As a godhand owner I can say they are 100% worth it.....with a caveat. They're 100% worth it for gunpla building as they cut cleanly and don't tend to leave stress marks that show up as white patches on an unpainted gunpla model. For warhammer or other tabletop games where you're going to be painting the model they'll still cut clean but the value isn't quite as apparent as the paint will cover any surface imperfections

I have worked construction for most of my adult life. Something that was instilled in me by my mentors was, buy the highest quality tool you can afford. The price difference is a payment against frustration and shotty work. I also had a mentor tell me that you rent tools, they all wear out eventually, and if your tools don't wear out you aren't working hard enough. So when it comes to hobbying tools i follow the same approach as i do with other tools. Its far more a waste of money if i don't use the tool as opposed to ising the tool and it wearing out.

I like to say that as a hobbyist your best friends are metal shop, hardware store, medical supplies store and cosmetics shop. Most essential and cheap tools are found there.

Ohhhh, "Live, Laugh, Love" would be great stenciled on the side of my post-apocalyptic tanks for a certain tank mini's game by a talented game design studio. Shameless plug. Thanks for the idea!

My missus bought a cricut for designing stuff for our wedding but I found it really useful. I put all my Bloodbowl teams in their own custom cases and have their team name and logo on the outside in vinyl

For brushes, when I'm teaching beginners' painting classes, I tell my students to only buy really cheap or really high-quality brushes. If you spend $0.50 for a cheap acrylic brush, it will probably last just fine for one or two models before it starts to hook. The same is true of a $5-10 acrylic brush. (They might last one or two more minis). The Da Vinci Maestro Series 35 brush I'm using now, I've been using as my primary brush for almost 2 years now. It cost me something like $18 through Dick Blick. It doesn't take as much care as you might think (that's one of the advantages of a Kolinsky), but of course if you let paint dry in the bristles or leave it sitting point down in your rinse cup you'll wreck it, so there's that. The experience of painting with a quality brush would be worth the extra money by itself but the longevity makes it cheaper per model to use a good brush than a cheap brush for me. Just my $0.02, or perhaps $18.

Oh man, now I feel the need to do a Chaos Rhino with “live, laugh, love” stenciled on it!

.... The first time you load up a pin drill with 0.5 drill bit.. And attempt to drill a hole in the foot of a figure of a 60 bucks model... Still gives me nightmares..... Every time. Lol. 😁🤣

A note on the Artificer brushes, they're re-branded Windsor & Newton Series 7 brushes.

I have no expensive hobby tools. My tools are like the brave soldiers of the Astra Militarum. They are here to serve a purpose, and once that purpose is served, they die with honor in the name of my hobby and are forever buried in my work room waste can, soon to be replaced by another courageous, and cheap, warrior.

Inkscape is an excellent open source vector graphics program. Free, as in beer and free, as in speech. Works on all desktops too.

9:30 to 10:00 - I made the gate for the Proxxon using old Legos. A single row lego just fits in the guide groove. Same for the circle jig, I glued a thumb tac pin from the reverse side a of a flat Lego tile. Those accessories fron Shifting Lands can be quite expensive IMHO.

The proxxon and guider pro upped my terrain making no end. As a bonus, they make working with expanded polystyrene far less messy. I also bought the shifting lands circle jig 2.0 - the first one didn't have much over a homemade jig, but the second one has a ton of handy bells and whistles. I don't own a cricut, but some friends do and I made some designs for them using inkscape, which is freely available. It doesn't have all the oomph that illustrator does, but it certainly gets work done.

Design nerds unite! Cricut, stencils, vector art are all worth the time (and $$$)

Frisket... You are the first human I have heard use that term since 1987 when I was in my graphic design class, hovering over my California Job Case, typesetting for my school paper. I use it frequently myself, especially the liquid variety which is a godsend in panting miniatures. Say what you will about it being old fashioned, but there is a definitely an undeniable suave style to being perched in front of a drafting table, red masking your layouts for the next print job.

In this video Adam talks about expensive freeze pops... Longbeard here, been "hobbying" for 30 years. Can't go wrong with zuron clippers. £7 a pair. I have a H&S Ultra airbrush (bought circa 2016), and a Fengda bd183 airbrush (£90ish vs £48ish). The Fengda is my "daily driver", because H&S nozzles/needles cost around 2-3 times those for the Fengda, and in a small way I do regret buying the Ultra, it just doesn't do any better than the Fengda. I used to buy GW brushes, way before they rebranded them as "artificer", and we all know they're W&N Series 7. I had a couple of series 7's but found them to be no better than the Creative Models Kolinsky sable brushes I buy at £3ish a pop. Most "hobby" tools have a cheaper equal alternative.

