Just placed my order at 3 minutes into your video! I’ve seen other people do these, but I never stayed through the entire video because they didn’t seem interesting. But because it’s YOUR video, I have no placed my order! Thank you again for sharing your technique!!!
@MakingwithMarilyn10 ай бұрын
Thanks so much, Donna! That is so sweet and motivating to me! I hope you enjoy the wind spinners too.
@bevyjeanheyrman85377 ай бұрын
I do-love making wind spinners & have made them in the past. Thank you for the added tweeks. I llWiimm
@MakingwithMarilyn7 ай бұрын
They really are fun to make! I will be making a couple more in the spring.
@MelissaH0510 ай бұрын
I can NOT thank you enough for this video and explaining the process in inkscape as well as you did!!!!
@MakingwithMarilyn10 ай бұрын
Thank you so much and thank you for watching!!!
@latriciacreates10 ай бұрын
That looks really good. I like the idea of adding a dangle. What a great gift! Thanks for another cool project to try.
@MakingwithMarilyn10 ай бұрын
Thank you, Latricia!
@MAHWL10 ай бұрын
This is really cool!! I love how it came out! 🥰😍
@MakingwithMarilyn10 ай бұрын
Thank you so much!
@Keto99479 ай бұрын
@@MakingwithMarilynhi you did a video a couple years ago for faux rhinestones with the word Christmas where the T was a cross. The link to the design is no longer available. Where can I get your design please
@MakingwithMarilyn9 ай бұрын
@@Keto9947 can you email me at makingwithmarilyn@gmail.com
@vrothery5010 ай бұрын
I just bought the wind spinners - thanks for the link!!! Now I will watch your video!
@MakingwithMarilyn10 ай бұрын
Thank you so much! I love that you can have easy and even personalized yard art with these.
@TYJ41910 ай бұрын
That is really pretty and great job lining up the Santa. Tracey
@MakingwithMarilyn10 ай бұрын
Thanks Tracey!
@nahnisjourney140610 ай бұрын
Ugh…. I’m late seeing your video!!! Thank you for sharing! 🌹🌹🌹
@bernadettetaylor476210 ай бұрын
That turned out really cute… thanks for sharing…!!! ❤️🙏🏽
@MakingwithMarilyn10 ай бұрын
Thanks so much for watching.
@rebajackson107710 ай бұрын
Lovely.I was wondering how people was making these. I may have to try it. Looks really easy. Thanks for the very easy instructions.
@MakingwithMarilyn10 ай бұрын
You're very welcome. Yes, they are easy and so much fun! You should definitely try them. I'm thinking about even making a Halloween one to put out front.
@bevyjeanheyrman85377 ай бұрын
I will use them. I too was struggling with trying to get the focus on the center placement. -thanks
@MakingwithMarilyn7 ай бұрын
Makes a big difference to me. Thank you so much for watching!
@PaleoTimesTV10 ай бұрын
Thank you for your thorough explanation, these are great I got them last week and they are my favorite on Amazon!
@MakingwithMarilyn10 ай бұрын
Thanks so much for watching!
@lindagray719110 ай бұрын
That came out so cute. Love it!
@MakingwithMarilyn10 ай бұрын
Thank you, Linda!
@debragarrett00710 ай бұрын
Thank you Marilyn for sharing . Awesome Video. I wanted to do a few of these .
@MakingwithMarilyn10 ай бұрын
Thank you Debra!
@UNBIASEDLLC10 ай бұрын
Cute designs. I love it.
@rookdebpoye616610 ай бұрын
This is on my list! Thank you so much for the video! It came out so pretty!! I love how you broke it down, I can’t wait to try ❤️As soon as I finally hook up my 15000 Epson. I’ve only had 3 months now. Maybe tomorrow? 😂
@MakingwithMarilyn10 ай бұрын
Yes, hook that thing up. I love it!!! Thanks for watching.
@UNBIASEDLLC10 ай бұрын
OMG! I love your mic 🎤 ,Queen.
@MakingwithMarilyn10 ай бұрын
Thanks Unbiased.
@jamiewebb96267 ай бұрын
So cute!
@MakingwithMarilyn7 ай бұрын
Thank you!
@thecraftedmind173510 ай бұрын
So nice
@MakingwithMarilyn10 ай бұрын
Thank you!
@bevyjeanheyrman85377 ай бұрын
Replay-thank you
@Jana-TheCraftyGambler10 ай бұрын
Have you ever tried placing both images on at the same time? I saw someone else do this and it worked like a charm. The premises being that metal is such a great conductor of heat that you can sublimate both sides at a time. Hers came out beautiful.
@MakingwithMarilyn10 ай бұрын
I saw CrystalAnn do that and it worked well. I haven’t tried it yet.
@louisemcclain618910 ай бұрын
I Love it 😊
@MakingwithMarilyn10 ай бұрын
Thank you.
@gerrywolfe25498 ай бұрын
Thanks for the great video. Did it make a better visual when you didn’t mirror the one side or really no different when it was spinning. I like that it would be easier to line up.
@MakingwithMarilyn8 ай бұрын
I didn't really notice a big difference as it was spinning. Thanks so much for watching.
@FredFiorito2 ай бұрын
Thanks for your instructions. My final wind spinners have a haze on them that you can see when tilting them against the light. Yours look crystal clear. Do you have any advice?
@MakingwithMarilyn2 ай бұрын
I've not heard of that. I did find a KZfaq video that said it could be caused by pressure issues. I wish I could be more helpful but I just haven't experienced it to try to problem solve it.
@Princess_karen4 ай бұрын
I ordered the Epson ET15000 and it should be here Monday. Have you been happy with it. I have my sublimation ink and can’t wait for it to arrive
@MakingwithMarilyn4 ай бұрын
I love the Epson Ecotank 15000 for sublimation!!! I bet you're super excited.
@UNBIASEDLLC10 ай бұрын
Hey Queen.
@joycelandry84995 ай бұрын
how did you put the 13 x 19 " paper into a standard 8.5 x 11 printer?
@MakingwithMarilyn5 ай бұрын
You don't have to have a large format printer since these are the smaller 8" windspinners, but you can use a larger printer if you have one. If you use a regular size printer, print the image on 2 sheets (one for the front and one for the back of the spinner). I printed both images on one large piece of paper on a larger printer. Thank you for watching!
@janbaker94183 ай бұрын
What are you putting under the wind spinner when you do the wind zpinner
@MakingwithMarilyn2 ай бұрын
I use butcher paper under it.
@UNBIASEDLLC10 ай бұрын
Is Inkscape close to using photoshop? The setup kinda looks the same.
@MakingwithMarilyn10 ай бұрын
Yes, it is similar but has less photo editing features.
@noreencheckie547310 ай бұрын
Is there a simpler software
@MakingwithMarilyn10 ай бұрын
You could also use Silhouette, Illustrator and even Cricut Design Space if you tell it you are doing a print then cut.
@valeriehofmann26159 ай бұрын
Why press so long? Others ive seen do 60 seconds
@MakingwithMarilyn9 ай бұрын
I went by the manufacturer’s instructions. I often use less time, though.