Switch Jailbreak 2024 PLAY ONLINE NO BAN! | Hack CFW EmuNAND Install Custom Firmware

No video

Switch Jailbreak 2024 PLAY ONLINE NO BAN! | Hack CFW EmuNAND Install Custom Firmware

Рет қаралды 152,957

Күн бұрын

In this video I will install Custom Firmware onto my Nintendo Switch and also create EmuNAND which is a virtual firmware seperate from my SysNAND so I can keep my SysNAND clean and play Online without getting banned by Nintendo.
**Don't ask me where to get the game, update, DLC, firmware and keys. I'll delete your comment if I see such a comment**
Hope it helps you all out! Don't forget to LIKE and SUBSCRIBE!
/ @grownupgaminggug
Join our Discord: / discord
Support my Patreon: / grownupgaming
Check if your Switch is patched: ismyswitchpatc...
TegraRcmGUI: github.com/eli...
Atmospere: github.com/Atm...
Hekate: github.com/CTC...
Fat32 Format: ridgecrop.co.uk...
Tinfoil: tinfoil.io/Dow...
90DNS Setter: github.com/suc...
90DNS Tester: github.com/meg...
FTP Server for Switch: github.com/mth...
Save Manager: github.com/J-D...
*********
Sigpatch-Updater: github.com/ITo...
(this tool is no longer available, you can update your sigpatches manually)
**
hekate_ipl.ini code:
[config]
autoboot=0
autoboot_list=0
autohosoff=1
autonogc=1
backlight=100
bootwait=3
updater2p=0
[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/package3
icon=bootloader/res/icon_payload.bmp
[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/package3
icon=bootloader/res/icon_payload.bmp
[Stock]
emummc_force_disable=1
fss0=atmosphere/package3
icon=bootloader/res/icon_switch.bmp
stock=1
[Fusee]
icon=bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee.bin
**
0:00 Intro
0:24 Check if Switch is patched
0:52 Hardware required
1:21 Software required
4:32 Format MicroSD Card Fat32
6:17 Move files to MicroSD Card
9:04 Put Switch in RCM
10:15 Boot into Hekate
11:06 Set AutoRCM
11:43 Setup EmuNAND
17:34 Download Tinfoil
18:13 Download 90DNS Setter & Tester
18:39 Download ftpd
19:10 Download JKSV
20:54 Install NUT Server
24:13 Try out the apps
27:45 Block EmuNAND connecting to Nintendo Servers
30:15 Download and install Sigpatch-Updater
34:54 Download Tinfoil Self Installer instead
37:38 Run Tinfoil Self Installer
37:59 Setup connection with Computer & NUT Server
39:45 Install Game Backup
41:35 Boot into Stock Firmware for Online Play
43:09 Outro
Disclaimer:
This video is intended solely for educational purposes. We do not support or encourage piracy in any form. All content discussed in this video is based on publicly available information and is used for the purpose of providing informative and instructional content to our viewers. We strongly advise viewers to respect copyright laws and obtain legal copies of games through authorized channels. We do not provide download links of any pirated content.

Пікірлер: 1 000

@GrownUpGamingGUG 4 ай бұрын

UPDATE: The sigpatch-updater is no longer available on github, you may search elsewhere forget the tool and manually install sigpatches to your switch.

@iRaven-_- 4 ай бұрын

what are u saying that this video is useless?

@kushalean 4 ай бұрын

so could you not link one that works and helps us or no because basically your saying it will get us banned?!

@slambergamer91 3 ай бұрын

why it removed. will this get our device ban ? still safe ?

@GrownUpGamingGUG 3 ай бұрын

I'm saying you can find it elsewhere or you can do it manually like in this video kzfaq.info/get/bejne/esmEgrtiq7qagpc.html

@TwskiTV 3 ай бұрын

@@slambergamer91 if you can't search a link on your own and you're asking those kind of questions, maybe you shouldn't be jailbreaking a console in the first place

@clizana 6 ай бұрын

This has to be one of the most scuffed tutorials i've seen in a while and yet, works like charm lol. tysm!

@GrownUpGamingGUG 6 ай бұрын

Thanks but what's the meaning of scuffed?

@clizana 6 ай бұрын

there were a few wrong steps, i did them wrong like you and then the right way with you too@@GrownUpGamingGUG

@GrownUpGamingGUG 6 ай бұрын

Oh, lol 😂

@d05music17 6 ай бұрын

Bro I dig it. Even better when things don’t go as you expect (which is for most of us) that’s more helpful than a smooth run. Good stuff will follow and sub. Thanks

@GrownUpGamingGUG 6 ай бұрын

Thanks for the comment and support!

@ginyuTV 6 ай бұрын

works great, couldve definitely cut this down by half time wise but everything works

@GrownUpGamingGUG 6 ай бұрын

Wanted to make an in depth guide for newbies.

@cupelixwan 8 ай бұрын

I have followed other videos you have made in the past and they always were very through and helpful. I am getting an Unpatched V1 Switch (Brand New in the Box Still), and using this video to set it up. Thank you for these guides you make, they are all very well done.

@GrownUpGamingGUG 8 ай бұрын

Great to hear! Thanks for the comment! Appreciate it!

@tobenachosandtacos2892 7 ай бұрын

how did it go?

@DrBeefy 7 ай бұрын

I feel bad that you paid for a v1 at this point. Other versions can be modded now for like 10 bucks. Also there is the mig switch.

@GrownUpGamingGUG 7 ай бұрын

@@DrBeefy depends how much he paid for a v1 unboxed. I think it will definitely go up in value considering how it gets rarer as time goes by. Where did you find someone to mod the switch for 10 bucks? Sounds unlikely. Also mig switch is totally different, it just plays pirated games which is different from cfw. And it's proprietary. I did preorder one for testing and video content but if I was just a user and has a modded switch, definitely wouldn't buy it.

@DrBeefy 7 ай бұрын

@GrownUpGamingGUG the chips themselves cost 10 bucks and are super easy to install.

@JohnTurney 8 ай бұрын

I just got an Oled switch pre-modded :D So awesome!

@GrownUpGamingGUG 8 ай бұрын

That's great, still good to know how Hekate and atmosphere works. :)

@kennethokay 6 ай бұрын

Is it work for oled and battery extended version?