I’m so super frugal that I still blue tack my models to a soda bottle cap for painting. The upside, other than price, is that I can have a half dozen models in process at the same time. That said, I always start with the intention of batch painting but then wind up pretty much finishing one model before moving on to the next. Which goes a long way to explaining the mountain of shame.

By and large, I go by "buy once, cry once", but that doesn't necessarily mean buying the best is always the right answer. Sometimes the 2nd or 3rd best option will work just as well and you avoid the sense that the tool is somehow "precious" and to be used sparingly.

My partner has a Cricut and she had some textured cardboard for it so I got her to cut out some shingles for terrain roofing, worked a treat.

I got a laser cutter and have been using the hell out of it, making your own wood buildings for terrain is great. "Oh, I need a church" press button, assemble.

Love my God Hand nippers. But only use them for fine clipping from sprues. I have cheaper ones for general cutting. But I have NOT used my Artis Opus brushes because I worry about ruining them like other brushes…LOL

I totally have that issues as well. One of the main reasons why I don't use my fancy brushes or paint larger minis is the fear or ruining them.

When you were talking about tools we couldn't use as kids, I immediately thought "sewing scissors," and then you said it too. Lol. It must be universal.

God hands used to be the only option, For standard minis any cheap “single sided nippers” will work well enough. They can be bought for 10-30 dollars. They are knock offs of god hands but miniatures don’t need the precision and often have harder and thicker gates then gunpla.

I buy cheap $10 clippers from ACE, made in the USA. For brushes, I buy cheap synthetic ones and after they start not holding their tip, they go in my junk brush cup for basing, shading, drybrushing, etc. I have a nicer set that was around $20 but only use that for fine detail likes eyes or superfine highlights. I use a 3 and a 0 for almost everything. I think the biggest thing I learned about brushes is rinse them often even if batch painting and using the same color paint. Once paint starts to dry in the bristles, it's the start of game over.

I use clippers that I got from the makeup aisle at my local Fred Meyer (Kroger). They have a nice flat cutting edge on the backside, which is what you want. I paid around $10 US for them. After a few years, and a lot of use, I noticed that they were not as sharp as they once were (like most of us), so I got another pair. If each one lasts me 4-5 years of heavy use (plus, I can still use the originals, they're just not super sharp), it would take me 40-50 years to make up the cost difference with the Godhand clippers. By that time, flame-throwing robot dogs will have ended us anyway, so I'll save the cash now, thanks. Brushes are tough. I bought some Kolinsky sables that were ordained in secret rituals to never lose their perfect tips, and... yeah. Didn't last. I see videos about how to maintain/recondition/resurrect your brushes, but I've never been able to get the results the content creators do. I do like sable rather than synthetic for most things, but I've come to accept that brushes are not forever. I buy decent ones from my local art supply store, and I do my best to keep them alive for as long as I can. At some point, they migrate to the 'utility pile' of brushes for roughing in things, or scenery work. Circle of life... :)

I have invested in two Neewer LED light panels and have them attached to my hobby table with table clamps and adjustable arms, also by Neewer. These light up my entire desk, and I can reposition them as needed for the project I'm working on. The lights are adjustable for both temperature and brightness. They are 97+ CRI, with a temp range of 3200K-5600K. I usually keep them set around 4800k-5000k. It makes both working and painting tons easier.

I mean, the artificer brush is just a winsor newton with a citadel handle. It's a good brush, and if you can't source winsor newton, artis opus, rosemary etc. for reasonable prices a decent option. Citadel will always be more readily available.

Godhands are absolutely the smoothest cleanest nippers you can get. I have been using cheapo Amazon nippers but building some fiddly Drukhari I busted out the Godhands and... wow. I genuinely forgot how good they are. Absolutely worth it. GW Artificer brushes are trash, tho. Windsor and Newton are leaps and bounds better and cheaper. Cheaper still are Vallejo Pro Modeling brushes. They are great and a great value.

