Surface Modeling in Fusion 360

No video

Surface Modeling in Fusion 360 | Intermediate Only

Рет қаралды 30,665

Күн бұрын

Download reference image: productdesigno...
IMPORTANT: This lesson is intended for intermediate users. Prerequisites: have a working knowledge of Fusion 360 sketches and solid modeling; some basic surface modeling is ideal.
SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ / productdesignonline
2. Buy Kevin a Coffee ➞ www.buymeacoff...
TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesigno...
2. My checklists for Fusion 360 beginners ➞ bit.ly/f360chec...
SUBSCRIBE (& Hit the Bell!)
bit.ly/sub-righ...
TIMESTAMPS
00:00 - Surface Modeling Knife in Fusion 360
01:00 - Setting up sketch geometry
02:21 - How to surface model Fusion 360
02:40 - Extrude a starting surface
03:20 - How to Surface Loft in Fusion 360
04:30 - Extend a surface when surface modeling
06:03 - How to fix incorrect surfaces
07:27 - Trim away excess surfaces Fusion 360
08:23 - Sharpening the knife edge with Surface Sweep
09:10 - Patch and Stitch the surfaces
10:00 - Final tricks for surface modeling
-
#Fusion360 #ProductDesignOnline #surface

Пікірлер: 20

@ProductDesignOnline 2 жыл бұрын

How'd you feel about this *Intermediate* tutorial? Would you like to see more *Surface Modeling* ?

@ER-zv1nr 2 жыл бұрын

i couldn't keep up but i am beginner level.. hopefully in a few months i will be able to reference this video and understand everything. Thank you for taking the time to share these advance features.

@raisincosplay 2 жыл бұрын

Yes! More please!

@emanggitulah4319 2 жыл бұрын

Yes please... That would be awesome

@harshavardhan4699 2 жыл бұрын

definitely need more of this !!

@printing3d722 2 жыл бұрын

Yes, would like to see more of this kind of modeling. Thanks!

@harshavardhan4699 2 жыл бұрын

Hey Kevin !! I was using creo parametric for a while but a few months back when I switched to fusion 360, I found it was on a whole new level in design environment making it one of the most powerful designing softwares out there. That's when I came across your channel and I want to say that you're doing such a great job helping beginners reach their potential in fusion 360 😄. Thank you...

@ProductDesignOnline 2 жыл бұрын

Thank you, Harsha! I appreciate your support and glad to hear you're enjoying all of the content :)

@ProductDesignOnline 2 жыл бұрын

Download Reference Image here: productdesignonline.com/knife

@tonysmith7702 2 жыл бұрын

Excellent video. Perfect speed. I was able to follow it and understand it as you were going. I was able to guess what commands you were going to use next. Yes on future surface modeling videos.

@ProductDesignOnline 2 жыл бұрын

Thanks, Tony! Hope all is well with you 😃

@Schaub3 2 жыл бұрын

Yes! More surface modelling please. your video's have been my favorite since I got stuck at home in 2020.

@ProductDesignOnline 2 жыл бұрын

Thanks for your support, Tony!

@nigmaxus 2 жыл бұрын

Yes to surface modeling

@emanggitulah4319 2 жыл бұрын

I prefer to use the mirror command at the end of the time line and only draw half of the shape. This will usually make the design more stable. Also I would make a spline just for the lower side of the blade, rather than for the whole lower knife. Thank you for sharing the video

@LS-io5jk 7 ай бұрын

Great video! it should be mentioning the blade tip top should be a straight line, not a spline, otherwise loft won't work. It's omitted from the video. Each line matters.

@nouveauwebsitedesign1890 2 жыл бұрын

Hi Kevin, would you consider doing a video on setting the toolpath for the handle scales? Can not find one anywhere.

@ProductDesignOnline 2 жыл бұрын

Hey, thanks for the video idea! Can't commit to anything at this time, but have added this to my 'CAM tutorial ideas' list. I always appreciate video topics/suggestions, so feel free to share ideas any time :)

@nouveauwebsitedesign1890 2 жыл бұрын

@@ProductDesignOnline Thank you so much for answering, most don't. Looking forward to your next video.

@ProductDesignOnline 2 жыл бұрын

@@nouveauwebsitedesign1890 You're welcome. I try to answer as many as I can :)