At least they updated the graphics quality from over a decade ago !
@WaterjetChannel3 жыл бұрын
When do we get to test one?
@samwise_K3 жыл бұрын
I await the day.
@atjkb3 жыл бұрын
BRUHH
@Mwwwwwwwwe3 жыл бұрын
Hooray for youtube crossovers!
@biggles96043 жыл бұрын
you guys should try cut a real piece of graphine.
@eeeeeek3 жыл бұрын
even the title said "when"
@kcr62823 жыл бұрын
Looks awesome, do you have any real footage of it actually working, rather than just CGI?
@l0_0l453 жыл бұрын
Many companies make the same product. It works obviously.
@wood42shed3 жыл бұрын
Try kzfaq.info/get/bejne/gpekjbp1sLO9lH0.html
@shirothehero06093 жыл бұрын
@@l0_0l45 thanks for not at all answering the question or lending anything to the thread. Thanks for the useless comment, obviously. Also, check this vid. It's awesome cutting footage: kzfaq.info/get/bejne/gpekjbp1sLO9lH0.html
@l0_0l453 жыл бұрын
@@shirothehero0609 I already mentioned that other companies make it too, which means that this is a real component rather than just concept art videos. That answers his question. Remaining he can check for himself. However I can't tell why you're so salty. Here, seems more appropriate to quote yourself back to you, hear you own words, suits you better:
@l0_0l453 жыл бұрын
@@shirothehero0609 thanks for not at all answering the question or lending anything to this thread. Thanks for the useless comment, obviously.
@Lone-Wolf873 жыл бұрын
Show a piece of material that was cut with your laser. You can make anything look amazing with computers but show the real thing not computer animation.
@gabsrants3 жыл бұрын
not the same machine, but the same technology, as far as I understand: kzfaq.info/get/bejne/gpekjbp1sLO9lH0.html
@Roofluffer3 жыл бұрын
all the PR in the world like this is NOTHING. show us actual work and the machine PREFORMING the tasks to make the piece in the demo
@EvonixTheGreatest3 жыл бұрын
@@gabsrants Nice, if it works as well as that then it could live up to this hype
@gabsrants3 жыл бұрын
@@EvonixTheGreatest by what I read in the comments below that vid, it took quite some finageling to get it to work on all the different materials.
@jeremy.stlouis3 жыл бұрын
There are some real cutting video on the channel. I don't think it's exactly the same technology than the other company, but it is similar.
@chestervaldes75513 жыл бұрын
They should have had animated sharks with these mounted on their heads.
@andrewjvaughan3 жыл бұрын
so you made a fiber optic cable for the laser with laminar flow water - neat
@-.._.-_...-_.._-..__..._.-.-.-3 жыл бұрын
Which seems to render the laser useless, other than lighting up the water. The video only mentions the water doing the cutting.
@andrewjvaughan3 жыл бұрын
@@-.._.-_...-_.._-..__..._.-.-.- no? they clearly said they use the water to guide the starting point of the laser closer to the material so it doesn’t expand and cause broad cuts
@OskarNendes3 жыл бұрын
@@andrewjvaughan I think the water may be doing the hard work here. Maybe the heat generated by this laser rises the water pressure even more?
@andrewjvaughan3 жыл бұрын
y’all, this is a laser cutter, not a water jet. it’s literally part of their Laser Machining Cutter line. checking out of this thread.
@fatboyRAY243 жыл бұрын
@@andrewjvaughan 😂😂😂
@MikeWrenches3 жыл бұрын
I came hoping for laser sharks, but that handshake CGI is the treasure I didn't know I needed
@ranasaab65603 жыл бұрын
By cylindrical cutting point we can cut the table as well along with the work piece.
@norbertfleck8123 жыл бұрын
Any footage of real(!) Workpieces?
@Mimiyu0043 жыл бұрын
KZfaq really know what I need Better way to cut cheese burger.
@mr.cheese24993 жыл бұрын
“That sounds impossible” but they did exactly what i thought they would
@PrinjPal3 жыл бұрын
me: does it cut by heat or force? Synova: yes
@LeftOverMacNCheese3 жыл бұрын
Mostly heat, the water jet is only for guiding the laser
@christophervankrevel13313 жыл бұрын
Cool water laser, love your work on that, but whats with the CGI people in the ad, who's responsible for that decision?
@Shadow__X3 жыл бұрын
even youtube kids' animations look better than that xD
@seppukun2083 жыл бұрын
Bahahaha
@mikeslaserstuff40183 жыл бұрын
Oh... you haven't been on earth for the last 2 years? We had a pandemic, things got crazy.