My Proxxon has been a godsend for making terrain. I have a decent collection of add-ons from shifting Lands and Dungeons By Hand and it has really brought my terrain making to a whole new level

Oh yes. I love the art supplies topics. A couple months ago, I splurged on a nice, expensive, natural sable brush (for painting minis) and I was a bit apprehensive for a couple days. (In art school I always used really crappy brushes.) I did eventually overcome the fear/anxiety and it was worth it. Since then I’ve purchased 4 more fancy brushes in various sizes and also discovered a new brand (*new to me) called Velvetouch art brushes (red handle version). I highly recommend them and they’re not as expensive as the natural sables. I am a thorough (some would say “OCD”) brush cleaner and use this stuff from Blick called “The Masters: Brush Cleaner” - which works great. Of course, if you don’t like brush maintenance or don’t have a consistent brush cleaning routine then I’d stick with your usual synthetics. 🎨

My expensive hobby products are: 1) A good brush. I use one brush for everything and I use the best brush I can buy. When the tip wears off I buy another. I don't worry about it because I know that every second of my painting experienced is improved by a good brush. It doesn't matter about skill or quality of the paintjob. You can definitely do the same thing with a synthetic brush but for me the experience is worth the extra cost. But then, I buy a Rosemary & Co pure kolinsky sable brush for $14 CAD 2) Vortex paint mixer. Before cheap models were available on Amazon I bought a refurbished lab mixer. It is expensive but worth the cost.

I have an Iwata airbrush that I'm terrified to use. I bought it thinking I wanted the 'best' one I could afford, but then learned you're better off learning with a cheapo, as you can easily clog them when still learning airbrush technique and maintenance.

I have 2 expensive things that I use specifically for painting. 1) my lights. I have a good set of LED photo lights that I use as my painting lights. It's made a huge difference in my ability to paint easily. 2) A good airbrush and compressor. I use my airbrush so much, and having a reliable brush and compressor really makes painting things with it stress free.

I'm especially amused by the comments about the brush. I'm in a similar situation with a Windsor & Newton series 7 brush I asked for and received as a gift some years ago. It's the only non-synthetic brush I own and have yet to work up the courage to use it. On the other hand, I recently bought a set of "Uncle Atom's favorite" brushes from Monument Hobbies and am really enjoying them. Even though they cost more than I've ever spent on a single brush before, I feel like I know how to take care of synthetic brushes, so I've actually been able to use them without worrying too much.

A friend of mine once said something only has "value through use". I try to remember this when I worry about breaking a tool. A tool broken through use is more valuable than a tool that never gets used. The money has been spent, you might as well use it.

I don't have a gw brush, but I do have some natural hair brushes and I love them. They don't require that much care, in fact accidentally leaving them in the water cup seems to do less real damage to them than it does to artificial, however I really only use them for detail work, (eyes, mustaches, edge highlights, and lining, etc.) Most of the time I use synthetics for basecoat, wash, and drybrush.(especially drybrush)

I purchased a "Wow Stick" one of those low speed hobby drills. I use it for pinning and mounting models. Very nice and worth the price, it's low speed makes it much more controllable than a dremel tool.

Godhand clippers/nippers are fantastic. They are great at what they do, perfect for gunpla do to the size. And good for small connection points for GW style kits. I use cheap nippers to clip the big sections and Godhand for small points and cleanup of the large snips.

Great video, and you are looking sharp to boot. Thanks for all your hard work.

Every scenery build project of mine starts with installing my Proxon hot wire cutter. Totally worth it. There are 2 things to make it a better product, the guider pro 2.0 from shifting lands and a footpedal attachment (so that you can use 2 hands to handle the foam and your foot to switch the machine on (or off).

I used to have a robocutter when I was doing paper terrain. It was a model or two before the cricket. Amazing machine and really helped speed up the process of construction.

I've not used a Cricut cutter but I have made extensive use of a similar item; the Silhouette cutter to make paper and cardstock terrain.

I bought an older Cricut used in a yard sale cheap. I had to buy a cutter head(didn't have one for some reason but the new one is actually an aftermarket upgrade with a few more options), a cartridge(older machines need them for the basic cutting info), a printer cable, cutting mat, and a program called Sure Cuts a Lot 2. With those I had maybe $40 total in them. And I downloaded Inkscape(vector graphics program) for free. With all that I could cut anything I wanted pretty much. A year later I traded the Cricut and some cash to move to a bigger Cricut(still an older model with the cartridges). Which maybe added another $20 to my outlay. And doubled the width of the cutting throat and the length of the cutting mat. I can still use this cheap work around to make what I want. You just don't have access to the online Cricut maker stuff. But the deals are there if you look. Loads of people buy them, then don't use them as much as they think they will. Then dump them cheap to get them out of their way. You have to have a computer. But even a cheap laptop would probably work.

