When you have scorching from the heat press, doing sublimation, you can lightly spray the scorched area with hydrogen peroxide and it should take the brown marks away.

This IS ONE OF THE FEW INSTRUCTIONAL VIDEOS, I WATCH IN ITS ENTIRETY. Great presentation and honesty in your video. Good luck, look forward to more videos.

Angie, thank you SO MUCH for testing these products for us. You save us SO MUCH: money, time and disappointment! You are awesome!!

Angie, you are so awesome to test this stuff out for us. Thank you, thank you, thank you!! I'm bummed that it didn't work out but you saved me a fortune in investing in these myself.

OMG! Hope I don’t seem like too much of a geek but I’m so stoked over the past few videos that you’ve posted! It’s all the sublimation information that I’ve been looking for. Thanks 😊!

The PolyCoats are really for specific projects and takes a lot more time. It is worth sticking to professional sublimation blanks. Did want to mention - tape upper parts of mugs where mouths will be if someone will be drinking from the mug. Also, use a very fine sand paper over the mug after the coating has dried and this will make it smooth. I’ve also seen pros lightly sand mugs before putting on the poly coating as they say it helps. For shirts, if you wet the edges (with water before pressing) where you sprayed the poly , but are not sublimating it helps to not get the darkened area. You can also lightly spray brown areas with peroxide/water right after, leave for a bit, and then rinse. Love your channel! Thanks for keeping us inspired!

Love your very informative videos! Appreciate all the work you put into testing the various products. Thank you!

I’m glad I found this channel, I don’t think this will be something I will be doing any time soon. Thank you for sharing.

Thank you for this! I've wanted to try coating my own mugs, now I'm glad I didn't waste my money.

Just Love your honest opinion and for doing the tests for us, That why we are subscribers.

On the sublimation spray for fabrics, I used it on 100% cotton towels & washed them with just baking soda in the washer & tumble dried like normal and it came off no issues. I used the same product as well as a different company's spray which is similar.

Wow! I was about to try some of this stuff... So glad I came to check with you first!! 🧐

Great video and very informative! Thank you for doing these tests as I was wondering...now I know!💕

Thank you for this video. I was wondering how these products would work. You definitely answered my question. I truly appreciate your videos. Thanks for being you.

Thank you for saving us all the time and frustration! You are the best!!

Btw I love all your videos... thank you for testing things for us, because you've saved me so much money from being wasted

thank you so much for experimenting with these products, I was looking into trying this coating process but I will continue to use my sublimation blank mugs. Thanks!!! 😀

Great information and it saves us from product disappointments! Thank you!

Excellent video. You probably saved a lot of people some money buying disappointing products. You rock as always.

TACK Angie, du är så bra på att förklara i dina videoklipp.

Thank you for this video. I have been wondering if this would work. Now I know!

This video was timed to perfection lol. I had been looking at sublimation sprays but have definitely got some food for thought now.

Angie, thanks for the instructional video. I purchased the Ngoodiez sub coating for mugs. It did not come with instructions. I found your video thinking it would tell me how to use it. However, what it did shows me is that this is a product I really don't want to even fool with at all. So, it's going back to Amazon and I will purchase mugs already set up for sublimation. Thanks for passing on your expertise.

As soon as you started Mixing... I just decided to bite the bullet and BUY SUBLIMATION MUGS... Especially as a business... With that warning about not applying where body contacted would be... Dont need lawsuits. Thanks for this info... always looking for easier, faster and CHEAPER... Thanks again...BEST VIDEOS EVER!!

Great video. Thank you for testing these products

thanks for this video!!! it was soo good to know this!

Angie, once again another terrific video!!! Question on the WRMK mug wrap. Did you like using that? I find that fascinating!!! Do any of your previous videos show how to use that from start to finish (oven temp, time in oven, etc). I've never seen that wrap before. Thanks!

Wow, thanks for saving me money on these products!

Very helpful. I've tried another brand of poly spray for cotton and it was pretty good--but not 100%. So I'm not a fan of polyester shirts. Do you have a recommendation for poly shirts that are thicker and feel/look more like cotton? THanks.

Thanks, Angie well done, well presented.

Thank you for the info!!! It's so helpful to watch your results before diving in blind. Have you tried polygloss?

Thank you for doing this video! I am learning a lot. What is the difference between sublimation and silk screen on fabric? Which is better?

Wow! Thank you for doing this video. I'll stick to the sublimation mugs.

Thank you for sharing this. I was hoping to coat my own, won't bother

Interesting video. The WRMK wrap seemed to work well with the sublimation blank. I recently bought the set at a greatly reduced price so if everything works except the coating, I'm OK with that. I'm hoping the wraps will work on tumblers also.

Hello, when I apply the sublimation liquid to a ceramic mug, does it become ready for printing? I put it on my freesub heat transfer machine and of course the picture will be with tape, is that enough?

