Surface Grinder Arbour (pt1)

Рет қаралды 7,590

Жыл бұрын

In this video I show you how I made a set of arbours for my old and unusual surface grinder. This is part 1 of 2, making the arbour body.
I hope to finish the process in part 2.

Пікірлер: 56

@Rustinox Жыл бұрын

Nice. The lathe could handle these big trepanning cuts very well. And indeed a very useful tip at the end.

@Thesheddweller Жыл бұрын

Thanks Michele, cheers

@MrFactotum Жыл бұрын

eyup Paul Very interesting, and a great job, As for the tip at the end, i was just mumbling to mysel, like i always do!!!, i add coolant whilst doing that, then you stole my thunder at the death!!!! ah well!!🤣🤣😉😉👍👍👍👍👍👍 see you next time ATB Kev

@Thesheddweller Жыл бұрын

Sorry about that…😀. Maybe I’ll forget something on the next video. 🤔 Cheers.

@JamesP_TheShedShop Жыл бұрын

Diddly Squat is both imperial & metric. 😁👍🏻👍🏻

@Thesheddweller Жыл бұрын

Agreed. Diddly squat also applies to my imperial and metric adjustable spanners. 😁🤣

@P.Trim69 6 ай бұрын

Yes Sir, got a db200 and a little proxxon xy table. Genuine proxxon. Nice little piece but anyway thinking about making one with them as have the new h old stock parts with db200, arbor, few grinding stones, everything but little milling table for the lathe. So that's y going use proxxon xy table. Thanks for sharing the video I really appreciate it and enjoyed it.from ur ole hillbilly buddy.stay safe.

@P.Trim69 6 ай бұрын

Yes Sir, like the videos , like the name.

@bentaher1486 Жыл бұрын

greetings from morocco....well done sir

@Thesheddweller Жыл бұрын

Thank you, regards

@RB-yq7qv Жыл бұрын

Hi Shed. The tip very usefully will employ it when cutting a larger profile. I need to also make some arbor for my old grinder that I'm giving new life to. Await next installment

@Thesheddweller Жыл бұрын

Thanks, I’m also waiting to see how it turns out too. Cheers

@Watchyn_Yarwood Жыл бұрын

I enjoy your videos and your presentation style very much! Thank you for sharing your vast knowledge with us as well! I look forward to your next.

@Thesheddweller Жыл бұрын

I’m working on it.🙂

@NellsMechanicalManCave Жыл бұрын

Brilliant video Paul ! Really enjoyed it. The tip at the end will get tried out soon. You know how I like to chatter 😮 Say hi to Mrs. SD for me. All the best Neil....

@Thesheddweller Жыл бұрын

Hello Nell, still a bit cold in your shed? Mrs SD said hi… cheers buddy

@NellsMechanicalManCave Жыл бұрын

@@Thesheddweller I got the hint 😊😊😊

@garygenerous8982 Жыл бұрын

Awesome video Paul. Thanks for sharing and I can’t wait for part 2!

@Thesheddweller Жыл бұрын

Thank you, as for part two i can’t wait either. Cheers

@Watchyn_Yarwood Жыл бұрын

I as well!

@Akitene Жыл бұрын

Interesting tip, indeed. Looks like burnishing at the end. Very good job, as usual.

@Thesheddweller Жыл бұрын

Hi, thanks, yes it looks like burnishing but it is peeling the swarf off, if you get it right, and it does take a bit of practice,.. the finish is wonderful. I used to finish 15mm deep x 12.5 degree dovetails this way under power at 0.4 rpm… I always got that job and the bounus on that job was easy money. Cheers

@hashgeek929 Жыл бұрын

I’m always disappointed to discover that I’ve already subscribed to and hit the bell on your channel. One like is just not sufficient to express my appreciation for each video. The machining content deserves one, the presentation style another, and attitude of making the best of the tools and personality at hand deserve another. Each!

@Thesheddweller Жыл бұрын

Thank you,… but, I am still learning…. Who knows what i might come up with next.. 😁

@Watchyn_Yarwood Жыл бұрын

Very well said!

@Poppop-el3jc Жыл бұрын

Good Job Son Good Job Awesome video Rusty sent me over and i just Subscribed Keep up the good work

@Thesheddweller Жыл бұрын

Hi, thanks,….. Ill do my best. Cheers

@MASI_forging Жыл бұрын

Super work, can't wait to the next video 😁😁

@Thesheddweller Жыл бұрын

thanks,… likewise. Cheers

@someguy1508 Жыл бұрын

Thanks for sharing Paul. Takes me back to when I made an adapter to use my surface grinder wheel flanges on my tool and cutter grinder, and made a few wheel flanges since I couldn’t find any to buy. Trepanning that groove for the weights made me nervous when I did it but it went well for me also.

@Thesheddweller Жыл бұрын

Ah. Kindred spirits in dovetail creation. Regards

@captainraypaul4919 Жыл бұрын

Great video Paul! I'm still searching for a surface grinder, no luck thus far.

@Thesheddweller Жыл бұрын

They are just like busses, you wait for ages for one to turn up then several turn up at once….cheers

@glennwright9747 Жыл бұрын

I am waiting for the followup to see how the balance is achieved!

@Thesheddweller Жыл бұрын

So am I. 😅

@tonyray91 Жыл бұрын

Hi Paul, I like your thinking. I too have an Eagle waiting for restoration, the hubs would make it much more versatile if I can ever get my head around the direction of wheel rotation which is opposite to my other grinder and the venerable J&S 540.