@user-ym1qf4ox5v 5 ай бұрын

@@kennethokaymod Chip

@ivan_at_sea64 25 күн бұрын

Wow. I have just noticed that you have Nintendo Switch videos as well! Very informative. You channel is the best in portable gaming topics!)

@GrownUpGamingGUG 24 күн бұрын

Glad you like them! 😁

@_BootyTang_ 8 ай бұрын

Thanks can't wait to try, the other video I was gonna follow got taken down so I'm happy you decided to put one up!

@GrownUpGamingGUG 8 ай бұрын

Good luck!

@quranrecitation2730 8 ай бұрын

very good bro , i have a moded switch lite it can be work ?

@GrownUpGamingGUG 8 ай бұрын

If it's already modded then yes you can.

@paoworkfromhome 7 ай бұрын

Bro had 1mil subs posting random things

@MinoxJoen 6 ай бұрын

@@paoworkfromhomecrazy ! This world is HUGE lol.

@MinoxJoen 6 ай бұрын

@@paoworkfromhomeif he resells these he’d be rich after taking tips from this tutorial.

@makandalp 8 ай бұрын

What about patched switch? Bought mine very early in 2018.. But patched

@GrownUpGamingGUG 8 ай бұрын

patched switch can only be modded with a mod chip and requires soldering.

@radio_bug 8 ай бұрын

Which I've done and it is a pain in the ass

@GrownUpGamingGUG 8 ай бұрын

Soft modding and hard modding are different levels.

@Mefrom_Here 5 ай бұрын

I just picked up a switch waiting for it to arrive in 1 day will definitely try this out

@GrownUpGamingGUG 5 ай бұрын

Only works on v1 unpatched switches. You bought one second hand?

@bit-zh4gu 6 ай бұрын

90dns setter isn't working for me. Nintendo remains unblocked even after rebooting to apply settings

@GrownUpGamingGUG 6 ай бұрын

try manually setting it on internet settings and setting the dns.

@5543Mj 8 ай бұрын

I love the tutorial! I must ask one question, will I be able to still use the eShop? (to redownload games)

@GrownUpGamingGUG 8 ай бұрын

If you do it correctly, you're SysNand should be clean and safe to go on the eShop. Just do all the modding, cheats, game backups, etc on EmuNand.

@PabloGamer2-rh3rk 6 ай бұрын

To play installed games online you have to use emummc or syscfw

@GrownUpGamingGUG 6 ай бұрын

I do all my online stuff with sysnand.

@sublimatedsnake 5 ай бұрын

Hey mate, my sd card doesn't format, what could be the issue?

@GrownUpGamingGUG 5 ай бұрын

Yes that happens to me with that app sometimes too. I just format it with windows and then go back to the app to format fat32.

@sublimatedsnake 5 ай бұрын

@@GrownUpGamingGUGOK cool, it got fixed! But how do i connect to filezilla, i don't know where to find my host or username

@GrownUpGamingGUG 5 ай бұрын

When you launch the FTP app on switch, all the info you need is on the screen.

@Djsanddy 4 ай бұрын

Thanks a ton brother. Followed the guide step by step and it worked. very detailed and easy to follow. keep the good work up. I found another way to quicken the install I copied the roms to the SD card and then installed from there. It was much faster.

@GrownUpGamingGUG 4 ай бұрын

Glad it helped 😁

@leezyputa9092 7 ай бұрын

i tried but my nintendo switch not boot after inject payload rcm ok

@GrownUpGamingGUG 7 ай бұрын

make sure your files are updated. fusee.bin, your atmosphere files, hekate files.

@icemanff23 7 ай бұрын

Best informative instruction on how to get CFW on your switch thus far. Your video helped me allowed to have it done properly on my switch. Used your one cause you included the NUT explanation which was really helpful for me. Thank you man and appreciate the video you made

@GrownUpGamingGUG 7 ай бұрын

Glad it helped! Thanks for the comment! Appreciate it!

@Honesty69 6 ай бұрын

Good day bro,,I have tried everything/way to get my OLED to boot CFW,,just followed your process to the t,,still nothing 😭,will boot to other options but not CFW,,plz help,,I'm on 17.0.0,,do you think that's the issue? Should I drop to 16.0.? I don't know what else to do🥴. Error is the one that says unknown pkg1 ver. HOS ver. not supported, your emummc mite be corrupted.@@GrownUpGamingGUG

@wtfbearr7905 4 ай бұрын

I have a unpatched switch and was wondering after the step by step is done can I update my console in stock mode or leave it un updated and will I still be able to play online

@GrownUpGamingGUG 4 ай бұрын

You can update the stock firmware for online play.

@fridgeman7 2 ай бұрын

The tinfoil link doesn’t work please if you have another link halp

@GrownUpGamingGUG 2 ай бұрын

Their website has been down for some time now. There's alternative apps like goldleaf or you can try harder to find tinfoil (nothing is really taken off the internet 😉)

@robertdaone 7 ай бұрын

So after doing this I can install game emulators on the switch?

@GrownUpGamingGUG 7 ай бұрын

you could!

@xvnon 7 ай бұрын

Great tutorial followed it perfectly and switch is working well but my wi-fi just randomly stopped working on the cfw just won't connect at all

@GrownUpGamingGUG 7 ай бұрын

Just the connection or WiFi adapter broke?

@xvnon 7 ай бұрын

@@GrownUpGamingGUG it won't connect to the router, reset it but everything else in the house can connect and will connect on ofw just not cfw

@GrownUpGamingGUG 7 ай бұрын

Check the settings maybe?

@xvnon 7 ай бұрын

@@GrownUpGamingGUG yeah I reset them all too and I definitely did 90dns and checked as well so it wouldn't be banned

@GrownUpGamingGUG 7 ай бұрын

maybe you blocked everything including the internet. try undoing the 90dns (make sure you don't go on nintendo servers though) and see if internet is working.

@quentinyeung8628 7 ай бұрын

My system version is 17.0.1 not the same as yours and when I put in the SD card after copied the files from my computer in the switch, it prompt that the SD card is being used by another Switch, I need to delete the data or else can't continue... What shall I do??

