Supertuner WRX Build Breakdown

  Рет қаралды 52,809

Supertuner

Supertuner

Күн бұрын

YOU’VE BEEN ASKING FOR IT! So here is a quick build breakdown of my wrx and where I’ve gotten parts from that you have been asking about. If you like the build or enjoy the channel please share with a friend who’d like it and help us grow!
Parts mentioned and project sponsors:
www.rallysportdirect.com
fifteen52.com
ignitionlogic.com
www.rpgcarbon.com
Engine drivetrain and suspension: min 1:00
Exterior: min 11:20
Interior: min 18:25

Пікірлер: 224
@11streetdog
@11streetdog 5 жыл бұрын
There are some cool wrx builds on the internet. But in my opinion this is the best. Wrc inspired subies are my absolute favorite. 👌👌
@Supertuner
@Supertuner 5 жыл бұрын
Thanks bro! Means a lot! Hopefully other people start to catch on too 😉
@koston777
@koston777 5 жыл бұрын
Clean functional build is always way better than flashy undriveable show ride. Great job!
@Supertuner
@Supertuner 5 жыл бұрын
Thank you for watching! Really happy with it so far 😎
@gabrielttenroc2906
@gabrielttenroc2906 5 ай бұрын
Imma do my car like this, I love the body kit so much and the car sits so nicely
@NathanElcoate
@NathanElcoate 3 жыл бұрын
Awesome WRX. Beautiful build and I live the way you explained everything. I have a 2.5 running 340HP in my 04 Club Spec. Similar to yours but still a ways to go. Lovely to see a really nice functional build.
@officialLINKSIS
@officialLINKSIS 5 жыл бұрын
This is great 👌 can’t wait to see what you end up doing for the dual caliper setup in the rear!
@Supertuner
@Supertuner 5 жыл бұрын
Thanks dude! Same, that will be a fun one!
@matthewnewsome9221
@matthewnewsome9221 5 жыл бұрын
Beautifully engineered, well done
@Supertuner
@Supertuner 5 жыл бұрын
Thank you!
@RX7Cody
@RX7Cody 4 жыл бұрын
Just really enjoyed this video and your work man! Beautiful car dude 🤙🏻
@Supertuner
@Supertuner 4 жыл бұрын
Thanks so much for watching!
@matthewnewsome9221
@matthewnewsome9221 5 жыл бұрын
You have given me some great ideas for my JDM bugeye wagon STI. Thanks man
@Supertuner
@Supertuner 5 жыл бұрын
Thanks for watching!
@kevincanfly
@kevincanfly 4 жыл бұрын
I like the direction you went with the car. Going to a traditional turbo setup and loosing the recirculating system, the wide body, and maintained the drivability of the car. I love HP but being able to DRIVE a car makes it a joy to drive. I have a ‘02 wagon I’m building, nothing special or worth bragging about but I would like to do the turbo set up you used. I’ll have to check out MAP conversations and see what’s up. Nice build!!!
@dazaboy68
@dazaboy68 4 жыл бұрын
Really well explained, very informative and to the point!
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching! 🤘🏻
@randythraen5091
@randythraen5091 5 жыл бұрын
Thank you for the video, this answered a lot of my questions!
@Supertuner
@Supertuner 5 жыл бұрын
Oh awesome! That was the goal! Stoked you got something out of it :)
@michaelsalinas9995
@michaelsalinas9995 5 жыл бұрын
Your a genius man, absolutely love the build
@Supertuner
@Supertuner 5 жыл бұрын
Thanks for watching man! And for the compliment 🙃
@jamesvzfighter
@jamesvzfighter Жыл бұрын
I love your car, its like something I would build on forza.
@abamero1291
@abamero1291 4 жыл бұрын
Man your car is really cool Thanks for sharing this video dude
@Supertuner
@Supertuner 4 жыл бұрын
No, thank you for watching! Hope that answered your drivetrain questions from the other video 🤝
@Freerider-free_rider
@Freerider-free_rider 4 жыл бұрын
Insane build, looks so badass!!!
@Supertuner
@Supertuner 4 жыл бұрын
Thanks so much bro!
@JD-pm8mo
@JD-pm8mo 5 жыл бұрын
Sick wrx! Keep up the good job.
@Supertuner
@Supertuner 5 жыл бұрын
Thanks brotha!
