Main points:
1) When removing the motherboard, you need to completely remove the residual power of the motherboard!
2) The shock absorber needs pressure relief!
3) The connectors on the main board need to be fixed with silicone rubber to prevent the connectors from being separated during use
4) Please adjust the four small screws of the column screw according to the shock absorber adjustment guide video
• Adjustment guide for t...
5) Do not disassemble the inside of the motor without experience and professional help
6) Pay attention to the heat dissipation gasket at the bottom of the main board, which needs to be properly fastened
要点：
1）拆卸主板时，需要将主板的余电完全清除！
2）减震器需要泄压！
3）主板上接头们需要硅橡胶固定，以免接头使用中脱离
4）立柱螺丝的四个小螺丝，请按减震器调节指导视频调试
• Adjustment guide for t...
5）请勿在没有经验和没有专业人士帮助下，拆卸电机内部
6) 注意主板底部的散热垫片，需要正确贴牢