Sub 500fps .22 Cal Reximex Throne Gen2 Review!

Рет қаралды 4,610

2 ай бұрын

Sub 500fps .22 Cal Reximex Throne Gen2Review!
Reviewing the Canadian version of the Throne Gen2!
Let us know down in the comments if you've used one of these and if so, what did you think about it? I absolutely love it
Available now at canadashootingsupply.ca/ go check them out for all your airgun needs! And be sure to check out their Instagram at / csswhitby

Пікірлер: 48

@rob86trott Ай бұрын

turning the reg up don't really do as much as you think . The main restrictions is the size of the valve port . Drill it out to 3mm and with reg set to 100bar it will give you 700fps with 18.13gn pellets

@BC_BALLISTICS Ай бұрын

I appreciate the info! I was mostly thinking that some guys would prefer easier access to the reg to fine tune their shot counts, fps spread, or to find a sweetspot power wise for their favorite pellet, not necessarily for just increasing power :)

@francisdaoust5862 29 күн бұрын

The valve port is near 5mm so the restriction is not this. The barrel port is oval and just a bit smaller than 3/16 of a inch. Polishing and making a radius flare on the valve port and barrel port will get you 20 extra fps. The hammer spring was at max tension, the valve port wide open reg at 100bar for a total of 550fps with crosman premier ultra magnum at 14.3 gr. I belive another 10 or 20 fps is possible if I radius flare the port of the boddy. For the extra fps, it will need a bigger plenum, longer barrel and increasing the regulator pressure... any other point will be welcom also

@francisdaoust5862 16 күн бұрын

@@BC_BALLISTICS after futher searching, I most admit that they put a small restriction at the port of the valve where the hammer strike (pre chamber rear tap). You can unscrew it and it should help alot. I did not test on the cronograph yet

@alamoairguns Ай бұрын

You have come a long way with your content! Straight to the point. NO BS! You are in my top 3 favorite Canadians of all time!

@BC_BALLISTICS Ай бұрын

Thanks a lot! I appreciate that!!

@Airfunner Ай бұрын

Excellent video. The highlights are the , Difficulty finding Mounting options for this Weaver.Or pick a tinny as you pointed out. If anybody has any comments.I would rather use the heavy mounting preferred over the Dove tale. Filming and editing, Your work allows me to compare your shots.Judge the wind for myself. The review for the rifle is excellent. Gives a very unbiased and makes me feel like i'm actually shooting it In some kind of A weird way. I know this forest that you're in very Well. Heavily addicted to repetitive shooting and practice. But the most fun and rewarding is mild friendly competition.

@BC_BALLISTICS Ай бұрын

thanks a lot! i appreciate your kind words :) ...The UTG picatinny rings i have seem to fit these rails just fine, but i am unsure if all of their different pic rings will work.

@mikesbackyardeh Ай бұрын

Looks pretty sweet. I’m already a customer of ccs I purchased two krals from them. I do have a snow peak m60 b in the mail from air gun archery fun. Great review again 👍👍

@BC_BALLISTICS Ай бұрын

thank you, i appreciate that! oooh those m60b's look great, Wes over at airgun archery fun is awesome to deal with, super nice guy! if you're on Instagram, feel free to let me know how you like that m60b once you spend some time with it!

@Indiana424 2 ай бұрын

Your videos are amazing, i love your b roll shots. Such a very easy watch. Amazing air rifle you have there. And great review, Cheers!

@BC_BALLISTICS Ай бұрын

Thank you! I appreciate that :)

@God_Speed_Bharat Ай бұрын

Beautiful gun and nice job!

@BC_BALLISTICS Ай бұрын

Thanks a lot!

@Bemx2k 7 күн бұрын

They should make version with 2-3'' longer barrel

@stevew145 16 күн бұрын

4:57 you have the scope mnounted on the 11mm part of the rail. The 20mm picatinny rail is below that. its a 2 in one design. You can see the space available in your scope rings to drop down to the next rail.

@BC_BALLISTICS 16 күн бұрын

yes, as mentioned in the video, i prefer to use the dovetail portion on these Kral/ Reximex rails. The lower "picatinny" portion is not cut to standard picatinny sizing and often varies from one model to the next. occasionally it is spot on picatinny, but often if is closer to weaver. it is easier to just default to using dovetail rings on these guns, at least in my opinion.

@TacticalJackalope Ай бұрын

I'm waiting on Canada Shooting Supply to get the PAL version so I don't have to be neutered by silly Canadian laws.

@johnb5519 Ай бұрын

I was thinking of getting one of these, but I didn't like the fact that when scoped, it was going to weigh as much as my Diana model 48. Plus the fact that it has been neutered. Still a nice looking gun though.

@BC_BALLISTICS Ай бұрын

Ya, not much can be done about the weight... full sized rifle weight for sure. A carbon bottle and lighter scope would help a bit but it kinda just is what it is. As for the detuned nature of the gun, I wanted a detuned one anyway lol so that suits me just fine. I have plenty of high powered guns and I find that I either don't shoot them much or I shoot them on lower power settings. But i can see the drawback it would be to some people... that's being said sub 500 in .25 is plenty capable of pesting and small game. Just not a long range.

@johnb5519 Ай бұрын

@@BC_BALLISTICS Yeah, I'm a tinkerer, so I would have liked the challenge.

@rob86trott Ай бұрын

The reximex and kral mags are not the same . They work the same way but the kral mags are much thicker

@BC_BALLISTICS Ай бұрын

Agreed, I didn't mean to insinuate that they were interchangeable

@rob86trott Ай бұрын

Pair of pliers to turn reg up . But you need to take the bottle off and dry shoot the air out the pre chamber before you can turn it down

@BC_BALLISTICS Ай бұрын

Yes, the manual explains that fully... I'd hope that anyone who is tinkering with things reads their manuals first lol

@joelanthony3308 Ай бұрын

Even tho iv got an impact I still want one!

@BC_BALLISTICS Ай бұрын

I don't have an impact, but I can definitely relate to wanting or owing multiple similar or the same guns lol

@user-ev7cl6oc4l 18 күн бұрын

❤❤❤❤❤

@precisionrodentcontrol Ай бұрын

Just saw these are available on Pyramyd, along w the Compact. I know it’s subjective but do you think the magazine would interfere with a left handed cheek weld? Thanks dude.

@BC_BALLISTICS Ай бұрын

Hmmm I don't think so, I've been pushing my cheek into the single shot tray for over a month now and it's not as bad as you'd think lol... and the mag is at least rounded... and worst case, you could always slide the scope back a few millimeters if the mag was pressing into your cheek too hard. .. but like you said, subjective, so its hard to say really... lol what's their return policy like 😂

@precisionrodentcontrol Ай бұрын

@@BC_BALLISTICS thanks for the insight! Wish more high end bullpups had reversible mags

@francisdaoust5862 Ай бұрын

What is the bi-pod in the first pics

@BC_BALLISTICS Ай бұрын

@@francisdaoust5862 just a cheap one off of Amazon

@rob86trott Ай бұрын

WHY does it have the compact barrel on

@BC_BALLISTICS Ай бұрын

My understanding is that the barrel is the same length, just the shroud is shorter, because we can't have any kind of sound suppression here in canada the integral baffles have been removed and the shroud shortened.