@KniFz
@KniFz 4 жыл бұрын
This guy is spot on about how he goes about his build. Wicked smart how he maximizes efficiency instead of just giving it mad boost. only thing he needs is rocket antilag kit loo
@Supertuner
@Supertuner 4 жыл бұрын
Yes it does need anti lag! 🙌🏻
@FitzTrippleZ
@FitzTrippleZ 4 жыл бұрын
seen this thing in person last supertuner meet. Thing is mad sick!
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for coming to the meet bro!
@rileysullivan841
@rileysullivan841 4 жыл бұрын
Damn man I got so much info on this and love the build !
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching! 🙏🏻 stoked you liked it 🤙🏻
@joeystrickler1918
@joeystrickler1918 5 жыл бұрын
Just found your page man, love the content. Idk why you don’t have more subscribers lol.
@Supertuner
@Supertuner 5 жыл бұрын
Thanks bro! 🤘🏻 I thinks We will grow as our content gets better, our uploads more frequent and as people share!
@user-jc1vw6qp3j
@user-jc1vw6qp3j 4 жыл бұрын
Congratulations. You have built a wonderfull machine.
@Supertuner
@Supertuner 4 жыл бұрын
Thank you! Glad you enjoyed 👊🏻
@andreisandu333
@andreisandu333 3 жыл бұрын
great build mate! nice bug! regarding the Rally wheels, those are Compomotive TH2, a bit diffrent wheel and material. chers and good luck with the furthure projects
@alphablondy9507
@alphablondy9507 7 ай бұрын
You earned a New sub ! Love your bugeye
@VOLTAGE886
@VOLTAGE886 5 жыл бұрын
My first car was a bugeye and I’ve always wanted to build one and this is the perfect build
@Supertuner
@Supertuner 5 жыл бұрын
Man I would have done anything to have a wrx as my first car lol
@VOLTAGE886
@VOLTAGE886 5 жыл бұрын
Supertuner it was the cheapest rustiest peice but it ran well. 180k original engine turbo and trans when I sold it. Was pretty but it sure was a blast
@Christosan88
@Christosan88 3 жыл бұрын
I want to build an s7 inspired wrx. This is great to see.
@Supertuner
@Supertuner 3 жыл бұрын
Thanks!
@tylercooper1058
@tylercooper1058 Жыл бұрын
This car is beautiful
@xander7060
@xander7060 4 жыл бұрын
Damn dude thats clean
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching! 🙏🏻
@therunningman8692
@therunningman8692 4 жыл бұрын
Engine set up looks great/clean. I think you should paint the manifold a different color. But it’s your build, so if you like it. That’s cool too 😎
@Supertuner
@Supertuner 4 жыл бұрын
Thanks man! I like painted manifolds too🤙🏻
@aaron5222
@aaron5222 5 жыл бұрын
Seriously cool I hope to see this on the streets sometime soon
@Supertuner
@Supertuner 5 жыл бұрын
Thanks man! Are you local?
@aaron5222
@aaron5222 5 жыл бұрын
@@Supertuner yeah I am in the valley
@Supertuner
@Supertuner 5 жыл бұрын
Come out to our meet this Friday! Check our fb event or if post for details!
@aaron5222
@aaron5222 5 жыл бұрын
@@Supertuner I would if i didn't work nights. But I will keep an eye out for later events.
@Bada3618
@Bada3618 4 жыл бұрын
So many good points that I feel like most people, including myself, would look over.
@Supertuner
@Supertuner 4 жыл бұрын
Thank you! 🙏🏻
@Christosan88
@Christosan88 3 жыл бұрын
Have you added a skid plate for aero and protection? I took my U sub frame out today. I noticed the steering was a lil more drifty. stock struts with lowering springs from previous owner. I want to get tein mono sport but ill prob end up with flex z. I don't want it dropped anymore. I want a cusco subframe brace, for the price of an oem u frame cusco seems the way to go. inspiring build you got there. congratulations. That's really cool u got the G motor closed deck. I been sweeting up a jdm ej207 before I swap it in.
@tjrizvi251
@tjrizvi251 4 жыл бұрын
This is hot bro. Bugeyes for life
@Supertuner
@Supertuner 4 жыл бұрын
Ey thanks dude! They’re the best looking gen❤️
@steveplays1541
@steveplays1541 4 жыл бұрын
If someone made a list I’m interested in seeing it cause I’m currently stock and I wanna see the cost of this👍
@jaredc3689
@jaredc3689 5 жыл бұрын
So good. After you add the cage, you could save weight by losing 10 lbs. I know you can do it Jordan!
