Thank you so much for this excellent video!!! I lost my mind and over an hour of time trying to get 1 window installed on a door. The gasket kept falling out, and then when it didn't fall out, the holes weren't lining up. After many attempts, I ended up drilling the hole on the door big enough so that I could see where the screws go into the window frame. Tomorrow, I'm using your method for the second window. Holy cow, I can't even put into words how frustrated I was😂. I know that a China man was laughing at me.

Your video saved me hours of trying to decipher the manual. Thank you for your detailed explanations!

Your instructions are SO much better than the factory instructions. Thank you!!!!

This video was really helpful. The small tips (like fitting the top screw for the door first) helped a long way. I and my wife were able to fit the shed in 2 days (with breaks). We pretty much ignored the manual except for a few location references. This is our first DIY project and it turned out to be very well. Thanks to this video!

I will be honest. Suncast installation instructions, SUCK ! When I called customer support about not having instructions the girl said I can download and print them. The second slap was, their video was crap as well ! You should copyright your video and then sell it to Suncast. Thank you very much for all the help ! Great video in taking the time for instruction, quality and professional. Sincerely, Rob Dattilo

Wow this video really helped. It's simple and you made it even easier. Thank you

This was a fantastic video. We erected one of these today in Bermuda and pretty much ignored the instruction manual. Thanks SO much for taking the time to make this video.

Excellent video. Now I have to get two of these for my place. Got to keep the wife happy! I found you did a perfect explaination of what had to be done. Thank You!

Had a lot of issues with screws not aligning with the panels but after a lot of force everything eventually did work! Thanks for the tutorial!

Guys thank you so very much, your attention to detail in explaining how to put this puppy 🐶 together is impressive; it’s almost like you built it first and then reassembled it to explain how to put it together; I’ve seen other videos and they just don’t explain it the way you did! Next time, tell your helper to say 👋 hello, we don’t bite! 😅

Thank you very much. My husband and I are putting this together now. Extremely helpful!

Love this video. I have a Suncast 7 x 7 to assemble soon, and I will be referring to this video to assist me. Thank you for creating.

Thanks for the video. I used it to assembly my 8x10. So much easier than using the directions. When putting in window gaskets I used small pieces of ducktape to hold the gasket in place. It helped speed up the process. Your idea on the sky lights gasket with the screws sticking out was a great idea. Thanks again.. Awesome video.

Thanks very much for the video, made it easier once I tackled this myself. Just shy of 7 hours from opening first box to completion (with one short break and a lunch break). Like you and others, had some difficulty with the window gaskets staying in place. I used very small pieces of electrical tape to hold them in place until I got a few screws started. But that was only after I struggled for about 30 minutes on the very first window (ugh...). Also had issues getting the very last roof panel in place. Again like others, had to loosen some truss rod screws and bolts so there was room to maneuver. Still had problems getting the last couple screws in place, used a clamp to pull things tight to the truss. Once everything was in place and retightened, the entire structure stiffened up and felt very secure. Very pleased with the purchase, for what it is and for the money I think it's one of the best resin sheds you can buy. We don't expect it to last 30 years, but if we can get the warranty period of 10 years and then perhaps a little bit, we feel we will have gotten our money's worth.

Thx for the very detailed instructional video. I literally just bought this shed and will be installing it myself.

Great video! I used hot glue to keep the window gaskets in place, then laid the doors on their sides to screw the windows in place.

Thanks so much for this tutorial. We erected an 8x7 shed. The only time we referred to the instruction manual was for the A-frame. The long beam does not have that extra piece for length. I was thinking we were missing a piece.😂

Danny guys like you and videos like this is what you tube is all about. You’re killing it Bro 😎

Great video, it helped a lot in speeding things up. A couple of things, on the trusses, the ridge bracket CC goes under the truss legs AA. Also, on the doors, I assembled them on a table where I could lay everything in place and then have the window edge over the table edge so I could put the screws in from below, that worked quite well.

Just got mine down did it by myself with some help from the wife thank you for the instructions!

Thank you for the great video! Helped me and my Dad out alot. The directions to the hardware were confusing at times. your video simplified it!

Although not hard, it helped to watch your video before assembling the shed. Thanks.

