SUZUKI SV 1000 CLUTCH PROBLEM SOLVED NO MORE NOISE OR VIBRATION

Рет қаралды 9,137

Жыл бұрын

I PRESENT YOU A VIDEO WHICH SHOWS WHAT CAUSES noise AND VIBRATIONS IN SUZUKI SV 1000
2006. The problem is the worn clutch, or more precisely the clutch basket. In this video, I show how to replace the clutch with a new one that has been regenerated.

Пікірлер: 32

@joelstolarski2244 7 ай бұрын

Very,very nicely done video. Without knowing anything of this bike, i would be mopping up oil from ground, also. Thanks for effort. I'm thinking about getting a 06 sv1000s. It doesn't have title, but so far all the vin checks show it is a clean and not stolen. Also have to get bonded title which I have never done. Girl at local DMV says she gets alot of bonded titles and there isn't a problem doing the registration. I can't understand how so many people nowadays can lose a title to motorcycles and cars so easily. It's crazy to think so many people don't keep important papers like a title for car or motorcycle. Thanks again for video, great job !

@motocraft180 7 ай бұрын

Im happy that video help you a bit, good lack with your SV1000

@mackarof77 Ай бұрын

just missing sound test before/after and it would be more perfect ;) anyway nice tutor thanks !

@DM-yx2tl 3 ай бұрын

Спасибо за видео! Непонятно, Вы оставили старую прокладку крышки двигателя, не будет охлаждающая жидкость поступать в масло? Или дополнительно использовался герметизующий состав?

@richarddennehy7516 4 күн бұрын

Not always. If gasket looks good can reuse. Gaskets of not too old can still be ok. Personally I would replace as it saves doing half the job again. That being said a gasket one year old would most likely seal again if only sealed once before.

@DM-yx2tl 4 күн бұрын

@@richarddennehy7516 Ок.

@adamnaperty 2 ай бұрын

Ostatnio zrobilem sprzeglo u Szramy w Wawie ,ale się zacząłem zastanawiać czy te ostatnia płytkę od sprzęgła włożyłem w ten płytszy rowek czy tak jak resztę .Orientujesz się jakie mogą być objawy gdyby to było źle włożone ?Ja nic dziwnego nie zauważyłem i sprzęgło działa jak trzeba ,ale wolałbym już tego nie rozbierać tym bardziej,ze nowy olej ,płyn chłodniczy i uszeczelki oem.

@motocraft180 2 ай бұрын

Nie wiem dlaczego jest ostatnia tarczka w płytkich rowkach, ale myślę że jeżeli będzie w tych samych co pozostałe nie będzie problemu !

@adamnaperty 2 ай бұрын

@@motocraft180 Dzięki za odpowiedz kolego.Tez mi się tak wydaje.Różnicy nie czuje żadnej wiec nie wiem.Moze i prawidłowo założyłem 😀

@richarddennehy7516 4 күн бұрын

Im from england. Am gonna purchase my second sv1000. Would like to know the place to get my basket fixed like this and a price all in. The sv im buying has the clutch chudder issue.

@motocraft180 2 күн бұрын

That company is located i Poland but they dont do services worldwilde, anyway check that link, www.moto-sprzegla.pl/

@davidbutcher6637 Ай бұрын

Who supplies the clutch kit ? thanks David NZ

@motocraft180 Ай бұрын

That is company located in Poland, Motor Tech

@maskedavenger2578 3 ай бұрын

Nowt wrong with a bit of clutch rattle ,the time to worry is when the crankshaft is rattling ,then you are in the sh💩t . 😎

@DeanML576 Жыл бұрын

Where did you send the clutch basket to be machined?

@motocraft180 Жыл бұрын

Yes , I send it to company who specialising with clutch reconditioning, they doing grate job , company located in Poland .

@mihavuk Жыл бұрын

@@motocraft180hey, would you share the contact of the company? Would they shop international, within EU? Did they also provided new clutch plates? And if it is not too much to ask, how much do they charge? Thank you very much in advance.

@motocraft180 Жыл бұрын

@@mihavuk yes i think they do supply new clutch plates E-mail: kontakt@moto-sprzegla.pl +48 693 231 608

@mihavuk 11 ай бұрын

@@motocraft180Thank you very much. 👍

@paulturner7829 2 ай бұрын

Where did you get the modified clutch from please.

@motocraft180 2 ай бұрын

There is company in Poland they make clutch reconditioning, but they dont send out to other countrys.

@jamie66moto4 10 ай бұрын

Hi, does the company still modify the clutch basket???

@motocraft180 10 ай бұрын

Hi ! Yes they do they do supply new clutch plates as well E-mail: kontakt@moto-sprzegla.pl +48 693 231 608

@jamie66moto4 10 ай бұрын

Have email twice and don't get a reply??

@jamie66moto4 10 ай бұрын

@@motocraft180 just trying to get the price to do a 2015 vstrom clutch basket.

@motocraft180 10 ай бұрын

@@jamie66moto4they do reconditioning and new clutch plates for around 200$ plus shipping

@motocraft180 10 ай бұрын

@@jamie66moto4better call them , they can be busy , Im not sure how they serve overseas customers 0048 693 231 608

@kamilkamil7348 11 ай бұрын

Już w jednym DL 1000 po takim wzmocnieniu kosza/ sprężyn skrzynia biegów się poddała.....

@motocraft180 11 ай бұрын

Jeżeli zregeneruje się sprzęgło za późno ; gdy już wibracje i grzechotanie jest od dłuższego czasu nie można oczekiwać że już uszkodzone elementy skrzyni biegów nie będą miały reperkusji w przyszłości. Wtedy oczywiście zwala się wszystko na zregenerowane sprzęgło , skrzynia biegów może paść w każdej chwili tak jak inne elementy silnika , zależy to od stylu jazdy ;)

@gameadventures1 7 ай бұрын

I don't even have this bike yet lol

@richarddennehy7516 4 күн бұрын

This is the infamous clutch chudder. A guy called sharealike was the original og engineer that fixed hundreds of sv1000 clutch baskets. Such a good bike but the weak link was the basket design. What pisses me off is suzuki ran with this same shit design for over 10 years with other models too. Should have been a recall or at least change the design before putting into new models.