SUPERWRAP chrome window trim step by step on C300 (W205) Mercedes

Рет қаралды 34,314

2 жыл бұрын

I decided to peel off my vinyl wrapped window trim on my 2016 Mercedes-Benz w205 C300 and give #superwrap a try and it came out awesome! And it's fully reversible (peelable).
www.GetSuperWrap.com
getsuperwrap.com/product/glos...
10% DISCOUNT CODE: FLEXX10!
DISCLAIMER: This video was sponsored by Superwrap. All views and opinions expressed in this video are of my own. This video description contains a unique discount code which means if you use the discount code and make a purchase, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
Music Credit:
KZfaq Free Music
Dan Henig - "Subway Dreams"
Courtesy of www.epidemicsound.com
Deanz - "Can't Be The Only One"
DISCLAIMER: This video is not endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.

Пікірлер: 76

@sexytopramen 2 жыл бұрын

Looks absolutely awesome.

@jamesdonnelly7768 2 жыл бұрын

Looks great Flexx.

@demeanes 2 жыл бұрын

I was just thinking of this for my CLA. 😎👍

@thomasthomas7858 2 жыл бұрын

Very good idea ! Thanks ! 👍

@OverWatchDSX 2 жыл бұрын

Nice how - to. Going to try this.

@billshack2507 2 жыл бұрын

Hi Flexx, would you recommend using the spray on the chrome bits of the door handles? I also have a W205 and the chrome handles I wanted to get them blacked out

@coreyrenwick6209 2 жыл бұрын

👏 man love this idea, vinyl wrapping worked but it was high effort. I did my calipers with super wrap and love the results

@TheFlexxGarage 2 жыл бұрын

I have some orange cans ready to do my R8 calipers but I decided to go a different route. So I might be doing a giveaway for the orange gloss wheel kit.

@coreyrenwick6209 2 жыл бұрын

@@TheFlexxGarage That is very generous of you! This stuff comes from Canada and takes a few weeks so whom wins will save a ton of time

@joea1746 2 жыл бұрын

Its looks okay if you want to save $$$ instead of getting those chrome trims actually vinyl wrapped or replacing with OEM black trims. In my case I choose getting the OEM black out trims. Nicely done Flexx..👍

@TheFlexxGarage 2 жыл бұрын

This video is about saving money. I did a video on vinyl wrap already but that requires a lot of skill or you are gonna be pay hundreds for a shop to do it. For $50, it’s worth a DIY project over the weekend.

@JimyOfficial Жыл бұрын

Shi it looks good asf

@OverWatchDSX 2 жыл бұрын

Definitely trying this.

@JimyOfficial Жыл бұрын

You tried it?

@57RollsRoycePhantom 2 жыл бұрын

🔥🔥🔥

@Hitthesejoints 2 жыл бұрын

Question for you regarding 2019 facelift, I have a 2016 C300 led package sport package that the front end just got wrecked on. I was thinking of taking the opportunity to upgrade to the 2019 facelift. Do you know if that will work with the new lights and bumper? Do you have any insight or wiring kits for the headlights since mine are the LED 2016‘s versus the new 2019 LEDs?

@dejwitdsgn 2 жыл бұрын

only that fits 2019 front are side and top mounts on the bumper, nothing behind the bumper fits. The lights should have same connector and might work if its cheapest simple led without some dynamic cutting out other cars high beams.

@roncall6065 Жыл бұрын

🔥🔥🔥🔥

@johnharland2336 Жыл бұрын

Great video and I love this Idea but the biggest drawback as with vinyl wrap is that it's temporary. Looks good for a while but any number of cleaning chemicals, wax or clear coat can ruin it. Basically, it's plastic and not all plastics are created equal.

@ryanmiller9293 2 жыл бұрын

Hey flex! does temp have any effect on the outcome? I will be doing this in my NY garage and its getting rather cold out.

@TheFlexxGarage 2 жыл бұрын

Don’t spray below 60 degrees (based on my experience). You can float the cans in some warm water so when you spray, they atomized well but dry times would be much longer between coats. I sprayed the trim in 63 degrees in my garage because I did it at night.

@fullend4512 2 жыл бұрын

Would it not be easier and a better job to just use a 3inch roll of vinyl wrap and cut excess bits? Or is this a better job

@TheFlexxGarage 2 жыл бұрын

No. Not easier. Already answered this in another comment reply. Probably faster (if you have skills) but not easier.

@keithh3099 2 жыл бұрын

Hahah my car trims are already black.. but it does look better . How long does it last? What about when you buff your car will it come off easier? I remember your rims does it still look good. The Gla is a pass tho. Unless is a 45 or 35.🤙

@Sashki81 Жыл бұрын

Brilliant idea! How’s it holding up so far? I will be doing that next on my W212 E

@TheFlexxGarage Жыл бұрын

It was fine until my brother eff it up. He borrowed my car and used a high pressure washer to wash the car and he sprayed up close to the spray wrap to removed bird poo and took off the coating and he also ruined my lower side decals with the pressure washer.