@GrownUpGamingGUG 7 ай бұрын

maybe backup the data on your sd card. then format the sd card with your switch and then start then move your atmosphere, hekate, etc files over. make sure to backup your stuff.

@mrpaddenstoel9081 12 күн бұрын

Do you need to have ur PC if you wanna boot in hekate from stock everytime even with autoRCM??

@GrownUpGamingGUG 12 күн бұрын

@@mrpaddenstoel9081 no but you need to have a way to inject payload like using pc, android, iOS, payload injector.

@mrpaddenstoel9081 12 күн бұрын

@@GrownUpGamingGUG 1 how can i do it from ios? 2 with payload injector you mean something like RCM loader? 3 i also really appreciate you always commenting so fast to almost a 1000 comment thank you!

@GrownUpGamingGUG 12 күн бұрын

@@mrpaddenstoel9081 1) there's iOS/android apps to inject payloa 2) yes there's dongles to inject payload available 3) thanks for the comment ☺️

@ManualJod 8 ай бұрын

Good stuff and nice video i was wondering if you could do a video on the new system update and how to update a modded switch to the update

@GrownUpGamingGUG 8 ай бұрын

Ok coming up

@Cyko.. 8 ай бұрын

It's still 2023.

@GrownUpGamingGUG 8 ай бұрын

future proofing this video lol. it's not going to get a lot of views until 2024.

@Mind_BENDERfacts 6 ай бұрын

@@GrownUpGamingGUGyour right

@user-xm5kl4jr8w 6 ай бұрын

@zznet7491 5 ай бұрын

HAHAHA

@curtis445 5 ай бұрын

Found this in 2024 haha

@efrainmachay2483 4 ай бұрын

Thank you so much I was stuck following other tutorial cuz a fusee error and yours fixed my issue

@GrownUpGamingGUG 4 ай бұрын

Glad it helped 😀

@Alina-qp6ce 4 ай бұрын

It’s not working:( we get this error message after we want to start the CFW: unknown pkg1 version. HOS version not supported or emummc corrupt!

@GrownUpGamingGUG 4 ай бұрын

Make sure the atmosphere, Hekate and payload files are updated and correct.

@user-gh2mm1eo7l 6 ай бұрын

Hi, i am super new to this and just bought a oled switch for my son, watching a bunch of videos trying to figure out "how to", just wondering if i have to install a chip like i read in other forums? Thank you your video is awesome and i had to subscribe!

@GrownUpGamingGUG 6 ай бұрын

This only works on v1 unpatched switches. For other switches including the switch oled, you need to install a mod chip. Thanks for the sub!

@user-gh2mm1eo7l 6 ай бұрын

Thank you, you are awesome!

@adonizss Ай бұрын

İs it work with mod chipped switch oled because im thinking to mod chip my switch oled

@GrownUpGamingGUG Ай бұрын

Yes, if you have a mod chip then you don't need to do the first steps to go into RCM.

@adonizss Ай бұрын

@@GrownUpGamingGUG Ok thanks i think i dont use my switch online so i will modchip

@GrownUpGamingGUG Ай бұрын

Yes, it's either mod chip or no cfw for oled switches 😂

@Vanish154 11 сағат бұрын

Ugh! I have a switch that’s patched but it’s firmware version out of the box is 2.3.0!! Oof if 3 was a 2 I could’ve maybe modded it!!

@GrownUpGamingGUG 10 сағат бұрын

If it's patched, doesn't matter the firmware, you still need a mod chip. If it's an unpatched switch, even if you updated to the latest firmware it's still moddable.

@robertkoripsky6407 26 күн бұрын

Hey, I bought a switch that I found out is banned. Do you think if I follow these steps I can get online?

@GrownUpGamingGUG 26 күн бұрын

No, if it's banned already then it's not reversible.

@chriskavvadas304 4 ай бұрын

A quick question, what’s the difference between sysnand and stock launcher (looks to me that they boot the same thing), and what’s the difference between emunand and atmosphere?

@GrownUpGamingGUG 4 ай бұрын

Per my understanding, sysnand is the place where the original firmware is located, you can boot into custom firmware with this location but it's not recommended as it leaves a trace that you've tempered with it and if you go online afterwards you could get banned. Emunand is like a virtual machine separate from sysnand so you can boot into custom firmware here and do all the mods and play backups here safely. atmosphere is the name of the custom firmware. Stock firmware is the original firmware otherwise known as horizon os.

@CommunitySkratch 3 ай бұрын

why was everyone making a partition if the emu works on your sd card

@GrownUpGamingGUG 3 ай бұрын

File based is easier to backup and transfer to another SD card if needed. People were afraid Nintendo can see the contents of the SD card if it were file based and ban you but I've not been banned. Also some say partition is faster than file based, but I don't feel any difference.

@LorddOfChaoss 6 ай бұрын

Everything works fine but I can't boot into anything except Fuse. When I try to return to Stock/OFW I just get an black screen error saying "unknown pkg1 version HOS version not supported"

@GrownUpGamingGUG 6 ай бұрын

did you add the hekate_ipl.ini code in the description? worst case you can always go back to stock firmware by disabling autoRCM and just boot the switch normally.

@KicksNikeFresh 3 ай бұрын

Do you always have to inject payload to play on switch or can you turn it off after your done?

@GrownUpGamingGUG 3 ай бұрын

If you power off the switch you need to inject payload. If you sleep the switch it doesn't. You can inject payload with a phone though as there are payload injector apps for android and iOS.

@crazynjman Ай бұрын

this may be a very noob question but if i replace the sd card currently in my switch now with a new one and follow the steps in the video is the jailbreak stored on the sd card. like if i put my old sd card back in will it just be a stock switch again?

@GrownUpGamingGUG Ай бұрын

The cfw is stored on SD but the jailbreak is done by going into RCM and injecting payload. If you just want to go to stock then you just have to boot normally without going into RCM.

@danialonso4860 2 ай бұрын

After updating "Failed to register placeholder NCA". Please, help!!

@GrownUpGamingGUG 2 ай бұрын

Make sure your Sigpatches, Atmosphere and Hekate are updated.

