Best tutorial I've seen on how to do this from start to finish. Explains every aspect of how to do it yourself. A big tip of the hat. Thank you.
@LarrySbrusch2 жыл бұрын
Best video I have seen on making a bend in a downspout. Thank you
@kevinkouhbor Жыл бұрын
Your description of making external gutter corner is excellent. Thank you.
@damon45577 жыл бұрын
I've never done this method before but did it on a few pipes I banged in yesterday, the exposed lip may not look as pretty as the way everyone does it these days but I can but its a hell of a lot more durable, and this method doesnt obstruct half of the pipe volume at the bends so les chance of blockage. Nice video!
@chrissheila5 жыл бұрын
Thanks pretty useful for me. Struggled doing my first one today because the bend was only 55 degrees. Made a cardboard template and used that as I couldn't find a protractor. Interesting yours is the only video I've seen with a long side lap as well.
@steventaylor62943 жыл бұрын
Crikey, thank you, that was just sublime to watch!
@Bazzawombat4 жыл бұрын
Pouring rain here is Sydney, after the bushfires, had to fit 2 down pipes, like having you next to me! Turned out perfect! Didn't have a protractor so printed one off the net.Otherwise, I would have been doing a lot of patching with tin scraps & silicone:-)
@sandywar7 жыл бұрын
Fantastic. Thanks for sharing.
@robertsmith-gp6lc4 жыл бұрын
Really good video and a craftsman who has done this a few times !
@stevendimakos92114 жыл бұрын
Very handy tips , thanks for sharing
@luistello19712 жыл бұрын
Excellent!!!
@chrisgrigg2258 Жыл бұрын
Hi James appreciate the video mate. Which is the previous video that offers the measurements please.
@silascastellanos5 жыл бұрын
How do you measure from the gutter to the wall?
@ashpowell94516 жыл бұрын
Great work, clear, easy to follow, should make my life easier as I've got a whole house of these bastards to do..
@mikefalvey16377 жыл бұрын
theres a dimple. .....that might explain why the thing split when i tried to put one inside the other today.....cheers
@dookoos2 ай бұрын
The previous video is the relevant one
@mobilguy1004 жыл бұрын
What was the first video. Im missing the measurements
@donburke48862 жыл бұрын
Nice work mate,But how hard would it have been to just say the measurements.. Instead of saying use the measurements from the previous video.What if people haven't seen the previous video ?
@5977dx3 жыл бұрын
great!
@nihalnelson89013 жыл бұрын
👍👍👍💐
@pualo92637 жыл бұрын
measurements from previous video?? why couldntbyou just of said it here?
@ep19117 жыл бұрын
From most suppliers, downpipes 100 X 75 are: Measure from gutter to first bend Mark it all the way around go down 130 mark it all the way around between the two marks is your measurement make sure the flaps are on the upper section always or it can leak. measure to the wall. repeat keeping in mind that the cut will be at the front of the gutter this time, not where the seam is.
@Ash19594 жыл бұрын
kzfaq.info/get/bejne/gZdkfsh6mLzGYmQ.html
@robsmith608711 ай бұрын
this is a 50 X 100 ?
@TheNanaweaver3 жыл бұрын
Any measurements I am old lady need help
@zitrojava2 жыл бұрын
👍👍👍👍👍
@dustincurtis81536 жыл бұрын
Shit work...... think directional flow of water...... put all your tabs on the top bend