1. Godhand: Any tools used for Gunpla are fantastic for minis. Especially Godhand. Just got some Godhand scribers for panel lines and they are BUTTER SMOOTH. 2. Brushes: Just buy cheap sable water color brushes from your local art store or amazon. 3. Cricut: I kinda want a Cricut for styrene sheets. Frisket is a fantastic use, too. They make smaller models. Inkscape is an open source vector program, should work fine for this. 4: Hot cutter: Maybe if I start working with foam. Most expensive hobby tools I own: My 3d Printers. But I can model and print my own stuff. Still, there is a lot of stuff you can just buy that someone else has made to print off. No regrets, but it takes a LOT to experimenting to learn how to use them properly. Money saving tips: You can get a LOT of milage out of cheap CNC bits and a pin vice. Look at tools for other hobbies: Jewelry tools in particular, but leather hole punches work just as well on styrene. I'm staring at a cheap mini-lathe that is saying "buy me." Craft sections of dollar stores and big box stores sometimes have useful nuggets. Wax paper is perfect as a disposable pallet for paint mixing (unless you are going for very thin paint, then you'll need something to contain it). Always look outside the hobby, you might be very surprised what will come in handy. Quality Tools tips: Find an art supply store, preferably a small independent one the college kids use if you are in a bigger city. Use water color brushes for mini paints, since those are applied in thin coats. Drafting supplies, particularly stencils, are super handy.

as a gundam guy that does sometimes wh40k , yes , the godhand are the crême de la creme of nippers , but theres a caviat , the amount of plastic that we usually have to cut from the sprue is minuscule compared to the chunky ass sprues that GW makes because they love to waste plastic , so IF you have a godhand or recently purchased it , DO NOT use them for GW sprues , maybe for minor details like , you want to cut a hand from a marine arm , some antennae in a turret , minor detail

I've used a set of xuron cutters for years and actually have a few harbor freight flush cut pliers in my workshop that I use for other tasks that work great. Truth is it doesn't matter how good the cutters are my process will always have me cut the sprue first leaving a large chunk on the figure then trim the chunk because it reduces the likelihood of having to do repair work on a piece. Even this is less relevant on newer models because a lot of the time they have the sprue connections obscured or interior to the piece. I think my favorite expensive hobby "tool" are my commercial file cabinets. Bought them cheap when shuttering a bankrupt company they have a door that flips up and a flat shelf that rolls all the way out so I can use the full depth of the shelf and each shelf is rated to hundreds of pounds because they're designed to hold folders full of paper.

It’s worth a trip to the art supply store to get a sable hair brush. I think it’s a little overblown how much you have to care for them, you just use them like a brush and clean them with brush soap once in awhile, and accept that you’re going to wear it out over time, then it will become a utility brush, then a texture paint brush, etc. The precision you get from a sable hair brush makes painting more fun for me…. very worth it. A marked up Gw sable brush on the other hand…

I feel you on the artificer brush, I had the exact same experience, was at the store and thought "well, I should buy something to support the shop" and was surprised by the price. I left it unused for a while but now, having used it, I know that in my hands, I would have been just as well off with a brush that was half the price.

Great video, Uncle! I feel better about the kolinsky sable brushes I bought a year ago that I still haven't used. I think it's about time I paint some orks with them👍🏽.

I too have unused or underused tools in my shop. But, I think tools are one of the best investments (in yourself) that you can make. What is your time/effort worth, and when you do use those tools, how much have you saved? What these tools that you mention cost, you can spend in an average restaurant for lunch (which I often do), and poop it out later. I rarely know what I am doing when I try something new, and I am often glad to find that tool that I bought years ago and had not used yet is exactly what I needed. I also spend thousands each year on various forms of obligatory purchases like car/house/health insurance. Man, that would buy a lot of tools and materials. So, yes, sometimes we err in our purchase decisions, but it is a drop in the bucket, practically speaking, and I live by "he who dies with the most tools, wins".

