man those look great! nice job! i'm going to get this setup for my 4 Runner. Thanks for the help.
@MichaelWilliams-qk9rm4 жыл бұрын
Great install video my man. I’ve been eyeing these light myself. I have their fog pods already installed. Keep up the good work.
@TheGoodVibesProject4 жыл бұрын
Michael Williams thank you for watching and for the comment!
@MrJdubes3 жыл бұрын
Great video. I think it convinced me to make this my next project this spring! As you mentioned its kinda hard to do projects in the snowbelt this time of year without a garage.
@darinb47942 жыл бұрын
Perfect and spot on. I installed this myself based on this video... by the way on each side of the engine bay there is a plastic piece that runs from front to back( right next to each quarter panel.. tuck the wires under there.
@Dreaman7777 Жыл бұрын
Even if i didn't have the same model of led lights, I found your video very helpfull. Thank You !
@KT-bd5ym2 жыл бұрын
Great. Just as an addition, i sprayed the hood brackets and bolts that mount the lights to the bracket with Rustoleum, to reduce any rust beginning.
@seandalejackson25252 жыл бұрын
I appreciate you doing all this without a garage Brotha!!
@jonnyhalo10416 ай бұрын
I had the same problem discovering that I should put the light on the bracket first for ease. Good job man looks great. You should get some cali raised tri color led bulbs for the headlamps, super convenient and rad AF. ✌🏽
@aj_ballard3 ай бұрын
Good video you hairy beast! i need some of these lights.
@Impalals20014 жыл бұрын
great vid! I have the same set up with the Baja squadron fog lights as well. I do have the Tacoma Beast Headlights and some raptors grill lights. I just received my ditch lights (Tacoma Beasts as well) today so this weekend I will be installing them, can't wait.
@TheGoodVibesProject4 жыл бұрын
Ron S that’s awesome man! I want to get the new head lights and raptor lights, along with all the other stuff on the list lol you now how it goes! Good luck building you’re truck!
@idk_j39274 жыл бұрын
This is going to be helpful, it’s to the point and spot on.
@goprozack42555 жыл бұрын
Very good video and high quality. Please keep making videos for the tacoma one of the best review channels I've seen and I've seen all of them lol
@TheGoodVibesProject5 жыл бұрын
GoproZack thank you!
@jefftaylor97472 жыл бұрын
Great video, thanks for showing the wiring too! Gonna put ditch lights on my to do list!
@justinmiller70554 жыл бұрын
Great vid, I got the same brackets for my taco with rigid pods
@TheGoodVibesProject4 жыл бұрын
Justin Miller nice! The rigid pods are great pods!
@IAmCivuhL3 жыл бұрын
The music was great. Good video
@briancalibergbmd Жыл бұрын
I installed these this past weekend....I mounted the lights on the brackets first and I too had an issue with the hood moving on the passenger side only. Just had to adjust it a bit on that side and it was fine.
@Yettee02015 жыл бұрын
Nice install. Just gotta swap those halogens to LEDs
@TheGoodVibesProject5 жыл бұрын
Yettee0201 thanks! Yeah, that will complete it for sure!
@andrewcollins8793 жыл бұрын
I actually mounted the pods on the bracket and then attached it to the hood mount
@defkid310bqad74 жыл бұрын
Awesome video!! Very much needed. I installed some cali raised Ditch lights on my 4runner this helped alot!
@TheGoodVibesProject4 жыл бұрын
Defkid310 Bqad right on! Thank you for watching, I’m glad it could help! 🤙🏻
@jtwarburton19914 жыл бұрын
Great video man, helped me make my decision to get these and install my self.
@TheGoodVibesProject4 жыл бұрын
Josh Warburton right on! Thank you! They are a super easy install
@rickm42954 жыл бұрын
Im definitely gonna get that kit !! Ive had it in my cart like 3 times and bail on it , lol. Im gonna get them this weekend now for sure. Great video brother , good job !!
