Coop, I have a turbo kit for an ej22 thats been sitting it my garage for a few years. Single port exhaust manifold, otherwise should be similar. Its yours if you pay for shipping and slap it on there.

Injectors are likely clogged if that engine has been sitting. Give them a cleaning and see what happens

Coop, check out the Gambler 500! You built a Gambler and didn't even know it

You are one odd duck. Will pull 1 1/2 engines out solo in the Florida sun, but won't take the time to buy 3 freakin nuts from any number of stores that would have them on the shelf.

The rear wheels move forward as you lift, so you need either adjustable trailing arms or to space out the trailing arm body mounts. This things gonna be great

Coop saying he’s doesn’t know why he built it is basically all of my projects

For the rear you need trailing arm spacers. Adf or primitive racing have them.

With the exhaust leak you’ve got bad O2 readings also

I drove a 2000 Outback 4 cyl for 18 years. I never once came close to being stuck even in the worse of Canadian winters. The awd system is simply amazing.

Wait...you didn't change the plugs...why would you not do that, there is literally no better time to do it.

We can't wait to see you bogging deep with that snorkel kit. Your awsome keep it up guys

If you're telling yourself "I don't know why I built this", it ends up being the best build you can possibly have

Gotta get that spacer for the lateral link mount. It will center the rear tire back up in the wheel well

I fully love you. I had a 98 outback with a home made 2.5 inch lift and 27.5” tires that I beat the heck out of. I miss it

The Subaru sounds like Tickerbell: Jeremy's Yale Forklift😜

Offroad Subarus are the best! Thanks for sharing!

Super jealous. I can’t wait to lift my 03 LL Bean wagon. Well done sir! Good luck with the tune up!

The channel needed this kind of build. Idea for next video title "I took the Subaru to the Freedom Factory and tore up the grass. Owner was irate."

Keep at it man. That subu could turn into a fun build!

Regarding exhaust studs; I’d chase threads and anti- seize everything for future convenience.

This is good content! You will get good views with projects like this 😃

I love the channel, the Camaro is so fast, and you are more comfortable in front of the camera, keep it up

Coop you have a welder sitting there, buy some 2.5 inch round tube and start fitting an exhaust

I’m still early in vid but I hope you did headgasket or plan on doing it. It’s pretty easy. 2 day job if you can get the heads machined right away. Don’t go oem, if u ever overheat a little bit for any reason the gasket will fail. Get a felpro mls or a six star mls. I daily a lifted forester.

This vision in your mind...did it happen to be after dropping several hits of acid by chance?

I hope you kept building onto it, I love my 99 outback and plan to do some stuff like this to it.

Those tires are awesome. I've got a set of those in 35x12.5's on my ram and I can go just about anywhere. After you leave the mud or ect, they'll fling crap out of the tires for like a mile or so lol.

Sometimes I’ll put you on to fall asleep too. Thanks Man!

Had a '99 Impreza 2.5RS and loved that thing. Put Borla unequal length headers on it and a Stromung catback exhaust and thought it sounded great. Gave it a deep rumble. With decent snow tires that thing never got stuck once, ever, in any snow storm. That awd system was awesome.

Everybody needs a beater. It has a "special purpose"

Need some trailing arm bracket spacers to fix that wacky wheel gap in the rear

Coop you doing good keep it up bud

those things will go anywhere!

Just now getting the time to watch. Maybe late but never miss a upload.

Tip: atf fluid works really dam good really rusted stuff put them in a little container and let them sit over night and use a wire wheel to clean the threads first. I usually always get them off like that!!

"I don't know why I built this." - coop 2021

Is this going to be your first give away car. Thing is sweet. Bad ass coop. Keep up the good work love the channel

I don’t know why you built it either, but glad that you did!!!

Brotherrrr, lmfao. Why would you not change the spark plugs at the very least? Cmon now hahah, oh well at least it looks cool! If you get that thing running good, it would be sick!!!

See if if can complete the Freedom Factory off-road course.

Back to back championships is something that happened so much in my life I forget what an amazing feeling it is(esp with a Stanley cup),but u know I gotta bash it being 2 SHORTENED NHL season but it is the 1 sport it really does make a difference. 2 separate NON COVID back 2 back seasons is literally devoting 2 years of ur life performing at a championship level where 2 covid seasons had a pretty heafty break. But congrats and live it up,ull be amazed how quick those guys get old

Great content thanks for sharing

Its been blah out today in NC, raining and windy can't work on the project, nothing ever good on TV. I see Cooper post, my happy ass ran to the porch with my phone so fast, my feet had No time to even touch the ground lol 🙃 😅🤣😂😜

Screw the haters. Love the outback before the lift. Keep the Subaru contact coming.

