Supercharge Your AHU Troubleshooting Skills with This Exercise

No video

Supercharge Your AHU Troubleshooting Skills with This Exercise

Рет қаралды 4,602

Күн бұрын

In this livestream, I will walk you through troubleshooting an chilled water AHU service call. The customer complaint was for a symptom of the actual problem, so I will show you how to take the needed readings to get the right solution.
You'll learn how to:
Identify the customer's complaint and assess the situation
Perform the necessary tests and measurements
Diagnose the problem and determine the best course of action
Make the necessary repairs or adjustments
This livestream is perfect for HVAC technicians of all levels of experience. Whether you're new to the trade or you're looking for a refresher, you'll learn valuable troubleshooting skills that you can use in your everyday work.
Get 8% off at TruTech Tools with promo HVACTIME
www.trutechtoo...
Get tech support, training, and the Tech Blog at hvactimetx.com
techsupport@hvactimetx.com
hvactime@hvactimetx.com
Support my COFFEE problem through,
venmo.com/code...

Пікірлер: 30

@HelixtheCAT01 3 ай бұрын

Like how you go from the basics of "common AC". This uses a different medium

@cristianjavier1485 11 ай бұрын

Hello. Thanks for taking the time to talk about it. I hope I run into same scenario sooner. Have a god lunch.

@eimantaslapienis4662 11 ай бұрын

Great exercise! Thank you. Hopefully you can make more like this.

@isaacsanchez3966 11 ай бұрын

Keep doing what your doing these videos are educational

@carllungwitz5171 8 ай бұрын

Air bound coil

@GalacticAdventures69 11 ай бұрын

These are fun honestly

@bureaucratbayonet 10 ай бұрын

Pausing at about half way to say great video thanks so much. As soon as entering and leav8ng water revealed im thinking we wanna see a 10 degree split not 20. Been thinking refrigerant issues this whole time but its a little hard to picture what having a too high or too low superheat/ subcooling's effect would be on delta t. Other than that possible water flow issue is the only other thing i can think of after having come this far and eliminated other possibilities

@bureaucratbayonet 10 ай бұрын

After finishing this...what a great learning opportunity! I was also thinking restriction after the coil but have not had enough experience to run into a situation of insufficient make up water. Thanks again!

@anom2789 10 ай бұрын

thank you!

@joeycrack4294 11 ай бұрын

As far as the low static pressure,. I would check the office area for doors and windows open.

@bryangillis2515 11 ай бұрын

Keep up the content like this

@colejc 11 ай бұрын

thanks brotha appreciate the video

@rthompson968 11 ай бұрын

Another good one 👍

@strutt01 11 ай бұрын

BA dude. Thanks for your work.

@dennisbarkley1551 11 ай бұрын

Thanks😊

@Swiminfool139 11 ай бұрын

Amps on the motor fla / rla?

@HEFTYLEFTY303 11 ай бұрын

If your not getting adequate cooling to the space the vavs will end up driving wide open causing the low static problem

@MarcDiMillo 11 ай бұрын

Am I missing something? Why is vertical water column relevant in a closed loop system? Is the pump not a recirculating pump? Also, with the inlet gauge reading 1psi I would be weary of the reading unless it’s a compound gauge. The gauge might read 0 but the suction is in a vacuum.

@HVACTIME 11 ай бұрын

It is a recirculating pump but the column is still relevant whether its a closed loop or not. There has to be enough water volume to properly function.

@joeycrack4294 11 ай бұрын

Shouldn't the inlet to the chill water coil be on the bottom of the coil in order to keep the coil flooded, which will help to give you a lower or proper outlet temp,

@HVACTIME 11 ай бұрын

Ya i caught that after I started the training. I make mention of it through the class.