I was a fool and went in to GW for a brush, picked one off the shelf and brought it up without checking. My wig almost flipped when the bill was 35$.

use the GodHands. I actually dropped mine not less than two weeks after starting to use them and the only thing that broke off was that little pin to keep the tool from opening too wide. So I pulled the spring and they've been part of every model project I've done in the last three years of use. ONE IMPORTANT NOTE: well, two actually: Make sure you tune that gap bolt to keep the bits from impacting . They should just meet. Don't cut anything thicker than the gate. I actually use a Bandai Beginner's Level side cutter to remove parts at about a 1/16th inch away then trim up with the Godhand. The stuff I've bought that I haven't used yet is mostly because I'm still working with the just I already have. There were some brushes I was hording but I recently got a commission project so I'm using them now.

As a terrain crafter, I use my proxxon almost daily. The guider pro and angle cutter are a must have.

I can honestly say my wife and I got excited about getting a Proxxon a few years ago. It hasn’t been out of the box yet.

hey adam, i have a proxxon and the best thing for me is seeing my sons learning on it to craft blocks, ramps and other shapes. beeing in a lucky position of having one and just goof around with it. previously i used it to build terrain (stone bridges and towers). hope this helps.

The scissors you’re not supposed to use for your freezer pops are Gingher fabric shears. My mom had a pair too. They’re ~$60 a pair.

I collected the warhammer imperium subscription for more than a year; and only came to magazine 23 because life and stuff. I recently cancelled it because it got soo expensive but seeing how warhammer changed prices now, I am very happy to have a large backlog of miniatures waiting for me for my hobby time.

When I first got into the hobby I used cheap nippers. First big upgrade was to tamiya thin nippers. It was amazing. Last December I treated myself to a pair of God hands. Best purchase I have made for the hobby.

As far as the clippers go, saw a nice looking pair at Hobby Lobby for $7 just yesterday. But I already had some clippers from the $1.25 store. Now there is a good place for hobby supplies! Also use cheaper brushes, but not the dollar store ones. Those don't even have a pointed tip. That foam cutter is intriguing, might get one of those someday!

God hand SPN-120s have been invaluable for kitbashes for me, the cut is so clean that it makes things far easier and saves me hours on projects.

The expensive tools that I need to use more often are all my Northwest Short Line modeling tools. Things like my True Sander and Chopper. For those not familiar Northwest Short Line makes tools and hobby products used a lot in the scratch building, model train, and sculpting community. Lots of things for getting perfect angles, fitments, etc. on various types of polystyrene shapes. They are a god send when making master models for production. They might be a bit overkill for terrain building or conversions but you save so much time when your 45 degree angles gets cut right every time on a build.

Yeah, the only expensive things I have are brushes and green stuff. And Citadel paints of course. Everything else came from the toolbox in the garage. I don't have a wet palette, just a bundle of wipes in a box.

I put on this video while I'm assembling models, and you got to "God Hand" while the exact same pair was in my hand to clip some parts away. They've been worth absolutely every cent I paid for them. I've owned a whole bunch of different nippers, and they're just a whole different thing.

Mainly use my army painter brushes since I'm too afraid to use my artist opus S ones.

With regards to the God Hand clippers. I do not use those particular ones but I have a pair that are similar by Dspiae. I love them typically i use my Citadel and AP clippers to clip the parts out and then go back with the Dspiae clippers to take the nubs off and little to no clean up is needed and you never end up with a divot from where the clippers pulled out extra plastic.

Bought my mini clipper from a homedepot in the dry flower section a decade ago. They are supposed to be used for clipping wires. So the edge would be pretty rough. Then last year a saw a review of the godhand clippers and thought, that can be cheaper. I took a metal file and filed the back kompletley flat and sharpened the angles a bit, now I have a super flat cut like I get with more expensive clippers and all for 3-5 bucks and some extra minutes of work.

Another good video on expensive tools. To be honest I have the Proxxon hot foam cutter. I use every so often for those crafty projects like you mentioned, and I'm very happy on the purchase pre-Covid at $100 in Amazon. As far as brushes...uuugh...I'm with you on the expanse versus eventually ruing it down the road. I buy average brushes and quite satisfied of the results I get. Clippers are worth the cost for the clean cut. As a modeler before a gamer...a must for those small tight parts which can break when you clip them off the sprue. Now that Crique machine sounds interesting, but not ready to make that leap. The only other expensive tool I've bought in the past several years was an FDM 3D printer and a resin printer last year. Those are great tools and easy to maintain. I'm not one of those guys which try to dial in the precise setting for a print...so less stress on my part. I use these guys a lot, especially for bigger projects. Anyways, goos video and take care.

