SYSTEM INSTALLATION - Install Guide | SeaWater Pro Watermakers

No video

SYSTEM INSTALLATION - Install Guide | SeaWater Pro Watermakers

Рет қаралды 4,802

Күн бұрын

A step-by-step guide to installing the SeaWater Pro watermaker system on your boat...
Check out our Boost Bump Assembly video here: • SeaWater Pro Watermake...
Download the User Manual here: cdn.shopify.co...
Chapters:
Fastening the membrane 0:35
Mounting the prefilter 0:55
Installing the high-pressure hose 1:26
Low-pressure gauge 3:05
Panel setup 5:00
Mounting the panel 7:18
Boost pump 7:37
Connecting the boost pump 8:57
Potentiometer 10:05
#SeaWaterPro #WatermakerInstall

Пікірлер: 10

@Gbesase1 Жыл бұрын

It would be great to see a video on connecting the automatic timer as well as installing a diverter valve on or near the panel.

@tstemen1047 10 ай бұрын

Gotta get a price and find someone to help install it now. Good video.

@jonathancooksey138 3 ай бұрын

They also neglect to tell you that the panel will need a very specific housing, otherwise the hoses that go straight back and also to the side will not fit without a ton of extra room.

@paulbriggs3072 5 ай бұрын

So the outside seawater enters the system where? It would be nice to show a flow diagram,

@jonathancooksey138 3 ай бұрын

They use straight thread o ring fittings on tapered pipe thread holes into the membranes. But then again they skip that part of the install

@moanatane1832 7 ай бұрын

Great explanation video appreciate it thank you.

@jamesnguyen9033 10 ай бұрын

Please comment on why the booster pump MUST be connected directly to the strainer.

@seawater1322 6 ай бұрын

having a long hose from the strainer to the pump can starve the pump of water, especially if the strainer is clogged, a long run between them reduces the flow even more.

@jonathancooksey138 3 ай бұрын

They also fail to mention that the panel only has conections for the hot side. They fail use a large enough piece of plastic to actually be strong enough for the weight of the attached pieces. Get a unit from a different company

@jonathancooksey138 3 ай бұрын

Don't buy this watermaker. Besides skipping many steps in both their manual and this video, the design of the remote panel is beyond atrocious and will end up costing you in a very frustrating install.