@TheGoodVibesProject4 жыл бұрын
Rick Mccraw right on!! That’s awesome! I do that every day with something for the truck. I think you’ll be stoked with these though. Thank you for watching!
@bluegrassdroneservice86693 жыл бұрын
They are on wish for $12
@ChineseSpyBalloon693 жыл бұрын
Great video. Clear and concise instructions.
@joli783633 жыл бұрын
Cool brotha
@garyaaron84253 жыл бұрын
Nice install video. This is one of the last mods I want to do. Appreciate the video. BTW....mind blown...never ever thought of twisting the electric tape to cut it. I always pulled until it tears. 👍
@seanjohnson68993 жыл бұрын
Can you go thru and drive-thru car wash with the ditch lights?
@r.arabian30562 жыл бұрын
Great video. Installing mine next week.
@ComicalPlum35 жыл бұрын
the bolts where it connects to my hood will not budge and I'm starting to strip of of the bolts from twisting so hard. and yes I'm spinning the right way. any suggestions cause I have the pods just sitting on the kitchen table trying to figure this out
@TheGoodVibesProject5 жыл бұрын
River_Potomac_Guy ah man, that’s a tough situation. Is it an older vehicle? If so I would try using some Ultra Lube Spray or some PB blaster and let it try to free them up, then try again. Hopefully that is helpful!
@Caseylawton5 жыл бұрын
Maybe try a breaker bar to give you some more leverage? Mine were tough too. I had my hood repainted and they painted right over the bolts
@df86004 жыл бұрын
I just ordered the same package not that it's an issue but the plug n play makes installation much faster. I love cali raised I just keep on buying more and more stuff from them
@juliuslomarda1975 Жыл бұрын
Hey bro, did you use some rubber gasket to avoid water from entering the engine bay thru that wire from the LED?
@BlackJack6614 жыл бұрын
Nice work bro!
@TheGoodVibesProject4 жыл бұрын
Emmett R thank you!! Thanks for watching!
@CoyoteRegulator4 жыл бұрын
Nice video. Good Job.
@TheGoodVibesProject4 жыл бұрын
capitol9946 thank you!
@JadenZeCreator5 жыл бұрын
Hey man I really dig the clean editing and nice sort’ve calm vibe you give off! I don’t have my Taco yet but watching this to give me an idea of what mods I wanna do to mine haha. Anyways awesome video! You got yourself a new sub :)
@TheGoodVibesProject5 жыл бұрын
washthebrain thank you so much! Good luck with getting your taco!
@MichaelWilliams-qk9rm4 жыл бұрын
Good vibes. You’ll get sucked in to doing all kinds of crazy shit when u get a Taco brother. All of which are fairly easy things to do with the right tools on hand. Good luck.
@CRXPhil2 жыл бұрын
Well done Sir. I will be doing this very soon.
@antoniochacon79854 жыл бұрын
Best video installation so far only wished I could have seen your wiring on the battery
@TechMechRandom3 жыл бұрын
I had to build custom brackets for my ditch lights due to the reflection off my white truck hood. It made it rather difficult to see at night...Also, move them closer to the side of the vehicle rather than towards the center and it will help as well.
@michaelreed16703 жыл бұрын
Lights look great on the hood I’m trying to decide if I should put those on my back rack facing forward or facing backwards. I’ll probably end up just doing both but. Great video on the lights.
@TheGoodVibesProject3 жыл бұрын
Thank you!
@LMH-ug1yb3 жыл бұрын
Did y'all push the cable through the center of that firewall seal that looks like a weird rubber cervix? Or did you push it through between the cervix thing and the metal?
@TheGoodVibesProject3 жыл бұрын
I pushed it through the rubber, not between the metal and rubber
@matthewtercero90542 жыл бұрын
Just got some ditch lights and now my only problem is I'm trying to get wires through firewall but it's sealed tight, does it matter if I kinda cut it or jam it through? Seems like it was easier for you
@mschoenfuss57384 жыл бұрын
Great video! Makes me confident I can actually do it myself! I’m assuming I can purchase that package for my 2019 ZR2 right? Thanks man!
