think there is an option for the community to create subtitles in KZfaq.

@Thepracticalengineer 4 жыл бұрын

Thanks for the elaborate answer! I'm working on improving my subtitles. I did them myself this time and it can be quite the challenge to get all the timings right. They will improve in the future.

@Nix_sound 4 жыл бұрын

Cool video. Dutch is no problem if we have subs, I'd rather have more content, so I'm happy to watch

@svenmagnusflubiproducties 4 жыл бұрын

veel succes met het Nederlands!!

@Thepracticalengineer 4 жыл бұрын

Dankje! Gaat best oké toch?

@SwiftsReborn 3 жыл бұрын

The subtitles are great, had no issues. id say speak a language you're most comfortable with

@ddpgokchinees839 4 жыл бұрын

Nederlandstalige maker video's zijn altijd een aanrader

@Thepracticalengineer 4 жыл бұрын

Goed om te horen! Ik hoop wat bij te kunnen dragen daaraan

@ddpgokchinees839 4 жыл бұрын

@@Thepracticalengineer Dat is je bij deze alvast gelukt. Bedankt

@brianbudd8487 3 жыл бұрын

How hard would it be to scale up and use mass produced parts like the connecting rods for a weedwacker or model aircraft engine parts?

@estebanprieto6574 4 жыл бұрын

Hi, how are you i hope you're fine. I would like to know if this kind of engine is more and ic engine or a electric engine as his power efficincy by constances at rhe rpm, also by all his moving parts and also if it can mount gearbox or its unnecesary

@embain269 4 жыл бұрын

I'll keep watching either way, your projects speak for themselves, one small request, dont talk so fast if your gonna switch I can't read that fast, lol

@Thepracticalengineer 4 жыл бұрын

Thanks! that is nice to hear! I'll do my best to slow it down.

@seunghoonkang5613 3 жыл бұрын

Your video is touching. What kind of product did the infrared sensor use? Recommend the link.

@EPJXM Жыл бұрын

what kind of part are you using to control the motors? (the mosfet part)

@dorenzahid5244 4 жыл бұрын

This guy is like the solo hacksmith

@TheIrishdriven 3 жыл бұрын

Can you set it so that polarity of rack solenoid switches so that it pushes and pulls that would increase efficiency torque and balance

@o.schavemaker5615 3 жыл бұрын

Geweldig! Heb je ook de plannen/bestanden om het zelf te kunnen maken?

@Rafael-ko1cb Жыл бұрын

The only problem I had was that the subtitles were really, really off in terms of synchronization. Apart from that, you may speak in the language you want, because your content is super cool.

@Thepracticalengineer Жыл бұрын

Whoops, this was the first one where I wrote the subtitles. They are a lot better now someone else makes them.

@WillaLamour 4 жыл бұрын

Awesome!!!!!

@Thepracticalengineer 4 жыл бұрын

Thanks!

@crashweasel 4 жыл бұрын

Much love of a ' de koterij' viewer :)

@Thepracticalengineer 4 жыл бұрын

Hey thanks! welcome to the channel.

@afiqkarnain 3 жыл бұрын

man, you really made it, v8

@DennisRayWingo 4 жыл бұрын

Very interesting! Question. Did you do any diagnostics on this to see what the current draw is on average for the system?

@Thepracticalengineer 4 жыл бұрын

Hey, Thanks! each solenoid pulls about two amps or a bit more. there are always two solenoids engaged at the same time, and sometimes 4 so it draws between 5 and 10 amps

@PrintThatBoii 4 жыл бұрын

Omg ik wist dat je nederlands was maar het verschil om je van het Engels naar het Nederlands te horen praten is ik weet Ni hoe grappig maar ook geweldig. Was even aanpassen 😅😄 van waar kom je als ik vragen mag 😅 land, provincie 😀

@Thepracticalengineer 4 жыл бұрын

Haha! Ja het was voor mij ook zeker even wennen, met het filmen, maar ook zeker met het terug kijken. het voelde wel heel goed om het in het nederlands te doen :) Ik woon in Noord-Holland

@Josh_Luijsterburg 4 жыл бұрын

Inderdaad Emiel, je bent nog enthousiaster en spontaner. Houwen zo 👍 wat een gaaf project. En was ‘M’ blij met haar ‘M’? 😉

@Thepracticalengineer 4 жыл бұрын

Haha het was vooral een testje, maar Mandy was er erg blij mee :)

@PROGAMER-qm7lu 2 жыл бұрын

What's the difference bw copper wire and insulated copper wire ???? And also what kind wire is used in motor coils ???? Is it insulated copper wire or just copper wire

@MrCrankyface 4 жыл бұрын

Great project! I can really relate to the spontaneous thing with the languages. I also feel like I get constrained or "stiffened up" when talking in English. I find it a bit harder to follow along when I have to constantly read subtitles though.

@Thepracticalengineer 4 жыл бұрын

Thanks for your feedback. I think a non native language will always have a bit of a barrier compared to native.. What would make it easier to follow it for you?

@leshyborovoi 4 жыл бұрын

The time for the subtitles are to short. There is not enough time to see the actual process.

@lis6502 Жыл бұрын

I didn't understood a word, however 12:01 does not need any language to pass meaning :D. Great job!

@Thepracticalengineer Жыл бұрын

Thanks! There are subtitels btw

@pandab34rYT 4 жыл бұрын

Cool video! It's just as easy for me, someone that doesn't speak Dutch, to watch with subtitles. So many of the words are so close to English anyway and just pronounced a little different :)

@Thepracticalengineer 4 жыл бұрын

Thanks! Glad to hear that :)

@bricology 4 жыл бұрын

Another great video! Is there any way to measure the power the engine produces (in torque, fractional horsepower, Newtons, etc.)? Bij voorbaat dank!

@Thepracticalengineer 4 жыл бұрын

There are probably multiple ways. If I was going to do it I would put a wheel to it and see how much energy it generates when stopping it with the wheel. However I now measured it by hand and determined its not a whole lot.

@lukewakeling 4 жыл бұрын

This is awesome, keep doing them in Dutch! One question; how many hours did this take to make?

@Thepracticalengineer 4 жыл бұрын

The actual build was two or three days. Not counting the fact that I had to redo all the spools

@mienmoeke 4 жыл бұрын

Nederlands komt bij mij natuurlijker en prettiger over. Eventueel een voice-over in een 2e filmpje voor de Engels sprekende medemens zou een idee kunnen zijn.

@Thepracticalengineer 4 жыл бұрын

Goed om te horen. Bedankt voor de tip. Dat is nog wel een idee inderdaad.

@cogitoergosum3138 Жыл бұрын

COOL!😎

@c.a.g.1977 Жыл бұрын

Oeh, deze is ook gaaf Emiel! Kwam hier via het filmpje van je stoom-motortje dat je vandaag hebt gereleased. Dat roffeltje klinkt fijn zeg, het is bijna een benzine V8 😄 Heb ook wat van je Engels gesproken videos gezien, ik snap je keuze en je reden, maar wou je toch even meegeven dat je Engels echt meer dan prima is hoor! (BTW: Laura Kampf maakt haar videos ook in het Engels en gooit er af en toe iets van haar moederstaal doorheen, daar zet ze gewoon subtitles onder. Dat zou jij ook kunnen doen.) Met Engels bereik je toch misschien een groter publiek.

@Thepracticalengineer Жыл бұрын

Thanks! Nederlands is ook wel een stuk fijner om te doen, al heb ik ook wel door dat dat minder kijkers trekt.