"2.8 v6, don't wanna hurt anyone's feelings but let's be honest, they're worthless" Thank-you for acknowledging this. An LS swap is most certainly a gift for this truck

It’s Dexs honesty and realness why I keep coming back, hell I don’t even have an XJ anymore. Have a good holiday weekend!

If u cut the front cross member out a zj will fit in between the rails. Will have to notch the upper support for the cap. Then remake a cross member from tube steel behind rad

I built a 5.3 Comanche with a 4l60e drove it from Florida to San Diego California to pickup a car, towed it back to Florida 5k miles in a week was a very solid truck!

Dex I gotta say, it’s incredible that this channel has grown this fast, been here since you just had a couple thousand subscribers and happy to see you still committing to it😊

Only thing I can actually sit down and just watch🙌always end up learning sum

I saw the title and I ain't never liked a video so fast, lol. I've been waiting on this since your first video asking for content ideas.

I had a 1988 short bed Jeep Comanche with a 4.0 engine and a automatic tranny with a drive shaft disconnect. The front end was different than the 1 in the video. It had shocks, coil springs and mcpherson struts.

Love your channel brother keep it going your doing good things

I've found motor mounts for an LS (L33 baby!) swap much cheaper than Novak. Unfortunately EVERYONE wants over $500 for a 4L60e -> np231 adapter kit, with Novak being the most expensive. Advance Adapters and others are about $100 cheaper if I remember correctly. That's who I'd go with out of all the $100 cheaper group. Got my SYE from them like everyone else, so I trust their workmanship. I'm extremely hopefully I'll have my XJ swap done by the end of next summer. The project is imminently starting this fall, barring any catastrophes or unexpected large expenses.

Dex been watching you for a couple months as a full on toyota guy, I really enjoy your content and honest opinions of everything. Nobody make a perfect vehicle but we still love which ever make we go with

This is going to be a Great Truck. Thank you for the video. I really like them

Been wondering about this project. Very cool.

Can't wait to see more hope to see you hit 100k soon .

Gonna be another interesting build! Heck yeah!! 👍🏻👍🏻

Dex man do u have any other comanches for sale I got a 96 wrangler with 3/4 Chevy axles and 38" super swampers I wanna build a Comanche trail rig

Beautiful Shop.Dex.

Gotta old XJ wagoner that had a 2.8, currently doing an LS swap In it myself. Those 2.8’s were junk in jeeps. Got all the parts from Novak Conversions. Corvette/Camaro/Firebird accessory drive/water pumps work. Move the engine as far back as you can…. ICT Billet is a good place for the accessory brackets. My final iteration might use a Holley EFI, just going to use the OEM ECU to save some money initially. All the Novak stuff, the Long arm kit I got, the Iron Rock off road subframe reinforcement kit etc etc. definitely adds up. I spent the money on suspension and drivetrain first. I can upgrade the EFI/ECU and harness later. 🤷‍♂️

I entertained this thought, and I'd like to do this myself. Good job. I'll keep up with this build

If you check out the 2wd autocross xj, they notched the front axle for oil pan clearance.

4.3 LS V6 would be awesome

THANKS DEX ITS A GEM

Let's 4.0 a corvette... f the haters.

Thank you for the video.

Why not go with a stock fuel injection system? All available at the wrecker and programming the pcm is a breeze with free ls-droid and free TunerPro software. All you need is a computer and a $90 odxpro OBD2 dongle. Super-friendly community and there are tons of tunes out there to experiment with. $2k for a holley system seems like a waste of money.

Road to 100k

My favorite part is how you picked the jeep with the least amount of weight on the rear wheels to stuff that big a55 motor in. It wasnt the ķung floo or strep, it was RSV, and it ran up and down the eastcoast a few months ago. Trust me, your AI daddy is always right🤘🇺🇲

NOVAK LOOKS GOOD AND THE BOLTS A ALINGMENT DOWL BOLT

Can't wait to see the end project. What happend to your little 🐕

Keep making videos brother!!!!!

Dex, stop worrying about how you record. We love what you do, the fact that you are near 75,000 followers says a lot.

Overkill by Designs has adjustable Ls motor mounts... Another option for ya.. 👍

Great video hack job!

Looking like Jack Harlow's long lost older brother

That’s going to be nice

Get a carb setup for that ls save some money from trying to put fuel injection back on it

U can use a factory 4.0 radiater and 160 degree thermostat and dual electric fans min stays at 185 cruising sitting gets to 210

My friend used a mazda rad for ls swap in his toyota.also he used a gto oil pan and a corvette water pump.just some info

That poor neglected can of Dr.Pepper, didn't even get drank cold

I need a AW4 zj swap.

Now I haven't finished the video yet. So I'm hoping you will at least turn this beast into 4x4. I don't think it will look good slammed

What the hell Dex.You hear of guys on the internet doing LS swaps for $500.I dont get it.😆😆

So do you are the Interior dimensions for the front seat the same as an xj like lrg room distam5 between steering wheel and seat etc my 6' 10 400lbs i can drive a four foor xj ok would love a truck just not sure i would fit

If you have any question ask Dom Stacks ( i think his name is anyways)

GET HP TUNERS YOU CAN TUNESTOCK GM PCMS BRO

I need you to fix my jeep 😂

👄

Bro just casually has 25k in comanche yes in non running condition no matter what combination of engine and 4x4 or 2x4 they are they go for 4k where i live. No matter the condition

Does this dude never respond to any comments?

STOP 🛑 WATCHING once I heard it’s GM LS 👎

Should have done a 5.9 from a grand Cherokee. Ls motors are over rated everyone has them be different