Hi Ms. Angie I am getting into sublimation and having a very hard time. I downloaded the ICC Drivers for my ET-2720 have the hipoo ink. However, when I use my polyester item the image does not transfer to the material. I have a Vevor 8 in 1 heat press. Can you please help me figure out what I am doing wrong? Please!!!

Great comparison. Don't like any of the diy sublimation coatings. Will stick with the original sublimation products. Thank you Angie. 💐💐💐

sooooo helpful. thank you.. I love your videos

Angie hi, regarding the fabric poly spray, was wondering if you have tried this technique using your heat press instead of the Cricut press. I've seen a KZfaq video showing no yellowing on a 100% cotton sweat shirt using a regular heat press. I've tried using my Cricut heat press several times with a poly spray and no matter what temp I use, there's yellowing (like it burns the t-shirt). So I'm wondering if maybe the result would be more favorable using a regular heat press.

I used the same spray on a shirt and once I washed it, the yellow went away and it worked great for my cotton shirt.

Can you try the fuze on cotton????! Would love to see that one.

Thanks for your videos. I've seen other videos that talk about the yellowing being gone after washing. Let us know when you wash that shirt. Also, I read in the comments about someone having success with Poly T Plus and Gloss for shirts and mugs. Will check in again to see if you try those. I looked for that product at Hobby Lobby and didn't see it. (Poly T Plus.). Thanks again! Excellent videos.

Im also wondering if the sublimation coating would go on coloured mugs like black, red etc..

Thank you! Made my life so much better! I was debating on getting those exact stuff! I will pass on it. And just spend the extra money on the sublimation products

Would you mind doing something like this for clear glass? I'm most interested in wine bottles. I make wine at home and would love to just sublimate the labels so I don't have to replace the labels every time I reuse the bottle.

is is possible to use the spray sublimation coating on a tumbler?

Just found this channel and love it. New subscriber

Hi Angie. Thanks for the videos. What is the best sublimation printer in your opinion?

Thank you Angie for this video, thank you for your honesty!!!! Great helpful video thank you for sharing!!! Hugs Liz x

the spray for the t-shirt was very yellow. Im wondering though, how bright was the design on the 100% cotton shirt? Would it have been brighter on a polyester or blend?

Whew~! Thank you! You just saved me a lot of time and hassle!

How to print on the bottom of the mug ( External ) through sublimatiom

Can you try that coating in the mugpress?

Not sure about these, but the Subli-T spray is amazing and works wonders. Also, the little bit of yellowing can be fixed by a quick spray of peroxide. You can sublimate in cotton and it will look great until you wash it. Because the ink has nothing to bond with, it will wash out. Otherwise, the spray I use works great, those cheap brands are terrible.

thank you for saving me money. I love your channel.

Love the test and the information. Will be trying more of them? I know people seem to like Dyepress poly T plus for fabric and Dyepress polygloss. I even heard people using polycrylic not only on hard surfaces but mix it to use on fabric. Have you heard of it or tried it? Thanks for the video!

Wondering if you've ever used Polygloss coating brand sublimation coating and if so how does it work compared to the brand you used in this video?

Instructions do say if you oversaturate the shirt, for the spray on fabric, it will turn yellow. Will be trying on a cotton sweater. Gonna give it a go.

I am interested for purchasing for this item, how can purchase it

I saw where someone showed you can spray peroxide over it and it will remove the yellowing. Haven't tried it.

Thank you for this video.

I've used Slansval brand with great success on wood, leather & stainless.

In regards to the T-shirt since it scorched the cotton, have you tried doing it on a lighter heat setting instead of what the recommended setting was? Was it still scorched if you did?

Thank you Angie- you saved me some money and I appreciate it. I think for now, I will stay away from trying these products. I could clearly see the difference. I was , however- surprised that the cotton took the ink ( the un-sublimated side) fairly well. I thought it wouldn't print at all

Thanks for doing this video! I would love to know what happens when you wash that t-shirt. How much do the colors fade when washed and will the brown color leave?

You do the greatest videos that save us all so much time and money! This may sound weird, but I am glad it wasn't a success because i dont want to be tempted to buy even more stuff. For me, having a dedicated oven for the ceramics is a non-starter. I just don't have tons of room for that type of thing. So I likely will never do mugs at all. But for fabrics I'll stick with polyester shirts

Did the yellowing on the shirt wash away?

Hi, i am just wondering can it be cured in a mug press instead of the oven? Or maybe used in the heat press after being cured in the over?

I know the shirt will I do tons. But I wanna learn if we can do it on tumblers and glass wine

I messed up on a few stainless steel tumblers and when I removed the ink it removed all the white coating. Can I use these on stainless steel tumbler to subliminate after?

Hello I wanted to know if I can use sublimation paper with my hp jet 5505 printer and then use sublimation blanks I really don’t want to buy another printer but I would like to try this if you can help me do this on your video. thank you love your videos.

