Supercharged Suzuki Samurai Walkaround

Supercharged Suzuki Samurai Walkaround - The Zombie Zook

Рет қаралды 74,025

4 жыл бұрын

The Zombie Zook walkaround is finally up! This video was shot some time ago which covers most of the modifications done to the famous Supercharged Zombie Zook and the project that got Zombie Offroad started.
This project was built over the course of a few years in the garage and also became my first engine rebuild after the original G13BA engine gave in. After a successful rebuild of the G13 I was still not very impressed with the power of the updated little engine and that's where the search for a stronger Suzuki power plant began.
Please feel free to subscribe and share the video if you enjoy the content, cheers!
Suzuki Samurai SJ80 - South African Model
Engine
G16A 1.6L 8Valve
Rebuilt with fordged connecting rods
1mm or 40thou overbore
Gas flowed head
Performance camshaft 270 Custom
SC12 Aisin Supercharger
Weber DCOE 40mm Side Draft
K&N Air Filter
Gearbox
Stock SJ80
Transfer Case
SJ413 TC with 4.16 Gearset
Zombie Offroad Cradle
Suspension
Stock SJ80 on 2" Susp Lift
2" Body Lift
Long travel rear shocks on custom brackets
Zombie Offroad Steering Damper kit
Zombie Offroad Extended Brake Lines
Axles
Stock SJ80 Axles
Rear Lockright Locker
Wheels
31" General Grabber MT's
7J Steel Rims -5 offset
Zombie Offroad 38mm Alu Wheel Spacers
Lights
Zombie Offroad Windshield Spotlight Brackets
27W LED Worklights
120W Flood LED Bar
Zombie Offroad LED Tail lights
Armour
Zombie Offroad Front Bumper
Zombie Offroad Rock Sliders V1.0
TJM 6500lbs Winch Synthetic Rope
Zombie Offroad Website:
www.zombieoffroad.co.za/
Drop me an email: hendri@zombieoffroad.co.za

Пікірлер: 87

@P.Trim69 7 ай бұрын

Sweet from over here n USA. That's a nice set up

@user-lq7fp4pj8t 4 жыл бұрын

One off the best Offroaddrives you could/can buy. In european forests, it`s because of it`s size unbeatable. A Samurai 413 NEVER DIES! Only corrosion..... I had 2 LandCuiser`s (BJ, FJ 40), 1 HZJ 70, 1 Volvo C303 (portalaxels!). Every one has his advanteges, but overall Samu rules. Where the others because of the bigger size had to go 4wd&reduction, you have to take only 2-3 meter for momentum and clear almost everything: No rocks, no crawling, diveing! Btw, Yours is imop not only one of the best, respect! Have fun, you deserve it, from switzerland

@jessebellis478 3 жыл бұрын

Zukis for life ! Sick zuki buggy rig !! Insane build ! Nice and clean

@oryray 10 ай бұрын

did not know the word hoon was used in south africa. love to see it 🇦🇺

@Suzuki-Jimny-Iijima 3 жыл бұрын

Jimny Samurai, who is fast on the road, is very cool.

@micklaporta4503 4 жыл бұрын

Great video , love your zuk, i'm building a 1.3 with a ko4 turbo in my tintop, keep the vids coming

@alexhardwick2855 4 жыл бұрын

Wow what an awesome looking Suzuki jeep 👍👍

@hoodyr6799 4 жыл бұрын

Definitely onto a winning combination there 👌

@HendriMouton 4 жыл бұрын

Works great for the purpose it's built for!

@fotomotoxxiii 4 жыл бұрын

I like the rig, good job on the front bumper!

@toddstringer9009 2 жыл бұрын

Vary well done!!! If everything goes right I’ll be picking up a 1988 Samurai in 2 weeks and shortly some of your light brackets

@financetips 2 жыл бұрын

You earned yourself a subscriber! Great video man.

@BigSkyMobileRV 4 жыл бұрын

Cool Zuk! Cheers from the 🇺🇸

@mozpassion8996 4 жыл бұрын

Love the car. Please give us more videos!

@clooperman3745 4 жыл бұрын

Loved the video, shows people what can be done to these amazing little vehicles, this one is superb, well done; a good few years ago l had a Suzuki SJ 413 LWB, it was pretty good but l could see several areas where it could be improved, l fitted slightly wider rims with 30" all terrain tyres, a 2" lift, front and rear ARB locking diffs, power steering, a heavy duty clutch, 6.5:1 low range transfer gears and a small front winch, these mods transformed its offroad performance but the engine was left stock, this supercharged Vitara engine would have taken it to another level, a friend had a SWB 413 with the same mods as mine but he fitted a VW 1.9 SDi engine into his and offroad it was better than all the Defenders, in standard form these 413s are good, modified they are as good if not better than anything out there. Would love to see more on this Vitara engine 413.