I am so glad you made this video! :))) You are very good at explaining this process. I bought the 6x5 version of this shed and I got it all together except for the roof panels. I wasn't sure exactly how they went on and where those metal strips went. My instruction booklet wasn't very helpful in explaining it. I had a heck of a time getting the plexiglass screwed down over the gasket on the doors but I managed to get it with the help of a screw driver. Those little screen vents are pretty lame. They shorted me on screws so I put some silicone around the edges of the screens to hold it good and keep any bugs from crawling inside. I'm going to attempt to put my roof panels on today 😬Thanks again for posting! ☺

This has been on my list to do with the new house, thanks

Perfect video ! Very clear instructions Thanks ! With out it we were lost !

Awesome video Thankz currently building one just need to finish the roof tomorrow and I'm done 😁👍🏼

Great Video . Best Instructional video on how to construct the shed. Nice job.

Nicely done video and very clear instructions. Maybe when August comes around again, you can do a one year review, along with the things you like and dislike about it.

You Have No Idea How Much I Appreciate You Brother! Thank You!

Thanks, my son and I finished this in about 8hrs with a 15mim break, the most difficult part compared to the rest of it which was pretty easy was screwing in the windows on the doors and pushing the rear roof to align with the railing. Other than that it was just tedious.

Great video! I need to unassemble a similar model from a friends home and then rebuild it at my place. This video will come in handy!😂

Thanks for the video man. 7x7 took about 7 hours. Could’ve done it in 5/6 if it weren’t for 2 mistakes that caused me to backtrack.

Thumbs up for the build and the Termi in the background.

Thank you so much for your video, i referred to your video and built my shed 8*7 shed, thanks!

Thank you so much for the video!

Super helpful. You're a good teacher.

took me 5 hrs by myself, thanks for cheat codes :)

Excellent instruction video. Thank you

This video was very helpful. I was struggling to get the last roof panel aligned and once I removed the screw in the truss assembly, I had more wiggle room to line up the roof panels. I ended up using the video vs. the manual to finish the project. Just got done loading up the shed!

Mine is a year old, i caulked the inside and built it in the shade, if you're not building it on a cement foundation as i did, make sure your platform is level. it won't go together if its off, such as the door or roof not fitting right. mine has held up fine with no leaks or other issues. I read the reviews on it, and it doesn't hold up well in the direct sun in hot climates.

Great video! Very helpful, thank you

Thanks you did a great video. I used it instead of the directions. One issue I had was with the last side of the roof panels lining up.

Thank you, very helpful and accurate

Thank you for making this video

Excellent Video!

Great video! However on my shed ( exactly the same Suncast shed), the left side walls had to be installed before the corners...

Great video. Step by step. Thank you!!!!

Thanks for doing this video

Great video!! Thanks

Instructions where hard thank you for your video

Fantastic video 👏🏾 👌 saved me a lot of time

Great video.

Great video Instructions were terrible couldn't have done it without you

Thanks very much, help me a lot,thanks god bless you .

Dude your awesome. Thanks for this. Directions sucked. Because of this i got that thing up minus the doors in 3.5 hours by myself. Did the doors this am

Great job

Great video. who needs instructions when we got you thanks alot

Good job 👍

Just put ours up with my son, took two days working at a leisurely pace. Regarding the door window gaskets. I just laid a bead of contact adhesive in the channel before laying down the gasket and had no problem securing everything from inside the door. After it was put together, we used clear waterproof caulking in all of the seams from the inside. With storms tonight, we will see if any more is needed.

We had put one up 5 years ago in our pool area. Same brand and color, but our windows are round. Our area is pretty level, but not sure if it's just wear or from the weather but all the corners are cracking, so you can see daylight through it.

Execellent instructional video.

Would adding a bead of non-hardening adhesive sealant in the slots be helpful when assembling the floor, walls and roof panels, and maybe in the corner panels? Not so much for strength, but for keeping critters and bugs out, and perhaps extra water sealing.

Hoping Suncast sent some $$$ your way! Great Video!

Very helpful. Thanks.

Greetings. Thank you, Danny, for your very helpful video. Would you recommend cutting out a small section of the floor to accommodate a well pump and tank?

Thank you for this video you guys saved my behind 4 times lmao

Nice job guy! I want one for Father's Day. Thank you for sharing and making the video. I'm curious to know how it's held up since assembly .