@Supertuner
@Supertuner 5 жыл бұрын
Ha ha ha for real 😂😂😂😂😂
@olegandrushchenko1082
@olegandrushchenko1082 3 жыл бұрын
The wrap looks amazing man I’m surprised it was your first
@Supertuner
@Supertuner 3 жыл бұрын
🙏🏻 ty ty. Some parts are starting to not hold up as well but good news is I can always redo sections. 🤙🏻
@CaptainHoldenian
@CaptainHoldenian 4 жыл бұрын
Yo, your engine layout is basically exactly how I wanna do mine (04 wrx). Though, a low mounted turbo would be pretty cool too. I'd also like to do a carbon roof one day. It's too bad you gotta remove the front and rear windshield when you do it. Did you know the Spec C's came with lighter glass? It apparently flexes when they're cleaned. Cool build overall and the wrap is really good for DIY!
@Supertuner
@Supertuner 4 жыл бұрын
Thanks man! 🙏🏻 and no I didn’t know that about the glass, that’s super interesting.
@dirtriderz6881
@dirtriderz6881 4 жыл бұрын
Wow what an absolutely incredible build. My hat is off to you! That’s a sweet car! Is the transmission an STI one or just JDM 6 speed?
@Supertuner
@Supertuner 4 жыл бұрын
Thanks! It’s a jdm sti 6 speed!
@Edward3DFX
@Edward3DFX 3 жыл бұрын
Nice
@saigoneze4465
@saigoneze4465 3 жыл бұрын
amazing build bro love the channel 2016 Wrx owner here .#subiegang
@Supertuner
@Supertuner 3 жыл бұрын
🤘🏻🤘🏻🤘🏻
@turtlejon
@turtlejon Жыл бұрын
What would you do different if you were circuit track racing?
@andyvasquez8724
@andyvasquez8724 4 жыл бұрын
Well made video! I’m wondering what’s the name of the song at 11:20-11:40 ?
@mrnuggs3981
@mrnuggs3981 3 жыл бұрын
Getting a like for the time stamps, four I'll use them tho cuz I want this as my first car
@Supertuner
@Supertuner 3 жыл бұрын
Hell yeah 👊🏻
@olskoolbandito
@olskoolbandito 3 жыл бұрын
Get a reverse hood scoop to allow good flow of air thru intercooler and out air out of the reversed hood scoop...m
@Supertuner
@Supertuner 3 жыл бұрын
Mmmm yeah but they are just ugly 😂
@olskoolbandito
@olskoolbandito 3 жыл бұрын
@@Supertuner i know what u mean...lol
@slowjoe6519
@slowjoe6519 4 жыл бұрын
Good video! What is the song called?
@hiimmarcx1023
@hiimmarcx1023 3 жыл бұрын
Great content!! Why d u stop making videos? :/
@Supertuner
@Supertuner 3 жыл бұрын
What’s up man! There will be more in the future!
@octurbojoe
@octurbojoe 4 жыл бұрын
If you run into issues with the MAF and need to go home, just unplug it. The ECU will run as "speed density" with the MAP sensor, baro sensor, in relation to RPM. Basically limp mode. But it will still run, just not as efficient.
@Supertuner
@Supertuner 4 жыл бұрын
I have no MAF. Tuned on speed density 🤙🏻
@octurbojoe
@octurbojoe 4 жыл бұрын
@@Supertuner Absolutely. Just adding to your comment on the MAF having issues if it fails. Very nice build, btw. Thank you for sharing!
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching man!
@octurbojoe
@octurbojoe 4 жыл бұрын
@@Supertuner You bet. Always a treat!
@billymcrae99
@billymcrae99 4 жыл бұрын
This is the car that inspired me to get the integrale white wheels! What are your tire specs??? I love the build, keep it up!
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching man! 🙏🏻 here are the specs on those kzfaq.info/get/bejne/iJ92nt1o37GvpY0.html
@dashythefoxxo6453
@dashythefoxxo6453 Жыл бұрын
how do you open your gas tank cover thing? the gas fill port cover. idk the offical name for it....
