good visualization of the heli in the night with lights, good flight too. Congrats!!
@OnTheSnap113 жыл бұрын
FYI - 105mm holds great, which is a 15% increase in diameter of the tail, and puts the tail thrust back in lign with other models in this class.
@michaelbutler2915 Жыл бұрын
You are one bad dude! Great flight.
@jasonfalcon77036 жыл бұрын
Next month I'll have my T-REX Dominator 600E done although I'm running a Beast X gyro.
@killirishred13 жыл бұрын
@doublejdj1 i think theirs said too fast for proper governing because they were using a smaller tooth pinion than yours, i wish they provided more info. if they added 1 tooth more to their pinion they would not have recieved this message. but i've learned that if you caluculate your headspeed for reals, the cc esc's usually limit you under that by about 400 rpm. so raising it within those limits will work just fine even if you get the too fast for prop gov message. cheers!
@brianstayton25956 жыл бұрын
Unbelievable skills!!
@chingersfreind7 жыл бұрын
Man....I like this kids flying style!
@JamesRMikel12 жыл бұрын
mine had a tail authority problem until I actually set the tail limits out to the max they could be. Don't have a problem any more.
@rexhex955510 жыл бұрын
Du bist der Teufel... wie kann man so fliegen verdammt . Bin sprachlos . Will auch so fliegen können. Respekt. =)
@1helidude12 жыл бұрын
Awesome flying but I can say for sure before he hit the flight mode switch it was about 2000 rpm because that's where and how mine sounds. Then he added quite a bit more RPM for 3D. But the fix for low RPM is simply installing the Trex700 105mm tail blades.
@richardmid1207 жыл бұрын
4 years too late but you could have also installed the 600n tail drive gears to up the tail rpm.
@astrotrain10112 жыл бұрын
nice flight!
@hdconley12 жыл бұрын
I think the Align guys would have a pretty good idea of the RPM
@jacobdanna13 жыл бұрын
@irshaad57 How is this fake? You must have never seen an RC helicopter before. Its very real, and this guy is an amazing pilot. Good flying!
@BlackTitanium13 жыл бұрын
OnTheSnap1 is correct! You should not be getting that error message "Too Fast for Proper Governing" at a 2200 rpm setting. Reshoot the video, showing the Motor Gearing page and then the Head Speed setup.
@mccarterjg12 жыл бұрын
that moth at 4.15 got me
@killirishred13 жыл бұрын
i didnt know you could use headspeeds even if the CC esc says too fast for proper governing, i have read that castle creations is very conservative about their governer, which is a good thing. i have a trex 500esp, thunderpower 65c 2700mah packs, scorpian 3026-1600kv motor,14tooth pinion, CC icelite 75 esc, and spartan gyro, with stock ds510 cyclic and ds520 tail servo. my seet rpm mode limits my head speed to 2600rpm, which was not fast enough for me, so i set it too 2800 and it works great!
@tioevi3 жыл бұрын
Hi when you do fast climb outs? The tail stail hold? When i am doping whit mine it does not
@MrBoboFay12 жыл бұрын
Beautiful man, how many flight hours to get that good?
@sorrochazo13 жыл бұрын
@sorrochazo sorry by in English, I am Spanish. .jejeje...by many things .align thinks that we are all idiots.1 the program of castle for CC hv is brown, the blue are not only for ESC LV.2 when the marking rpm of 2200 in the Set rpm of the governor, indicates to him that the esc not longer can with that configuration, when in the real thing, can be until 2240rpm without darte that error.and 3 2200rpm does not create that noise in the shovelsto believe ,
@ciclone2710 жыл бұрын
MUITO FODA !!!!!!!!!!!!
@SgtPickledic12 жыл бұрын
Skill Level / Asian
@OnTheSnap113 жыл бұрын
A few guys tried to use HeliTach to tach the video. It's coming in at 2400RPM. Align can you please confirm your Castle settings and re-test the heli at 2200RPM? My experience is that the tail will not hold at all at 2200RPM in hard collective reversals, etc. The root cause appears to be a reduction of the tail gear ratio from 4.5 to 3.85 (ESP and all other 600's are ~4.5).
@dereksly222312 жыл бұрын
where can i go to learn even just half of this guys mad skills, love helis just dont have the skill, any one in Western Australia???