I would have been lost without your video. Thank you so much for doing this. Extremely helpful and very clear. Did you happen to anchor the shed to your concrete?

I've been wanting to get one of these for awhile so I can move the snowblower, lawnmower and various rakes and shovles out of the garage. I imagine a lot of these are assembled for the most part in the same way which is good because I can come back and reference this.

awesome

larger floor panels , i notice you same. the “ramp ups” are offset. at very front of bottom panels they off by couple centimeters

Thanks for doing this video. It helped a ton without going through the instruction manual

excellent video, thank you very much for taking the time to make it.

They sent me the same roof panels. Now i have order replacement

Hi, thanks for sharing so how is it holding up? And also I noticed there was quite a bit of spaces where I seen daylight coming through the gabs did you do any kind of caulking or weatherproofing? Thanks

Hey brother how do you think this shed will do in Michigan winters and snow lol I just ordered one let me know

Thanks for your video, i watched it 5 times with my 10 years old son before i started assembling mine. Just got it done today with the help of my son (didnt really need his help, just wanted that father and son experience) I notice the door doesnt want to close unless i pull really hard up to get the bottom to clear, but then the top ends up being too high up to tuck inside the frame, did you have this issue?

Thanks for the great video, just a quick question how do you remove the film of the window glass? Any trick for that?

What size is the screwdriver for the tan color screw?

I’ve just received this shed and watched your video before I do anything. I have a question about a subject that no one else has touched on here. Since this thing is plastic, the torque the drill is set to is going to have to be set very low. I have a Dewalt that looks like yours that’s six years old. It’s never been used for anything other that drilling holes. I haven’t been able to find the owner’s manual to learn how to adjust the torque setting. I’ve thought about just going ahead and experimenting starting with the lowest setting. What would you say is the correct setting number for this job? Thank you for your advice and the great job you’ve done on making this video.

Hey Danny great video! We have just bought a home that has this exact shed but it's facing the wrong direction for us, I'm thinking it looks like the floor may not get screwed in? Do you think we would be able to rotate it ?? Two ladies?? Thank you so much for any advice :-)

Are the walls strong enough to hold 2x4 wood joists or channel bar with screws for extra shelves?

great video! amazon was out of stock but going to menards to pick up the exact shed. question - do you recall the width and length of the boxes? I'm going to rent a van or their pickup truck so would these two boxes slide in easy?

Hello. Could you please tell me The actual width of this shed? I have an existing foundation that is 104 inches wide. I know it’s a bit too wide just want to know how much. Thank you

Do you think you could handle any wind I'd like to use it for a chicken coop and do they sell items to lock in on the side

Hi how do you get the film off of the window insert? It says take film off both side of plastic windows but I can’t figure it out

Does this have ventilation? I have a very large basement and I'd like a friend to be able to sleep down in my basement without having to heat the entire room, and also give them privacy at night. My thought was to build one of these in the corner of the room, place a Twin XL bed and a night stand and wardrobe into. They could mount extra shelving and a TV onto the wall with the available hooking system, and use a small space heater to keep it warm.

How did you tighten "RR" on the 8th minute of your video? "LL" doesn't seem to bind onto RR all the way, just the edge.

Good job on the step-by-step. Great instructional video. I, WITH HELP, got it erected in half a day. I was overwhelmed at first just at the sight of all the parts...but I pushed through. Last thing...the boxes it came in were most formidable to get the product OUT of!! OMG!!

Thank you for doing this video! Do you think I could cut it to add windows? I want to convert it into a goat barn. Thank you again!!

How many holes on bottom to drill into wood/concrete? Could I do 6 concrete footings to drill into on top of pee rock?

Great video, how long did it take you for assembly?

Has your shed holding up. Mines terrible warping , I’m taking legal action with suncast

Do you have to anchor it to the concrete? Can we install it on the bare ground?

Hello, Great Video! How has the shed held up? Any issues so far? I’m thinking of purchasing one.

Hey, this is currently my project for the next two days. My instructions DON'T tell me which screws to use for the skylights in the roof? WHAT ARE THEY???

I'm having an issue with the roof frame with a slight bend in it

If I accidentally started with the back left corner (before watching your video) have I ruined my chances of this going together correctly?

What if my concrete floor is not level ? How to fix it

How much did it cost? I can’t seem to find one but if it do it’s crazy expensive