I have the godhands, and yea they are really good. They are really for removing the nubs after the part is removed from the sprue. I use these along with my Tamiya nippers.

Proxxon cutter is a must have for anyone who loves making terrain. Can’t tell you how much I’ve used it to great effect. You can also make your own guides out of wood.

Good clippers are very helpful as they minimise clean up of the attachment point. Wouldn't dream of buying GW or other gaming branded brushes, I have destroyed too many Windsor and Newton sables in the past with Humbrol enamels😂 - worth it for the results and regular cleaning with a brush soap certainly extended their life. For better or worse I have come to treat brushes as consumables. I borrowed a friend's Cricut but baulked at drawing up the graphics, my own lack of experience, however, even just my hand cut masks really up the look of terrain. Proxon is excellent for cutting foam - if you do any volume of terrain building it seriously improves the quality of the results. Great video as always 👍

Listening to this video as I paint with my cheap brush and that set of nice table brushes staring at me from across the bench 😂

I have the expensive tamiya clippers. Ill be honest, nothing i would recommend for beginners, but after 20 years in the hobby it is a really nice to have.

Sable brushes last just fine if you rinse them well and use some brush soap on them right after rinsing. The Cricut I've considered but held off. I've used the Godhand clipper some, but mostly been working through half painted old metal figures & 3D prints the last couple years, so not clipping plastic much. The Proxxon I only get out occasionally, but I have made some fun stuff with it.

Godhands are amazing! Maybe a little overpriced but it's pretty obvious the difference between them and normal clippers.

I don't have the artificer brush or the godhand, but I do have the Army Painter Kolinsky Masterclass, and the Dspaie 3.0 nippers. But are alternative equivalents. The masterclass brush is alright, it holds a sharp point, but since purchasing a full set of rosemary 33s, the masterclass has become sort of my beater sable brush. I use it mostly for edge highlighting with metallics. The Dspaie nippers I use on every model I build, and am so glad I bought them. They can get much closer to the model than other snips without risk of ripping plastic. Which means a lot less sanding or use of an exacto.

I have a couple of Kolinsky sables that I use on special occasions. I use synthetic hair and nylon brushes for most work.

I can't imagine that a citadel brush is more worth / has a higher quality than a Raffael or Winsor & Newton Brush. I wonder if citadel just sells rebranded Winsor & Newton brushes

I have the proxxon, and several tools from shifting lands. I have used it twice. It is great if you want a second time consuming hobby of building terrain. If you think you will like that, it is the best investment you will make in that hobby - but it is a totally different hobby that mini painting.

A little extra for clippers or any tool is worth the money if you use it, and it does the job it's supposed to do better and easier. Some jobs require an expensive tool to do the work, but there's room for cheap tools, too. I buy my picks and hemostats, etc. at a local flea market very cheap, and last practically forever. Things like that don't have to be high dollar. Modeling is not all that expensive compared to other hobbies these days, but it sure isn't as cheap as when I was a kid! Some expensive tools aren't for beginners, and not worth the money if you're just going to damage it, or don't have a need for it. "Good enough" is good enough, and there's nothing wrong with keeping cheap versions of tools around to save wear and tear on the expensive tool when it's not needed. For example, I have three anvils in my shop. One on my welding bench made from a piece of scrap RR track for when I have to knock something around a bit ($25), a practically junk 65lb farm anvil for those who "want to give smithing a try" that they can't make any worse, or for when quick and dirty is enough ($150), and a 3-0-0 (311lb) Fisher blacksmith's anvil from WW2 (Navy) in pristine condition that no one uses but me ($2700 and climbing). As a good example of tool inflation, the Fisher I bought & shipped from EBay for $600 a long time ago, it would cost me that or more just to ship it today. Talk about a retirement fund.....

Early on when I was getting back into the hobby, I ended up kickstarting Squidmar's brushes and still haven't used them. It's also a situation where they are sable brushes and I mainly just use synthetics now, but I also was initially afraid of ruining them because of how expensive they were. They come in a really nice looking package at least. 😅

After watching the Goobertown Hobbies video about cleaning and repairing natural hair brushes versus synthetic brushes, and comparison under his microscope, I did buy a monument hobbies, natural hairbrush. Brush maintenance and keeping the tip on that brush has been so much easier than my synthetic brushes, but part of that may just be having more experience and knowing a little more what I’m doing now.!