@TheGoodVibesProject4 жыл бұрын
M Schoenfuss right on!
@vinnyvidivici4 жыл бұрын
M Schoenfuss If you find the correct hood mounts, this package will definitely work for you. It’s a pretty novice level install. Hardest part is probably trying to go through the firewall grommet.
@wildrock17664 жыл бұрын
@@vinnyvidivici That part gives me the creeps. Have you seen a video of someone doing it so that I can see how it's done?
@vinnyvidivici4 жыл бұрын
Dan Teich Check out Jesse Rizo’s channel, he’s got a few videos on these installs. I used the clothes hanger technique on my Tacoma and it works like a charm.
@stacksmasher3 жыл бұрын
One thing to mention.... they will hit your windshield if not adjusted right. I wonder how many people have cracked their windshield?
@Iflyfpv7604 жыл бұрын
not sure if i hooked mine up right, everything works, but my little button light stays on even when the key isnt on?
@joeykrueger554 жыл бұрын
Great video. Thank you for posting this 🤙🏼
@californiahandball3 жыл бұрын
Awesome video brother!
@vernon2073 ай бұрын
I use my bracket for a Cb antenna
@twentyonetoone97834 жыл бұрын
Nicely done man, installed them myself today. Had a hard time deciding where to place the cord from the light under the hood, seems like I found a pinch point relatively everywhere I laid it. I did end up popping out the push pin and guiding it threw there, but in between the light and there, it was a tad bit hard. I figure most people just let it squeeze against the plastic and the hood when it sits. Have you had an issues with them not being covered since you installed them? I know some states are weird about that
@TheGoodVibesProject4 жыл бұрын
TwentyOne ToOne thanks for watching and for the comment! I haven’t had the issue of a pinch point. And I haven’t had any issues with having them uncovered. I know some stares that done allow that though.
@jfwatson104 жыл бұрын
Does your button itself light up? I dont see where you hooked your button into your dash lights.
@TheGoodVibesProject4 жыл бұрын
John W. It only lights when the lights are on
@fskrisfx4 жыл бұрын
Where did you instal the relay? Every instal video skips that!....
@TheGoodVibesProject4 жыл бұрын
Fs-Kris-Fx I just coiled up the extra wire, wire tied it with the relay and left it lay on the fuse box lid.
@TFrax4 жыл бұрын
nice vid. are your fogs yellow because of the bulb or the lens? I am looking to get my fogs yellow like yours. can you tell me what you used? thanks.
@TheGoodVibesProject4 жыл бұрын
TFrax thanks for watching! They are yellow because of the lenses. I went with Baja designs squadron sport
@TFrax4 жыл бұрын
@@TheGoodVibesProject appreciate the reply. Thanks
@jordananderson37064 жыл бұрын
Best install video yet
@TheGoodVibesProject4 жыл бұрын
Jordan Anderson thank you!!!
@seansouphaphone5414 жыл бұрын
Got kc lights and a cali switch coming. You think the wiring is mostly the same? From what I've seen the kc lights have a yellow (power), red (acces.), black (ground). Not trying to have the switch lights on 24/7 haha
@HH-zg8zm10 ай бұрын
Wow bright on sides dull in middle time for more lights 🤣
@NFREngine14Bravo5 жыл бұрын
On your switch does the light on the switch stay illuminated? I have the same switch and mine stays illuminated all the time
@TheGoodVibesProject5 жыл бұрын
NFREngine14Bravo no, the way I wired it, it only is illuminated when they are on.
@jfwatson104 жыл бұрын
Nfre how did you do that?
