I've learned more from Sunny about VLANs than anywhere else.

So basically Native VLAN traffic does not need a tag to travel, that makes it so useful. Thank you for sharing your knowledge.

I really appreciate your teachings. You explain complex topics so simply for everyone to understand. Thank you Sunny

Enjoy watching your videos which explain things clearly within 10 minutes. Like the way you speak - not too fast, word by word, very clear. Also, like your closed captions. Please keep up the great work!

The best explanation i've seen. Not only what it is, but also how it came about and what it is used for.

Sunny your explanation is always super easy to understand... Thanks for sharing such wonderful knowledge with the entire community.

Great lesson Sunny. As others have said all of your lessons are well thought out, clear, concise with really well communicated explanations on the basics and more advanced topics. Thank you

Exactly the information I was looking for because we have computers connected to VoIP phones but we want to keep VoIP traffic separated on its own VLAN. Thank you.

I just came across this channel and this gentleman explains these topics so very clearly. I am really hooked here. Good job sir.

Thank you so much. I've finished the Cisco networking academy classes but never fully understood the purpose of a native vlan and why it even exists.

When the right person explain the big confusing thing at many people should be easy thing at the end

"The native VLAN is a per trunk, per switch configuration" - this helps. Thanks!

BEST IT INSTRUCTOR I HAVE EVER WATCH!!!! THANKS FOR SHARING!!!!!!!!!!!

You are a very talented instructor. Thank you Professor :)

I have been searching on the Internet for what is Native VLAn and it's purpose also What traffic is going through the native vlan from days. Finally..I got my answers in this video. Thanks a ton.

"the angel" number , I had to think twice about that , you stand correct

i am getting ready to take my CCNA exam, and literally still didn't get the difference in between native and default vlan, especially when native in default is VLAN1. So this video definitely helped.

Awesome work mate. I really appreciate your take on the topic and the visualizations illustrate everything perfectly. Thank you!

You are the best. Your Sunny table made my practical exam a piece of cake! Thank you again, Sir!

Sunny! Your explanations are detailed, simply, and easy to understand! Many thanks!

Sunny i appreciate your teaching ways and more so the way u explain these things may Allah increase u in knowledge

Really appreciate you teachings, very simple and effective.💪

Thanks for a clear explanation on Native Vlan. I have a suggestion: the telephone exemple is a great way to explain the native vlan usefulness. I suggest you add another pair of PC/computer to shwo that you can assign a different vlan on each trunk port. Thank you. It took me a while to be familiar with the concept. you helped me a lot.

Thanks sunny, this is the explanation that everyone needs!

Thanks Sunny, your education is very useful, your explanation is clear and can be easily understood.

It's nice simple explanation. Love and respect from Anand Bharat.

You should write a book with illustrations, Sunny. I would buy it for sure

Short.Precise. To the point. Well explained 👍🏻

Hi Mr. Sunny, you explained very sweetly and clearly , i enjoyed the content. keep it up

Great to have found your Videos , Sunny. So well explained by you

Sunny, thanks for your post. It has all the details that I need to grasp the concept of Native VLAN. Keep it up Sunny.

I wish I got the chance of attending your physical class. But all the same thank u so much!

I have no idea about vlan further more native vlan but now I have. thank you very much

Outstanding! I really appreacte your efforts, time and explanation which are great and easy to understand but i would like to request you that if you write/put the steps (how to create vlans, switch port, trunk, voice vlan and data vlan and etc, below the description of this videos and other videos and if you have free time then make it would be more than great, so i am waiting for your response as soon as you can. Thanks alot

This video is I am looking from ages.... Awesome work

another very clear understanding video! Thanks Sunny

sunny rules. not only are the vids great but the little jingle at the end is pretty awesome too...

Great and clear content that helps learning process, congratulations!.

good scenario, thanks Sunny

Great explanation, Sunny! Thank you so much.

You are such a great instructor

This was very helpful. Thank you!