@captainbrossette 2 жыл бұрын

I have a SJ410. Just got it last year before winter. Also planing to build it up in summer as its completely stock military grade rn

@leedaleseidle 4 жыл бұрын

Sounds Awesome ! Please show us the jimny as well.

@johnot1168 2 жыл бұрын

Awesome looking Zook mate

@HendriMouton 2 жыл бұрын

Thanks Johno🤘🏻

@guylongley1573 4 жыл бұрын

Chop Styx is the name of my Zuk. Built 1.3 locked front and rear 6.50 t case with evil twin shifters. I like to play on the rocks. 👍

@dylanporras2655 4 жыл бұрын

Very cool. I'm almost done building a G13B twin cam with an Eaton m45 on propane. I was curious about the recirculation valve and some people tried to tell me it wasn't necessary since my throttle body is before the supercharger. I believe without the valve, the supercharger will unnecessary heat air and add strain to the engine at idle.

@HendriMouton 2 жыл бұрын

I heard the same opinions although it didn't make sense to me not to install one. How's your project going btw?

@riddoes 3 жыл бұрын

Epic Zook! I just shot a walk around on mine 😎🤩

@LakbayDiwaTV 4 жыл бұрын

What a weapon

@michaelsarahadventures 4 жыл бұрын

Great memories, what a legend :P

@Andrrew05 2 жыл бұрын

Sick

@IllusionSector Жыл бұрын

Now *there's* fiiiiiiiiiiiiiiiiiine Zookin'!

@Mraudiophyl 3 жыл бұрын

I need those pod light brackets!

@dariusarchibald4937 2 жыл бұрын

Lsi tracker with the 1420 cc sc14 supercharger ty for your vid gave me more confidence to just Put it in my the geo instead of my Honda work perfect raced a 2014 charger lost it in 3rd gear

@HendriMouton 2 жыл бұрын

Nice! How much boost pressure did it run at with the stock pulley? I had to bleed boost as it would run 13psi + and kept detonating in the dunes.

@dariusarchibald4937 2 жыл бұрын

About 12 psi I got a bov it’s set up like a turbo an I use 89 gas an if 87 I add octane boost

@dariusarchibald4937 2 жыл бұрын

Going do some vids of it in the near future

@romulusoverland314 4 жыл бұрын

Baie mooi zookie daai Hendri! Dink 'n stel fender flares sal hom mooi afrond!

@herbie53opf 4 жыл бұрын

Is dat Afrikaans? Als Nederlander moet ik eerlijk zeggen heb ik nog nooit Afrikaans geschreven gezien.

@romulusoverland314 4 жыл бұрын

@@herbie53opf Goeie dag Jan. Dit is Afrikaans ja. Stuur my 'n private boodskap as jy wil gesels. Groete Freddy

@ahuidog3711 Жыл бұрын

That's a samurai 2!!

@ludicrous8794 4 жыл бұрын

Buena maquina

@Oddman1980 Жыл бұрын

1:34 now that's interesting, the hood release is in the glove compartment even on a RHD Samurai. The theory here in the states is the hood release is in the glove box because it was originally a RHD vehicle, now I know it's done just to be weird.

@monicashley1 4 жыл бұрын

Hello. Is that an aftermarket cowl vent? I like it more than the scoop I’ve seen online in USA. I have a ‘90 JL. Looks like there’s a few differences between the two.

4 жыл бұрын

Nice to see the hero alive. How is working with the supercharger, any issues?

@LucianT944 4 жыл бұрын

good job! questions: 1.what Afr are you running in full boost? 2.no problems yet due to the solution choosed regarding you have not (i think you actually can t ) an intercooler? 3.what timing do you use? p.s. i have almost the same setup:)

@dariusarchibald4937 2 жыл бұрын

I got one in my lsi tracker raced a 350hp charger an won

@laurencemunro 3 жыл бұрын

Like jou prop kwaai 😁 Die hele build is baie netjies, jy kan die zook maar afshow en geniet! Is jy n Arduino expert ook? Jy noem nie regtig wat jy als daarmee doen nie, maar ek geniet hulle (ek het Spitronics se mini displays design en gebou) So wanneer gaan ons duine toe, wag vir my invite 😉

@jackgerberuae 3 жыл бұрын

@hendri mouton watse rims gebruik jy?

@ruddo1970 4 жыл бұрын

Love it! what seats do you have under those covers?

@HendriMouton 4 жыл бұрын

Bright red bucket seats, not the best looking but they're quite comfy on trails. If I'd replace them I would go for Suzuki Swift Sport seats

@ruddo1970 4 жыл бұрын

@@HendriMouton I was wondering if they were Recaro SR5's. I'd seen them from the back in few of your other videos, and now the seat in my tintop is wearing out i'm looking for a replacement. They do look comfortable! I might be doing a run to Fraser Island with some mates later in the year, assuming this lockdown is eased, and am dreading the 1200km drive there in the current seat. lol

@donellmuniz590 4 жыл бұрын

Clever adaptation of that supercharger. What did it come out of?