@zacharygraber54 жыл бұрын
Mine’s staying on all of the time, no clue why
@dalastdon5104 жыл бұрын
What size screw and nuts are the ones that locks the pods onto the brackets? Thanks in advance. Looking to buy some anti-theft locking nuts.
@dlyc843 жыл бұрын
Does it matter what order you connect to the battery? Red to battery first or ground first?
@nogears214 жыл бұрын
also it appears you may be double jointed with them thumbs???
@TheGoodVibesProject4 жыл бұрын
Aaron T. Nelson haha maybe🤷🏻♂️
@25falcons2 жыл бұрын
what is the light pattern? are these more of a spot or flood light??
@jomeraquino5 жыл бұрын
Like the video and I bought my own cali raised ditch lights, i am just wondering How’d you run the wire through the firewall did you poke a hole? Thanks
@TheGoodVibesProject5 жыл бұрын
Jomer Aquino thank you!! Yeah, I poked a hole and used a wire hanger and taped the harness to that and pulled it through. You may have to poke a bigger hole with a screwdriver, but I would only suggest not making too big of a hole. To keep water from working it’s way in there, I wanted it the be tight around the wire. Hope that helps!
@jomeraquino5 жыл бұрын
Thanks bro
@cody54952 жыл бұрын
The smaller hardware was zinc.. I would have thrown those out and got stainless from a local hardware store. 4:22
@PyroTekRob3 жыл бұрын
I see this is been up for a while now, How are their side projecting lights holding up? Considering buying a complete kit for my 4Runner.
@TheGoodVibesProject3 жыл бұрын
I actually switched those out for Baja lights a couple months after having them. In my experience Baja lights are the only way to go after trying them
@PyroTekRob3 жыл бұрын
@@TheGoodVibesProject Thanks for replying, I did end up ordering their combo kit. Might need to upgrade later down the line.
@ebx23233 жыл бұрын
Do any part of the harness connect to the negative terminal on the battery?
@kelvindeanpublico7632 жыл бұрын
Where did u buy the lights and bracket bro
@ascentoffroad3 жыл бұрын
Have you ever noticed any glare off of your white hood?
@eltony1225 жыл бұрын
Good video next my 2019 Trd sport 4x4
@TheGoodVibesProject4 жыл бұрын
Tony2 thank you so much!
@CarlosHernandez-tt2uo4 жыл бұрын
Great video...
@bonn17714 жыл бұрын
awesome video!
@seanjohnson68993 жыл бұрын
Does the kit include the wire connectors that you heat shrink?
@matthewschmidt84325 жыл бұрын
can you take a picture of the battery and the part that didnt get recorded and where you connected it all?
@MichaelWilliams-qk9rm4 жыл бұрын
Matthew Schmidt Hooking up the pwr and ground are super easy. Use the ground connection on the drivers side engine bay wall. Just to the right of the battery as your looking at it.
@sahrukhkhan71474 жыл бұрын
@@MichaelWilliams-qk9rm رب
@patbrewer44644 жыл бұрын
Great video! Totally random question off topic, what floor mats do you have in the truck?
@kemuelmorales46173 жыл бұрын
Hey thanks for sharing install. Did you only used the copper to push the wires thru the firewall? After that you took it out?
@TheGoodVibesProject3 жыл бұрын
Yeah, I poked a hole with a small screw driver than used the copper to push through and once it was through I took it off
@tacoma_jon5 жыл бұрын
Just found your channel because this is the exact setup I am looking for. Mind telling how much the whole setup cost you?
@TheGoodVibesProject5 жыл бұрын
jon shearer I believe it came to around $140-$150 total. I don’t remember exactly. It was a package deal at Cali raised led’s web site. For that price I figured I couldn’t go wrong, and I was right. Such a good deal!
@tacoma_jon5 жыл бұрын
The Good Vibes Project that’s a killer price. Thanks for the reply 👍🏻
@motojon762 жыл бұрын
Hey brother! Now that you’ve had them awhile, how have they held up?