Anderson Design Fabrication can sort your rear wheel clearance problem. All you need is a trailing arm spacers set.

if you gut that from the front seats back itll go alot further an sit up even higher an wont wanna smash bottom out because of the weight lol, its really coming together lol i cant wait to see you an her bombing around in the woods with it :D stay blessed you two !

day hauler for your side by side, nice Baha rack and a push bar and fog lights your done, and they are notorious for mass air sensor going bad.

Please show more of what you build as you build it that would be nice

You get an immediate like just from the thumb nail , good video coop

I feel you with the stud issue. My rear exhaust stud decided it wanted out when I replaced my exhaust. It also decided it doesn’t wanna go back in. Let’s just say my rear exhaust stud is now RTV

Those LingLong tires are actually really good tires, especially for the price.

My 2002 impreza had like an in/out inside the fender connected to the airbox on the other side of where you were holding that snorkel a place where water could fall down and drain, I wonder if this one as well.

Coop getting his dad bod on.

You need trailing arm spacers to fix your rear wheel alignment, as well as 03-08 Forester Rear struts bolt right on and have a taller rear spring perch. will give you more rear tire clearance

listening to it "idle" kinda made my eye twitch. 😂

I love it Cooper thats the shit man!

Sounds ruff there bud almost like a stem engine trying to take 📴

yay, upload just as I sit down to check,

With the high idle, I wonder if the throttle body is different between auto/manual? I did a swap once with an auto donor into a manual car and the throttle body was different somehow resulting in the a high idle

Sounds like a Briggs lmao

Time for a little tune up, plugs wires and maybe even injector cleaning someone else suggested. Get a cheap OBD II scanner and check the codes, one of the cylinders is misfiring. That would be a great winter beater here in MI

Weld some tow hooks on the front and back.

That' s an adorable car.

Definitely needs trailing arm spacers, check Anderson fab

Coop: It does have good AC Car running on 2 cylinders at best: we'll see about that.

I'm thinking a couple heavy tow hooks that are easy to get to. Did it get named Boggaru because of the tires or the motor?

Funny how Cleetus waits for your post then BAM!

Good for you cooper. In all the success in being independent

You have a vacuum leak causing it to idle high and the idle air control valve is trying to idle it down That's why it keeps going up and down

Got that lawnmower tune-up 😂

Remember to drag the brakes to keep the diffs locked up when in the muck

Nice transformation going on there.👍🏻😎🇺🇸

Subaru where one of the best rally car's and put the tech into the road cars

Just sent you a link on your Facebook messenger. Trailing arm spacers so you can center the rear wheels with out cutting the fender

I like the Subaru project! I'd like to see how it runs after you replace the plugs, clean the injectors, and fix those leaks in the headers. I've had a couple of AWD Subarus I bought as winter beaters and put on four snow tires and they were almost as fun as any nice car I've had in the dry.

I have a buddy with the same car, he uses it in the Florida Gambler 500, it is blast

Love it!

Id recommend getting some d window steelies to push the wheels out more and make it so you dont crack aluminum wheels with low pressure or hard hits

Run a wire from the te1 to e1 diagnostic plug and when u turn ignition to on the check engine light will flash on n off in intervals and get any fault codes

so we gonna start the rotary supra now?

The boggaru. What a unit.

Coop are you sure the 02 isn’t throwing the motor off. And the exhaust note on Subarus/flat4 has uneven exhaust length which gives it its tone. Ie air cooled vw beetle

The idle up and down, most likly is idle air control valve aka, iacs valve.

Make it your backup rig to take to the track and carry around your tools and also acts as your portable cooler unit. You get off track and sit in the car to cool down

A Canadian seeing a Florida person saying "rusty" is one of the funniest thing I've ever heard

Lifting a legacy: Congratulations, you created an Outback

What size tire was that, I’m doing basic build as well

Would love to see a turbo j series swapped into this thing

Fix the exhaust leaks so the o2 reading is accurate. Replace plugs and wires sounds like a plug may have a carbon trace or have opened up completely. Vacuum hoses as well may need replacing very likely.

I had an exhaust leak on my outback and it ran like crap. Fixed the leak, back to good.

I saw Cooper leaving the big scientology building downtown

Vacuum hoses or cold start injector, tps might need alignment

Lmao coop it sounds like a lawn mower at 9:52 but that will happen when it’s a 4 cylinder with exhaust leaks

They used to sell the bolts n studs and lead gasket at autozone. Even had them in stock...

Really wanna know where he got the top hat spacers

Long live the Bogaru...i see some fun shenanigans comin up

Cooper is starting to become my favorite KZfaqr. His IDC attitude and laziness is just next level awesome. Then add Bronte in the mix man this channel needs to grow just because of her.

This a great build simple it doesn’t cost a ton And if it gets screwed up having some fun who cares that’s what makes it great you can fun without worrying

Woah coop use hub centric spacers, those shims are not safe

You should start time lapse videos of YOU doing the mechanical work. So far I have not seen YOU turn one wrench which leads me to believe you have someone else doing the work.