@HendriMouton 4 жыл бұрын

Thanks. Came originally from a Toyota 4AGZE

@user-lq7fp4pj8t 4 жыл бұрын

1 more: in switzerland they pay unbelievable prices for this cars. They slow them down 40/60 km/h; you can drive them at age 16 (60km/h), without licens 40km/h. Pricerange more than 12k SFR aprox. 13-14k$ for good one!

@HendriMouton 4 жыл бұрын

They're not the safest vehicles to drive on the road so it's probably for the best. My Zook can now cruise at 120-140 without much effort but it's still pretty dangerous if something goes wrong

@rafaeltorres678 4 жыл бұрын

Cab i ask the length of your con rod and brand ?

@hakunaxavier 4 жыл бұрын

How you fix the caster?

@meisterraul 4 жыл бұрын

Any details about the coil conversion? Could you help me with some pictures underneath or with the construction? I am trying to do a coil spring conversion, jimny front and 3 link in the back with panhard. You can see my video with the current progress. Thanks

@nikap211 4 жыл бұрын

i think that this samurai is the sj80 version with coils from the factory unfortunately this version never came in Greece so i have to deal with the bumpy ride of leafs haha

@meisterraul 4 жыл бұрын

@@nikap211 I cant believe I am such a noob :)) It was morning and I didnt payed much attention when I left this comment. You are right, it's a Sj80 :)) This car is avaible in my country but many consider it very weak, the suspension and the front differential.

@meisterraul 4 жыл бұрын

@@nikap211 I watched this video again and I saw it's a stock sj80 suspension :))

@nikap211 4 жыл бұрын

@@meisterraul i am following your chanel so you definately you are not a noob haha I know that it is weeker but i think it is better to have to deal with a bad differential and a bad gearbox than have a leaf spring samurai that needs a lot of money to coil it... The real problem with the sj80 is that there isnt a lot part available and the front suspension it isnt like a jimny so that a big problem

@meisterraul 4 жыл бұрын

@@nikap211 Thanks :) Use my setup and you will see springs aren't so bad. Yj springs on the back and rear samurai springs on the front. This is the best combination for a Samurai

@rodikaua9679 2 жыл бұрын

What about the steering? did you make any changes to it.

@HendriMouton 2 жыл бұрын

The idea is to retrofit an electrical steering assist column to help on the rocky trails.

@stanleydevilme172 3 жыл бұрын

I have an 1988 samurai, how and where can I get the supercharger

@romulusoverland314 4 жыл бұрын

Any idea how much kw the 1.6 motor is making now with the supercharger?

@HendriMouton 4 жыл бұрын

The butt dyno says double the standard power😃 The biggest difference was the insane amount of torque it made compared to the factory setup.

@regardtmaritz9950 4 жыл бұрын

Hi. Baie goeie video.. What kw and torque does it make?

@HendriMouton 4 жыл бұрын

Never had it on the dyno, only did road and dune tuning. Just made sure the AFRs are good and it didnt ping

@rafaeltorres678 3 жыл бұрын

Sounds good did 272 have great torque at low end ?

@HendriMouton 3 жыл бұрын

It's difficult to say as I never drove with the stock cam setup. I did swap out the charger and custom intake to stock once when I attended some leaks. It was dead slow with the stock carbie and no boost

@rafaeltorres678 3 жыл бұрын

Oh i an also planing to build mines to using amr500 with 40dcoe Can i ask what brand of your forge conrod and how long it is is it 120mm or 122

@rafaeltorres678 3 жыл бұрын

Im gonna try maxspeedingrod h beam conrod

@zachwelch1954 3 жыл бұрын

Great Vid. Any way you could share the cad file for the bumper?

@HendriMouton 3 жыл бұрын

Zombie secret unfortunately 😁

@davidgomes7946 4 жыл бұрын

Is the bonnet vents plate still available.

@HendriMouton 4 жыл бұрын

I can manufacture them on request. Drop me a mail at hendri@zombieoffroad.co.za

@dawgmelin699 2 жыл бұрын

Is the fuel economy any good ?

@HendriMouton 2 жыл бұрын

About the same as my old 1.3 on the open road, but she's thirsty when we hit the dunes

@yougear100 4 жыл бұрын

What kind of accent is that? Does any one know where he's at? Cool rig!

@brettwilson9181 4 жыл бұрын

time index 5:46 he says it

@HendriMouton 4 жыл бұрын

South Africa, Cape Town 🤙🏻

@sailorsanjoy 4 жыл бұрын

Amazing ride👍....subscribed have few queries regarding your supercharger setup , I'll pm on your email .

@dariusarchibald4937 2 жыл бұрын

How much hp did it add

@HendriMouton 2 жыл бұрын

Never had it on the dyno. The lack of electronic timing control at the time kept it back. The instant torque and driveability made it excellent. Looking at supercharging another 4x4 in die future.