Please don’t apologize for being too technical. Your instructional style and delivery is exemplary and flows very nicely through the various points. You’re a natural instructor. Personally I would rather know all there is to know, then when something isn’t working right, fall back on that knowledge to troubleshoot. I watched your Weber videos too (where’s the part 3?) and looking forward to the next in this series.

The technical content makes for better understanding and removes some of the myths associated with carburettors. Super!

The technical content is what makes your videos interesting and sets them apart from the others. Great learning channel. Thanks so much.

Too technical? That is the fun part. And thx for uploading on a friday evening as it blended well with my Laphroaig 😁

Without this amazing video I would never have been able to fix my car and get it running again! Love from little Anguilla.

Excellent video with a perfect level of technical detail - keep up this great work and anyone complaining about the level of information being too technical should remain ignorant by watching another channel.

More great info. If you want to do the job correctly then you need to understand the details. You explain this very well. Your example setup is a good indication of how it can go wrong when you just guess. Thanks again for your work.

Excellent video 👏,best one i watched in years,no crappy music in background,no ads,watched it from beginning to the end without getting bored, thank You 👍

Technical content can never be too technical. I learned a lot and enjoyed every bit of it.

I have a "SU Eliminator"" carburetor on my Harley-Davidson Shovel-head , i was looking for a tutorial to tun it since decade , and , here you are ! with this perfectly clear lesson ! Thanks

Thanks for another excellent video on the SU Carburettor. Really enjoying this series and looking forward to seeing the next one.

I'm a 30 year Porsche/BMW/Mini tech. Was working on my R53 Cooper S and a nice retired couple saw me and asked if I worked on British cars. Went over and they had a 1959 Morris Minor is pretty good shape. Motor rebuilt a few years ago, but never dialed in. Running rich, bogging out on hard acceleration. I grew up rebuilding Webers and Solex. Never worked on an SU. Thank you for expanding my knowledge base. I appreciate your style.

Thank you for a very interesting video. When I was an apprentice telecommunications technician in 1971 I owned a mk1 Triumph 2000 with overdrive on 3rd and 4th gears. It had two Stromberg carbs, which are very similar to the SU examples. The mechanics I talked to suggested I use 3-in-one household oil for the dampers. I checked the oil level regularly. It wasn't necessary to adjust the twin carbs in the time I had the car. I sold it when the top gasket blew. The top was skimmed, but after about 1500 miles it blew again. That meant the block would have to be skimmed, which meant a complete engine overhaul. I had a new head gasket fitted and traded it for a brand new 1973 Datsun 1200 GX.

Great tutorial! You explain it in such detail. So very perfect.

Engaging factual descriptive content without waffle. Outstanding video and sound

The more people watch the videos the less technical the videos will become for people having issues. Really enjoying the content like I did with the DCOE carbs. Keep up the great work. Jim 👍😀

Your videos is amazing. I've read about carbs for years as i have a inline 4 carbs Yamaha xj650, a saab V4 (now with a weber, which makes more sense to me), and lately a clubam 71 with a SU HS4. But never before did i find as good explanations as on your channel. It really helps me understand the last bits i was missing. Thank you so much for your great work. And obviously i'm subscribing and pinging this channel. Best Regarrds /Johannes

Just rebuild my HIF44 on a 1.6 Vitara G16B in a Suzuki samurai, can't thank you enough for the videos, couldn't have done it without these, great work 👍

Nicely made and great quality of both the video and the instructions. I learned a ton and can think of 150 questions for you. Thank you.

Thank you so much for posting this fantastic video. It has given me the confidence to totally refurbish my HS2 carburetors 👍🏼

i have recently found your video's and they are excellent. You ned the technical to fully understand. Your tone and speech are excellent for learning. Very well done.

Another excellent video. Learning so much here. I am about to start my rebuilt A-Series engine in the next few days and this has given me so additional info to check before starting it.

I think it is the best video Ive ever seen on KZfaq- thank You for sharing the knowledge !

Although i haven't fiddle with a carburetor since fixing a vespa moped back in the 80s, your videos are very interesting and informative!

VERY INFORMATIVE! I've watched this countless times and can't wait to see what I have... MAC10031 WK 41 93 in a MINI titled 1977. Thank you for pointing me in all the correct directions.

I don’t have a SU carburettor however this has been incredibly interesting, please please don’t apologise for being to technical after all this is learning! Thanks to your video and some information from auto data carburettor manual I’ve been able to setup my infamous Varajet 2 carburettor, I just need to make my own vacuum gauge to measure the small amount of vacuum I need to set it up to for it to be as near perfect as I can get it (my vacuum gauge is hard to read for small amount that I require 100mm H2O is 0.28 inHg). Also I wanted to say thanks for the information on the Air fuel ratio gauge I looked at these before to use as a setup guide rather than using a garage exhaust gas analyser, the research I done off the back of your video has showed me that the air fuel ratio Co, co2 and hydrocarbons are all linked together so I’m now confident that when I take my car for its MOT (annual inspection) it should pass the emissions. So a big thanks again! Sorry for the long comment, I wanted to show my appreciation 😃 thanks you. Steve.

