Arctic Cat M8000 CLUTCH PROBLEMS

No video

Arctic Cat M8000 CLUTCH PROBLEMS | RESOLVED

Рет қаралды 78,496

Күн бұрын

The problems from the weekend have been resolved on the M8000. Clutches are not an uncommon issue on these machines, so here is what happened:
Syxxes Performance is dedicated to everything power-sport related, from installs, vlogs, to ride videos and even more. If you like having fun with motorsports, trucks and a love for the outdoors, you'll find it here. Semi-dayly vlogs keep you up to date with what is going on with our snowmobiles, motorcycles and trucks.
Subscribe to the channel and follow Syxxes Performance to keep up to date with our latest giveaways.
/ syxxes
/ syxxes1
/ syxxes_performance
Track; Dizaro - YouMakeMe Music provided by FlyingTunes Watch; • Video

Пікірлер: 92

@wthomasw2 6 жыл бұрын

Going to buy a next season looking forward to get into backcountry tired of the trail life !

@syxxes 6 жыл бұрын

You'll like it, even if it's a little intimidating a first. xD

@Ewaugh69 Жыл бұрын

Is there a way to get the plastics out of the way without having to drill out what looks like rivets to remove the clutch?

@brianmclaughlin2535 6 жыл бұрын

I fix my problem with Arctic cat clutches kwick. I bought a Yamaha. No more problems.

@kellybelanger5836 4 жыл бұрын

@Taylor Anderson are you too much of a soy boy to handle a little. Extra weight

@justinjeter3770 6 жыл бұрын

Coo man thanks for the update. Rip on

@renepage3239 6 жыл бұрын

Hi I had a look at your video, very good, I do have a suggestion though. Check your fly weight position between the towers. It looked like a weight had shifted to one side. This would cause the clutch to not fully open at idle causing creep. It appears to operate properly without a belt but creep with belt installed. If you do have this issue take is apart and replace the fly weight bolt as it would have substained forces it is not designed to and will break at the dimple in the middle of the bolt. The fly weight is suppose to be dead centre between the towers and a very small allen head screw holds it in this position.

@syxxes 6 жыл бұрын

Rene Page See the next video for the resolution.

@tommyschulte2577 6 жыл бұрын

I dont think cat clutches are junk. I clean them after every ride. Or just inspect them. Got over 7000 miles, no problems. They just like to be clean. I now have a sled with team clutches. I'll continue to do the same.

@syxxes 6 жыл бұрын

That's something good to mention. If you are able to keep them clean they should last. But, sometimes it's hard on those 4 day trips to keep them clean after everyday. A lot of dust does get built up in there.

@deansikorski6596 6 жыл бұрын

Compressed air, to blow out belt dust is quick and easy. Most people would be surprised how much belt dust there is after one day of riding.

@stevenbanman9947 6 жыл бұрын

I feel for ya I've gone through 3 arctic cat clutches on my 2011 m8. I now run a team clutch for a 2016 m8 and so far it work's very well

@syxxes 6 жыл бұрын

On those older ones I think the trick is to just keep the things clean.

@stevenbanman9947 6 жыл бұрын

That definitely helps.

@ianmcguire9535 Жыл бұрын

I had this same issue on my 15 m8000 it was related to a cracked spider on the primary clutch that would not let the clutch open all the way part that sucks is this year was not a team clutch and had to buy an entire new primary clutch since you can't just buy the spider and replace replace it

@coreybleecker0380 6 жыл бұрын

Are you going to buy the 2019 Arctic Cat

@syxxes 6 жыл бұрын

I don't wanna give anything away just yet, but I'm going to be talking about a build for next season soon!

@powderaddicts6364 6 жыл бұрын

Usually u should wait on buying a new machine because if you wait, it gives the company time to sell a couple 100 machines and if there were any problems they usually get resolved. My dads buddy bought a sled #82 was the production number it had all sorts of problems. Just saying it’s another good reason to wait a little

@alancall5113 5 жыл бұрын

Looks to me like you have a crack in your spider I can see it In the video Definitely Cooked Keep them coming

@dontecooper6040 6 жыл бұрын

Legends

@syxxes 6 жыл бұрын

@Narza85 5 жыл бұрын

Just bought a used 2015 M8000. about 2000miles on it. Test drove it yesterday and noticed it tried to walk too. And belt started to make some noise after letting it idle. I figured that the belt was too tight but it sits very deep in the secondary, whole belt below the plates... Take it back to the dealer...? Also the ignition key does nothing, u can just drive it without the key if you want... Had brp's before, made me think did I make a mistake... xD

@crosslakerealtor 6 жыл бұрын

Ok, I’ll give you that one, not what I guessed was the issue at all. 🤔

@jf8051 6 жыл бұрын

Keep rockin' it man! Greets from Qc!

@syxxes 6 жыл бұрын

Thanks for following! I'll be continuing breaking things!

@jesse.jsmall0652 Жыл бұрын

I’ve got a 15 m8 153 with no spark any tips or help?

@jesse.jsmall0652 8 ай бұрын

What’s the belt number

@billwolfe3601 6 жыл бұрын

pull your primary off and rebuild it!

@syxxes 6 жыл бұрын

Gotta watch to the end. Primary is off.

@wethenorthnorth1632 3 жыл бұрын

Hey bud I need help on a 2008 artic cat z1 Jaguar I need a primary or rebuild

@erkintop6341 6 жыл бұрын

I don't know but when you ran the sled up @ 1:30 or so you can see thing wailing all over the place. but good work keep up the riding.

@syxxes 6 жыл бұрын

They kinda always have a wobble in them at idle. Even when new.