@Supertuner
@Supertuner Жыл бұрын
Same as oem. It clears the widebody.
@anthonychen3875
@anthonychen3875 5 жыл бұрын
Love your car! I feel like there are still something you could do, just thoughts :) 1. Since you already have front mount i/t cooler, I think better to resource a impreza rs hood without hood scoop and put hood vent on there for better aero and cooling 2. Maybe put a cockpit vent on the roof? 3. I wonder if there is any WRC front hood lamp mount replica on sale? It will look so good on your car 4. Since you mention you will get full cage in your car, so I think the everything will be tore apart interior, so I think it is better to get rid of the front/rear strut tower brace and welding the cage tube to there to reinforce them and save weight 5. Fully cover your underneath to reduce aero turbulence and make more down force
@Supertuner
@Supertuner 5 жыл бұрын
Hell yeah! All great ideas and some are in the works :))))
@layesse1
@layesse1 5 жыл бұрын
@@Supertuner wrc bumper from rpg carbon and roof vent would look really good on this.. hopefully by next year my car will look pretty close to this
@jaredc3689
@jaredc3689 5 жыл бұрын
Roof scoop please!!!!
@JokerDMX
@JokerDMX 5 жыл бұрын
RS hood weighs a ton more than the WRX hood
@JokerDMX
@JokerDMX 5 жыл бұрын
RS hood weighs a ton more than the WRX hood
@reefchri
@reefchri 3 жыл бұрын
hey, what intercooler did you use?
@MAAUS
@MAAUS 4 жыл бұрын
I am trying to look for the sparco steering wheel everywhere! Any idea what your model is called?
@Supertuner
@Supertuner 4 жыл бұрын
I’m actually not sure I bought it used almost 10 years ago.
@jordanandmelissasalinas1438
@jordanandmelissasalinas1438 4 жыл бұрын
Yo brotha youv answerd a few questions for me n help me with my sti. But i was really wondering exactly what version jdm sti motor are running
@Supertuner
@Supertuner 4 жыл бұрын
What’s up man! Only the short block halves are from a Japanese sti. So they are closed deck halves with oil squirters. I do not know the version but it should be easy to research and figure out with that info. The rest of the engine is all aftermarket components with usdm 2.0 heads.
@niallrampersad9124
@niallrampersad9124 4 жыл бұрын
Gotta be version 1 or 2,after that they went open then semi closed.
@diverseperformance1776
@diverseperformance1776 4 жыл бұрын
I wanted to do a 6mt swap on my 03 wrx what’s the easiest way to do it ? Or is there any way to build the 5spd strong
@Supertuner
@Supertuner 4 жыл бұрын
You can do both, just depends what you want. The six speed is far superior though. There’s a lot of information out there on this swap. You can do it with or without changing your hubs to 5x114 and that’s the main difference in 6speed swaps.
@draftechbuildings
@draftechbuildings 3 жыл бұрын
Did you say you were able to run a cobb accessport on a jdm ej20? Do you get all features of the accessport such as tuning to stage 1 or 2?
@Supertuner
@Supertuner 3 жыл бұрын
I run an access port. It’s just a matter of running the accesspoer that matches your ecu. It’s on a custom tune.
@scottmaclennan2376
@scottmaclennan2376 4 жыл бұрын
How have you held the rear windows up when the regulator is removed? Is that a kit you’ve purchased?
@Supertuner
@Supertuner 4 жыл бұрын
No kit. You can remove the motor and the arm but leave the track in place. Get the window into position and then put a metal screw through the track under the rollers that are connected to the glass to hold the window in place
@joseratahi4692
@joseratahi4692 Жыл бұрын
Innovative. Good work
@dirtriderz6881
@dirtriderz6881 4 жыл бұрын
Hey man the wrap looks awesome! Where did you get the vinyl?
@Supertuner
@Supertuner 4 жыл бұрын
Mmmm I don’t remember I just ordered a roll online
@383MrZ28
@383MrZ28 4 жыл бұрын
Great work. How much boost are you running for the 340whp
@Supertuner
@Supertuner 4 жыл бұрын
You got me! I can’t remember off the top of my head I’ll look next time I drive the WRX. I believe it is only around 18 psi. Pretty conservative.