Brilliant series of videos. Don’t listen to the knockers. They could do the proper thing and just move on. For me, the level of detail is perfect to gain a better understanding of these undervalued carburetors

Always an outstanding video and presentation.

Thanks for the detailed explanations. For anyone who wants to know, the popular 3-IN-ONE oil is SAE 20. I use in my SU HS2s mounted in '60 Sprite. Cheers!

Thanks for great videos!! You helped me get my Reliant Rialto from a rusty heep to fully MOTed and tuned up! 😊

You make it so easy to understand, thanks!

You're awesome. Love all of your videos.

Thank you very much. This is just perfect!!!! And if somebody think this is too technical, then they need to go somewhere else. The teaching is just perfect.... thanks again

Please keep it technical! It's really interesting and we learn so much!

You have the best video of explication on a carburator hid 44. Merci

Great video and very informative just what i needed to get a base line on my Rover P6b.

Loved the video it was perfect and now very understood how to tune this carb for initial run ty for your time in making this video it is very much appreciated.. I got a mini into my shop today and it was running like dog .... I didn't watch the video but I have tuned the carb and changed the spark plugs and the car is running smooth but I would like to take it apart and retune the car it smokes a lot while driving but but I'm thinking it's more than the car running rich maybe rings or valve stem seals I'm going to change the seals since it's the easiest and will go from there thanks again

I must agree completely with G Bhoday, who so eloquently described my exact sentiments. Thank you, to you both.

This is an excellent video.

That was wonderfully explained

Your knowledge in mini is absolutely amazing. I wish you were close to where I live so I could get your help in perfectly tuning me hif44 carb and the engine. I have my first mini and have no idea whether it drives as it should because I have no reference. Below is my engine spec : * Head: KAD 12G940 ROAD100 CYLINDER HEAD * Cam: KAD100 Camshaft and single HIF44 * HIF44 * BDK needle * Lightweight flywheel * Pre verto clutch - performance clutch * 1275 Metro block bore to 1310 + 5 speed manual trans. Looking at my dashpot spring, it has no marks or color so I don't know what spring is in it. It had a cone filter but because it was so noisy to drive this car, I placed an original mini round filter box to help with the carb noise in the cabin. The car was very smelly and gave me a head ache when driving, but after seeing your video I got a colortune and fiddled with the mixture and it is better now, but still have the smell in the cabin. How can I make sure this car is optimally tuned at all RPMs? Also does a richer mixture mean more torque?

A great video, and soo well explained . Thank you

Fantastic video and thank you for being technical

You make the best video's im here for your knowledge

Well done again mate👍

Superb video. Thank you so much.

This is perfect. I just picked up a Volvo with an SU carb and was looking for more info on it

A suggestion: after you assemble the piston and Spring inside the bell and screw the bell down you may want to use the lifting pin to lift up and drop the piston a couple of times to make certain that it isn't sticking on the inside of the bell. If it does stick you may have to shim one of the tie down screws on the bell to relieve the piston so that it falls freely otherwise it would be difficult to turn the carb properly.

I have looked at the web site, the one you show the needle graph. would this also work well for an old type of su carb?, I have a 1.1/2 carb fitted in a 998cc mini . I think the needle is an AAC . I'm trying to improve the running of the engine. Any ideas would be welcome. Thanks

Hi - I have a 1340 mini cooper with twin HS2s - rally cam and ported head - what needles and springs would you recommend? Thank you

Hi, was the SU manual the source of all the detail you provided in this video? I'm about to recommission a pair of H4 carrbs on my 1275 Cooper S. Thanks for your comprehensive description of the issues I need to be aware of.

Excellent video. Tkank you

brilliant presentation well explained

Fantastic again.

It’s hard to add oil with the dashpot installed. It usually ends up spilling around the damper tube into the piston recess. Is this bad?

Just excellent and practical

Hi D3Sshooter, My 1974 MGB GT (UK) has different part numbers on her two SU HIF4: Front (tag: AUD616R): Suction chamber: PDC 12 A Piston: PDC 6A / AUC 1331 Piston damper: AUC 8103 Rear (no tag): Suction chamber: PDC 15 Piston: AUC 1331 Piston damper: AUC 8114 The piston damper on the front carb has a lot more friction than the rear one. As a result the piston is much harder to raise. Should I put an AUC 8114 piston damper into the front carb's suction chamber? Thanks!

How do you determine what carb. you have if the tags are missing. Mine is on a 1973 MGB Veh. number 301725, 18V engine

Great video - very helpful. One question please - where does the damper gasket fit??? Cannot find any videos of changing the gasket for my HD8 E-type

Very good content, You explain very well, I have an hif 44 & will now buy a reference book as i am curious what it came out of.

Very helpful video. When do you put the retaining clip on the piston?

Thank you for this. I inherited an 1959 Austin Healey BN6 with spare parts, including carbs. With your videos, I will be able to rebuild them, then having them available for future use. I will also can be a resource for the British Car Club.

Perfectly technical 👌🏻

At 17:53 minutes I see a chart from a , what catalog is that , the SU Books ?

