Good stuff man! You’ve came a long way, keep up the awesome work. Bass on bro!

Man that’s awesome! I’m sure they’ll perform even better when broken in. Thank you for the build vids Parker.

For terminals I use all thread. Drill a hole slightly smaller than the all thread and screw it in. With the all thread you can make them as long as you want. Use two nuts and a washer on the inside and a nut a washer and a wing nut on the outside.

Enjoy watching and learning from you videos! Always clean setups

When painting MDF: mix white glue with water (or wood glue with water) and brush onto box with a chip brush, allow dry time, then paint. It will seal the pores in the wood so the paint/stain doesn't soak into the wood, leaving a dull finish. I didn't come up with this trick, but have done it and can confirm it works.

PARKER THE BASS HEAD has done it again.. Keeps me coming back week after week.. So I am guessing you are also loving the new Marts Amps also???

Wow!! I love it 💯 It's loud and your box looks amazing 😃

Looking good. 👍👍 I like the look of bigger subs.

WOW that's awesome Parker simply banging love your channel and work truly inspirational

Just wait till you got them broken in

Making me miss my old setup watching this build, zv4 18's two Ampere 3800's strapped at 1ohm. Thanks to your channel and some others I'm dipping my toes back into audio after years wish my wallet luck lmao

Shit looks and sounds good brother. Can't wait to see what it meters. Love your channel.

Just had a customer order from Big Jeff audio. He bought that exact five channel. I called them on the phone to confirm that item was in stock they were extremely polite and Very quick delivery! Jeff Audio for the Win!

Your box don't look much different than the custom box I spent a decent amount of money on lol. Good job man!👏👏👏

Yep I can't wait to see what numbers it does once you got it dialed in great video my man this is the content that I login for

Exciting to see this coming to a completed build.. I can already see in the very near future your bubble is going to pop and it will be a 4 18s wall build..on 2 marts 16ks

Hey, use rubber grommets on the inside and outside of your box speaker terminal bolts. I always recommend this they aren't expensive and they keep your box from getting pressure squeeze marks and it's just a little extra protection just in case.

Awesome another banger parker

Looks Beautiful Parker!

Love your videos i have learned alot from you nice and clean wiring and hits hard

Damm bro that's one hell of a set up hopefully one day I can meet u in person great content keep up the great work

Man I'm a big fan of your I've learned a lot from your KZfaq channel

The enclosure looks very, very nice! 👍

More great Content! Keep work’n man!

I've never owned 18s, had 4 JL w7s 13s and 4 JL w6 10s in a 2001 eclipse gt. Had 2 kicker 15 L7s in another vehicle, but 15s are as large as I've went. I've seen people running larger subs for comps, but for my daily drivers, I've personally never seen the need. Thank you for showing them to us though. Very useful and interesting info. Thank you for your generosity and the opportunity 🙏, stay well and be safe brother.

Looks good Parker 👍😎

Thanks Parker and big jeff.

Love the box!!!

Nice give away. Big Jeff really stepping up!

LOOKING AWESOME 👍👍👍👍

You are loving the basshead dream!

time for the great moment🔥🔥🔊🔊

I be watching all your stuff parker shit u be doin some Kool stuff

Lol the fire extinguisher, this is how a true bass head plays it safe

Sounds Brutal... got the fire extinguisher 🧯 shaken

Damn this goes hard!

Yessirr I got 6 18s now but started out with 15s and 18s just take lows so much better👌

Your smile says everything we need to know 😅 its a beast!.

Done both and have been a subscriber since the beginning yo!!!

Sick af parker

Rock on parker

Insane build my man lol

That's right Parker!!! Love your content. Hate when ppl talk bad on your channel like they know better or do better or can provide better. But yet I don't see no channel being made by them so they still hating from the sidelines crying with their Sony Xblows!!

There is some wire look that is specifically made for RCA wires. It helps block the interference.

I had two Skar Evl 18s in my Tahoe and I thought that was loud😅 but your System definitely sounds good.

Another great #1

Nice system 👍

Looks similar to my box for my 12s lol! Nice!!

If you still get whine after swapping out your rca cables then try to either ground the rca's negative to the vehicle itself or if still hearing it then get yourself a cheap ground loop isolator they usually eliminate all motor static interferences....

Keep kicking bass 💪🏻💪🏻

Nice job

I have Love for the 18” sub my whole life. My 1st build was (1) the Punch 15” sub with the Punch 45 and my 2nd build was also in my 89’ Honda CRX was (1) the Punch 18” sub and my the Punch 150 which was “Awesome” for the time in the early days and I built my single 18” enclosure in Votech carpentry 1 class in high school sophomore year on some of the finest shop equipment money could buy. Best looking enclosure I’ve ever built and I did fab “MANY” in High School (9-10 grade Carpentry 1 / 11-12 grade Carpentry 2 ) as my Legal hustle, I built boxes for the entire school & community known as the Enclosure King or “the Box Guy” putting all the local shops out of work in their shops on their enclosure builds because this was before pre-fab boxes. I built anything from (1) single sub enclosure to (8) 15” subs in bed of mini-trucks with snug tops, I made a small fortune in high school on subwoofer enclosures for 4 years in the “ Bass Beginnings” having a state of the art wood shop at my leisure at my Vo-tech. I started out with high end gun cabinets for guys and China Hutches for women and when subwoofers hit the South I never looked back! Rules were I had to turn in a Complete drawing for a grade & people had to provide ALL materials and deliver ALL materials on site (wood, screws, glue, carpet or paint) and my teacher was so cool telling me did Not want to see any money being exchanged at school. I took alot of time & I was REALLY proud of this slanted 18” single enclosure painted in black with neon splattered paint. After all this was the 80’s and it was a big hit at the time instead of carpet! I had a friend from local electronics store (Hooper’s Electronics) that worked out All my enclosure volume for sub sizes that was a mathematical genius so we had a winning combination as a team for I was the builder and I sent all my customers to him to buy Alpine, Rockford Fosgate ( the Punch), Kicker(subs only back then), MTX( the Red Terminator Series Amps & subs 🔥) & Linear Power was All the Rage back then!#thePunch#”80’sBestofTimes”#🔊@ParkertheBasshead

