Super Rusty Spare Wheel Restoration

Рет қаралды 8,009,059

6 жыл бұрын

Please read the full description for any information about the video.
If you would like to send me something to restore, tools to use or anything to support Restore It, please send to:
Restore It Mail Box
PO Box 50
CHATTERIS
PE16 9AZ
Subscribe for Weekly content!
Tools used in this video:
Tools & equpitment used:
Quartz Lacquer - goo.gl/8PTVKM
Rust Remover - goo.gl/13gopW
Base Coat Paint - goo.gl/mWhufG
Moldex Full Face Mask - goo.gl/NNYGrv
FGL 5 Spray gun - goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - goo.gl/cHTJS2
Colad Washable Overalls - goo.gl/3Css9E
Colad Mixing Cups - goo.gl/8DYmE8
Colad TurboMix Sticks - goo.gl/cYZfks
Colad Synthetic Paint Strainers - goo.gl/H79ZgL
Steel wire bits - geni.us/keyaD
Rotary Tool - geni.us/HGed
Concentrate Degreaser - geni.us/yUn9
Mannesmann Socket Set - geni.us/HCDZ
I bought this wheel from the scrap yard for £15. Once I got it home I realized it had a brand new Pirelli P3000 fitted. A perfect match for a Restore It video.
First I removed the air from the tyre. I then struggled to get the tyre off as the rim was so rusty. Once off I removed the wheel weights and valve. Once they were out of the way, I began to remove the loose rust and dirt with a metal wire wheel and rotary tool. Once most it was off, I placed the wheel in the blaster and blasted it for what felt like a lifetime. The results were not adequate. So the wheel went off to a friend's more power blaster, where two different grades of media were used. This gave the wheel its original colour back. But it was pitted pretty much everywhere. The filler was used to smooth out all of the pittings and imperfections. It took a hell of a lot of filler and sanding to get it close to acceptable. Once I thought I satisfied with the surface, I set about priming the wheel. I then added more filler and did more sanding to completely remove any sizeable imperfection. I then added the colour coats and lacquer coats. Once dry I took the wheel and tyre to a professional fitter as to not have the wheel scratched. He supplied a new valve and air. I then added tyre shine and the restoration was complete.
This wheel will not be used on a vehicle. This was for aesthetic's only. A personal challenge I set myself.
Disclaimer: I am no professional. I am completely self-taught and would appreciate any feedback, advice or constructive criticism.
I don't add music to these videos so that you can choose to listen to what you like if you would like to.
Become a patron to win the wheel featured in this video!
Patreon - / restoreit
PayPal Donations - restoreitchannel@gmail.com - If you would like to help towards more tools and projects.
Follow us on Social media to keep up to date with videos and giveaways.
Twitter - / restore__it
Facebook - / restoreitchannel
Instagram - @RestoreItChannel
Patreon - / restoreit
Discord - I now also have a discord server if you want to chill with like-minded people and maybe learn something new. - / discord

Пікірлер: 1 900

@JustAPersonWhoComments 2 жыл бұрын

No annoying music, no talking, plenty of info, beautiful shots, masterful work.

@gameflew7683 6 жыл бұрын

no garbage speech.... no stupid music... just real hard work and simple editing which is awesome. please make more videos like this. thank you.

@jaihanumanjaihanuman9337 3 жыл бұрын

Yes right

@bro_street 3 жыл бұрын

And a cute cat 9:50

@smanaces 5 жыл бұрын

The material alone would've paid for several rims, blah blah blah... Thank you for putting the time and showing the full process in all your videos. The patience and workmanship is fantastic!

@mk-jl3zd 3 жыл бұрын

I respect your enthusiasm in the job you’ve set your mind on.

@Kurosaki990Ichigo 6 жыл бұрын

You just did 300 bucks worth of work on a 20 dollar wheel. Subscribed.

@dan_6915 6 жыл бұрын

Kurosaki990Ichigo Perfect repair man !