@seppukun2083 жыл бұрын
@@mikeslaserstuff4018 this video was made prior to the fake pandemic that has a survival rate of 99.9% for people under 60
@JohnnyMotel993 жыл бұрын
@@seppukun208 🤣🤣🤣
@a-10warthog723 жыл бұрын
I came by the recommendations, and stayed by the comments.
@bertbrecht75403 жыл бұрын
Well made ad. I want one as soon as they break $300.
@xenuno3 жыл бұрын
Me too!
@Bread_User3 жыл бұрын
This isn’t an ad, its an animation project
@SirAlbertoo3 жыл бұрын
This is some cutting edge technology
@SirAlbertoo3 жыл бұрын
Get it
@moonsk1ter893 жыл бұрын
I see what u did there
@FahrurRoziqin Жыл бұрын
cutting edge technology by replacing abbrasive material with laser and scaled down the water jet down to human hair thickness, awesome invention indeed
@synova8354 Жыл бұрын
Thanks :-)
@Tanmayeshwar3 жыл бұрын
Finally, I found something to cut my nails, And Most Important with precision...😀
@Palenque_pupikaka3 жыл бұрын
that handshake 🤝 🤣🤣🤣🤣 lol
@wisniamw3 жыл бұрын
Using water as an optical fiber for laser to delivery it right to the point you want it, jeez it so simple and yet soo awesome why i didnt come up with this
@kristyanne7193 жыл бұрын
@@marko6550 You do know lasers aren't fire, right?
@GrandeCalle3 жыл бұрын
cause it isn't simple at all....
@wisniamw3 жыл бұрын
@@GrandeCalle this technology is pretty simple. We have lasers for 70 years, and laminar effect are known for even longer time. Thats why this is soo awesome, it combine two simple technologies to create something much better, synergy went out through the ceiling :D
@StephenRansom473 жыл бұрын
This is Incredible. As a Tile Setter, I can tell you that the current Rectified Tile is real unstable. The stress and micro fractures, are making cutting impossible. Even wet saws aren’t as effective as they were. Simple tile cutters will crack the material during a cut. Non-porcelain ceramics never do such things. The rectifying of tile has made it very hard to do good work. It’s pretty miserable. Please help.
@dominicjose36603 жыл бұрын
This wasn't uploaded on the 1st of April?
@jackfrost29783 жыл бұрын
Amazing work. How do you keep the water from splashing around and distorting the laser? How do you make the water just disappear?
@cantseewhatcantbeseen44853 жыл бұрын
I smell all kinds of bs here, if anything the water would boil off into steam the second this laser starts cutting assuming it doesn't completely drown out the heat that's needed for the laser to cut anything. Just my uneducated theory though.
@chrissimmons57623 жыл бұрын
I run these machines. The water splashing is held out by a diaphragm
@alexp49032 жыл бұрын
They use helium to keep the jet stable. The helium travels in the water jet keeping it from splashing and disrupting the laser. We 27 of these at my shop.
@jackfrost29782 жыл бұрын
@@alexp4903 Thank you for the update!
@Tedlasman3 жыл бұрын
They left out plastics. Can it cut plastic? Or wood?
@jackmclane18263 жыл бұрын
What's the cutting speed on 2mm, 5mm, 10mm and 20mm steel?
@Vision_Voyagers3 жыл бұрын
So when do you realise it's an advertisement 😂😂.
@user-cr4sc1ht9t3 жыл бұрын
Ah, laser beams making total internal reflection inside the waterjet pillar... interesting
@nikhilgupta57333 жыл бұрын
This is brilliant, using TIR in jet stream.
@youngeshmoney3 жыл бұрын
And for just $700,000 YOU can have a synova laser cutter. If you call within the next 30 seconds, we'll double that offer, that's right, TWOOO synova laser systems for the price of one, shipping and handling not included, CALL TODAY
@stephenspgates687310 ай бұрын
yes they still cost about that much,
@hitesh439232 жыл бұрын
Awesome Interesting! Nice combination of two technologies. Excellent
@goldenlegend72003 жыл бұрын
This is gonna be in the next monsterverse movie
@helmutzollner54963 жыл бұрын
Interesting! Nice combination of two technologies. Excellent!
@justinbelshe3 жыл бұрын
Was it thermal damage that caused all the vocal fry we're hearing?
@StuartCullen3 жыл бұрын
Can we see it then?
@kj226973 жыл бұрын
Damn so I'm just willingly watching advertisements now?
@siggyincr74473 жыл бұрын
Didn't really explain much. Lasers cut materials by vaporizing them through heating a very small spot intensely. Water would cool the spot the laser hits. So how does this work? Does the laser create a small pocket of super heated water vapor around where the laser hits the material to be cut? The video raises more questions than it answers.