Your explanation is extremely high helpful and gives pretty much knowledge. Thank you very much, sir!!

Sunny, did it again! 🙂

Thanks for explanation. I like it very much..

Very clear explanation thanks Sunny

Thank you so much Sunny!! Awesome work best teacher

Sir, plz make a video on differences between subnet and vlan

It was really usefull for me, explication was so clear, thank you Sunny,

So informative video! Thanks a lot Sunny!

You have a great channel 😊

Native Vlan was very explained.

Great job, for a first timer like me, i did understand, thank you Sunny, rock on!

Ur videos always helpful and useful..

very good explanation..great sir.❤️❤️👌👌

Thanks you for sharing the knowledge.

Thanks Sunny!

Like to check if you are giving VLAN 10 as Data and Native VLAN in your VOIP example ?

Thank you for this!

One word “BEST “

great and very useful and on target , keep rocking

Simply great tutorials....

Thanks for the video!

Simply awesome video!!!

We cannot change the default VLAN. We cannot even delete the default VLAN. It is the default setting. It is VLAN 1. - - - ok just move all the ports to a different vlan # int range fa 0/1-24 # switchport access vl 5 (or any)

Thanks Sunny, great explanation!

i don't understand one thing. if i have two switches connected, i set the native vlan 10 as native vlan, if the traffic flows without tagging on the trunk i have no problem to let pc A and pc B to comunicate, but if pc A has to comunicate with a pc C on an access port with pvid 10 on the switch i need an hybrid port, so i can say if something untagged comes to the port set the tag 10, so pc A and pc C (the one on the access port ) can comunicate. i dont find very usefull this scenario.

Omg this is so helpful! Thank you 😭

now it cleared so much for me about native vlan .thanks .

Hello Sunny You explain verry well. I Never see this. You sould be teacher Thanks Thanks

Thank you very much

Great as always!

Does anyone now how to make these clips that show the red dot (traffic) moving down the line? Im wanting to make some animated presentations for work but now sure how.

Great explanation as usual making things simple.

Question, from the last example about using the naive VLAN, what would happen if Computer that connects to up phone also has VLAN tag?

Very helpful. Thanks!

FANTASTIC !!! THANK YOU !!

Thank you!

Excellent ... Well done ...

Another useful tutorial...

2:43 I thought the lucky number was 888

awesome video sunny, you are genius.

Great job

Best example !!!

Im using a cisco switch 2960 and when I configure the native vlan I can see it with the show int trunk command, but I never created that vlan so I do not see it in the show vlan brief, why? does switchport trunk native vlan not create the vlan? or it is not required to create it manually?

Sunny, can you give us your opinion on where the industry is heading and if Network Engineers will be obsolete

Love your accent. Very helpful lecture

very good content, thank you

Thanks! that's very informative

Very good video

@Sunny Classroom, can I ask you about best practises for more than two native VLANS? I need to do upgrade my distribute switches from L2 to L3. To do this I will need to create new networks admin subnets for all access and distribute switches. During above procedure we will have transition period (several months) where I will need to have (on my core switch L3) several VLANS configured as a native on uplinks to distribute switches. What about such setup and what should I remember or pay attention on?

Muito bom!

Dear sunny sir make video on SVI.

VERY CLAERLY TO EXPLAIN

Where do native vlan frames go once they reach S2?

Damn bro, this is gold!

Hello Sunny Do have to include or allowed vlan natif on trunk link for example : vlan native 100 vlan 10 and vlan 20 switchport trunk encap.. switchport trunk allowed vlan 10,20 switch mode trunk i have to allowed vlan 100 (switch trunk allowed vlan 100,10,20) or not and why.

in case we use 802.1q the data between two switches will be tagged or untagged please ?

VLAN 1 is always the default vlan

Would like to ask, for the VoIP part, the PC Vlan 10 will be tagged by the IP Phone then forward to switch, am I understand correctly?