Most of my tools were either purchased way back in 2010 when I didn't have kids and more disposable income or from when I work an estate sale and the house contains items I can use.

I have a two-trees 20w laser that I bought for making terrain and I've used it to make 3 small buildings for terrain. I have however used it for a variety of other things but none of them are the actual reason I bought it. It cost me around $600 for the laser and I've since purchased other things for it so I can do even more things that aren't what I originally bought it for.

I bought the not-latest Godhand clippers at Christmas ( £30 older model, the nearest ones are £50). I really do like them and I've used them a lot on a bunch of minis including a gunpla. I've got Rosemary & Co brushes that I haven't used a lot, though.

Atom, I have all the grace a dexterity of a can opener and I haven't broken my Godhand clippers yet. They are nice for sure, I use them to cut pieces that aren't super thick and it cuts the plastic like butter.

I have a Series 7 brush that I have used, maybe, 3 times out of fear of ruining it. In the same period of time I've owned it, I've gone through a handful of Monument Hobbies brushes.

You could probably pick a few choice natural butthairs and match the quality of that brush with a little ingenuity.

I bought the first model of Citadel clippers way back when. A+ for their longevity and usefulness. I don't remember what I paid though, way too many years ago. I think there is one tool that is worth spending a little extra on for better quality and features: a hand/pinning drill. I went through several cheap, bad choices before finding one I liked using and did everything I needed it to.

For clippers I always go with the Xuron Professional Sprue Cutters. Part number 2175ET, not 2175. The 2175 have a rounded tip, while the 2175ET have a very sharp pointy tip. Runs about $20-25 USD.

I have the Godhands, and I love them. I use them sparingly, though. There are a lot of scary warnings on the package about all the things that can damage them. (If you haven't done it yet, you can read all that stuff with the google translate app on your phone and just pointing your camera at the text)

"Live, laugh, love." - The Emperor

I use the $50 pair of god hands and the $12 beginners version. Both are worth it for me, the $50 pair allows you to cut closer to the model without damaging it while leaving less cleanup. When building an army or squad, this saves a ton of time. The beginner pair has a very pointy tip and gets you into those hard-to-reach places, while still cutting better than any other brand. I have used just about every cutter on the market including Army Painter, Citadel, Harber Freight versions, and some on Amazon. Both versions of god hands beats them all out. I also bought the medium artificer brush from Citadel and painted all the details on all the models in the Leviathan box with it. I was super impressed, it kept its tip and did a good job. I then used it with metallic paint and it wore it down quickly. I decided to buy another one from Citadel online, but this second one was horrible. Its tip wasn't as sharp as the first one and the bristles were softer making it hard to do any fine detail work at all. I can only conclude that these brushes are hit-and-miss at best. I will try to buy one more at my LGS so I can examine it first before purchasing.

I love all Tabletop Minions videos!

Godhands: Yes for Gunpla. They don't damage plastic as much as normal clippers do, which can be a semi-important thing and you can use them to cut the gates right next to the plastic with no damage to the surface. But for most wargaming stuff cheap hardware store clippers will do fine. Brushes: TBH I've used a ton of cheap art store brushes and basically considered them disposable. For a hobbyist modeler or gamer it really won't make a difference IMO.

I have used the cricket software to create my own stencils but it is not user friendly. I have made waffle patterns and what not but gets very complicated. Thanks for the recommendation on some other software options!

On the godhand - they're a lot like a really really nice brush, in that you don't use it for everything. On minis, the thing I use the godhand for the *most* is excising minis from shitty attached bases - on reaper bones, on board game pieces, and on other models where you need a clean non-crushing cut on something - since they do a clean slice, they don't damage anything and you can slowly chip away at attached stuff you don't like without ruining the parts or the sculpt you value.

I bought a vortex mixer and I do use it. I have been able to revive paints that I thought were dead.

I bought the entire Artis Opus brush line and they are still in their wonderful cases because I am too afraid to use them. I have gone to the craft store and also bought cheap versions of the dry brushes (same shape, size, etc.) to practice with before using them and yeah... I don't regret it at all. I think I may work up the courage to use them someday...but I want to make sure I know how to clean and care for them before I do. I'm not always nice to my brushes.

Good question! I have this handy foam cutter from the Army Painter I have bought in a terrain building box set. So far I never used it. Then I have a bunch of cheap brushes and paints, so much paints! I think I only used about a quarter of all my paints. 😅 If you will ever use the god hand nippers, I would be very interested in a review ;)