Getting down Parker 💪

i love this build !!! i have a slight feeling of envy LOL... well ALOT .. lol.. ugh, i want this soooo bad !!!!! congrats on your awesome achievements and work , dedication parker your the MVP.. also thank you to BIG JEFF YOU sir are LEGEND !!!!

on boxes i always make terminals like these, imo the best and cheapest way to make proper terminals...just i mark them by painting the ends of the bolts with red and black colors

Nice looking enclosure, but one question, no round over on the port entrance?

I love that amplifier

Sounds good so far on headphones

Badass 👊

Awesome, The Big 18” Beast sub and it’s a Sundown to boot! I’d Love to have two Sundown 12” DVC2 with a pair of Down4Sound’s JP8s slaved on each sub because I ended up buying 2 when they were on sale!#Down4Sound#JPAmps#JP8🔥🔊

Ive been waiting for this giveaway to actually happen😭

18s are my dream and hopefully one day I can reach that goal 🙏🏼

Parker, have you ever done a video on building the loudest system only using the factory electrics (alternator and battery) ?

That skar joke had me cracking up😂😂

Enclosure looks great

Nice

I'm pretty sure this build can do over 150 db Very easy. Good job. I love 18s 👍🔊🔊🔈

Jus an observation, but aren’t those recones? They look like they have spl surrounds, besides that love ur videos keep do’n ur thing

Dat bit beaten!!

Parker, use 0000 grade steel wool from a hardware store and use that to hand polish the box, it will make the finish smooth

I remember when Parker started his channel and mfkrs would troll him because of his low budget builds. Look at him now! Congrats Parker love your builds and content

You also gotta remember you're so dealing with Sundown now, and 18's at that 😎

Going to upgrade to 4 15s once I can find a box builder in Kentucky

Need some help… I am putting sound system on my boat and I have the Skar 1500.1 marine amp but needing advice on should I go with the EVL 12 loaded enclosure or the dual 12 svr loaded enclosure??? It’s going in a compartment behind the back seat also.

After I finished building my 2 custom D2 400oz 15s that are now at half ohm on my cab45 on lithium I had a small chip on the bottom of my windshield from like 5 or six years ago that's lived through the pretty decent setups ive had but after a couple days of the new setup my windshield cracked all the way to the top. I have Mixed feelings on that one it sucks my windshield is toast but the idea my subs cracked it from the bottom to the top is pretty cool. It does flat out slam now but I'd say the reason it cracked is it's a grand caravan so the windshield frame flexes big-time and it was chipped already so it's not because subs are so insane it broke my windshield...

Don't open that Dr Pepper! ROFL!

Does anyone have RE Audio anymore? I'd love to see some of those old subs put to the test. My 12's have been going strong for like 15 years

That’s crazy your happy thst 2 18’s floated a napkin. I was actually thinkin it would be more. I had 2 skar zvx12’s on a smart 3 a sub and I floated better. I feel like there could be more wind

You should review the new H series from Trinity audio.

Why Marts tho. Why not DB? Or SP salts? Looks great though. Put the taramps back?

Hey parker! Quick question what screws did you use to mount those heavy subs?

I have a single 18 And that makes me Tap out. So Honestly 2 18" subs is a whole different monster

Dude in the future if your going to take the time to build a pretty box, instead of a black sharpie use a red and black paint pen to mark the ends of the bolts. Looks way better! Great job on the box my dude!

I have 1 18 in a hhr pannel in a 7.4 cube box. Under powered but still nasty

Big subwoofers

Hey bro i'm debating on going with 2 18sv3 or 4 ab xfl 15s . What are your recomendations ?

hey parker or anybody else who can answer,how long should the ports be,and how far should they be apart,i'm thinking about building my own 18 inch box,real soon

Hey Parker, nice build. When you get a chance can you give a demo playing Young Jeezy- Hypnotized and Gucci Mane Ft. Oj Da Juiceman- Stealing, Those songs slap super hard👍💯

Come on parker... always seperate power and ground from rca's. One the first things we learned.

Grounding your rca outputs from behind the radio fixes that whining.

you should do 3 or 4 18s

Hey parker. I just popped my 10s. What is a decent brand of 10s that are cheap. Sumn that won't blow apart for around 100 dols? I'm a def budget banger.

I was wondering if you can test a DS18 HOOL-X12.1DHE HOOLIGAN 12" High Excursion Car Subwoofer 4000 Watts Rms 4" Dvc 1-Ohm

Where would I find the box specs, to build that box

Can ya do a video on a DC AUDIO XL 15.

Wats the song name u playin when u float the nakin the first time

We have BASSSSSSS!

You should try upchurch hydias 7

I really could use a 5 channel amp. Love deaf bonce when I got back into car audio a couple years back from watching YOU and EXO, JACOBVIRAL and I saved and bought a full deaf bonce apocalypse setup.

Oh nice system!🤗💪👊👍