@chrisstephens6673 Жыл бұрын

I have one too but the wheels fit directly to the shaft, I would have to find wheels with a bigger bore to be able to fit a balancerable adapter. Does the lack of oiling points bug you too?

@Thesheddweller Жыл бұрын

I know,… its a bit strange when you’re used to a clockwise rotation. I've used loads of J&S surface and centre grinders. Cheers mate.

@tonyray91 Жыл бұрын

Mine under a tarp outside so I haven’t got into it yet apart from a quick run up. Most wheels are as Paul said 32mm bore and if I recall correctly Paul said the shaft is 25mm so that gives him 3.5mm wall thickness on the arbor. I haven’t noticed the lack of oiling points but I did think on someone’s restoration I saw that the arrangement of oil grooves could be improved, or it might have been a lack of them. I the other are missing I’ll definitely be adding them.

@chrisstephens6673 Жыл бұрын

@@tonyray91 strange coincidence, mine is under a tarp in the front garden too. The shaft on mine is 1 1/4" so the wheels fit without any addition. I would have to find wheels with a larger bore to fit any balancer.

@tonyray91 Жыл бұрын

That is indeed strange. My friend also has one , he, he’s never mentioned a reduced dia.shaft but I do know the wheels are direct mounted.. Paul’s machine is a let model I think as it’s direct drive wh raise mines belt driven. I’d be tempted to make a new shaft with a taper the same as my Harbots SG and with a LH thread so I can run it the ‘right’ way round.

@shaunchurchill4594 Жыл бұрын

I have an earlier Eagle surface grinder and never had a problem with abrasive wheel imbalance apart that is when I have used cheap imported wheels. I bite the bullet and now only use Norton SG wheels. My Eagle has no dovetailed balance weights and yet my Chinese surface grinder does have an arbor with dovetailed balance weights. I remade the weights in brass to give them a tad more mass.

@Thesheddweller Жыл бұрын

Hi, surely the wheels aren’t that bad are they? I would favour the smalest balance weights I could get away with. Cheers

@shaunchurchill4594 Жыл бұрын

@@Thesheddweller they are only tiny weights so the brass made it possible to dial out the imbalance of the horrible imported abrasive wheels. I have heavily modified the Warco surface grinder but you can only polish a turd so much you know 😂 The Warco is less tiring to use though so I alternate work between it and the Eagle.

@Thesheddweller Жыл бұрын

@@shaunchurchill4594 you’re right turds are a real pig to get a shine. I nearly bought a Warco grinder, and as you only get what you pay for, well….. mind you my little lathe has always done its job, after a good polish that is. Regards.

@carlwilson1772 Жыл бұрын

That was as excellent as always Paul, thank you. I don't understand how the dovetail peripheral slot will be used for balancing but I am sure all will be revealed.

@Thesheddweller Жыл бұрын

Hi, you can bet your bottom dollar that I will do my best. Cheers

@carlwilson1772 Жыл бұрын

@@Thesheddweller Yes I can imagine that you will.

@graedonmunro1793 Жыл бұрын

G'day Paul its good to see the vid and look forward to more, did i see a Taylor chuck??? cheers👍👍

@Thesheddweller Жыл бұрын

Hi thanks. Yes you did see a Taylor chuck, i made a video showing how I fixed it,… well… cleaned it up.. cheers.

@bobuilt10 Жыл бұрын

This is excellent timing Paul, I've been putting off making some wheel flanges. I was thinking of using a dovetail cutter on the rotary table for the balancing slot. However having seen your video I prefer the idea of a profile tool in the lathe. One observation, I have a camlock chuck on my Colchester so I can run the lathe backwards after the outer cut and move the toolpost to the far side of the job, I can then cut the inner taper on the same setup. Is there no way of locking your screw on chuck in place to prevent it undoing in reverse?

@Thesheddweller Жыл бұрын

Hi, thanks, there is no known cure for reversing the chuck on the SB at the moment without changing the spindle. mind you I have got an idea that might work, but I have got so much to do at the moment that I haven’t much time to get videos out, but watch this space. Cheers

@chrisstephens6673 Жыл бұрын

Interesting project, look forward to the conclusion. Some folks blame the table drive method for a rippled finish, is your's a rack and pinion? I'm unhappy about the table oiling (lack of) system and bought some ceramic lube to try when the grinder comes out of hibernation in a month or two. I might make up a cable drive for the table to eliminate any cogging from the rack if the oiling doesn't help with finish.

@Thesheddweller Жыл бұрын

Hi, mine is a helical rack and pinion. The cable system is probably the best system in my mind, no backlash. My grinder dosen't have slides or rollers. My table sits on a horesontaly opposed double vee plate and roller bearings on each side with vee grooves in them. It is so smooth, silk dosen’t even begin to describe how easily it moves. And the bearings are sealed, no grease required, with this system hidden underneath it bearly gets dusty. Regards

@hobbyeubauer1162 Жыл бұрын

Hi Paul ! Do you need a Balancing system for this small grinding disks? Years ago , I worked with a 450mm Diameter disk on a 50years old " TOS " round grinding maschine. This one had exaktly the same System only in big 😅 greetings from 🇦🇹 .... Part 2.... Missed 😉

@Thesheddweller Жыл бұрын

Hi, in the past I have worked a 6metre Erfurt with a 750mm x 120mm wheel. I would not like to use that without balancing it. It would be like a bench grinder straight out of the box. Whatever size the wheel, it can be used without balancing but, you run the risk of the wheel becoming unstable and cracking not to mention the finish being poor. one other thing a balanced wheel also cuts much better and lasts much longer. Regards.