Рет қаралды 53,227
This table was designed to hold my 100th vase. It is made in the same woods as the vase, Ziricote and Maple veneer. The round table has 3 bent lamination legs. The vase is designed to spin, I used a motorized turn table that inlayed into the table. It holds up to 55 pounds so it has no problem rotating the vase. It is hard to tell but the legs on this table splay outward about 3 degrees so they flow with the wides part of the vase.
Thanks for watching! Please Subscribe! Links to the things I used below
-Toth
Motorized Turn Table: amzn.to/2DsXgHx
Flush Trim Bit: amzn.to/2OusbEA
My Chisel Set (2 Cherrys): amzn.to/2DaEKTm
Easy Woodturning Tools: amzn.to/2ATlM23
Finish I use: amzn.to/2DaqxGb
Many good things to come! woodbytoth.bigcartel.com
Bessy Clamps: amzn.to/2zxLzfP
Kreg Jig: amzn.to/2OcuXSV
Impact Drill: amzn.to/2xUgsc3
Shelf Pin Jig: amzn.to/2Ip42hr
Festoon Domino: amzn.to/2zxWNAR
Rockler Router Table: amzn.to/2N4G3Ve
Hand Saw: amzn.to/2FWKkIe
Triton Super Jaws: amzn.to/2BuO3y9
Triton Power Sander: amzn.to/2BiJW3X
Bandsaw: amzn.to/2FV6GK4
Dado Blade: amzn.to/2rmHclE
Bessy Clamps: amzn.to/2rpebWm
Grinder Wheels: amzn.to/2DTDvFT
Store: woodbytoth.bigcartel.com
www.woodbytoth.com
/ woodbytoth
/ woodbytoth
/ tothtoth
My Lathe- www.grizzly.com/search?q=(G0799)
Check out www.grizzly.com and use the code TOTH10 for 10% off 12 different Grizzly Lathes.
Lathes:
www.grizzly.com/search?q=(G0624Z)
www.grizzly.com/search?q=(G0733)
www.grizzly.com/search?q=(G0632Z)
www.grizzly.com/search?q=(T25920)
www.grizzly.com/search?q=(G0766)
www.grizzly.com/search?q=(H8259)
www.grizzly.com/search?q=(G0800)
www.grizzly.com/search?q=(G0632)
www.grizzly.com/search?q=(T25926)
www.grizzly.com/search?q=(G0694)
www.grizzly.com/search?q=(G0462)