@threenintyyou3412 2 жыл бұрын

Looks sweet, I love the look, closer and closer you’re getting to that complete look👌🏻 I’m wondering how’s it holding up on the trim that has the rubber trim next to it. I tried my hardest to mask the rubber off, but eventually in some spots, it peeled. Idk if i didn’t spray enough or it had a hard time sealing next to the rubber. I also did use plasti dip, not superwrap, that could’ve made a difference too. I also didn’t cut with an exacto knife, I sprayed the coats kinda quickly and peeled it all right after the last coat so it made it easier to peel. Looks a 100x better than ugly Plasti dip matte

@TheFlexxGarage 2 жыл бұрын

So far so good. Even through some rough rain storm. The trick is to definitely put on the layers to make it durable. Superwrap sprays pretty thin hence why it needs a lot of coats. I really took my time on this job. Definitely didn’t wanna do it more than once.

@threenintyyou3412 2 жыл бұрын

@@TheFlexxGarage gonna have to get me a couple of cans of this stuff. Gotta start spreading the word superwrap👌🏻> plasti dip🤮

@danbell3378 Жыл бұрын

Would Superwrap clear coat be OK after the paint? How many coats of clear coat?

@TheFlexxGarage Жыл бұрын

Don’t know. You need to ask them to be on the safe side.

@RealBoombarastic Жыл бұрын

Can the paint be removed easily like plastic dip?

@TheFlexxGarage Жыл бұрын

It’s not paint. It’s liquid wrap/dip. And yes, it’s peelable like plasti-dip (if applied correctly) but it’s gloss.

@recepdeniz3859 2 жыл бұрын

Will the paint not deteriorate when you wash the car with pressurized water?

@TheFlexxGarage 2 жыл бұрын

You don’t pressure wash any liquid wrapped surfaces. Low pressure or hand wash only. Even my R8 that's been spray wrapped with the best materials, I don't pressure wash it. I low pressure wash only.

@jeep1570 Жыл бұрын

What percentage of window tint is on your MB in this video?

@TheFlexxGarage Жыл бұрын

35% cause that’s the max in Massachusetts

@jeep1570 Жыл бұрын

@@TheFlexxGarage Thanks! 35% max in IL too. Looks great 👍

@FiftyPenceR8 2 жыл бұрын

I suggest you do the chrome trim on the door handles next, either with this product or vinyl wrap. I did mine in vinyl.

@TheFlexxGarage 2 жыл бұрын

Nahh. That’s a spot that gets handled (no pun intended) a lot and it will likely wear away or lift rather quickly. Plus my door handles have sensors. I don’t wanna cover them.

@FiftyPenceR8 2 жыл бұрын

@@TheFlexxGarage yeah I did mine which have sensors with vinyl wrap, remove the handle and undo the screws to remove each chrome piece from the handle itself to be fully wrapped on the returns to prevent any lifting.

@TheFlexxGarage 2 жыл бұрын

Yeah, that’s too much work for me. The chrome handles doesn’t bother me since the car is white. I rather spend the little time i have getting new content out to everyone. 😎🤙🏼

@hamdans840 2 жыл бұрын

That's cool flexx...but how long it can last?

@TheFlexxGarage 2 жыл бұрын

Probably 3-5 years depending on how you applied it, and take care of it (like not pressure washing and junk).

@benjo8046 2 жыл бұрын

I just realized your from MA too ? Shoot you have super interested on ambient light video boutta drive my A4 to you and have it done

@TheFlexxGarage 2 жыл бұрын

Hahah. Too bad I don’t touch peoples cars. I only make videos. You are more than welcome to check out “Boston mechanics” in Norwood, Ma. They can do everything I’ve done to my cars.

@benjo8046 2 жыл бұрын

@@TheFlexxGarage oh really ? Norwood is not too far from Me. Thank you for letting me know ! Love the content btw keep it coming

@TheFlexxGarage 2 жыл бұрын

Yeah. Check them out and mention my name. A lot of viewers have gone to them. 😎🤙🏼

@benjo8046 2 жыл бұрын

@@TheFlexxGarage sound good brotha ! Thank you !

@benzyboy1307 Жыл бұрын

They do anything ? I have a c400 id like some upgrades

@AmgKevo 2 жыл бұрын

could you do an update on the wheels you sprayed on your r8?

@TheFlexxGarage 2 жыл бұрын

I had my R8 wheels powder coated months ago. They are fine just like the first day I got them.