A question sir, so my HIF44 carb didn't have the tag it was initially built with. What would be a good baseline needle for it? I am currently running a 1293 engine with 266 cam and of course the HIF44 carb. I did check all the electrical components and ensured the gap clearance on both the spark plug and lifters were set the to best setting possible. As well as checked the timing. I will be following your AFR gauge installation video. I think that will help me with tuning as there is no real mini experts to reach out to here.

I’m still waiting mini test after tuning 😢 where is part video

Do you have the link to your carb disassembly video?

Hi. I have twin su’s from a 46 2.5l MkIV Jaguar. When I remove my dash pot, there is no spring under them, and when I remove the vented brass cap (damper?), there is no rod. Is this just an early version of an SU, and do u still require oil in them ? Thanks

What kind of table vise are you using?

First I must say what an extraordinary teacher you are! Thank you for sharing your knowledge and experience. I noticed that this carb looks like it is designed for manifold vacuum. Why is this the case rather than having a hole inside the throttle plate for ported vacuum? I would have thought that on a Metro ported vacuum would be used. Thanks. Lin

Excellent explanation.......I love webers...... S.U seem old school/Alien.....but now you have explained it....they are very simple !

You're missing the wire circlip fitted in the groove at the top of the slide on the piston.

So, if i have learned anything so far, on the next drive i would expect the mixtures to be very similar but the damper oil should have stopped the initial lean on flooring the accelerator and smoothed out the graph in the top gear acceleration but still be too lean over all.. perhaps needing the BFY needle? Thanks again, i am enjoying this series on road tuning with the AFR and how the SU carby works.

Excellent video - not too technical, at least for me. Keep up the good work.

24:20 I'm glad that you mentioned the SAE spec of the oil. I worked for a UK leyland cars dealer - Austin/Morris, MG, Triumph, Rover, Jaguar etc. in the 1970s and there was a lot of confusion over what to put in the dashpot. Many people used 20/50 engine oil (obviously too thick) some used ATF fluid, I used 3 in 1 oil because the SU oil wasn't widely available. The thick engine oil did cause some problems in winter.

That was a very intimate intro...

Thank you very much for the video, it has been very educational. I have a Montego 1.6 with a SU HIF44 carburetor, it is quite difficult to start and runs poorly after spending a day stopped. The stepper motor is new. I understand that the carburetor circuit is empty of fuel. How could I fix it? I would appreciate some guidance. Thank you so much

I have a 1947 Bentley Mark VI, 4.25 with the H4 body and have no tags. Is there any other way to tell me what exact Spec number I'm running? BTW, great informative video, thank you!

what books do you recommend for Weber 32 DRT carburetor ?

Very nice 👍 good bro

Where may I acquire a copy of the "SU Spare Parts and Specification Catalogue"?

Great video. I have dual SU HIF44 on my '72 MGB. I was going to attempt to change all the bottom parts (float, needle and seat) while the carburetors are still on the vehicle. Is this possible? I've already done it on my '77 TR7 which has dual Zenith Stromberg CD175 carbs. You just need a good mirror and a little patience. I'm wondering has anybody done this with twin SU HIF44 carbs on an MGB? Anyway very informative video. I didn't know baseline on the jet is flush plus two turns clockwise. Thanks for that information. As long as I have HIF44 the float distance is 1mm, correct?

Do you replace the spring or can you stretch it to increase the pressure? Also, thanks! You are very informative!

Thank you!

wow thanks awesome

Well done. 👍

I like watching your videos very much, very good advice with the manuals... I've owned three Minis. I've also funny enough owned three Triumph Vitesse convertibles (and many more weird things). The Triumphs had twin Strombergs which looked identical to the SU's. Being lazy and as it is so many years since I had them and having probably forgotten the details..Why were they so similar..?

is the circlip on top of damper tube not needed

very clear. Tks

What a great video! Thank you for explaining it all so clearly. I may have a basic question about the oil you use at the 24:20 mark. you mention it to be "SAE grade 20". Does this mean that it is engine oil 20W50?

Any chance of a weber 45 tuning? 🤔😳

Fantastic video. I have a RR with SU carbs. Please, be technical! Take care .

I love this series on AFR and tuning your SU carby.... BUT..... is there going to be a final episode? You've shown getting the data from AFR, you've shown how to base tune your SU... but what about aligning the SU to the data that you have gathered.. and seeing the SU perform? I am a massive fan of your videos. I started with the spray booth videos - as I intend to build one. Keep up the excellent work!

perfect !

I have a question. damper is two type .. what is the difference vented, non vented??

muy ordenado gracias

Do you use vacuum gauges for fine tuning?

I have learned more about SU carbs from watching your videos than I have learned in all the years I drove my 66 MGB. How do I know whether my carbs just need tuning or if they should be rebuilt? Is air leakage where the throttle shaft goes through the carb a common problem on these?

hi!The E10 petrol does it damage the SU carburetor?

Steve, I've taken the manifold off, cleaned and replaced the gaskets, I rebuilt the carbs, put everything back on, but I didn't pay attention to the linkage. Could you show how to set it properly, on the car, I don't want to take it all apart again, I think I've done a really good job, up to that point. I'd like to have new exhaust fitted asap. Rover TC