@gxguide 2 ай бұрын

7:34 before you turn off your "SDCARD"

@GrownUpGamingGUG 2 ай бұрын

Ok you got me

@maxducoudray 5 ай бұрын

When I try to run the NUT server on my PC, it says "could not get title id" from the atmosphere folders. Is there a step I missed? I didn't see him configure anything like this.

@GrownUpGamingGUG 5 ай бұрын

No configuration, just install drivers and run the nut.exe.

@zezozac8495 3 ай бұрын

Hello sir my switch firmware is 13.2.0 can I install atmospare 18.0.0 or must I update the system firmware from 13.2.0 to 18.0.0 then jailbreak it to atmospeare 18.0.0 ?

@GrownUpGamingGUG 3 ай бұрын

You don't have to update firmware to install cfw.

@mayi8468 3 ай бұрын

TYSM, great video! I'm stuck at 25:25 though. When I choose CFW (emuMMC) the Hekate screen loads but then black screen and my switch disconnects from the PC. You know what the issue is?

@GrownUpGamingGUG 3 ай бұрын

Once you boot into Hekate you should disconnect from pc anyway. Have you tried launching with fusee.bin payload? Maybe the Hekate launch with emummc cfw script is incorrect.

@mayi8468 3 ай бұрын

@@GrownUpGamingGUG thx. won't launch with payload too. The switch turns off at the Hekate/Atmosphere screen

@GrownUpGamingGUG 3 ай бұрын

@@mayi8468 try charging the switch. Maybe it's out of battery.

@Thomas-tx6dh 28 күн бұрын

When I start Atmosphere, the screen goes black and stays that way. Even if you use hekate, it will still work. How can I fix it? Atmosphère ver1.7.1 switch ver18.0.0 Can anyone help me?

@GrownUpGamingGUG 28 күн бұрын

You can start atmosphere when launching from Hekate but not from tegrarcm?

@Thomas-tx6dh 28 күн бұрын

@@GrownUpGamingGUG tegrarcm to do, it's impossible.

@GrownUpGamingGUG 28 күн бұрын

I don't understand you

@skidnoob6991 7 ай бұрын

Can I play online again when my switch is already banned? No right? Probably no chance

@GrownUpGamingGUG 7 ай бұрын

If you're banned you can't play online or go to the online store.

@crazynjman Ай бұрын

if i have games and things saved to a sd card already in my switch how do i transfer them to the sd card i will use for this?

@GrownUpGamingGUG Ай бұрын

I wouldn't, it's not really important honestly. Not worth the risk of messing stock firmware data to emunand data. That's just me.

@MakerManX 4 ай бұрын

Everytime I try to run tinfoil installer, a message saying "corrupt data has been detected" appears. Also, I've already manually installed sigpatches

@GrownUpGamingGUG 4 ай бұрын

Most likely your sigpatches aren't correct. Try getting from another source and make sure it matches your current firmware.

@mafakabebe 7 ай бұрын

Thanks for doing this i had some issues tho cuz i was doing it with an rcm loader but i fixed it but i still have a question. if you go in launch you have 4 options right like stock and fusee but what are the other 2 for?

@GrownUpGamingGUG 7 ай бұрын

I think some people may have use for different launch options. For me, I just use stock sysnand for online play, and cfw fusee emunand for other stuff.

@drmountainman2749 8 ай бұрын

ok so now when I switch back to stock firmware, internet appears to still be blocked. Is that sound right? How do I get back onto Nintendo servers to download more of my digital games?

@GrownUpGamingGUG 8 ай бұрын

If you used 90dns setter on emunand it doesn't change the internet settings on sysnand. I think you should check your internet settings on sysnand, make sure DNS is auto instead of manual. Also, make sure you are really on sysnand before attempting to go on Nintendo servers.

@AlexKingSL 3 ай бұрын

I NEED HELP!!!! i came untill ( 25.32 min in the video) cfm launcher , but my device never go ahesd. just black screen. pls advice!!

@GrownUpGamingGUG 3 ай бұрын

So does your computer recognise the switch in RCM?

@user-yj6jx3sh4d 4 ай бұрын

Do we need to plug everytime on PC to start up the switch after it jail break

@GrownUpGamingGUG 3 ай бұрын

If you shutdown, and you want to boot into cfw then you need to inject payload. You can plug into computer or use phone with usb-c cable or you can buy a RCM injector.

@nicholasramey4570 6 ай бұрын

When I’m injecting the file and I’ve made sure it is the correct file. The Nintendo switch doesn’t turn on. It turns on if I press the on button but it doesn’t load up hekate

@GrownUpGamingGUG 6 ай бұрын

Try injecting another payload like fusee.bin.

@oscarcamcho317355 4 ай бұрын

So to switch between system and emuMCC we will always need to have a computer around?

@GrownUpGamingGUG 4 ай бұрын

There are apps on android and iOS that can do the same but you need a usb-c to connect your phone to the switch. Or you can buy RCM loaders.

@oscarcamcho317355 4 ай бұрын

Okay I see thanks

@ganjean4209 8 ай бұрын

Good Stuff my friend!! Thank You

@GrownUpGamingGUG 8 ай бұрын

Glad you enjoyed it! :)

@AlkaiserNeo 7 ай бұрын

Hello! Question! Is there a way to make the Switch boot up by simply holding the power button like normal? I noticed that I have to plug it into my computer every time I want to turn it on.

@GrownUpGamingGUG 7 ай бұрын

no that i know of. you can set it to auto RCM which means the switch boots into recovery mode every time you press the power button but you still need to inject payload when the switch is in this mode. you don't have to plug it into a computer to inject payload, you can use a phone or buy a rcm jig.