@AmgKevo 2 жыл бұрын

@@TheFlexxGarage oh i meant the a4 then haha

@TheFlexxGarage 2 жыл бұрын

Planning to do a video on them next week (if I have time).

@kevinchiu2917 2 жыл бұрын

Yes. Im interested to know how it’s holding up through car washes, wheel brushes, cleanings, etc.

@johnmcgarry3335 2 жыл бұрын

Flexx....when you say "non permanent" can you define time frame? Im thinking more for my rims, as you know my car is wrapped already. Will I have to spray rims every year?

@TheFlexxGarage 2 жыл бұрын

It’s peelable. If applied properly and well taken care of…should last 2-4 years (based on my experience with liquid wrap materials). Apply too thin, edges could lift, water gets in, and bubbling will occur. So definitely take time prepping and spraying the proper amount of coats for durability and longevity. I would say pick up a can and test your skills on a scrap piece before jumping into doing wheels.

@Andre-eo9io 2 жыл бұрын

I like this product, but would most likely do it to my wheels bc repainting do be expensive

@TheFlexxGarage 2 жыл бұрын

Yeah. Did you see my wheel video? Cost like $100 to do.

@Andre-eo9io 2 жыл бұрын

@@TheFlexxGarage OH damn, it was yours I watched! Haha, and I like the idea of this, but yeah wheels for sure.

@snipeguy08 2 жыл бұрын

How did you windows get tinted, did you get it done or did you do it yourself?

@TheFlexxGarage 2 жыл бұрын

That was like my first video on the w205 c300.

@mrmcveigh 2 жыл бұрын

no way is that easy then traditional vinyl wrap!!

@TheFlexxGarage 2 жыл бұрын

Oh yes it is. And I’ve done vinyl wrap many times and spraying is easier than wrapping.

@mrmcveigh 2 жыл бұрын

@@TheFlexxGarage far too much prep work, and 10 coats, I can wrap a window trim on a car in a hour max!

@martinii93 2 жыл бұрын

@@TheFlexxGarage So covering your entire car with plastic and tape, and giving it 10 coats of spray, is easier than giving it a vinyl wrap? Really?

@TheFlexxGarage 2 жыл бұрын

It sure is. It’s a little more time consuming but almost anyone can do it. Not everyone can work with vinyl wrap and is confident to literally take a blade to their car. I’m putting a blade in a gap. Vinyl wrapping the trim is putting a knife on the car (with some protection from masking tape ). That’s 2 different experiences with a knife. Took me years to perfect my amateur vinyl wrapping skills and it still ain’t perfect. But you ask me to spray anything, it’s cake. Just more time consuming with prep but still easier for a DIYer than vinyl wrap. I would take easy application that takes more time...than hard application that takes less time. And I'm speaking from an amateur standpoint.

@Artfulscience1 Жыл бұрын

I agree. I did vinyl chrome delete on my c300 last year and theres a learning curve for sure, less time more skill, this is more time less skill. So much can go wrong with vinyl, even with a pre cut kit. Not getting it on properly, doing it in the sun the vinyl gets too stretchy etc.

@albertcarbajal-rodriguez7105 Жыл бұрын

looked better with the chrome

@Henda1_uk Ай бұрын

Just so you know the chrome trim pops off with a panel removal tool

@TheFlexxGarage Ай бұрын

Yes, i was aware of that. I’ve wrapped my other benz by taking them off. This video is to show people who don’t wanna mess with taking them off and potentially damaging them if they aren’t that handy with taking stuff off and putting it back on.

@Henda1_uk Ай бұрын

@@TheFlexxGarage that's fair enough, love the content. Just purchased the wagon variant and enjoying it so far. Have you looked into larger rear caliper conversions? I have big brake kits on my Scirocco and TT front and back but can't seem to find much for the c class.

@TheFlexxGarage Ай бұрын

I’m jealous of you guys. We don’t have the wagons in the states and I love the way they look, especially when lowered and with a set of nice wheels. As for brake upgrades, I’m not really interested since I don’t race my car around or drive at high speeds. I’m pretty satisfied with the braking power of the oem brakes. More stopping power is always better but the additional cost and labor doesn’t really justify the upgrade for me. Just my opinion.

@Henda1_uk Ай бұрын

@@TheFlexxGarage oh I didn't realise they weren't available in the states. It's really weird as you'd expect that there would be a market for them. I have air on both the Scirocco and TT so I'll eventually get it on the Mercedes, just trying to find the right wheels and brake setup 1st.

@TheFlexxGarage Ай бұрын

Wagons were huge in the 90s and then Got overtaken by SUVs. We’ve always had the e class wagons but that was about it. Now we have the e63 wagon and the Audi RS6 wagon. Both are sick!!! But I wished we had a c wagon so the car and mods are more attainable for the everyday person.