SUBURBAN MG-5-CV MASTER GRIND SPIN FIXTURE

Рет қаралды 24,950

Solid Rock Machine Shop Inc.

5 жыл бұрын

Our newest Ebay find.
Links to Suburban Tool's KZfaq channel and website:
/ suburbantoolinc
www.subtool.com/

Пікірлер: 79

@ActiveAtom 5 жыл бұрын

Great tool love the NSK 600, something we could watch you work with this all day long, we get to see you perform great grinding work with it, and you are using this to grind your shop built squareness gauge mounted on our absolute favorite tool maker tool Suburban Tool, Our favorite tool from this category from this tool maker is their MM-25R an er-25 collet indexer you have some really nice toys Steve. Really nice finish. Lance & Patrick.

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Lance & Patrick, Steve

@juliandominguez7577 3 жыл бұрын

Nice channel guys good job congratulations

@SolidRockMachineShopInc 3 жыл бұрын

Thanks and welcome! Steve

@warrenjones744 5 жыл бұрын

Always fun to watch you build tools Steve, and with what I would call not your average set ups.

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Warren. Steve

@Smallathe 5 жыл бұрын

LOVELY finish... congratulations on the new shop tool :)

@SolidRockMachineShopInc 5 жыл бұрын

Thanks. Steve

@RRINTHESHOP 5 жыл бұрын

Nice job, beautiful finish. Great demo.

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Randy. Steve

@DudleyToolwright 5 жыл бұрын

You sure do beautiful work Steve. Inspirational.

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Robert. Steve

@EmmaRitson 5 жыл бұрын

lots of interesting stuff. always learning. thanks for another wonderful video.

@SolidRockMachineShopInc 5 жыл бұрын

You're welcome Emma. Steve

@rodneykiemele4721 5 жыл бұрын

Excellent video, great new tool, thanks for sharing

@SolidRockMachineShopInc 5 жыл бұрын

You're welcome Rodney. Steve

@pierresgarage2687 5 жыл бұрын

Nice precision tools, you got neat solutions to expand their capacity. Here I got a, without going in the shop, I think it's a MGI-6 or something similar, it's an older production model, still going great, with all the indexing and integrated set-up features, and a smaller Harig with a motor drive and a tail stock all mounted on a base. With eBay, there are some super great deals to be found, it mostly requires patience... 😎👍

@SolidRockMachineShopInc 5 жыл бұрын

Hi Pierre, Sounds like you have some nice tools. So far eBay has been great for us. Steve

@bclare2544 5 жыл бұрын

That's a nice pickup Steve.

@SolidRockMachineShopInc 5 жыл бұрын

Thanks B Clare. Steve

@bcbloc02 5 жыл бұрын

Easy to see why those Suburban tools cost so much. You really got a nice finish out of your setup.

@SolidRockMachineShopInc 5 жыл бұрын

Hi Brian, I been wanting one of these for a long time now and happy this one came through. Steve

@rickhaass1133 5 жыл бұрын

Great attention to detail.

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Rick. Steve

@robc2536 5 жыл бұрын

Looks like a really nice setup Steve. Glad the ebay sale worked out for you.

@SolidRockMachineShopInc 5 жыл бұрын

Hi Rob, We are too, the unit was like brand new and the wood box is fixed now. Steve

@ROBRENZ 5 жыл бұрын

Enjoyed Steve! looks like a nice unit. ATB, Robin

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Robin. Steve

@captcarlos 5 жыл бұрын

Thank you Steve, informative a always. I will certainly be interested with the diamond dressing of the CBN wheel. I'm looking forward to trying some of these techniques once I get the 3 phase on.... I need to learn how to dress the diamond cup and streight wheels I have. Soo much to learn nd soooo few sources of teaching. Please, keep up the good work. Carl

@SolidRockMachineShopInc 5 жыл бұрын

Hi Carl, Planning the CBN video next. Steve

@kimber1958 4 жыл бұрын

Daryl and you Have inspired me to start my own KZfaq channel.

@SolidRockMachineShopInc 4 жыл бұрын

I hope it goes well for you. Just subscribed. Steve

@kimber1958 4 жыл бұрын

Thanks Steve

@aserta 5 жыл бұрын

Yeah, eBay can be dicey at times. Good that you got it.

@SolidRockMachineShopInc 5 жыл бұрын

This one was a little scary but we are happy it worked out. Steve

@toadjam12000 4 жыл бұрын

I did a lot of form grinding as a tool & die maker for many years. Wire EDM took over a lot of that.

@SolidRockMachineShopInc 4 жыл бұрын

I have too. You don't see form grinding to often any more. Steve

@josephlovell6951 5 жыл бұрын

Great video hope to see you guys at the Good Ol land Fest

@kathyb7126 5 жыл бұрын

We're planning to be there make sure you stop by and say "Hi"!

@josephlovell6951 5 жыл бұрын

@@kathyb7126 you can count on it

@outsidescrewball 5 жыл бұрын

great video...super discussion/demonstration....awesome finish...maybe you just created the new contest for the BASH..the spin fixture centering challenge.....ATB

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Chuck. Steve

@RagsdaleCreek 5 жыл бұрын

👍 Watching in Alabama

@SolidRockMachineShopInc 5 жыл бұрын

Thanks for watching. Steve

@reideichner8597 5 жыл бұрын

Great video! You take a tool and adapt it to what you need and the way you do it is ALWAYS very interesting and informative. Nice finish too!

@SolidRockMachineShopInc 5 жыл бұрын

Thanks Reid. Steve

@nakternal 5 жыл бұрын

Taming that needle.