@cinabolic 6 жыл бұрын

Kurosaki990Ichigo IT WAS SENTIMENTAL!!! 😂

@syro1er 6 жыл бұрын

Big facts😂😂 if u put the spare on is still uneaven so about 60 miles on it below 55mph 😂😂 did all the work as if it was a custom rim that wassant off balance

@syro1er 6 жыл бұрын

Imagine doing all this work and then boom bsck to trunk to sit for a good year of no needing a spare😂😂 gunna need another restoration

@hajibabasarwari2212 6 жыл бұрын

شششش شششش شششش امیرمحمم

@hideouslyugly 6 жыл бұрын

I like the way the cat watches him, and still takes it easy! Good restoration, though very fiddly, taking it all apart.

@egoread 5 жыл бұрын

Понятно что это нецелесообразно, но процесс увлекательный, спасибо !)

@Sheptunofff 5 жыл бұрын

Your patience skill is stronger than anything in this cruel world )

@jacobstofmeel3619 6 жыл бұрын

Thank you for putting in the description that this wheel was not to be used on a vehicle again, as a mechanic it bothered me that you were putting body filler on it, so I stopped, read the description and found I could enjoy this piece of art you have achieved. Subscribed!

@MrCrawlerz 6 жыл бұрын

As a tire tech that bothered me to but now that I know it’s an art piece I can relax about it haha

@frankunderwood8357 6 жыл бұрын

What is wrong with putting body filler on the wheel? There seemed to be plenty good metal left, so strength should be fine. Only problem I can potentially see, is that the wheel is susceptible developing leaks. Because of the mating surface between tire and rim having a thin layer of body filler that can break off creating said leak.

@jacobstofmeel3619 6 жыл бұрын

Frank Underwood. A wheel has to be perfectly balanced for a car to behave properly and safely on the road. The wheel would be fine but when the filler comes off it will cause the wheel to be out of balance and unsafe. A little vibration at the wheel while magnify through the suspension components and causing premature wear on the suspension and then it's a snow ball effect from there one wards to making the car unroadworthy if not addressed.

@frankunderwood8357 6 жыл бұрын

Ahh, makes sense. Reminds me of a top gear episode where they eyeballed welding a new set of wheels on the outside of the original wheels. Ended up with the whole rear end failing.

@BigTCars 6 жыл бұрын

I was in the same boat as you. I was like NO! NO BODY FILLER ON RIMS! ARE YOU NUTS!? It is unfortunate that this is still one for the "art" bin.

@davidcoats1037 6 жыл бұрын

Awesome job man! People that “get it” get it. People that don’t never will. Keep up the great work and videos. 👍🏼

@hunterofliars9600 5 жыл бұрын

I really love restaoration videos. More please. I watch every second.

@skodakatie7341 5 жыл бұрын

Amazing result, great restoration!!.

@janjoshika 6 жыл бұрын

Proper job! I have 4 of these to do on an old Toyota, cheers for showing me how!

@kjamison5951 6 жыл бұрын

Thumbs up for the cat too! No job is complete without a furry supervisor! Great job on the resto!

@RuslanIbragimov1988 5 жыл бұрын

Тот случай, когда сам процесс приносит удовольствие! Мастер своего дела 😀

@ph7ss564 5 жыл бұрын

Good job. Very satisfying. Salute from Malaysia 🇲🇾

@SjoerdJongerius 6 жыл бұрын

Meticulous, minimalistic and a comprehensive story without words. Love the environment and working sounds. To my mind you’re a experienced restorer and you know your way around a camera, lighting and editing software. Anyhoooo....a new sub.

@urbexandbrokenthings4806 6 жыл бұрын

Mind blown!!! we just discovered a new disorder ...Obsessive junk restoration disorder! keep up the good work!!!

@muhammadsajid58 6 жыл бұрын

@user-kv5ed4dl3b 5 жыл бұрын

حلوووو

@huusseins 5 жыл бұрын

Lol that's an interesting disorder

@adrianm860 3 жыл бұрын

IT GIVES ME ALOT OF JOY WHEN YOU COMPLETE ANOTHER PART FOR THE BEAMER BRO KEEP IT UP!!!!!

@Rickanroc 5 жыл бұрын

Thinking about, normally those wheels are painted with really basic powder coating so that's why it rusts so badly and considering what he did (sanding, primer, lacquer and stuff) it may be way more durable than the original coating tbh.

@JenixLifestyle 6 жыл бұрын

How about restoring that cat?

@moth.monster 6 жыл бұрын

I think a "cat restoration" where you just give them a good brushing would be a fantastic video :)

@mnight207 6 жыл бұрын

DjJenix ROFL. Youre the best!