@Joop_Brokking12 жыл бұрын
Love the flight! I don't care about the rpm..... Let's enjoy the flight and forget the title. I bet this guy did ;-)
@crgonzalez0812 жыл бұрын
I think this bird have a different gear ratio because in the video you can read the program saying "to fast to govern properly" anyways, my with the stock gears the CC program tells me I need about 73% on my thr curve........ Any body knows what gears are he using in this video??
@MWXYT7 жыл бұрын
that moth at 4:15 made me think that something fell off :P
@OnTheSnap113 жыл бұрын
It looks like you entered the gearing information wrong. You don't get the RPM error until 2350 with the pro's 8.615 gear ratio and 510kV motor. Can someone analyze the audio in the video? Align - Please reshoot the video with a optical tach, and/or show the motor/gearing section in the castle software.
@terrybeb13 жыл бұрын
I guess the 95mm tail blades are holding......;)
@andreansyahification12 жыл бұрын
nice
@Waldiii200912 жыл бұрын
good job !
@NickLukefahr9 жыл бұрын
That's only a 600? Looks bigger than that! maybe it's just the high reflectivity of the bright colors on the blades in the low light... lol
@kriskrasm12 жыл бұрын
that acceleration
@pabloalexandre6976 жыл бұрын
Carai, eu fico so na vontade queria um elicoptero desse
@MrCofl100111 жыл бұрын
wow...just wow...
@WitthawatMongkolkrut12 жыл бұрын
เจ๋ง
@christophmash12 жыл бұрын
must have!
@welingtonsupra9 жыл бұрын
que legal
@lukaszpiotrowski846110 жыл бұрын
Cool
@williamdrabble87819 жыл бұрын
Wow I need to do that to my 600
@Network-Mike12 жыл бұрын
This isn't how my 600efl sounds at 2200...??
@marcoramirezsandi51111 жыл бұрын
wow
@5cheeta12 жыл бұрын
Man that thing so big it look fake but wow that's nice!
@padenkavnontun704112 жыл бұрын
เก่งจังอยากเก่งแบบนี้มั่ง
@kiwibob7211 жыл бұрын
Jesus, just how many people does it take to set this thing up and get it in the air? Apparently one on the laptop, one to fiddle with the flybarless system, one to run it around so the pilot does not strain himself, and of course the pilot to fly the thing. All for one model. Talk about over resourcing a situation ..... might go a little way to help explain why our parts cost so much!
@jamesedwards65897 жыл бұрын
kiwibob72 you know I was expecting a joke there lol
@Nobu-eb6mi4 жыл бұрын
チョーイイね👍
@ISamohtI12 жыл бұрын
Thats a Fake!!! The Headspeed is around 2400RPM!!! Analysed with the Heli-Headspeed App. It takes the sound to get the HS.
@matiasouza12 жыл бұрын
Very nice, but dont kill the birds.Thanks!
@Sharp79Channel12 жыл бұрын
Nothing can beat the sab goblin
@heriticpirate612 жыл бұрын
I think id cut my own head off with this thing....
@hydrojet7x7011 жыл бұрын
Nice Flight.... to bad 3GX Gyros SUCK.... Get a V-Bar!
@sarah200259 жыл бұрын
Unfortunately
@andreansyahification12 жыл бұрын
@LEV HAHAHHAHA
@zecsabbath71608 жыл бұрын
voozinho chatoeste tal de 3d.... pessoalzinho ai deve ser patrocinado... pra chegar ate ai deve ter arrebentados uns 300 desse ...
@adrianotinoco94107 жыл бұрын
Zec Sabbath por isso existe simulador pro cara aprender o 3d sem lenhar 300. É um estilo de voo acrobático e eu particularmente acho muito bacana tem que treinar muito pra chegar nesse nível e o simulador ajuda muito nesse sentido.
@zecsabbath71607 жыл бұрын
eu ja acho que o simulador não te causa medo, e a realidade sim, pois mesmo durnate anos no simulador, quando voce pegar o heli na realidade, voce sempre terá medo de lenhar .....no simulador voce aperta uma tecla ndo teclado e ja tem um heli novo...mas mesmo assim, o simulador ajuda e mito .....