@MuhammadAfzal-jm6cw Жыл бұрын

Good 👍👍👍👍

@SolidRockMachineShopInc Жыл бұрын

Thanks

@kjinohio5897 5 жыл бұрын

Another option I use to gain more clearance is to just put it on a magnetic sine plate locked down at 0 degrees. Quicker to set up that way.

@SolidRockMachineShopInc 5 жыл бұрын

I don't have one of those yet. On the wish list. Steve

@kjinohio5897 5 жыл бұрын

@@SolidRockMachineShopInc In our shop we probably have over 50 magnetic 5 inch sine plates. Some work centers they are required for an operator to have their own. I'll give you some tips on looking for one. Hermann Schmidt and the Ex-Cell-O are the strongest/best I've seen. The Current Suburbans are REALLY weak anymore. Our company bought 2 new ones a while back and they wouldn't even hold a standard Harig fixture even though it was blocked in over the WHOLE magnetic surface. Surburban evidently has bought out the Ex-Cello-O rights as they also make it now. We ended up getting 2 of those and they work well. they cost almost double the price to their standard plates. As I recall they were close to $4000.00 each. When Ex-Cello was in business they made them for other companies as well so study the design. I found one on Ebay so you can see what it looks like. They have left and right hand threaded screws to hold the angle with a build up and do well. Standard Suburban plates you have to use rubber bands or twist clamps to hold it down. Just a pain. They are nice too as the side rails are in line with bottom. This comes into play when you have stops set to swing with your Harig. It'll be the same. Hermann Schmidt's are like that too. sadly I've also seen some offshore stuff that holds well. You want to take your Small Harig/index fixture along and test it. Firmly secure the Sine plate(Normally best on a grinder chuck, Put the fixture on the sine plate and lock it in. Then try to move the fixture. If you can, walk away. here is a link to see one. Study the handle, base and design. they are coping it to the tee to this day. www.ebay.com/itm/Robins-XLO-Magnetic-Sine-PLate/254215078370?hash=item3b306641e2:g:hIoAAOSwOANcxMbP

@SolidRockMachineShopInc 5 жыл бұрын

@@kjinohio5897 Thanks for the tips. I may make an offer on the eBay link you offered. Steve

@abidansari9467 2 жыл бұрын

Disk cam grinding pin

@turningpoint6643 5 жыл бұрын

Happy that Ebay sale finally worked out ok. An expensive combination of tooling, but for what your doing there's not many options to save money. I am surprised just how quiet that Planet is @ 65k. How's the air consumption on that Steve?

@SolidRockMachineShopInc 5 жыл бұрын

Hi Turning Point, Yes, it is a lot of money but it opens up a lot of new possibilities that would cost much more with other equipment. The unique setups are very fast and accurate with these tools. I was surprised at how quite the 600 was as well. Steve

@maurosegurah 2 жыл бұрын

Super interesting. Basic question ... what type of grinding bit is that you are using?

@SolidRockMachineShopInc 2 жыл бұрын

I believe it was a 46 k pink Aluminum Oxide wheel.

@monsterg4603 5 жыл бұрын

Great video Steve!! Nice e bay find. Just a thought could you possibly offset the out of balance with the handle on the back of the nsk 600? Ie swing opposed to each other. Not teaching your job I am far from it trust me.

@SolidRockMachineShopInc 5 жыл бұрын

Hi Mani, That is a good idea, I will have to keep that in mind. I am always open to learning knew things, thanks for the tip. Steve

@johnson2207 4 жыл бұрын

Could the little bit of runout be from the eccentric setup, the off-center weight causing a little wobble?

@SolidRockMachineShopInc 4 жыл бұрын

That very is possible. I will have to try grinding a part in a 5c collet and see if that makes a difference. Steve

@danvandertorre6349 4 жыл бұрын

I seem to love working with metals and seeing this was fantastic , that 60.000 rpm thing looks like it has air bearing's how to make this would be a grate video .

@SolidRockMachineShopInc 4 жыл бұрын

Are you talking about the mounting fixture build for the NSK grinder, or the NSK grinder itself? Steve

@danvandertorre6349 4 жыл бұрын

the one you had the small pink stone in that you dressed

@curt149k 4 жыл бұрын

dan van der torre It's an air driven tool with a ball bearing spindle.

@santopezzotti730 9 ай бұрын

Did you have any trouble drilling and taping the holes to mount the motor on top

@SolidRockMachineShopInc 9 ай бұрын

no, but you have to be careful not to go to deep and break into the internals.

@santopezzotti730 9 ай бұрын

@@SolidRockMachineShopInc thanks i enjoy you channel

@multiHappyHacker 5 жыл бұрын

Has anyone ever made an extension for the normal grinding spindle to hold those smaller wheels?

@SolidRockMachineShopInc 5 жыл бұрын

Yes, but I don't know how well they work. Steve

@abidansari9467 2 жыл бұрын

Disk cam master meking

@swanvalleymachineshop 5 жыл бұрын

Nice , Suburban tool make nice gear . Can you suggest a supplier & type for the 1/4 shank grinding stones for air spindles . Cheers .

@SolidRockMachineShopInc 5 жыл бұрын

Most Industrial supply house will carry them. The one in the video came from Lambs Industrial supply in Holland MI. It was a 46 grit not sure of the bonding but guessing it was around J. Steve

@swanvalleymachineshop 5 жыл бұрын

@@SolidRockMachineShopInc Thanks

@abidansari9467 2 жыл бұрын

Price machine

@SolidRockMachineShopInc 2 жыл бұрын

I bought mine from Ebay where the prices vary a lot. Steve

@abidansari9467 2 жыл бұрын

Disk cam grinding machine phone no send me

@firstlast7867 5 жыл бұрын

Nice content, pick up your presentation pace, too slow, what you are saying is repetition of information. Also, we know you can indicate, skip to the basic results. I left at about 9 minutes.