@mymetacademy6990 6 жыл бұрын

good comment

@okterb 6 жыл бұрын

Buy new one cat! lol

@persimonsen8792 5 жыл бұрын

Guess, that you can't do that with a spraygun.

@kunu98 6 жыл бұрын

This channel needs 10x the amount of subscribers. Well planned out videos with a lot of details.

@spencer82rocks 4 жыл бұрын

All of those effort just for four lugs I can’t imagine how much more to 5 lugs forged wheels and how much you’ll charge I mean it’s perfect restoration without any shorts cuts,amazing ❤️

@stevenwolfe7615 5 жыл бұрын

Best job I've ever seen done thanks for sharring

@billybobjoe198 6 жыл бұрын

Very impressive result for what it started out as. Skill, time, and motivation. Very rare combo. I would figure this would take me 30 hours or more to do. Keep it up friend.

@hyp3rk1ll_aoc39 6 жыл бұрын

This was a fun watch. Love seeing old discarded things given life again. Subscribed!

@chevbelair 5 жыл бұрын

People who are negative don’t get the point of “restoration” excellent work

@e-mastoras 3 жыл бұрын

The style of your video is very useful. The speechless is fantastic idea. Everyone can see and understand what are you doing from the entire world. Well done.

@user-sj9xm7zz5c 6 жыл бұрын

10:00 the quality inspector 😂😂😂

@brucewarrior7845 5 жыл бұрын

the Cat* is the most responsabilty Quality Control 😊

@jhuntosgarage 6 жыл бұрын

This was good. Reminds me of a movie I endured about a tire that could make things explode with its "mind".

@TheFakeFatLegitimate 6 жыл бұрын

Strangest 1 and a half hours of my life

@brandonallen5930 6 жыл бұрын

What??? A movie about a tire that can blow things up with telepathy??? Did I read that right ???

@m2torres97 6 жыл бұрын

That movie was weird but very interesting to watch.

@simplyng 6 жыл бұрын

J. Hunto's Garage I WATCHED THAT MOVIE

@harryjnr2335 6 жыл бұрын

Yep that movie is messed up!!

@donizetegsconstrucoes6706 5 жыл бұрын

Parabéns pelo serviço muito bom mesmo

@matabufalez50 4 жыл бұрын

Perfect repair for an old 2005 tyre. Awesome, it´s new attending to the thread, but it is like a stone.

@Namesakes.unit-x-10sq10 6 жыл бұрын

Buying a brand new wheel would probably be cheaper, but i applaude your awesome work! It turned out really nice, and was probably quite a learningful and satisfying job :)

@Amor1990 Жыл бұрын

Buying lol

@danutplesu3352 6 жыл бұрын

I see reason in your madness :) Keep them coming. Subscribed!

@luiz1516 5 жыл бұрын

Parabéns pelo capricho amigo mereceu o 👍

@jojoyz761 5 жыл бұрын

I really appreciated.. Ignoring the cost ignoring the peoples who makes irrelevant comments... The struggle, professionalism and your hard work towards these kinda of Jobs is much much appreciated.. GOD Bless U.. From Pakistan

@RestoreIt 5 жыл бұрын

Yousuf Zafar thank you Yousuf. I really appreciate this comment!

@austinbuck8108 6 жыл бұрын

This is a brilliant idea for a channel! You’ll have 100,000 subscribers in no time. Keep it up!

@denizogu3004 6 жыл бұрын

Austin Buck makina

@erichvondaniken1498 5 жыл бұрын

hey dude, you are heavy perfectionist

@lanfrancosenno7536 3 жыл бұрын

Complimenti per la tua professionalità e tanta pasienza😀👏

@TheMcooper17 2 жыл бұрын

algorythrm reminding me of this, brilliant work i have my escorts little 13 inch steelies off ready for clean and repaint

@misteryman5109 6 жыл бұрын

Solid work! Earned a sub.

@lucasd.r9267 5 жыл бұрын

Curti o trabalho de pintura ficou legal mesmo, agora só não acreditei que esse pneu sempre foi o mesmo no final hahaha E para ficar zero mesmo tirou até as pedrinhas

@wesleyricarte6692 4 жыл бұрын

mas um pneu tão velho como esse não pode ser usado. Já perdeu as características de segurança pra rodagem... imagino que ele tenha feito pelo vídeo e grana que fez, e talvez pra colocar de enfeite na parada

@volt6008 4 жыл бұрын

Smiles the entire video. Nice job.