@patrickjankowski3476
@patrickjankowski3476 3 жыл бұрын
@@Supertuner fuck you
@jessehickle7370
@jessehickle7370 4 жыл бұрын
I know this is a older video but, if you could help. I’m wondering what you did with the coolant tank that sits on top of the intake. And the over flow
@Supertuner
@Supertuner 4 жыл бұрын
I deleted it and rerouted the lines to clean up the engine bay. However I wouldn’t recommend deleting it because it makes it really hard to get all air bubbles out of the coolant system. Thanks for watching 🤘🏻
@jessehickle7370
@jessehickle7370 4 жыл бұрын
It’s so freaking clean without it, I think it might be worth it.
@alfonsogonzalez5835
@alfonsogonzalez5835 4 жыл бұрын
nice bug eye! I'm building mine right now =D i do have one question.. how long u been growing out that hair my dood?
@Supertuner
@Supertuner 4 жыл бұрын
What up! Thanks for watching 👊🏻 I’ve had long hair since 2004! But recently cut it crazy change...
@davidteo9146
@davidteo9146 5 жыл бұрын
You said that the over fenders are from eBay - would you be able to give any more specific details?
@Supertuner
@Supertuner 5 жыл бұрын
I’ve had this wide body for about 9 years so I don’t have a link. But if you search for wrx wide body you can still find stuff that looks similar.
@davidteo9146
@davidteo9146 5 жыл бұрын
Supertuner I appreciate it!
@SkaterOrnez
@SkaterOrnez 4 жыл бұрын
I've seen alot of people do that front intercooler placement, and for me the tubes don't look good wrapping around the whole engine bay. I like your setup better. You have past videos on how you did it?
@Supertuner
@Supertuner 4 жыл бұрын
Thanks man! 🙏🏻 I built that stuff before starting the channel so I don’t have videos on it :/
@germainewinter6042
@germainewinter6042 5 жыл бұрын
How did you run the oil catch cans?
@Supertuner
@Supertuner 5 жыл бұрын
I recommend spending the money and getting a nice kit from Rallysport direct. My home made setup isn’t great.
@Oldschool503
@Oldschool503 4 жыл бұрын
I'm sorry if i skipped it but, what size tires are you running?
@Supertuner
@Supertuner 4 жыл бұрын
Here’s all the details on the wheel and tire setup! 🤘🏻 kzfaq.info/get/bejne/iJ92nt1o37GvpY0.html
@Christosan88
@Christosan88 3 жыл бұрын
Oh yea Seibon carbon hood and wing. any plans for Seibon parts?
@Supertuner
@Supertuner 3 жыл бұрын
No plans for any
@boostnboba7658
@boostnboba7658 5 жыл бұрын
Damn can’t wait to see this hit the hoonigan burn yard!! Also, what’s your reasoning on keeping a hood scoop?
@Supertuner
@Supertuner 5 жыл бұрын
Duuuuuude I want to hold it down for the awd crowd at the burn yard! Scoop in keeping with the WRC styling and to get more cool air into the bay.
@boostnboba7658
@boostnboba7658 4 жыл бұрын
Jack Cleary no you
@ryanbickel1620
@ryanbickel1620 4 жыл бұрын
Where did you get this style fmic that mounts up high like that? And if it's not too much to ask how exactly does one go about switching to map from maf?
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching! Great questions. I built the intercooler kit so it’s not something you can buy as a kit. To switch to map tuning you need to upgrade your MAP sensor and wire in a IAT sensor and then you need a custom tune to run it.
@ryanbickel1620
@ryanbickel1620 4 жыл бұрын
Awesome thanks for the response man love the build and the channel keep up the good work. One more question though sorry, is the intercooler just like any other fmic youd find you just mounted it up higher?
@Supertuner
@Supertuner 4 жыл бұрын
No problem, The intercooler core it’s self is a universal core that is meant to be used when you fabricate you’re own Kit. So I just built the mounting brackets piping and everything else to make it fit and work. The core is smaller, a full size front mount wouldn’t fit up high.
@caseywaweru2203
@caseywaweru2203 4 жыл бұрын
What size steering wheel are you running?
@Supertuner
@Supertuner 4 жыл бұрын
Oooo good question without measuring I’m not sure. I picked it up off a local classifieds post years ago...
@prorotiko
@prorotiko 4 жыл бұрын
good friend, what body kit did you use?
@Supertuner
@Supertuner 4 жыл бұрын
Hey man! Oem bumpers. Prodrive lip. Htauto front fenders, eBay rear fenders and s7 wrc spoiler from rpg.