@AlkaiserNeo 7 ай бұрын

Ok. Thanks. I'll just use sleep mode then. This is still pretty cool though.@@GrownUpGamingGUG

@TWOBITONEGUY 7 ай бұрын

Mine has been like that for a long time and the good thing is you don’t need a jig I just connected my rc loader and it’s boots the bad side is when the battery has Completely drained it’s takes hours to get a little Percentage of battery once I boot Atmosphere everything goes back to normal

@KY502ShinyHunter 2 ай бұрын

Im hoping to do this in a week or so after my Switch SD slot reader part comes in (broke a while back). I do have a few questions: My system firmware is on the latest version 18.0.1, is it still safe to homebrew on latest version? Should I remove my Nintendo account from the Switch, do a factory reset and create like a temp account? I’m kinda worried about accidentally banning my account by mistake since I have a lot of digital purchases that my kids play on their switches. Don’t want to lose those in a ban. As I mentioned, I have 2 kids that play Switches (a lite and a newer patched Switch), but one of them prefers to use the unpatched Switch that I’m working to homebrew. How childproof is the CFW? Could they accidentally brick the Switch if they push any wrong options or buttons? I’m guessing it would be difficult, I also have a homebrewed 3DS and they play it on it since going in the internals of the CFW require button combinations.

@GrownUpGamingGUG 2 ай бұрын

I think it's a good idea to factory reset it and then do the jailbreak and backup. If you setup the 90dns correctly the switch will not connect to Nintendo servers so it's pretty safe.

@GrownUpGamingGUG 2 ай бұрын

And yes 18.0.1 firmware is fine.

@Duplicated 6 ай бұрын

hi im really sorry if this is a dumb question but we can only play official games ? like cartridge, not games installed by tinfoil right ?

@GrownUpGamingGUG 6 ай бұрын

you can install your backups with tinfoil.

@nickherr9338 6 ай бұрын

Yoyo followed every Step of you and everything seems to work ! But when im on the Stock Partition where i have Mario Kart 8 installed it says Software could not be started. Please help me bro

@GrownUpGamingGUG 6 ай бұрын

i think i replied you on discord. anyway, the game is probably corrupted. you can check if it's corrupted in the game information. else, just delete the game and redownload. see if it works.

@corysmith3895 5 ай бұрын

Should I update my stock firmware after i finish setting this up? Also I got an error on the tinfoil driver where it says "Could not load keys.txt, all crypto operations will fail" with the new nuts 3.3 files. any idea why?

@GrownUpGamingGUG 5 ай бұрын

You need to update stock if you go online. It's up to you if you want to update or not. I'm using nut 3.3 and didn't have that error.

@patrickallen5822 7 ай бұрын

hi got switch playing "borrowed games" lol. Question can i keep it in sleep mode or do i have to always put it into rcm mode before i can use it. Thanks

@GrownUpGamingGUG 7 ай бұрын

You can keep it in sleep mode. But if it restarts, if you have AutoRCM on, then you need to inject payload, or if you don't have AutoRCM on, then you need to use the jig and hold vol+ and power on to put the switch in RCM and then inject payload.

@colinblanchard1314 4 ай бұрын

Hi I am stuck on HEXATE-IPL 25:35 still blank

@GrownUpGamingGUG 4 ай бұрын

Maybe your atmosphere files are bad? Just make sure atmosphere, Hekate, payloads and sigpatches are good and in correct location really, I suggest downloading them again.

@drmountainman2749 8 ай бұрын

I really appreciate all of your help. One more question. I have switched back to stock firmware, downloaded new games to the internal storage from Nintendo server, but when switching back to cfw/emunand it says the internal storage is empty?

@GrownUpGamingGUG 8 ай бұрын

is the sd card full?

@TheThrashingentity 6 ай бұрын

The emunand is like a ghost copy of the stock os system. Even if you installed the games to the sd and not the system, i believe the os still needs a "ticket" showing that the game was installed. There is an option in tinfoil to install the tickets, but i think that only works if it is available in the backup of the games or the emunand was created AFTER you installed the new games. Going online while running emunand can get you banned. My concern is the "no ban" claim. If i remember right, nintendo scans the sd card contents while connected to nintendo servers. Just having these files on sd can result in a ban. I reccommended separate sd cards and using the create partition method instead of the file method in hekate when making the emunand. Switching sd cards is annoying, and you'll need an otg injector, but much less likely to get banned. Look online for otg injectors, but i prefer using an android device (cell phone already on me) and a short usbc-usbc pd cable. There are a few more steps recommended, like dumping the joycon data. I reccommended watching several "demonstration" videos.

@AlexanderScott66 3 ай бұрын

When you create the emunand, it creates a copy of the sysnand at that moment. So your emunand is just reflective of the old sysnand+whatever you did on the emunand.

@patrickneky9638 2 ай бұрын

Great tutorial. I have got to a point in the video that I cannot go any further, I am guessing this is because I made the switch firmware update to 18.01 prior to my jailbreak attempt. I get to 25:25 and select the CFW ( emuMMC) icon but then does not load and kicks me back home page without launching. I launched the fuse payload and I was able to get home page on switch/ from there when i clicked on the album I received an error message and could reboot. if anyone has any tips please let me know. Recommend doing an update video when there is an update to atmosphere.

@GrownUpGamingGUG 2 ай бұрын

make sure atmosphere, hekate, payloads and sigpatches are all updated to the latest. i'd recommend doing the whole process from scratch with the latest update of everything.

@Misho87 4 ай бұрын

How do I remove everything that has to do with the jailbreak? I want my switch to be normal as it was before jailbreaking it. Need help tried haku33 but now I can’t login to my stock os no more, Nintendo logo boots up and then everything is black on the screen. Please help me

@GrownUpGamingGUG 4 ай бұрын

All the files are just on the SD card really. Just disable autoRCM in Hekate and just boot normally and you will boot into stock os. Then you can format the SD card in stock os.

@Misho87 4 ай бұрын

I don’t know if I bricked my switch after Haku33 because when I want to start normally only Nintendo logo shows up and the pitch black screen

@GrownUpGamingGUG 4 ай бұрын

I've never used that tool as I've never felt the need. github.com/StarDustCFW/Haku33 there's a part near the bottom of the page regarding "known bugs black screen after 17.0.0" and there is 3 possible solutions you might want to try.

@NGute87 7 ай бұрын

Finding an unpatched switch has been difficult.

@GrownUpGamingGUG 7 ай бұрын

yes of course, there's not a lot out there.

@drmountainman2749 8 ай бұрын

Can you tell me if I want to pursue downloading my digital games to my pc, I would need to have them already downloaded to the sd card before adding custom firmware, right? So how do I keep them on my sd card if I have to format the card to get this to work? Just fuzzy about the order of things. Or, do the games have to be downloaded to the internal storage first and only internal storage?