@milagrossmith4891 8 ай бұрын

Great informative video. Even though some of the methods are beyond my skill level, I feel can still do this .

@Starlight_GT 6 жыл бұрын

I said no, it's too far gone. Well, slow clap and standing ovation for you sir

@thetraindriver01 6 жыл бұрын

Looks great 👍👍👍

@techmaven5900 5 жыл бұрын

I'm glad you kept the near new Pirelli...Nice to see Kitty supervising.

@user-ot3yn1oq2f 5 жыл бұрын

Отлично, респект человеку который может и показывает что это возможно сделать было бы желание!

@semihsener2263 5 жыл бұрын

Good job, perfect restoration.

@arulmurugan7801 6 жыл бұрын

u done a good job. Great video. Good effort

@patrickkamgang6433 3 жыл бұрын

Here you have the job for just one wheel...salute dude!

@marcelogomes2951 4 жыл бұрын

Very good job!! Congratulations from Brazil!!

@Guidetr 6 жыл бұрын

very nice job. pls post more

@AddictedtoProjects 6 жыл бұрын

Awesome work, really well done! You have a new subscriber! :)

@zaijinealfaro5231 6 жыл бұрын

Addicted to Projects olio L

@Wreck-Gar 5 жыл бұрын

Excellent. I totally get it. Yeah you can buy a new wheel but it's your project, your baby. And at the end of the day you can say I did that. Great feeling. Keep it up 👍

@solstar4778 5 жыл бұрын

Looks brand new!

@Mr92cadi 6 жыл бұрын

Damn bro, nice job

@corivian 6 жыл бұрын

Gawd damn satisfying

@JcBoss.99 5 жыл бұрын

Good work, my congratulations, my friend. I appreciate your content. Greetings from Brazil.

@kingjlinza 5 жыл бұрын

Why is this so satisfying?!

@infernalGotYou 6 жыл бұрын

Subscribed! The crispy 60fps quality is very nice! What camera is used?

@MatsOland 6 жыл бұрын

Looks Great! And dont be afraid to go s bit closer with the spraygun, seems a bit dusty from that distance. Looks stunning tho:)

@naoyukisasanami 5 жыл бұрын

This is a great presentation for anyone owns a rusty classic Ferrari

@armandorodriguezduran2574 4 жыл бұрын

Excelente trabajo saludos desde México 🇲🇽

@HrHjaelp 6 жыл бұрын

Keep making videos they are great.

@satishd3868 6 жыл бұрын

supet

@kenrivers9757 5 жыл бұрын

The cats like aww jeez another one..he at it again..silly human😂😂😂

@gustawklops6690 5 жыл бұрын

Bravo... Great job !!

@chelamine 5 жыл бұрын

Very nice work!

@netmatrix75 6 жыл бұрын

I do not know what you would want to refurbish a steel wheel. But this is quite satisfying to watch. hahah

@dirkreimann9049 6 жыл бұрын

For Old-timer restos this is most likely the only way to go mate.

@cbaile 6 жыл бұрын

As you can see, the most important part of the job is proper cat placement.

@JGV_IX 4 жыл бұрын

Beautiful as usual!

@Badenhawk 5 жыл бұрын

Looks great and gold air. I would totally use it as a spare lol.

@-garagehit.472 5 жыл бұрын

Выгодное дело! 2 дня потратил,вложений на 40 $ . Получил 4 лям. просмотров это примерно 2000 $ . Теперь можно и машину купить. Молодец! Лайк!

@stasivankov676 5 жыл бұрын

И машину так же пескоструйка шпатлевка и уже 10 лям просмотров и уже можно остров купить и т д

@SketchersGER 6 жыл бұрын

Amazing!

@matthewbuirley9434 5 жыл бұрын

Nice job looks great

@simonbevan6959 5 жыл бұрын

Excellent work and very entertaining... and I think I may have spotted the Beemer at 10.26 😊

@rob-the-priest260 6 жыл бұрын

anyone else anxiously waiting for the cat to strike the green cloth?