@jackson5385
@jackson5385 5 жыл бұрын
What’s the reason you ewg doesn’t “flutter” like a lot of other setups? Does it depend on the type of boost solenoid. If so what are you running?
@Supertuner
@Supertuner 5 жыл бұрын
It depends on how your BCS is hooked up.
@Flex030
@Flex030 3 жыл бұрын
Thanks for sharing your expertise, I have a 06 WRX and you inspired me. If you will indulge me I have a question. I love my stock rims (17x7) but they are a bit inside the fender. You mentioned that you have spacers on I was considering them but I have heard so many negative reviews. What are your thoughts on spacers? Thanks for your advice and time.
@Supertuner
@Supertuner 3 жыл бұрын
I can’t tell you they are safe and be responsible lol... but I think it comes down to using a quality product with proper installation and continued inspection.
@Supertuner
@Supertuner 3 жыл бұрын
There are other things to consider like potential wheel bearing wear over the long term depending on how wide you space.
@Flex030
@Flex030 3 жыл бұрын
@@Supertuner yep, my same thoughts. Thanks for the quick response 👍
@germainewinter6042
@germainewinter6042 3 жыл бұрын
Appreciate this info and build. The turbo housing is .63 or .82?
@Supertuner
@Supertuner 3 жыл бұрын
🙏🏻ty! I can’t remember off the top of my head I’d have to check for you.
@germainewinter6042
@germainewinter6042 3 жыл бұрын
@@Supertuner ok np thanks
@JustMrRodgers
@JustMrRodgers 4 жыл бұрын
Are you located in California? I’d love to catch you at a meet sometime and get a good look at the car and maybe pick your brain a little bit about my 2004 Wrx. Your build is very inspiring.
@Supertuner
@Supertuner 4 жыл бұрын
I’m in Utah 🤙🏻
@JustMrRodgers
@JustMrRodgers 4 жыл бұрын
Dang it! Lol right on for replying and staying active with your subscribers. I appreciate that kind of stuff. Keep on doing what your doing and we’ll be right here supporting you! 🤙🏻
@Supertuner
@Supertuner 4 жыл бұрын
Can’t thank you enough! Appreciate you watching 🤝
@andyreilly7108
@andyreilly7108 4 жыл бұрын
Sick build man all the answers I’ve been searching for! Started to think I’d made a mistake with The ej20g. Are you using mostly usdm ej205 parts?
@Supertuner
@Supertuner 4 жыл бұрын
Thanks for watching! The ej20g block halfs are stout! I am using ej205 head cores. all other parts internally are aftermarket through out the long block.
@andyreilly7108
@andyreilly7108 4 жыл бұрын
Supertuner the 20g has some big fans and some big haters! I just got a version 1 STI and at first I wasn’t seeing a ton of aftermarket support I guess it just takes a little bit of ingenuity! So you’re running just regular 205 heads? No port/polish? Obviously internals then big turbo in terms of what I should do first but which modification did you see the most gain from? I’ve already got the Link g4 ecu so I’m excited to get into this build. My wallet not so much 😂
@Supertuner
@Supertuner 4 жыл бұрын
Rad that you have the link! Standalone sand good tuning will be key! No pnp just built heads. 272 cams, valves, springs etc. For the most part engine internals are not noticeable mods but slow you to safely make more power with bigger turbo and more fuel.
@andyreilly7108
@andyreilly7108 4 жыл бұрын
Supertuner yeah that’s what i figured sounds like it’s all about being patient. Did you get the measurements for your intercooler piping by chance? Sorry about the 20 questions haha
@mjninja1
@mjninja1 Жыл бұрын
Yoooo... I have a buggye wagon. Could i do this?
@envydann3640
@envydann3640 4 жыл бұрын
Where can I get the front sticker super tuner ?
@Supertuner
@Supertuner 4 жыл бұрын
We sell them at supertunerusa.com but they are out of stock at the moment... stay tuned!