@akinaakina99264 жыл бұрын
Price?
@albertoribeiro89073 жыл бұрын
That is exactly what I was looking for.
@ayganotomasyon11093 жыл бұрын
light is transmited via water column. Like liquid fiber
@enginertufekci1665 Жыл бұрын
Can I get information how many nm is the perfect cut laser? awesome
Reminds me of that plastic surgery laser in the old movie Logan's Run ! 💡
@kshitijghormade5843 жыл бұрын
How does the laser heat the material without evaporating the water
@Kilohercas3 жыл бұрын
Femtosecond laser is also very gentile to metal around it. If it touches , no more metal , just gas
@Mwwwwwwwwe3 жыл бұрын
How does the laser cut if the water heatsinks the workpiece...also how does the lens not get abraded bu the water/grit!!!!
@Nbomber3 жыл бұрын
What I find fascinating, is, how can the laser beam be hot enough to cut, yet not immediately turn the water to steam?
@Taunus-Tim3 жыл бұрын
Light has to be absorbed to induce heat into material. Water doesn't absorb the light, so it won't get hot. You can't cook water with light. Or at least not with every wavelength. Microwaves are also light, but surely capable of heating water. The wavelength of the laser light instead can't heat up the water, cause it won't interact. Normal sunlight doesn't heat water, but the particles or the surfaces inside/below the water, which than heats the water up. Some wavelenghts of the sunlight get absorbed by water though, but that's a minority
@Nbomber3 жыл бұрын
@@Taunus-Tim ahh, yeah of course. Thanks for explaining that dude, its so obvious now that you mention it.
@thecrazy88883 жыл бұрын
How is this better than waterjet only?
@alexlo77083 жыл бұрын
Water is cool. Laser cut materials by burning it out. It is so contrast.
@namdot15883 жыл бұрын
How does it cut if it's kept cool....
@synova8354 Жыл бұрын
The Laser MicroJet (LMJ) is a hybrid method of machining, which combines a laser with a "hair-thin" water jet that precisely guides the laser beam by means of total internal reflection in a manner similar to conventional optical fibers. The water jet continually cools the cutting zone and efficiently removes debris.
@ruizaladdin19673 жыл бұрын
Now this is unique technology 👌
@scarlet00173 жыл бұрын
how about a rock or high carbon material
@topaz-rn3 жыл бұрын
Any footage of it giving birth?
@Wheresmy2403 жыл бұрын
Cool. Does it actually exist?
@Jeralddoerr3 жыл бұрын
Do you still use an abrasive for the water?
@riturajrath62883 жыл бұрын
more than these animation, i believe in real footage, cutting quality abd perfection so please dont give us animated videos
@radiosonde.online81643 жыл бұрын
Anyone can do Photoshop. As a technician, I want to see chips and lasers live xD
@henrychan7203 жыл бұрын
Wire EDM machine manufacturers: visible sweating
@mrnickhox3 жыл бұрын
Great!!! No need for scissors anymore!
@majdq83 жыл бұрын
What is the cost of such a machine? Is it competitive with EDM?
@JaakkoF3 жыл бұрын
It can't compete with wire EDM regarding cutting accuracy, as it has cutting forces.
@dekutree643 жыл бұрын
@@JaakkoF Not really. The water will exert a small amount of force, but it only needs enough pressure to keep the stream straight, unlike a waterjet cutter where the water/grit velocity is fundamental to the cutting action. According to the web site, it has a pressure range of 50-800 bar, whereas waterjet cutting uses 2000-6000 bar. And the water should cool the surface similarly quickly to EDM to minimize HAZ, while being much cheaper without the consumable wire and all its fiddlyness. Especially for things with a lot of holes where you have to drill a pilot and thread the wire through for each one. Wire EDM can cut much thicker material, though.
@MrMeloman193 жыл бұрын
The mad fantastic books, coming true day by day
@zouhirbou859810 ай бұрын
CAN YOU TELL ME THE PRICE PLEASE
@luissan5153 жыл бұрын
Where's the download link?
@odthegreatest3 жыл бұрын
Wow it's like fiber-optic cutting.
@Nuschel3 жыл бұрын
This might be a stupid question: isnt cooling the workpiece contraproductive?(does this work exist ? xD) dont lasers cut by melting the metal?