@user-kc1wh4jb5n 5 жыл бұрын

Шпаклёвка дороже чем диск ,краска ,работа.что за необходимость.

@_Azamatt_ 5 жыл бұрын

Может просто спортивный интерес + куча свободного времени

@oglebchik 5 жыл бұрын

3.2 млн просмотров

@user-np9vd5ul9x 5 жыл бұрын

Чтоб впарить это говно подороже!!!

@hellcustoms5144 5 жыл бұрын

А-ху-еть, столько свободного времени я еще не видел.

@serega.wolf. 5 жыл бұрын

Пошел диск купил за 500_700 рублей и вуаля.))

@JoseRoberto-kb1pf 3 жыл бұрын

Quanto trabalho!vale só pelo prazer.

@Dallas-GTR-86 3 жыл бұрын

Now that was so Satisfying to watch great work man 👍

@endyman8255 5 жыл бұрын

Это тренировка силы воли мастера ! Респект !

@POZYVNOY117 5 жыл бұрын

Аааууу, комментаторы, человек вам просто показал преображение убитого, ржавого диска... ☝️

@Captain4Lug 5 жыл бұрын

Your a beast bro .. this was a crazy ass transformation 👌

@KaroKhatchadoorian 5 жыл бұрын

I would replace the rubber tire, since that one is 13 years old dated 2005. Awesome Video!

@carlosmagno2992 5 жыл бұрын

É muita mão de obra para recuperar um aro comum que se adquire no mercado na faixa de R$50,00

@MichaelMacGyver 6 жыл бұрын

I think you put more work into that rim than the company that made it!

@enricomcc75 6 жыл бұрын

Restore It NICE! you had actually applied double layer of primer, I'd tried to restored mine using WD40 and can-sprays only, you are making me ashame of myself... T_T

@danielzinhogames538 5 жыл бұрын

Isso se chama determinação parabéns

@Nimmbin 4 жыл бұрын

Great restoration work.

@RestoreIt 4 жыл бұрын

Thanks scott!

@LiftTech22 6 жыл бұрын

People that say "just buy a new wheel" dont realize this is your job. 62k people watched so far. He probably made enough on this one video to buy 100s of that wheel. Cheap wheel not worth it? Oh but it was. Oh but it was...

@broken_font1881 5 жыл бұрын

Dubber98 exactly what I was thinking. (☞ ͡° ͜ʖ ͡°)☞ KZfaq is a business, and he/she needs to keep making videos whether it be fixing a spare tire or making those awful slime videos

@ghassanalfarra8935 5 жыл бұрын

I'm not quite sure he's monetizing his vids, I have yet to see 1 ad

@broken_font1881 5 жыл бұрын

Ghassan Al Farra dude there literally was an "Airheads" commercial on this very video just as I opened this video to reply to your comment 🙄

@ghassanalfarra8935 5 жыл бұрын

@@broken_font1881 Dude, just as I opened up this thread to read your comment, a first ever commercial appeared, Netflix 😂 ..must have been some glitch in the matrix earlier on

@RestoreIt 5 жыл бұрын

Hit the nail on the head Dubber! Thanks for this comment man. It’s good to know there are people like you out there :)

@JMassengill 6 жыл бұрын

powder coating would have been easier but you did wonderful work! Nice Job

@mlinecomposites1 6 жыл бұрын

Johnny Massengill that’s what I would’ve thought would be better, powder coat it! and cheaper for a cheap wheel

@rahmathullarahmathulla3677 6 жыл бұрын

It is better to buy a new one. Too much labour and material used

@jabbawok944 6 жыл бұрын

rahmathulla rahmathulla It’d be a pretty dull video. “Guy buys a new wheel”.

@juanpegomez8683 6 жыл бұрын

Restore It Estas restaurando un bmw e30?

@wrongkey 6 жыл бұрын

what's the purpose of powder coating in this situation ?

@senoumix51 5 жыл бұрын

I am speechless...Subscribed.

@mikelopapa8139 4 жыл бұрын

Such amazing work

@user-dy6yl6zw7v 5 жыл бұрын

Я под столом! Потратить два дня работы и материалов на пару тыщ, что бы сделать попытку вернуть внешний вид ржавому диску! Который закорозирует в первый же год. И ладно бы покрасил узор какой то, так нет, просто форшмачно облил черный грунт лаком...