@GrownUpGamingGUG 8 ай бұрын

Yes move them to internal storage.

@AdamTheHammer 4 ай бұрын

hey man a little problem, annl the nro files cause my switch to crash everytime i try to run them and the icons whe i look for them in the albums folder is a switch with an exclamation mark on it, what am i doing wrong?

@GrownUpGamingGUG 4 ай бұрын

I just put the nro files in the switch folder and launch it from album. No special techniques. Maybe the nro files you got are corrupted?

@AdamTheHammer 4 ай бұрын

@@GrownUpGamingGUG i thought this so i re downloaded them and put the new nros in the switch folder and still get the same problem. im at my witts end with it

@GrownUpGamingGUG 4 ай бұрын

Maybe your atmosphere files messed up? Try installing everything from scratch.

@AdamTheHammer 4 ай бұрын

@@GrownUpGamingGUG ive done that too. same story. whats throwing me is tinfoil installed no problem from the nro and i and do all the unmentionable things tinfoil can do with no problem, this is a weird one to be sure

@andreaguerrini7777 5 ай бұрын

Can i still play my zelda cartridge in this modded switch or i can’t play a cartridge anymore?

@GrownUpGamingGUG 5 ай бұрын

you can

@what5526 4 ай бұрын

to switch from stock to emunand do i always have to pay load through computer??

@GrownUpGamingGUG 4 ай бұрын

Yes I think so.

@brxvo7055 5 ай бұрын

My fat32 format doesn’t want to work it says “The process cannot access the file because it is being used by another process”

@GrownUpGamingGUG 5 ай бұрын

It happens to me sometimes too. I just format it with windows and then use fat32gui again.

@brxvo7055 5 ай бұрын

@@GrownUpGamingGUG thank you

@vyaire 6 ай бұрын

Hi sir everything was fine until I copying 4IFIR, my album launch gallery instead of homebrew app list. I had to press R + A to get homebrew, what should I do sir please help.

@GrownUpGamingGUG 6 ай бұрын

sorry what?

@kingarron5149 2 ай бұрын

Hi, my Nintendo is done jailbreak and I wan to ask if I wan to make a new SD card with different games is it possible and Which part I need to start? Like when I play I can only need to change the SD card to play others games.

@GrownUpGamingGUG 2 ай бұрын

Copy everything on the SD card to another SD card and it's fine. Best if you don't have any games on it and install them with tinfoil.

@Milan5605 2 ай бұрын

I need only - boot android or linux without any touch to emmc?Question - when i have switch os in latest version - can i use hekate + boot linux?Can i reflash emmc to android or linux + boot or not?

@GrownUpGamingGUG 2 ай бұрын

Why no touch?

@raph21st 8 ай бұрын

You are a GOD amongst men! Thank you!!

@GrownUpGamingGUG 8 ай бұрын

Thanks for the comment! Appreciate it!

@jugokuss10 8 ай бұрын

nice vid, just to know, is there any way to play online on the emmu mode? i have the nintendo server blocked, but in any pirate server, or even on a ryujinx online (not LAN) with my switch? i mean, for expample i have pokemon scarlet installed by nsp on the switch, and i want to play the raids with people even if they are from emulator, could it be?

@GrownUpGamingGUG 8 ай бұрын

I haven't tried that.

@underourrock 3 ай бұрын

So you now have to use a computer to boot your switch every time it is shutdown or rebooted in order to inject hekate. That's a bit of a pain. Thanks for showing the process from the beginning and how it works.

@GrownUpGamingGUG 3 ай бұрын

Actually you can use your phone with a usb-c cable. There's payload injector apps for android and iOS. Or you can buy a RCM injector tool. So it can be done without a computer. I try to keep the switch on sleep rather than shutdown so I don't need to inject frequently.

@underourrock 3 ай бұрын

@@GrownUpGamingGUG thank you for the options! Knew about the basic rcm jig, but didn't know about the injector. If I can have one of those in my case when I travel then I don't have to worry about rebooting thoughtlessly. I don't always have C to C cables with me as some of my older chargers are still type A to C.

@GrownUpGamingGUG 3 ай бұрын

I prefer c-c cable, just put one in the switch carrying case. I had a RCM injector back from sxos era, they require power so you have to charge it from time to time and obviously when you want to boot up the switch it is always out of power.

@underourrock 3 ай бұрын

@@GrownUpGamingGUG good to know. Thanks!

@alexanderjoserosarioindria2811 7 ай бұрын

amigo una pregunta ... mi switch tiene la magia, pero cuando quiero conectar luego de cargarlo porque se descargo completamente, no ha querido encender, con el programa.---- que debo hacer

@GrownUpGamingGUG 7 ай бұрын

You might need to charge it longer. I'm not sure of your situation.

@olivervazquez5691 5 ай бұрын

Its says the sigpatch site is taken down. Do you have any tips?

@GrownUpGamingGUG 5 ай бұрын

yes it's been taken down, you can still probably find it online else you can get them manually too. good luck!

@downloadzy 4 ай бұрын

Hi friend, I have lite version, is it jailbreakable?, if so, where can I plug the jig in? thanks

@GrownUpGamingGUG 4 ай бұрын

Cannot soft mod at the moment.

@popshockjnr5808 5 ай бұрын

thanks. do I need to subscribe to membership with the switch? or can I just play online now without the switch membership? thanks again

@GrownUpGamingGUG 5 ай бұрын

Yes, you need to pay membership to play online for the Nintendo Switch.

@joaomonteirooficcial9036 7 ай бұрын

i know it might be a dumb question, but can i play with the right controller again or do i need to always have the jig

@GrownUpGamingGUG 7 ай бұрын

You only need the jig the first time to get the switch into RCM. Afterwards, you can set AutoRCM in Hekate which puts the switch in RCM automatically every time you boot up the switch. So yes you can use your right joy-con.

@spltnnocto124 4 ай бұрын

If the screen comes on is it still gonna work? (Asking bc I don't have an rcm jig so I'm using a paper clip)

@GrownUpGamingGUG 4 ай бұрын

If you are in RCM, when you power on, nothing should show on your screen.