@redvelvetclassicrock57733 жыл бұрын
Can i install those on a yaris hatchback
@uhjomo47535 жыл бұрын
Do you think this setup would work with a 2nd gen?
@TheGoodVibesProject5 жыл бұрын
UhJomo I am not sure if this set up would work, but on the Cali Raised web page they have options for second gens.
@GetmeoutofDelco2 жыл бұрын
Are these the zroads brackets?
@junnijune65973 жыл бұрын
Is there any type of bluish tint to these pods?
@chevycoloradoinalaska70184 жыл бұрын
What do people use ditch lights for?
@TheGoodVibesProject4 жыл бұрын
Robert Neal to light up the edges of trails/ the road. At least that is my understanding of what they are used for and what I use them for.
@kadenbarkdull59393 жыл бұрын
How did you wire them to the battery!?
@americansoldier77765 жыл бұрын
Great video!! Thank you! Looks sick!! How hard was it pushing through the firewall? Your yellow fog light are crazy bright!
@TheGoodVibesProject5 жыл бұрын
Lou Jones it was pretty hard at first. I ended up using a larger screw driver to poke a hole to pull it through
@americansoldier77765 жыл бұрын
The Good Vibes Project please do me a big favor, send me a pic where you pushed it through on your firewall to my email jones.louis7@gmail.com Thank you so much!! I’ll do the same thing! You said you used a big screwdriver? Hmmm...
@josiahlopez92434 жыл бұрын
Would this work for my 1999 Toyota 4 runner?
@vitaly63123 жыл бұрын
Currently running 15% off through the end of November. Get yourself some :-)
@sin44593 жыл бұрын
What about the automatic car wash? How did these light hold up
@TheGoodVibesProject3 жыл бұрын
I never took the truck through an automatic car wash. I always hand washed it
@sin44593 жыл бұрын
@@TheGoodVibesProject dam it lol. I live in Minnesota where's theres a lot of salt, washing it by hand is not ideal when its 10 degrees outside lol. I usually do touch less to get the salt off then goes right in my garage.
@roberts44115 жыл бұрын
Where did you get the switch ? Good video
@TheGoodVibesProject5 жыл бұрын
Robert Stalets thank you! I ordered it from Cali raised LED along with the lights, harness, and brackets.
@tacoma_jon5 жыл бұрын
Oh also, new subscriber
@TheGoodVibesProject5 жыл бұрын
jon shearer thank you!
@Pjs-kl1op3 жыл бұрын
What wiring harness did you use
@796andy24 жыл бұрын
Know where my covid $$ is going ! in Pa also , bucks
@josesantana36113 жыл бұрын
Where you get the brackets
@cedricgilbert3 жыл бұрын
👀
@darvinbordenii56573 жыл бұрын
Cali raised LED
@markcasha95514 жыл бұрын
Does your OEM switch light up with the dash lights?
@TheGoodVibesProject4 жыл бұрын
Mark Casha no, it only lights up when I turn them on
@glennarends77334 жыл бұрын
That's what I'm searching for, the placement of the red 2 wire, so she lights up when the dash is on
@norcaloffgrid70784 жыл бұрын
What fog lights do you run?
@TheGoodVibesProject4 жыл бұрын
NorCal OffGrid707 Baja designs squadron sports
@dallass074 жыл бұрын
Where did you find the OEM switch?
@jvon20113 ай бұрын
Cali Raised has a ton of OEM style switches on their website
@nogears214 жыл бұрын
are you from Pennsylvania?
@TheGoodVibesProject4 жыл бұрын
Aaron T. Nelson I am
@diziscurran4 жыл бұрын
What state you in im mid Atlantic!
@TheGoodVibesProject4 жыл бұрын
diziscurran pa
@diziscurran4 жыл бұрын
@@TheGoodVibesProject nice im in baltimore if you got a ig follow me @diziscurran wouldnt mind getting some tacos together