Hello, here is the replacement netting for it sunjoyshop.com/products/sunjoy-universal-mosquito-netting-for-11-ft-x13-ft-wood-framed-gazebos-1?_pos=1&_sid=5823c3c19&_ss=r

Yes, 3/8" wedge works. Or you can drill the concrete using the Bosch BM5000 Fast Spiral Masonry Set.

@@SunjoyLife Hi there - does Sunjoy have instructions for two options you just discussed, or are they included with the kit? I will be mounting on ~ 4' thick concrete pad. As you can tell by my question, I don't work with concrete drilling/mounting often. And we have BIG winds where I live, so I want to do this right. Kit arrives in a couple weeks (11 x 13 like above). THANKS!

That’s why it’s not called a wind joy

Hi! I just completed this exact gazebo tonight and was able to reach all bolts at the top of the roof standing on a 8ft ladder, I did have to stretch with some weight leaning on the frame but most weight was still on the ladder!

@@Factorydirectdesignersworkroom any tips for putting up the middle roof beam? It's pretty high up there, and also quite heavy - we're to that step and I'm a little nervous.

@@chelseamurray3416 Hi there! I think this will be easier than you think! I used an 8ft free standing “A” frame ladder on one end and my wife was on the 10ft free standing ladder on the other, we walked it up in sync until she could rest it on the top of the ladder and climb the rest of the way than we rested the beam on top of the wood frame and I bolted my end and then I went to her end and she got down off the ladder and I went up and bolted her side. It would have been easier and safer if we both bolted at the same time but my wife is not mechanically inclined but that’s ok!

@@Factorydirectdesignersworkroom Thanks!! We actually did just that last night and it was way less of an issue than I imagined it being in my head. haha.

The roof is design of hold thousands of pounds of snow in the winter.. so one person probably isn't too much