@spltnnocto124 4 ай бұрын

Ok i have to reposition it then

@sparklingautism 4 ай бұрын

I followed this to the T. Everything worked fine and I eventually didn't play my switch much. Well my switch ran out of battery and when I tried to play again put it in charge etc. Nothing happens. It wont turn on not even with the 20 second hold power let go hold again for 10 seconds method. What do I do?

@GrownUpGamingGUG 4 ай бұрын

keep charging it for longer. when you power on, since you have autoRCM setup, you will boot in RCM. the screen is just black, plug it in the computer with tegraRCMgui and you should reconize it and you can inject payload.

@sparklingautism 4 ай бұрын

i had it charging all night, and tried that to, but i will try some more :) I will let you know@@GrownUpGamingGUG

@sparklingautism 4 ай бұрын

while it does inject payload the screen doesnt light up and nothing happens@@GrownUpGamingGUG

@GrownUpGamingGUG 4 ай бұрын

@@sparklingautism so the computer recognizes the switch and detects it's in RCM? Try injecting a different payload like Hekate.

@sparklingautism 4 ай бұрын

i tried that, and then i got for a single second the screen turned grey a tiny red battery and a yellow lightning bolt appared, this was after it being in the charger for 3 days, and then nothing again, i feel cursed@@GrownUpGamingGUG

@josueburgos9604 23 күн бұрын

Thanks for your help, you are awesone!!! Follow and like !

@GrownUpGamingGUG 23 күн бұрын

@@josueburgos9604 thanks for your support and sub! 👍

@JS-wj6vb Ай бұрын

I’m completely new to modding, so I have a few questions: How can I get new game releases if I can’t access the Nintendo eShop? Can I transfer data from an old switch to the modded switch? If so, should I transfer the data before or after modding the switch? How often would you have to update the software to do this? Is it every time Nintendo updates its firmware? Do you update the software before updating the firmware? Do you to download the software over again like you did in the video for every update or is there an easier way to update the software?

@GrownUpGamingGUG Ай бұрын

You can access the eshop with you stock sysnand. Make sure you don't do any weird things on stock sysnand as you will be banned if it detects any modification. Do you your game backups, saves transferring, modding on emunand. you don't have to update firmware everytime a new version comes out and if you do update, check atmosphere and Hekate supports the new firmware version you are updating to. It's quite simple, just copy over the latest atmosphere, Hekate, sigpatches and firmware files to your SD card and then use daybreak app to update kzfaq.info/get/bejne/la92l7d9tsenoH0.htmlsi=KD9z_Oncg7ugJQzi

@JS-wj6vb Ай бұрын

⁠⁠⁠@@GrownUpGamingGUG I see. Thank you so much. It just that it took me a lot of time to find an unpatched switch and it would have been a waste of time and money if I got myself banned and the switch bricked. I read somewhere that you can “switch” between a normal switch and the modded switch with the emunand and the sysnand. Do you know any guides on how to do that? Also, I am so sorry for the late reply. I just got the notification today. Thank you for taking the time to respond and answer my questions.

@user-jd2mt4kl2j 4 ай бұрын

So I have a oled pre modded switch I just bought and I was trying to set up the emummc on the sd file and I did it and completed the installation but whenever I boot up the emummc nothing pops up and it stays as a black screen, can you help me? Thanks!

@GrownUpGamingGUG 4 ай бұрын

It could be many reasons really. For starters, make sure atmosphere, hekate, payloads and sigpatches are correct and updated. It might be the launch settings in hekate. I'm not really sure without knowing your setup.

@user-jd2mt4kl2j 4 ай бұрын

@@GrownUpGamingGUG you where right! The person I bought the switch form had not updated everything I just got it working, thank you!

@GrownUpGamingGUG 4 ай бұрын

@@user-jd2mt4kl2j glad you got it working so quickly 👍

@vietdragon5610 5 ай бұрын

do it slow down ur nintendo swich?? if you install soo many game in it?

@GrownUpGamingGUG 5 ай бұрын

No it doesn't

@tosinoladele943 6 ай бұрын

hey man followed your guide everything works besides from when I try to backup up my emummc any tips on how to fix it, it says failed to find partition

@GrownUpGamingGUG 6 ай бұрын

i didn't backup my emunand. i just created it on sd card and just backup the emunand folder.

@tosinoladele943 6 ай бұрын

@@GrownUpGamingGUG ah thanks so much bro makes sense

@freemonk3 6 ай бұрын

Thank you for the video. It got my V1 NS patched and going. Tinfoil was a pain (it wouldn’t connect to my drive over my Internet, but USB worked fine). One question though: If I power my Switch down, to power it back up I need to connect to my PC and inject the payload. Is that normal? Why won’t my Switch just power up automatically into Atmosphere or the Stock if it’s powered down?

@GrownUpGamingGUG 6 ай бұрын

If you have AutoRCM, the switch will power on in RCM. At that state, you need to inject a payload for it to boot. You can do this with a phone with usb-c. If you want to power on into stock, turn of AutoRCM. But if you want to boot back into custom firmware, you need to use the jig and slide into the right joy-con and hold vol+ while power on and you still need to inject payload.

@freemonk3 6 ай бұрын

@@GrownUpGamingGUG Ahh that makes a bit more sense. Its just if the kids have it. They tend to drain the battery dry if they are out and about, so I’ll switch to stock with AutoRCM off in those instances. Again, thanks for the help. You not only made the process simple, you were also funny (you forgetting that you changed your WiFi password had me laughing)

@GrownUpGamingGUG 6 ай бұрын

i'm happy to hear your kids will have a blast with this. happy gaming! :)

@marciquaki5080 4 ай бұрын

When launching into into hekate, all my tinfoil games are gone but my micro sd card is still full, so the games are anywhere but where?.

@GrownUpGamingGUG 4 ай бұрын

Hekate isn't the cfw so you won't need to see the games.

@marciquaki5080 4 ай бұрын

@@GrownUpGamingGUG I meant the cfw emu mmc launch option

@GrownUpGamingGUG 4 ай бұрын

@@marciquaki5080 I'm not sure what you did to get to this point. But if I were you I'd probably just format the SD card and reinstall cfw and games again.