Thanks so much for this info.

How do I know if a blank is for sublimation? I bought a tumbler at Michaels that looks like a sublimation but I don’t know if it is. Do you know how to identify a sublimation blank?

Very useful,thank you

Like to see wash test on the shirt, and the mug wrap.

Can you use the mug machine to let the liquid sublimate instead of a separate oven?

Thank you so much . I want to craft so badly but I am stuck in the bed battling as hard as I can. I don’t know how to properly ask any one at all for any help. I thought it may b ok if I posted here for Admins or Owner I Hope to hear back from you soon if you don’t mind . Thanks in advance.

what kind oven you use?? and they temperature?? thank you .good thing l Didnt wasted money on plain mugs

can you use this coating on metal? And do you have a video from beginning to end making a bone dog tag?

I would recommend that you use a sponge to very gently spread spay on your shirt and in the process of doing that it help to remove excess from your shirt. When brushing cups put your hand down in mug with your gloves on it makes it easier to move your cup around and not get your fingers away. Questions for you , did you use a paper protection for your heat wrap for cups to keep in from bleeding ink onto the wrap and did you try washing shirts to see what happens to them (like the yellowing disappears?)?Thanks for your video it was helpful and informative. I have tried the 2 tbsp of minwax water based polycrylic to 8oz of water in spray bottle. It didn’t yellow and I was able to sublimate to the cotton shirt. I also have washed the shirt (so far 3 times) and the sublimation is still there but I feel as if it has dulled a little.Again thanks for the video I really enjoyed it.

Angie have you tried the Poly T Pro from dyepress on shirts?

I saw the WRMK kit on HSN and when I asked about the transfer coating, I was told that it was only for use on cotton fabric, and not on hard surfaces like mugs. Do the written instructions say something different? I wasn’t convinced that the coating would be any good, but I ordered the kit anyway because I wanted to try the transfer pens and the price was right! Thank you for an excellent video!

What do you use to clean your brushes after to prevent it from hardening

Which chemical need mixed tell me please 🙏🙏🙏

Hi can I know what is the name of it and can I get it in india

Nice video. After putting a image or test on a mug, is it dishwasher safe.

Angie I am wanting to know if you can sublimate the bottom of a tumbler. I would like to put my logo on the bottom of my tumblers. Is there a way to do this?

Have you tried dyepress polygloss.? If u do would like to see a video.

I can't find links to the cotton spray or cups stuff.?

What about stainless steel water jug. No yellowing would happen ?

parchment paper vs butcher paper for heat press shirts and mug press mugs? tia :)

Excellent info, tfs

I wish I would’ve seen this video earlier lol. I just bought the spray for fabrics

Your'e The Best, Thank You for doing this :)

Which sublimation mug did you use? I didn't see it in the links.

I'm wondering if washing the shirt afterwards would remove the yellowing? Also what does it look like after 5 washes? I'm disappointed in the Memory Makers spray, they are a well known and reliable source for a lot of crafting supplies and I would have expected much better results. I've enjoyed your videos so much (and even though I'm a Silhouette owner by preference, at the time I first started you could not use Cricut without the internet, so now I have a Cameo 4 and a Portrait ) I find so much information that crosses manufacturers and so many creative ideas that I can't resist every video you make, they're terrific! Just a quick rating on your Sublimation Journal, I haven't found places to put many of the pieces of information is like to keep track of, mainly a place to print a page with a photo of the project design, the type and brand of substrate used, where I bought it, fabric or substrate composition, pressing heat and times and any other notes on how it came out, and if my client and I are pleased with the results. I love having the ability to keep those notes other places but I'd like to get a better idea of how I created those projects. I turn 75 in 2 days and crafting, mainly sublimation, has become my favorite thing in life. I've decided out try a and follow your footsteps so I'm creating a crafting project page of my own. I'm a share by nature so if you don't mind if like to send it to you for review and for you to use if you find it helpful. I'm looking forward to your 3 day Camp and you and all your genius friends giving so much encouragement to the rest of us! Thanks again for all your ideas and all your work.

how much rate for this item

Don't know if anyone mentioned bug here in the UK the wrmk is advertised more as a fabric coating. Thanks for your kind time x

Did you wash the shirt to see if the yellowing would go away? Reason I ask is because I have actually pressed to long and had a very yellow-burnt color on a blank Cricut brand shirt and almost tossed it/ But I kept it and washed it to use for experimenting with different colors of Infusible Ink from Cricut ~because sometimes for me at least, I don't exactly know what that color is gonna look like on an actual shirt or if you can even see it at all~am I right crafters?~ Low and behold the yelowwish-butnt color came out and the shirt was amazing!!! Just something to think about trying, I know its not the spray you used on a cotton shirt but hey we all do laundry, so why not give it a toss in the washer before hje trash, not wasting anything this away. My 12 a.m. though for the new day As Always Kiley The Rusty Spur