No video
TAB Performance H-D Touring Head Pipe Installation
Рет қаралды 53,738
Күн бұрынPlease Note: there is a portion where it mentions foot pounds for torque and needs to be inch pounds.
Installation Video for TAB Performance header for 2009-2016 Harley-Davidson Touring. Check out this and other great products on our website: www.tabperforma...
@jager7169 2 жыл бұрын
Great video, helped me out ALOT. only thing wrong was a couple spots said to torque at foot pounds when it should of been inch pounds. I snapped a few bolts till I realized it was wrong
@PickWithZ 4 жыл бұрын
Never in my life have i ever seen a crescent wrench that looks strangely the same as a normal open/closed ended wrench. But im rolling with it! HA!
@TABPerformance 4 жыл бұрын
Lol, shooting videos is harder than it looks. Thanks for the friendly jab.
@PickWithZ 4 жыл бұрын
@@TABPerformance All that matters is that you got the job done! I am sure there is a tool somewhere in my space that ive called incorrectly my whole life! lol
@codytripp6822 3 жыл бұрын
I have these on my 2014 RK with 4” zombies and Woods cams, they sound amazing! TAB makes high quality stuff and that sound.....!!!
@lawrencehufford2165 3 жыл бұрын
I had to use a 3/16 allen for the factory bracket on the cross under pipe. Not sure if I'm an anomaly or there is a misprint on the video. Of all the tools, that's the one I had to run our for because all my Allen sets are Torxs or metric. So frustrating! Great video, super excited for my pipes!!! Thanks guys!!!
@tonyrath9158 2 жыл бұрын
Top tip using piston ring pliers to get those darn exhaust flange clips back on over the Reinhart's. I could get them off the original system no problems, but man I busted my balls and dinged my fingers up pretty hard trying to get them back onto the Reinhart headers. I must have spent 2 to 3 hours trying to get those suckers on. I tried grinding some circlip pliers into a shape that would grip, but no luck. Then I saw this vid. Straight up to Supercheap Auto and got a pair of piston ring pliers. 2 minutes, and the clips were on the new pipes. Thanks so much for this vid. 👍
@TABPerformance 2 жыл бұрын
That is awesome to hear! Glad the video helped.
@TABPerformance 8 жыл бұрын
Torque requirements should be in in-lbs, not ft-lbs as mistakenly mentioned in the video.
@motomouth33 7 жыл бұрын
yes. i just noticed this. youll snap the studs on the exhaust flange if you use foot lbs, its inch lbs not ft lbs.
@Promod2001 4 жыл бұрын
I was about to say, where is he getting these torque values
@Thunderbuns-il8ri 3 жыл бұрын
It's all good. Added to the entertainment value of your video!!!!!!!! Great video over all and remember.... Words are hard!
@mikeruggeri4043 2 жыл бұрын
Thank you for clarifying. I was really scratching my head getting ready to put mine on
@meandkathinkihei 2 жыл бұрын
Trust but verify.
@zchopper62 2 жыл бұрын
Never mind they are piston ring pliers. Thanks for the idea!
@TABPerformance 2 жыл бұрын
Glad to help
@shannonbarrios6484 2 жыл бұрын
Video was super helpful especially the part with the retainer ring tool , was wondering if the was an easy way to take those on n off , now I have my answer thank you
@realestaterider 6 жыл бұрын
What are benefits of the after market O2 censor compaired to stock?
@angelsuarez17 6 жыл бұрын
Nice clean install. Great video.
@1Bigduff 4 жыл бұрын
torque exhaust nuts to 100-102 foot-pounds??? that seems awful tight for those studs. could it actually be inch pounds?
@TABPerformance 4 жыл бұрын
It is inch pounds and we have several comments in the bottom field, but working on figuring out how to update on the video.
@johnnygoodlife 6 жыл бұрын
Great video. It really helped me. Thank you!
@nickmarzella7701 Жыл бұрын
Great video, where can I get one of those pliers from? Thanks
@reginaldpartlow8925 2 жыл бұрын
Very detailed. Thanks
@TABPerformance 2 жыл бұрын
Glad it was helpful!
@zchopper62 2 жыл бұрын
Where did you purchase the exhaust c clamp puller?
@roberthighsmith4150 Жыл бұрын
What is that retaining ring tool and where can I get one?
@TABPerformance Жыл бұрын
Piston Ring Pliers www.mscdirect.com/browse/tnpla/30335350?cid=ppc-google-Smart+Shopping+-+MAC+-+Fleet+Maintenance&mkwid=%7cdc&pcrid=575620779981&rd=k&product_id=30335350&gclid=CjwKCAjw79iaBhAJEiwAPYwoCFUvAoRLlBzyL6huOhQCTRJAAWZbE6xTk0iWVQWyay9iqTdjWuy_5hoCrjMQAvD_BwE&gclsrc=aw.ds
@gaknskk 6 жыл бұрын
What is the advantage of using the 18 mm bungs vs the stock 12 mm ?
@TABPerformance 6 жыл бұрын
Wider range of tuning using a wide band O2 vs the narrow band.
@stanr9397 3 жыл бұрын
Are these considered true duels?
@TABPerformance 3 жыл бұрын
These are considered a 2 into 2 because it has independent pipes with a balancing chamber. True Duals would never connect, and a 2 into 1 into 2 would be a central collector like the stock pipes on the newer bikes. Hope that helps and thanks for watching.
@UruguayChoppers 5 жыл бұрын
nice
@boblafountaine9560 6 жыл бұрын
Why not show an install on a 2017 so we can hear what it sounds like on the pathetic Milwaukee 8 ? Anything you put on a 16 or older will sound good so please show a M8 head pipe install so we can see what it sounds like ! Thanks
@TABPerformance 6 жыл бұрын
Robert we are still working on our 2017 headpipes, we should have them soon as we are just waiting on finalization of tooling.
Matt Laidlaw
Рет қаралды 88 М.
SIK Baggers
Рет қаралды 114 М.
Bry The Biker
Рет қаралды 129 М.
Full Throttle HOG
Рет қаралды 100 М.
Ride Like a Pro Jerry Palladino
Рет қаралды 35 М.