@moza1956
@moza1956 4 жыл бұрын
if my goal is 350-400 couldnt i go TMIC with a ej207 in my bugeye ? with a FP green 1050x cobb inj. and a few more mods of course. but i WANT to stay TMIC
@Supertuner
@Supertuner 4 жыл бұрын
I’m sure you could do it with some of the high end tmic that are out now! I ran an aps tmic for a long time
@tjrizvi251
@tjrizvi251 4 жыл бұрын
I think even factory STI TMICs will get you there
@matthewnewsome9221
@matthewnewsome9221 5 жыл бұрын
Morret headlights are very similar
@Supertuner
@Supertuner 5 жыл бұрын
Similar look for sure!
@trailerparkferraris7969
@trailerparkferraris7969 4 жыл бұрын
I cant even get my Subaru to run right im having so much trouble😔 I got a bpt16g turbo pretty much stock everything catless up pipe and down pipe aftermarket headers 3" Exhaust all the way back got an agency power bov no 02 sensors probably making I run like poop can't even get it to boost right or anything I really need some help😅 literally cant go faster than 35😂
@Supertuner
@Supertuner 4 жыл бұрын
Ah dude! There are some keys to live by when building a subaru. Right off the bat, your car will not run and will be damaged/blown with those mods if you don’t get an ecu tune ASAP. You don’t want to drive and hit boost until you have a tune.
@trailerparkferraris7969
@trailerparkferraris7969 4 жыл бұрын
I finally got it to run right, I picked up a turboxs piggyback ecu
@trailerparkferraris7969
@trailerparkferraris7969 4 жыл бұрын
@Jack Cleary no shit glad you know the difference between a hole and a sensor with wires, the upstream 02 sensor is more important than the down stream Im missing the downstream
@CD-dc1oc
@CD-dc1oc 4 жыл бұрын
kinda late but are you still using the stock 5 speed or is it built?
@Supertuner
@Supertuner 4 жыл бұрын
Six speed! Thanks for watching.
@lunakai_360
@lunakai_360 3 жыл бұрын
I'm really partial to the red Subarus. One day I'll have a red wide body gc coupe
@Supertuner
@Supertuner 3 жыл бұрын
Hell yeah dude!
@lunakai_360
@lunakai_360 3 жыл бұрын
@@Supertuner Also can I just say; this car is just immaculate. The thought that went into all the details on this vehicle. Genius is the only word for it.
@Supertuner
@Supertuner 3 жыл бұрын
Thanks my man! Stoked to see your gc build!
@bigeggroll
@bigeggroll 4 жыл бұрын
Awesome build! Do you still have the rex? I get so disappointed, because many Subie builds, unfortunately, end up parted out... Please tell me this thing is still alive and running...
@Supertuner
@Supertuner 4 жыл бұрын
It’s alive man! Just been slacking on making videos 😭 thanks for watching!!!
@bigeggroll
@bigeggroll 4 жыл бұрын
@@Supertuner that's a relief! I thought another one bit the dust... Those 2 liter builds seem to last the longest... Love the channel! U got some AMAZING content, u really deserve more subscribers 👍
@aliasweatherholt2735
@aliasweatherholt2735 3 жыл бұрын
They gave a kit on rising tuning with a front and rear wide body kit showing pics or your exact car? You team up with them? Are they legit or did they steal a pic of your car?
@Supertuner
@Supertuner 3 жыл бұрын
Who?
@Supertuner
@Supertuner 3 жыл бұрын
Ah just looked them up and have never heard of them... honestly pretty wack that they even blacked out my windshield then stole the content to use it to sell products that are not even on my car...
@chrisretro6952
@chrisretro6952 3 жыл бұрын
Who sparco wheel is this I cannot find it
@Supertuner
@Supertuner 3 жыл бұрын
Honestly I bought it used a long time ago and don’t know what model it is...
@chrisretro6952
@chrisretro6952 3 жыл бұрын
Supertuner you still using it?🤣
@frxsty1461
@frxsty1461 3 жыл бұрын
How do u open the gas cap
@dmino
@dmino 3 жыл бұрын
I had that same question. But looking at it now, you can see the way it’s cut out allows it to open properly.
@Supertuner
@Supertuner 3 жыл бұрын
Opens the same, with the factory release and everything.
@fatsubie7604
@fatsubie7604 3 жыл бұрын
No updates on the car?
@Supertuner
@Supertuner 3 жыл бұрын
What up man! Work and school has ya boy busy... BUT, some rad stuff coming in the future :)
@juanarroyo465
@juanarroyo465 4 жыл бұрын
What size tires are you running?
