@MrKeithStone Hi, Thanks for the question. The 289, 302 & the 351W will all use the same 6 bolt bellhousing therefore the T5 housing will bolt up. The 4sp styled shifter has the same threads as the 65-67 orig. The pigtail is an easy way to conect the back up light switch. It will connect to your factory harness and then plug directly onto the back up switch in the side of the trans.

I’m doing this for a 1965 ranchero. Bought a 94 mustang with the 5.0 and t5

Thanks for the comments. The kits offered are designed to work with the 86 to 93 Mustang T-5 Trans. The 94 and later have a longer input and would require a custom or modified crossmember.

I really love this video very informative clear and to the point

Would one of your 5 speed kits install into my 1968 Mustang fastback without any cutting to the transmission tunnel? My car is a factory 4speed car.

Can i fit 04. V 8 5 speed transmission on a 91 5 speed v 8 mustang

I have a 351w for a 66 could I use a modern bell housing and bolt it up directly? What Is the tread size on the shifter and what is the electronic pigtail for? Sorry I have tons of questions! Nice video!

awesome kits, do you have any kits for ford f-1 Pick Up Truck, with a Y-Block?

I have a 1970 Mach1 with a 351 cleaveland. It has the factory automatic. Can I put a t5 in my car with your kit?

Can I swap out an automatic transmission from a 66 mustang with this

How would I bolt up a T5 to a 200 inline six? Thanks, great informative video.

What is the price on your full kit for 67 fastback?

hi, i have a 65 with a 289, is it suitable to use a t5 from a 94 mustang for the conversion?

Does this kit also work for fairlanes? Does it work for 6 cylinders as well?

Well hoping maybe you will know, my dad has a 67 mustang with manual transmission but has at the end of the housing some wires on the side that he has never seen. He cant find nothing on them and they are fried at the moment. Any info would help thanx.

If in fact I may have to change the bell housing where would I find a conversion from Ford to Chevy Bell Housing?

I have a 56 Chevy with a T-10 4 speed in the car presently. I have purchased a T-5 Borg Warner transmission which has a tag #13-52-065-914. I have a chart that describes this came out of a 1984 Mustang 5.0L car. My question is: I have a Z-28 302 motor in my 56 will this trans bolt up to the 327 chevy bell housing? The T-5 has a 28 spline main shaft will I have to change the clutch? Will the tip of main shaft have to be cut in order for the trans to fit properly? The T-5 has a Yellow & Black tag that states " Use Decxron 11 ATF Only" which indicates it is a world class (WC) Transmission.

can u tell me the lenght of the yoke in the video thanks

I am installing a 302 v8 in my 1984 ford ranger 2wd. I was wondering what wiring will i have to do if i used a T-5 transmission.

Where can I buy all this? I can't find it on your website? Do you have a link for this set up?

How to i buy the shift and knob thks

felicidades buenos videos .............

good evening I'm desperate no one answers the mails or answer calls will be closed or what happened in the store the service is bad as I do to make me return my dollars or make the purchase to finish my project mustang 1970 or where I can go to present a complaint or where can you help me with my case or will I be a victim of something and nobody wants to say anything please dennis brad help help help someone help me or please the owners of sacramento mustang when they see this please your help help please