Subaru Fender Paintless Dent Removal

Рет қаралды 14,451

4 жыл бұрын

I repaired this in a mobile setting using Paintless Dent Repair Process. Onsite Paintless Dent Removal - Canton, Connecticut.
This is an affiliate link which gives me a small commission at no cost to you.
Hammer - amzn.to/2TxHVMx
Hammer Shrink Wrap Handle - amzn.to/2xePWOw
Blending Hammer - Shane Jacks - jackhammer.myshopify.com/
Dentcraft Rod with Cherry Tip - SKU:RSi-30
A1 Blade Tip Yellow Handle- 38Y25A-S
Elimadent Light - 20" (Makita) Ver-3 - 6 Strip Adjustable Fade Auto Cup

Пікірлер: 19

@patrickwilliams3087 7 күн бұрын

Is that your robot cow in the background saying moo 😂

@ctadventurist 5 күн бұрын

Ha! So my light has a built in vacuum that keeps it attached to the car, that’s what you are hearing!

@kenzaske2278 3 жыл бұрын

I wish I had your skills. I hope she liked the work.

@ctadventurist 3 жыл бұрын

Thank you. Lots of practice. She loved the repair.

@dentdingking4878 4 жыл бұрын

Nice video! Thanks for showing your approach to the repair.

@ctadventurist 4 жыл бұрын

Thanks for watching, I actually took a different approach than I usually would. Good results still!

@ctadventurist 3 жыл бұрын

No tricks here Frogmanvc, This is not a full tutorial of how to repair a dent this an overview.

@victorbarranca2910 4 жыл бұрын

Outstanding job, I myself am not comfortable using a torch, I rather use a heat gun but you have mad skills. Thanks for sharing. How long have you been doing PDR? You do real clean work.

@ctadventurist 4 жыл бұрын

Thanks for the comment. Just keep that torch always moving and check the panel temp you will be fine. Heat gun is certainly preferred. I have been doing PDR for about 6 years or so now. I only service a few dealers, mostly retail jobs.

@glendree1 2 жыл бұрын

Very skillfull

@ctadventurist 2 жыл бұрын

Thank you! Cheers!

@johnintelisano887 4 жыл бұрын

Nice clean repair !👍

@ctadventurist 4 жыл бұрын

Thank you, appreciate the comment.

@bhamlin3 3 жыл бұрын

Fantastic work, flawless. What year is that Subaru? I have a similar dent on my 2006 MX-5 (in mint condition), but my metal is no where near that soft.

@ctadventurist 3 жыл бұрын

Thanks for the comment, it was a 2017 I believe. Subaru metal is very soft but generally I don't like it because it moves in smaller sections.

@23vanitha 16 күн бұрын

amigo por que no trabajaste con pegamento caliente ?

@ctadventurist 16 күн бұрын

My personal preference is to only use hot glue when needed. Pulling paint is fairly common so why risk it unless you need to? Getting a good tool with great leverage is superior to any glue.

@numairmedina912 3 жыл бұрын

Was much does a job like this cost ?

@ctadventurist 3 жыл бұрын

Generally speaking a 1" dent starts off at around $150 or so in my market. A 6" dent on a bodyline on most vehicles would be in the $450-600 price range. I cant recall but this was in the $425 range I believe.