@erkintop6341 6 жыл бұрын

@Eklund776 5 жыл бұрын

Had the exact same problem..

@tylerlaurentoutdoors2082 2 жыл бұрын

Do you know if you can start a sled without the primary clutch connected to the motor?

@syxxes 2 жыл бұрын

You can. Yes. But. It is going to be a real tough unit to pull over. The clutch acts as a flywheel for the PTO and assists momentum

@Triplemaniax 3 жыл бұрын

How many kilometers on that clutch?

@chasesyverson6136 3 жыл бұрын

How do you adjust the belt deflection on this style of clutch

@ianmcguire9535 Жыл бұрын

With different thickness washers used on the secondary clutch bmp has a bolt that will do this as well but is expensive for a plastic piece

@Lamelldiff Жыл бұрын

I heard 2016 and 2017 got better clutches, is that true?

@jerrychase4177 3 жыл бұрын

Clutches and belts would last longer being underdriven 25% of engine rpm

@juss-passin-thru 6 жыл бұрын

pto clutch has bent shaft, time for new clutch. guaranteed from overheating

@syxxes 6 жыл бұрын

You bet. She's toast!

@snowmanreed6374 6 жыл бұрын

yea, better check the crank run out while you have the clutch off

@2007dalin 6 жыл бұрын

when it was idling you could see the clutch wobble.. hard to tell from video but looked like more then motor vibration

@syxxes 6 жыл бұрын

They will wobble on idle. Its straight once its reved up

@ronsmith7973 6 жыл бұрын

You can see it at 5:00 in the video.... secondary gets pulled every time the primary wobbles.....

@deansikorski6596 6 жыл бұрын

I don't think anyone makes an aftermarket spider?

@RoboDriller 6 жыл бұрын

Didn't bdx? I know I seen a billet one somewhere.

@syxxes 6 жыл бұрын

Pricing out some options right now. Probably just gonna have to end up buying the whole clutch though. Unless I can find a spider kicking around somewhere.

@davidpayce5574 6 жыл бұрын

Dean Sikorski thunder products

@davidpayce5574 6 жыл бұрын

Syxxes Performance Thunderproducts. Or supreme tool

@turnerkoenigs9518 6 жыл бұрын

Dean Sikorski yeah your right 18 years ago you would be lucky to get 2000 miles out of it !

@torchind 4 жыл бұрын

your primary clutch prob broken from engaging it with no belt on it. you will smash them apart and lucky it didn't' explode

@syxxes 4 жыл бұрын

Old video! This problem has been long solved! Sorry! That wasn't the issue!

@TheAlaskaCajun 5 жыл бұрын

I see a crack @7:24

@kyletracey5819 2 жыл бұрын

With out watching. Ill guess ahead of time you need a skidoo. Lol. That crank looks like its got a wobble

@syxxes 2 жыл бұрын

4 years later: engine has 6000km on it, problem free.

@kyletracey5819 2 жыл бұрын

@@syxxes beauty.

@richardmaaske7483 5 жыл бұрын

need to put in a new primary clutch spring -put in a stiffer spring

@syxxes 5 жыл бұрын

What makes you say that?

@jesse.jsmall0652 8 ай бұрын

@@syxxesI want to run a set of spacers on the spring or a stronger spring had same issue had it fully apart and no visible damage or cracks so gonna run it

@ollhardcock 7 ай бұрын

Got this issue as well no cracks or breaks its bran new from cat

@mmrotax 6 жыл бұрын

Fuck i Have the same problem... must check it up. Good video 👍

@Aaron-co2jb 6 жыл бұрын

Damn junk just don't make'm like they use too

@syxxes 6 жыл бұрын

Riding too hard maybe? Gotta pay to play!

@Aaron-co2jb 6 жыл бұрын

Syxxes Performance well since you brought it to my attention you could back off it a little I mean after all it is a CAT

@syxxes 6 жыл бұрын

The way the clutching is on those older-ish cats, and anyone who has one can agree: "It's full throttle or nothing!"

@Aaron-co2jb 6 жыл бұрын

Syxxes Performance Now come on don't lie you just like to go fast

@Aaron-co2jb 6 жыл бұрын

Ty there is nothing wrong with admitting your wrong

@crazybcenduro7536 6 жыл бұрын

It does not look right when it shifts?😝

@syxxes 6 жыл бұрын

She blew!

@danyaleecallaghan8775 4 жыл бұрын

I think I can see a wobble in your clutch Buy a power block and be done with it

@swss12 6 жыл бұрын

were you honestly cleaning the primary while it was running??? my god........

@syxxes 6 жыл бұрын

Be careful! xD

@foghornleghorn3478 5 жыл бұрын

Lmfao how many hours before you finally pulled it and realized brushing and cracks u could see it in the video when it engaged wit no belt

@syxxes 5 жыл бұрын

Maybe 30 minutes. I'm a Cat tech, so wasn't long for me to figure out.

@Bodernem 5 жыл бұрын

That was some bad comments in the video!!! THE SECONDARY CLUTCH NEEDS TO OPEN MORE!!!!!!!!!!!!!!! Muppet!!!!! FOR THAT BELT!!!!

@Bodernem 5 жыл бұрын

Ok so it did not open!!!

@whixirc7564 4 жыл бұрын

Your belt deflection is not right lol , that was not the problem like you said but I say it , your belt is too tight , creep too much

@syxxes 4 жыл бұрын

1 1/8th inch to 1 1/4 inch. This is the correct deflection. Nothing was wrong with the belt deflection at all. Primary clutch cracked -Cat Master Mechanic