@LeftOverMacNCheese3 жыл бұрын
This is a pulse laser, it cut material by evaporizing so it doesn't make any molten material, and because it's a pulse laser it happened so fast it only heat the material that hit the laser the surrounding will stay cold. The water jet simply used just to guide the laser without causing diffraction just like fiber optic cable
@xxxakkkgaming76473 жыл бұрын
NOW I KNOW HOW ALIEN CUT DOES ROCK
@clevc1123 жыл бұрын
Wait until they discover that this can be used in an engine to make them unbelievably efficient. But that was later in the future.
@pepsiatlas54523 жыл бұрын
Why didn't the laser just vapourise the water?
@vijayakumarraja48202 жыл бұрын
Laser Cutting light price
@aspirecncworks568611 ай бұрын
How much is the cost
@astral67493 жыл бұрын
What if there's impurity in the water?
@KishanKumar-ul1ef3 жыл бұрын
What has happened to my youtube recommendations!
@colinashby37753 жыл бұрын
Not sure if I must listen to the loud music or the talking
@setoman13 жыл бұрын
Our machine is so perfect, we have to use CGI. Yeah, I'm pretty sure a water jet does exactly the same thing.
@alexp49032 жыл бұрын
My shop has 27 of these. A water jet cannot do the same thing. The machine is badass honestly. They should post better videos. Especially when the are cutting diamonds.
@ricardop24583 жыл бұрын
That two people animation at the end, very bad.
@maximr48103 жыл бұрын
what is the life span on consumables?
@piyusharora86333 жыл бұрын
But isn't the water going to spread as soon as it leaves the nozzle water jets usually do have this problem they cant stay in a beam for long so the best efficiency don't go as far as 10 cm stay at 1
@LeftOverMacNCheese3 жыл бұрын
The water jet is not moving as fast as you think it is. The water jet is used only to guide the laser the main cutting job is done by the laser not the water jet
@brettmoore31943 жыл бұрын
New sin is a unique name
@jlagersss3 жыл бұрын
Fun fact: The handshake is CGI because during this time, the virus is already present.
@Red_Eyed3 жыл бұрын
Sweet, does it come in red?
@fairnut64183 жыл бұрын
>Water jet >with light i lost it
@LeftOverMacNCheese3 жыл бұрын
But it's real tho
@YawnGod3 жыл бұрын
But E = mc^2, so why do I need the laser?
@princeofxane3 жыл бұрын
Apple: write that down!.
@amritpatel37943 жыл бұрын
Ingenious Invention.
@aurora23193 жыл бұрын
But does it do that can't be already done with water jet cutting???
@chrishayes57553 жыл бұрын
it removes less material when it cuts I believe, also no abrasive, no huge amounts of water to deal with. the water in this system isn't pressurized to make cuts, it's simply guiding the laser.
@xzlrp473 жыл бұрын
please come to kenya,
@NanoXSolar3 жыл бұрын
Let me view the PV Wafer results with my electron microscope.
@USBEN.3 жыл бұрын
I can make a car from solid metal with computers. What's your point?
@cobralyoner3 жыл бұрын
WET Laser technology 🤤🤤🤤
@cobralyoner3 жыл бұрын
2:25 best part
@sarveshmestry75013 жыл бұрын
I want to know which metal can this cut (if possible max hardness of metal upto which can it cut) and maximum thickness
@synova83543 жыл бұрын
Any metal or metallic alloy, whatever the hardness, can be cut. The maximum thickness however depends on several factors, and must be analyzed on a case by case basis. If you are interested in a demo or feasibility test please contact us: www.synova.ch/services/application-development.html
@sarveshmestry75013 жыл бұрын
@@synova8354 Thanks
@IppiopaidFEEDBACK3 жыл бұрын
That’s so crazy.
@jerometruitt27313 жыл бұрын
How much
@valeforedark3 жыл бұрын
It removed more material than the red one. Js
@antokhodantok81693 жыл бұрын
Regane piro ?..How much does it cost ?...
@charbxcreation3 жыл бұрын
Like, why not just post a demo of the real thing instead of a 3D render of the claim? I don't get it.
@HelamanGile3 жыл бұрын
Have to prevent rust can you guys put this in a vacuum chamber
@voyagershahab3 жыл бұрын
Nice idea but not possible
@-.._.-_...-_.._-..__..._.-.-.-3 жыл бұрын
So, it's a waterjet cutter. There is no mention of the benefit of the laser. According to the video, it's just there.
@LeftOverMacNCheese3 жыл бұрын
The main cutting job is done by the laser, the waterjet is only used to guide the laser so it doesn't required any lens at all just like an optic fiber cable
@jeffreyrimback29253 жыл бұрын
I wouldn't say it makes the other Lazer system obsolete. What if I don't want my stuff wet
@aiexzs3 жыл бұрын
it's for cutting materials, not something sensitive like pcbs