@Supertuner
@Supertuner 4 жыл бұрын
kzfaq.info/get/bejne/iJ92nt1o37GvpY0.html
@Supertuner
@Supertuner 4 жыл бұрын
There you go! Thanks for watching!
@shaggy03wrx
@shaggy03wrx 5 жыл бұрын
That's a lot of orange peel in that wrap. Sick build though. Definitely one that I'll take some inspiration for my bugeye wagon build
@Supertuner
@Supertuner 5 жыл бұрын
Yeah it’s the paint underneath the wrap. I usually try to learn everything once and let’s just say painting is hard lol.
@shaggy03wrx
@shaggy03wrx 5 жыл бұрын
@@Supertuner Totally get it man. The slightest bit of contamination and the paint looks awful. That's why I'm sticking to rattle cans for now. Lol
@Supertuner
@Supertuner 5 жыл бұрын
Lol get it!
@loganaaron7273
@loganaaron7273 4 жыл бұрын
Why does it seem like he has no idea what he’s saying or reading off a script lmaoooo
@jaredguerrero8811
@jaredguerrero8811 4 жыл бұрын
how much did this all cost?
@Supertuner
@Supertuner 4 жыл бұрын
That’s the question no one wants to know the answer too 😬😰.... at least I don’t lol
@angeld4168
@angeld4168 4 жыл бұрын
Supertuner i’d love to know a ballpark estimate. currently daily driving a bugeye, but plan to do a similar build in the near future!
@fredjr.8691
@fredjr.8691 3 жыл бұрын
Did you paint it yourself, what’s up with that orange peel?
@Supertuner
@Supertuner 3 жыл бұрын
Painted them myself when the car was silver. Wrapped it red and orange peel shows through.
@plead.
@plead. 4 жыл бұрын
11:20
@Supertuner
@Supertuner 4 жыл бұрын
🤘🏻🤘🏻🤘🏻
@jauxed
@jauxed 4 жыл бұрын
WRB and gold....only :P
@Supertuner
@Supertuner 4 жыл бұрын
The classic
@ivovk4320
@ivovk4320 3 жыл бұрын
So much orange peel
@Supertuner
@Supertuner 3 жыл бұрын
Oh yeah, endless amounts of orange peel under the wrap. 🤙🏻
@josephbreen9955
@josephbreen9955 4 жыл бұрын
obviously tell you don't live where I live where it's hot ass not and you need AC but you could have done just electric AC motor
@Supertuner
@Supertuner 4 жыл бұрын
Yeah it’s a pretty uncomfortable sacrifice lol
@josephbreen9955
@josephbreen9955 4 жыл бұрын
What about doing that electric motor for your AC without a pulley
@Supertuner
@Supertuner 4 жыл бұрын
The motor is only part of the problem with the current setup. There is no where for the ac core because of where I have the intercooler placed.
@TheTruthposter
@TheTruthposter 3 жыл бұрын
How stoned is this guy?
@cordellej
@cordellej 4 жыл бұрын
i stopped listening when u tried explaining oil squiters and closed deck.
@Supertuner
@Supertuner 4 жыл бұрын
Cool 👍🏻
@boostedboys2342
@boostedboys2342 4 жыл бұрын
You sounds like your explaining to a three year olds
@Supertuner
@Supertuner 4 жыл бұрын
K
Little girl's dream of a giant teddy bear is about to come true #shorts
00:32
Получилось у Миланы?😂
00:13
ХАБИБ
Рет қаралды 4,2 МЛН
Cheap Flooded WRX STI Will It Run!?
20:49
B is for Build
Рет қаралды 987 М.
What You Can do To Keep Your Subaru Reliable.
15:40
Smeedia
Рет қаралды 274 М.
Building a Subaru Wrx in 20 Minutes!
20:36
Joshubaru
Рет қаралды 551 М.
Behind the Build: My 2003 WRX Wagon!
24:09
ThatWhiteBugeye
Рет қаралды 56 М.
Why Do Subarus Blow Up?
9:11
MartiniWorks
Рет қаралды 22 М.
Subaru drifting show cars at Nikko Circuit
14:41
noriyaro
Рет қаралды 359 М.
Tuning a 270+whp Kawasaki H2R
0:13
Jahir motovlog
Рет қаралды 6 МЛН
My New Model 3 Performance Almost Ran Out of Battery 😳😱
0:24
Tesla Flex
Рет қаралды 28 МЛН