@seavers11 3 ай бұрын

Thanks for this very good tutorial, i love your tutorials, they are simple explained, that is what i love. I get my switch with a mod chip, i think it will works the same as with the RCM ? THANK YOU FOR YOUR GREAT VIDEOS

@GrownUpGamingGUG 3 ай бұрын

Thanks for the comment! If you have a mod chip then you don't need to do the first part with the jig to go into RCM.

@CreezyM 6 ай бұрын

I’m having a problem that I hope you can clarify for me. When I do the initial injection payload for hekate when it reads RCM on it almost loads up atmosphere then it blanks out and just restarts into normal nand. I can’t load atmosphere to start the process :/

@GrownUpGamingGUG 6 ай бұрын

I would check the files and locations. Make sure everything is in place

@CreezyM 6 ай бұрын

@@GrownUpGamingGUG there were two issues that I fixed. Atmosphere wasn’t the latest build so I got it off github and it was glitching because it doesn’t fully support FW 17.0.1 so downgraded to OFW 16.1 and now it works.

@CreezyM 6 ай бұрын

@@GrownUpGamingGUG thank you for your video, I studied it last night!

@CreezyM 6 ай бұрын

@@GrownUpGamingGUG oh and I had three files to inject with. Hic@te, payload, and fuzee. Was using the wrong one.

@GrownUpGamingGUG 6 ай бұрын

glad you got it to work! Happy Gaming!

@Originalgremlin 8 ай бұрын

Any idea why my 90dns isnt working? everything else went fine. Ive triedd multiple times and the tester always says the servers are unblocked after using the blocker

@GrownUpGamingGUG 8 ай бұрын

Not sure, but you can set manual DNS in internet settings, you got to look up the IP address to use online though.

@steshancorea4462 7 ай бұрын

Hey so you might have already tried this but you gotta reboot after setting 90dns press y

@what5526 4 ай бұрын

am i allowed to update my system on the stock firmware or should it just stay as unpatched to play online?

@GrownUpGamingGUG 4 ай бұрын

You can update stock firmware to play online, it's actually needed to update most of the time when you go online.

@what5526 4 ай бұрын

@@GrownUpGamingGUG Thank you so much!! will be subscribing fsfs you helped me so much

@GrownUpGamingGUG 4 ай бұрын

Thanks for the sub 😁

@brdane 5 ай бұрын

If im doing this to a switch with save data, I assume the save data will still work once the switch is jailbroken?

@GrownUpGamingGUG 5 ай бұрын

Yes

@brdane 5 ай бұрын

@@GrownUpGamingGUG Thank you, friend!

@GrownUpGamingGUG 5 ай бұрын

@@brdane you're welcome 🤗

@alescapri8055 7 ай бұрын

It doesn't work with me. I do everything until the inject, but my Switch doesen't turn on in Hekate. So this is my log: RCM Device with id C003030C0000002048140D6401101062 initialized successfully! Uploading payload (mezzo size: 92, user size: 109640, total size: 175856, total padded size: 176128)... Smashing the stack! Smashed the stack with a 0x0002 byte SETUP request! Payload successfully injected

@GrownUpGamingGUG 7 ай бұрын

i don't know how to troubleshoot that. if i were you, i would repeat the whole process again. make sure all the files are correct and updated. if you have another sd card, try using another one. that's the best i got. good luck!

@drmountainman2749 8 ай бұрын

do you recommend starting this process offline? my switch is currently stock and firmware 17.0.1, and online with my home wifi.

@GrownUpGamingGUG 8 ай бұрын

sure, when in emunand, connect to internet and run the 90dns setter first before doing anything.

@ripvanced 7 ай бұрын

@@GrownUpGamingGUG is it safe to play games that have the ability to play online using the dns blocker? I mean obviously without going into the online compenent in the games but just playing the game itself

@quangtruong6348 6 ай бұрын

Hey i followed you're guide when i go to systems how come none of the games show up

@GrownUpGamingGUG 6 ай бұрын

What systems?

@your_favTeacher 4 ай бұрын

Are there any other formaters i can use, sadly it wont allow me to use that one?

@GrownUpGamingGUG 4 ай бұрын

I only know this one for free. Sometimes you need to format it with windows first, then use the program to format immediately afterwards.

@Zed.Y. 5 ай бұрын

I cant find the sigpatch files since theyve been taken down, ive looked everywhere else and ive another sigpatch folder, but its not an nro file, apparentky im supposed to extract that onto the root of my sd card but i dont want to mess it up. do you by any chance have like a discord server in which you can send it since you have it downloaded already? id really appreciate if you could, many thanks

@Zed.Y. 5 ай бұрын

Everythings been working great so far and this is the only problem I've ran into so far so please let me know

@GrownUpGamingGUG 5 ай бұрын

if it's been taken down i'm not going to distribute it obviously. i don't want to get in trouble. installing them manually is fine, i did that before they had this program anyway.

@Zed.Y. 5 ай бұрын

@@GrownUpGamingGUG i understand, I'm new to modding switches and I just don't know how or where to put these sigpatch files on the micro SD card, would you be able to help me with that by any chance?

@GrownUpGamingGUG 5 ай бұрын

if the zip file has atmosphere folder, just drag it to the root of the sd card.

@Zed.Y. 5 ай бұрын

@@GrownUpGamingGUG and then I can carry on following your tutorial from there? So after dragging the atmosphere file to the root of the SD card, there isn't any thing else that needs doing right? Thanks btw for replying so quickly I really appreciate it

@Made-By-Mercy 5 ай бұрын

is it safe to update my sysNAND after installing CFW assuming I dont have mods or anything? I'm only doing this to edit my pokemon saves, and need to be online to play with them. Will I be okay, and are there any precautions I should take?

@GrownUpGamingGUG 5 ай бұрын

I think there's a risk if you tamper with sysnand and going online.

@Cyko.. 5 ай бұрын

If your emmuNAND is on 17.0.1 then yes you can boot into stock and update to the latest firmware 17.0.1. I did it the other day and it's great. The problem occurs if your emmuNAND is on 17.0.1 and Nintendo releases a version higher like 17.0.2.